No registered window for:w0

Hi all,
we are using jdev 11.1.2.3 and wls 10.3.5.
We have a problem at production environment we get No registered window for:w0 error a lot of times at the logs but we cannot produce this error at localhost.When this error comes system running very slowly and sometimes users cant login system.Sometimes it recovers itself so system running normally but sometimes we kill weblogic server and restart the server again to solve this problem.I saw at the forum somebody wrote about this error but no answers yet.
Any idea?

There is no advantage when you turn off application module pooling. This is a test scenario you should do with your application on the developers pc. It forces that an application module is returned back to the pool for each and every request. This normally only happens if the server is running low an resources (application modules) and needs to reuse existing application modules to service request. This does not happen on a developer pc as you normally work alone and you always get the same application module.
On a server with multiple uses a a given point in time, depending on some configuration parameters, the application modules are reused. this means the current state is save and then restores for the next user request. However there are some scenarios where you have to save some of the data yourself. For more info check out JDev: Always Test Your App with ApplicationModule Pooling turned off | JDev &amp; ADF Goodies
Making the test will turn up problems with activation/passivation on the developers pc which would normally only turn up later in production.
Your description of the cpu usage is exactly what I would expect in such a case (user request can't be handled as there are no resources left, an am gets cleared but the state of the am can't be reconstructed -> something is missing resulting in your error).
For more info on stree tests read Andrejus Baranovskis's Blog: ADF Performance Marathon - 22 Hours Stress Test
and Andrejus Baranovskis's Blog: Experimenting with ADF BC Application Module Pool Tuning
and https://blogs.oracle.com/onesizedoesntfitall/entry/new_recording_on_using_jmeter
Timo

Similar Messages

No registered window for:w0 error using Jdev 11.1.2.4.0

Hi,
We are using JDev 11.1.2.4.0 version. We have created an ADF application and deployed it to weblogic server 10.3.5.0.
When we run the application in IE 9 "No registered window for:w0" error appears in the logs. But for IE8 there is no such error. For mozilla 13 also there is no such error in the logs. Any pointers to it.

Hi,
I think you will have to run this through customer support (if you have a support contract) because I don't remember a discussion about such a problem here on OTN. May be mistaken though. The error sounds like a failure in the ADF Faces windowing manager
Frank

55mm plugin 6.0 / Can't open the register window in FCP 6.02

Hy FCP Useres,
does anybody have a solution for the 55mm plugins
in FCP Studio 2 / FCP 6.0...I can't open the options
register window in FCP to register the plugin settings...
Downloading the latest version on the digital filmlab webside
doesn't help...has anyone an idea????
Thanks Martin

The latest version of Final Cut Pro is 6.0.5.
Use the software updater to get to that version.
My guess is the 6.0.1 was released before FCE 4.0.1.
"In general, Final Cut Pro can open a Final Cut Express project if it was last modified in a version of Final Cut Express that was released before the version of Final Cut Pro that you are using."
http://support.apple.com/kb/TA24708?viewlocale=en_US

Error deploying data tier application to SQL Azure at "Registering metadata for database" step ... should I care?

I'd like to move an on-premesis SQL Server Database to SQL Azure. I've used SQL Mgmt Studio to Extract Data Tier Application and save my db as a dacpac file. Now I'm connected to my Azure server and I've chosen to Deploy Data Tier Application. I select my
dacpac and the deploy starts but then on the last step "Registering metadata for database" it times out. I've tried it a couple of times and each time the deployed database is there and appears to be fully populated, but I'm not sure if I can ignore
that error and continue. What is supposed to happen in that step, and should I expect it to fail when deploying to SQL Azure?
I'm following the steps here http://msdn.microsoft.com/en-us/library/hh694043.aspx in the Using Migration Tools > Data-tier Application DAC Package section, except that to deploy there's no SQL Mgmt Studio > Object Explorer [server]
> Management >"Data Tier Applications" node, so I'm deploying by right-clicking on the server name and choosing "Deploy Data-tier Application".
My (total) guess here is that it's deployed the database fine and it's doing whatever magic happens when you register a data tier application, except that it's not working for SQL Azure.
I'm running against a server created for the new Azure service tiers, not against a Web/Business edition server.
The full details of error I get are below.
thanks,
Rory
TITLE: Microsoft SQL Server Management Studio
Could not deploy package.
Warning SQL0: A project which specifies SQL Server 2008 as the target platform may experience compatibility issues with SQL Azure.
(Microsoft.SqlServer.Dac)
ADDITIONAL INFORMATION:
Unable to register data-tier application: Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.9213&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
The wait operation timed out
BUTTONS:
OK

Hello,
The registration process creates a DAC definition that defines the objects in the database, and register the DAC definition in the master system database in Windows Azure SQL Database.
Based on the error message, there is timeout error when connect to SQL Database. Did you deploy a large database? When move large data to Azure SQL Database, it is recommended to use SQL Server Integration Services (SSIS) and BCP utility.
Or you can try to create a client application with the Data-Tier Application Framework (DACFx) client tool to import database and handle connection loss it by re-establish the connection.
Reference: http://sqldacexamples.codeplex.com/
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

MediaSource sub-windows for Album/Artist/Genre have gone

My wife's Zen Micro (2--02) doesn't seem able to have its music organised by Creative MediaSource Explorer.
I'm sure that MediaSource used to display not only the tracks but had little sub-windows where you could select Album, Artist or Genre and get all the tracks associated with your choice.
However, all that I get now is a list of filenames. OK, I can click on these to get the next folder level which seems to be the album name, then further click to get to the track(s).
What I can't do is get the thing to list all tracks or all albums or all genres. It's just hopeless.
MediaSource, as I say, used to show little sub-windows when I had my Zen Xtra but now my wife's Zen Micro's been added and everything upgraded, these sub-windows for Album and Artist do not appear as they do in the illustration with the blurb...not even with my Zen Xtra.
Further, the Zen Micro doesn't seem to have a list of selected tracks like my Xtra does. The help files seem to refer to one but I'm blowed if I can find it, either via my PC or via the player's own display.
How do you see what's coming up next to play?
Everything's upgraded to the latest using Auto update and I re-loaded the f/w.
Can anyone tell me what I'm doing wrong, please?

In the bar above the list of tracks there should be a Find box. Next to this is a View button, next to that is a small downward triangle which, when clicked, allows you to select Genre, Album, Artist. Play around with those 2 buttons and you should be able to get back the view you want.
To view the selected tracks click on View in the menu bar and then choose Now Playing Window.
PB
Message Edited by PeeBee on 07-8-2005 04:47 AM

Some artists don't qappear in browser window for a playlist

I've been struggling to find a way to browse a large library of classical music. The browser window is a great idea but I can't find a way to add a browser window pane for the Composer tag. So I selected all the tracks with composer=beethoven and made a playlist.
I notice that some artists for tracks in the playlist don't appear in the Artist browser pane. (For example, Szell/ Cleveland Orchestra.) I don't know how many Artist names are missing from the Browser's Artist but there are at least 2 missing.
I can see the Artist name "Szell..." in the track listings for the playlist. If I'm browsing the library, I see "Szell ..." in the Browser window Artist pane. I just don't see "Szell ..." in the Artist Pane of the browser window for the Beethoven Playlist.
I tried deleting the Beethoven playlist and re-creating it. I get the same problem again.
I'm using iTunes for Windows v 4.7.1.30. I haven't upgraded to the latest iTunes for Windows because I see reports of problems after the upgrade.
Bill

My quess on weather or not an artist's name appears
depends on the nature and quality of the CD. On my CDs
of Beethoven symphonies or piano concertos Beethoven's name
will appear.
As I said in my first message, the artist name appears in the track listing. I have edited the tags to show the correct composer ("Beethoven" in this case) and to show the soloist then conductor and then the orchestra in the artist tag. ("Szell/ Cleveland orchestra" in this case.)
I see the "Szell..." in the artist field for the tracks for the symphonies conducted by Szee in my library. When I select Library in the source list, I see "Szell..." in the Artist Browser list. However, when I select the Beethoven playlist, I don't see "Szell ..." in the Artist Browser list. I see the tracks listed and the Artist field says "Szell ..." as expected.
This isn't a problem with the information in the CDDB database iTunes uses to get the tag values it assigns to tracks from a CD. I've edited the tags to fit my conventions.
Bill Hunt

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Open a link in new window for .doc, .xls, .pdf

How to link a PDF, word, & Excel file in fla by clicking
a button?
That link will open seperate window for any of these document
with the swf file still open in the background.

vveena123 wrote:
Hi everyone,
I immediately need help,plz help me.this is not the way to get help around here
try stating the problem professionally, without the assumption that your problem is important to others
I have a jsp which has a link that should open in a new window.
when the user clicks again the same link it should not open in another new window instead it should open the previous window.this has nothing to do with java or jsp
this is an html target question
testing
say if a user clicks the link 5 times it shud not open 5 windows instead only 1
Thanks in advanceuse target="new" i think

How do I create a new window for the iTunes store?

Hi,
I have the latest iTunes update on a Windows PC, but I can't seem to open any new windows for the iStore like you used to be able to, so you have to come out of your iTunes library (annoying if you want to check that you haven't already purchased a song you're looking at etc.).
Please tell me there is a fix (easy or difficult) for this!!
Matt
P.s. I have the latest iTunes update.
PLEASE HELP!!!!

Reboot the ATV and try it again. If it still won't play correctly, find the file in your iTunes store purchase history, click on the "Report a Problem" link, and report it to iTunes store support.

I'm sure this is a setting fix, but can't find it-. All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top. How do I adjust so none of them open unless I choose to?

I'm sure this is a setting fix, but can't find it…. All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top. How do I adjust so none of them open unless I choose to?

Remove the check in the box "Reopen windows when logging back in":

How can I shut off all of the pop-up windows for all the Firefox updates?

How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
Help!
Thanks,
numetro

Is it possible that her computer is infected with malware.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

How to Suppress the POP UP window for Print out Device

Hi All,
I have One ALV Grid report and in this report I want to SUBMIT another report which, when executes gives the POP UP window for Printer Device and sends the output to that device. if we give LOCL, sends output to Spool.
So I want to Suppress that POP UP Window and by default that POP UP window should take 'LOCL' as Printer Device.
Thanks in advance,
Helpful answer get awareded.

On the submit command is a spool parameters option.
The addition WITHOUT SPOOL DYNPRO suppresses the print dialog box that is displayed as standard when you use the addition TO SAP-SPOOL.
The addition SPOOL PARAMETERS is used to transfer the print parameters in a pri_params structure that belongs to the data type PRI_PARAMS from the ABAP Dictionary.
PRI_PARAMS-PDEST specificies the output device.

Is there a way to make the flyout window for the adjustments panel close automatically?

The flyout window for the tool on the adjustments panel is OK, although I'm not thrilled that it takes up space inside of the image. Is there a way to either make it open within the panel the way it did in CS5 or close automatically when you have finished making adjustments?

Just to help with terminology in the future...
The Adjustments is not in itself normaly called a ''flyout window'', and it operates like other panels and responds to the settings R_Kelly has mentioned.
There's a menu sometimes called the ''fly-out menu'' that you get when you click the little icon at the upper-right corner of the Adjustments panel.
I just wanted to mention the distinction because experts may at first be confused if you describe a panel itself as ''flyout'', even though that's what they do.
-Noel

Windows for Mac hangs frequently, how can I stop this?

I have Windows for Mac 98, and lately I have been using that a lot to type some papers, usually for seven hours a day for long stretches. What has happened is that at least once a day, the Windows program suddenly freezes without any warning, and the beachball starts spinning. I can't do anything to stop this from happening. I usually wait a few minutes and then go to Force-Quit and shut it down (the message in Force-Quit is that Word is not responding). I can usually recover some of the work when I go to Microsoft (Auto) Recovered Documents but usually I have lost a lot of the work I have done.
After this happening regularly, I started to save the work frequently, and hoped that if it crashed again, I could at least save all the work I had done. However, despite doing this, the recovered file had not saved the work until the most recent save, which I thought was strange.
As my work involves frequent typing in Word documents, this is a big worry.
I type .doc and .docx documents using Windows but from my recall (but I am not sure about this), both types of documents are involved in this problem.
How does this problem arise? Does it have to do with the memory? The Windows is using up too much memory perhaps? Would it be the same with Pages? I don't recall this ever happening with Pages but I suppose I haven't typed really long documents in Pages yet.
My computer is MBA version 3.2. I usually have other programs running at the same time: two browser windows, Pages, iTunes, vlc, Skype, and a program for using wifi with a USB stick. I should close as many programs as I can, I suppose while I am working in Windows, I suppose. Anything else I can do?
Saving frequently helps but not as much as I thought it would.
Does it have to do with my using .doc documents in this Windows program which is a .docx program? Should I install the older Windows for Mac program on the computer? Can I run the two versions of Windows for Mac simultaneously on my computer?

applecore_eater wrote:
I am using Word and it hangs frequently.
(1) Does it hang or does it crash frequently?
For the difference, see
How to tell an application crash from a hang
<http://marinersoftware.corphelp.com/kb_article.php?ref=5501-WIPV-2930>
(2) Have you installed any add-ons to Word, such as EndNote CWYW?
(3) Are you using any 3rd party font managers, such as Suitcase Fusion?
(4) Are you using any keyboard shortcut or macro managers, such as Keyboard Maestro or TextExpander?

No registered window for:w0

Similar Messages

Maybe you are looking for