No response in sysnchronous proxy interface,not delivering

Hi All,
I have a synchronous contract interface with http to proxy scenario. In few cases like when contract has max line items, it is not delivering to target system and message in RWB Integration engine it is showing status as to be delivered delivered., also showing in XI sxmb_moni entry as log version and no response. When messages with few line items its working fine without any issue and getting response back as well. Also , i have same issue in http to rfc scenario.
Can you please help me to fix this issue, how to make these pending messages in XI to deliver to tartget system and get response back.
Thanks in advance.
Regards,
Rajesh

First thing is XI is not supposed to use for Mass data uploads.
for your problem...
did you check Moni on SAP side? check moni of SAP for any errors? if you don't find anyting...go to SMQ2 and check the queues, if you find messages struck in queue, delete them..if you face same problem after refreshing the queue then ask your basis to increase the number of queues.if still your problem presists, then only solution is sending data in small chunks.
i mean you have split data into parts and send it...hope your problem will be solved...

Similar Messages

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Can I supress BPM for Asyn outbound and syn inbound proxy interface

Hi all,
Is there any other alternate to remove the BPM at asyn outbound and syn inbound proxy interface. Reason because I can create another outbound proxy interface at the receiver. But at receiver side we already invested huge code to develop the sync server proxy. So the intension is, with out disturbing the code Can I make the message flow with out BPM?
Because the reason of removing BPM is for a simple interface like this I don't want to use BPM. souce is JDBC and receiver is ECC 6.0. I know with out BPM it can not be achieved but in PI 7.1 EHP 1 by any chance can we do?
I mean during response mapping from server proxy shall we use look up function to achieve?

This bean I have to use at sender channel right?
Yes
I mean is it is limited to JMS adapter?
No
You can find more information in the Wiki which deals with FILE to RFC synchronous...using the above Module

Could not deliver as2 message to partner: 1000 # null

Hi,
I'm trying to send a message to a partner using AS2, I've already defined the MDN and can see the message in SXMB_MONI pending.
When looking to the Seeburger I can see the message with status " Error on send, will be retried " with the following error:
Could not deliver as2 message to partner: 1000 # null
I didn't find any information about this 1000 error, so I went to communication channel (RWB) Audit logs and got:
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 1000 # , SEEBURGER AS2: 1000 # .
In NWA log Viewer (Alert Java) I have:
error occured! Caused by: com.seeburger.http.base.SSLConnException: response of server was ''
at com.seeburger.http.base.SSLApacheConnection.checkHttpResponse(SSLApacheConnection.java:3759)
at com.seeburger.http.base.SSLApacheConnection.doPost(SSLApacheConnection.java:964)...
and
Error while executing AS2 plugin: Could not deliver as2 message to partner: 1000 # null [LOC: Error while executing AS2 plugin: Could not deliver as2 message to partner: 1000 # null.execute] Caused by: java.lang.Exception: com.seeburger.as2.exception.AS2PluginRetryException: Could not deliver as2 message to partner: 1000 # null
at com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:331)
at com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:202)
at com.seeburger.frame.core.FrameWorkListener.syncNewData(FrameWorkListener.java:530)
What configuration do I have to make?
Thanks,
Pedro

Hi
This is a configuration problem at your AS2 partner side. Please check whether the configuation at partner side is correct or not.
Also check the receiver AS2 url , valid or not
Regrads,
Dhanish

Receiving Open Interface not picking Inter-Org records from Interface

Hi,
I am trying to receive the inter org transfer through the Receiving Open interface, but the interface not picking the data from the interface tables (RCV_HEADERS_INTERFACE, RCV_TRANSACTION_INTERFACE).
I am in 11.5.10.2, all the sources worked fine like Vendor, Internal Order, Customer but the issue is with the Inventory source (inter orgs)
Please could you advise what could be the reason for the interface for not picking the Inventory source data from the interface table.
Below are the interface insert script that am using..
INSERT INTO RCV_HEADERS_INTERFACE
(HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPMENT_NUM,
RECEIPT_HEADER_ID,
SHIP_TO_ORGANIZATION_ID,
EXPECTED_RECEIPT_DATE,
EMPLOYEE_ID,
VALIDATION_FLAG
VALUES
(rcv_headers_interface_s.nextval , --Header_Interface_Id
rcv_interface_groups_s.nextval, --Group_Id
'PENDING', --Processing_Status_Code
'INVENTORY', --Receipt_Source_Code
'RECEIVE', --Transaction_Type
'DELIVER', --Auto_Transact_Code
SYSDATE, --Last_Update_Date
-1, --Last_Updated_By
-1, --Last_Update_Login
SYSDATE, --Creation_Date
-1, --Created_By
'ICR-001', --SHIPMENT_NUM
21073573, --RECEIPT_HEADER_ID
2266, -- SHIP_TO_ORGANIZATION_ID
SYSDATE+1, --Expected_Receipt_Date
5543, --Employee_Id,
'Y' --Validation_Flag
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
CATEGORY_ID,
QUANTITY,
UNIT_OF_MEASURE,
ITEM_ID,
AUTO_TRANSACT_CODE,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
SHIP_TO_LOCATION_ID,
RECEIPT_SOURCE_CODE,
TO_ORGANIZATION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
SUBINVENTORY,
LOCATOR_ID,
HEADER_INTERFACE_ID,
VALIDATION_FLAG,
SHIPPED_DATE
--SELECT
VALUES
rcv_transactions_interface_s.nextval, --Interface_Transaction_id
rcv_interface_groups_s.currval, --Group_id
SYSDATE, --Last_update_date
-1, --Last_updated_by
SYSDATE, --Creation_date
-1, --Created_by
-1, --Last_update_login
'RECEIVE', --TRANSACTION_TYPE_RECEIVE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
203, -- CATEGORY_ID
20, --QUANTITY
'EACH', --UNIT_OF_MEASURE
4379131, --ITEM_ID
'DELIVER', --AUTO_TRANSACT_CODE
21073573, --SHIPMENT_HEADER_ID
16566939, --SHIPMENT_LINE_ID
101629781, --SHIP_TO_LOCATION_ID
'INVENTORY', --RECEIPT_SOURCE_CODE
2266, --TO_ORGANIZATION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
13706, --DELIVER_TO_PERSON_ID
101629781, --LOCATION_ID
101629781, --DELIVER_TO_LOCATION_ID
'FG', --SUBINVENTORY
46259, --LOCATOR_ID
rcv_headers_interface_s.currval, --Header_interface_id
'Y', --VALIDATION_FLAG
SYSDATE
Thank you,
Genoo
Edited by: Geno on May 25, 2013 4:54 AM

Any suggestion/advise please!
Thanks,
Genoo

Could not deliver the output for Delivery channel:null

XML Publisher Report Bursting Program is throwing the following exception
Log file
========
XML/BI Publisher Version : 5.6.3
Request ID: 11900899
All Parameters: Dummy for Data Security=Y:ReportRequestID=11900819:DebugFlag=Y
Report Req ID: 11900819
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:DB94
Preparing parameters
null output =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900899.out
inputfilename =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Data XML File:/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Set Bursting parameters..
Temp. Directory:/caop/app02/common/caopcomn/temp
[071713_110919401][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.1.0 - Production
[071713_110919410][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=11900819, user-variable:cp:language=en, user-variable:cp:responsibility=21540, user-variable.OA_MEDIA=http://db172.coresys.com:17204/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=11900819, user-variable:cp:locale=en-US, user-variable:cp:user=PRAYAPUDI, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=11900899, user-variable:cp:org_id=0, user-variable:cp:reportdescription=Care One Salary Change Approval, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Output File
========
<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>11901286</REQUESTID>
<PARENT_REQUESTID>11901285</PARENT_REQUESTID>
<REPORT_DESC>Care One Salary Change Approval</REPORT_DESC>
<OUTPUT_FILE>/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11901286.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>EXCEL</OUTPUT_TYPE>
<DELIVERY>email</DELIVERY>
<OUTPUT>/caop/app02/common/caopcomn/temp/071713_120851408/xdo1_2.xls</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details..</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
XML File
======
<?xml version="1.0" encoding="ISO-8859-1"?>

<CAO_SAL_CHG_APR>
<LIST_G_EMAIL>
 <G_EMAIL>
 <EMAIL>[email protected]</EMAIL>
 <LIST_G_MESSAGE_NUMBER>
<G_MESSAGE_NUMBER>
 <MESSAGE_NUMBER>1</MESSAGE_NUMBER>
 <PERCENT_CHANGE>-98.75</PERCENT_CHANGE>
 <SALARY_CHANGE_AMT>-23,621.00</SALARY_CHANGE_AMT>
 <DATE_CHANGE_MADE>07/16/2013</DATE_CHANGE_MADE>
 <APPROVER_NAME>Veluz, Cynthia Avila</APPROVER_NAME>
 <APPROVER_JOB>Administration|Center|Payroll/Benefits Coordinator</APPROVER_JOB>
 <PERSON_NAME>Donet, Andrew P</PERSON_NAME>
 <PERSON_NUM>131996</PERSON_NUM>
 <LOCATION_CODE>HR - CareOne at Morris ALF</LOCATION_CODE>
 <REGION_2>NJ</REGION_2>
 <JOB_TITLE>Administration|Center|Director of Admissions</JOB_TITLE>
 <CURRENT_ANNUAL_SAL>299.00</CURRENT_ANNUAL_SAL>
 <PREVIOUS_ANNUAL_SAL>23,920.00</PREVIOUS_ANNUAL_SAL>
 <PAY_BASIS>PERIOD</PAY_BASIS>
 <CUR_PAY>11.50</CUR_PAY>
 <CHANGE_DATE>07/21/2013</CHANGE_DATE>
 <SALARY_CHANGE_REASON></SALARY_CHANGE_REASON>
 <EMPLOYMENT_CATEGORY>Fulltime-Regular</EMPLOYMENT_CATEGORY>
 <ERIC_WILLIAMS>[email protected]</ERIC_WILLIAMS>
 </G_MESSAGE_NUMBER>
 </LIST_G_MESSAGE_NUMBER>
 </G_EMAIL>
</LIST_G_EMAIL>
</CAO_SAL_CHG_APR>
Control File
========
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="CAO_SAL_CHG_APR/LIST_G_EMAIL/G_EMAIL">
<xapi:delivery>
<xapi:email server="smtp.coresys.com" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]"
attachment="true"
subject="Salaries Changed Yesterday">
Please do not reply to this email, it is system-generated.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Care_One_Salary_Change_Approval" output-type="EXCEL" delivery="123">
<xapi:template type="rtf" location="xdo://CAO.CAO_SAL_CHG_APR.en.US/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
It is greatly apprecaited, if you can take a look the issue.
Thank you,
-Pradeep.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
 <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
 <xapi:delivery>
 <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
 <xapi:message id="123" to="[email protected]" cc="[email protected]"
 attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
 </xapi:message>
 </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
 <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
 </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Dynamic Archiving in File-Proxy Interface

Hi Experts,
My scenario is File -> Proxy which updates certain data in the target SAP system. The logic in the receiver side is that, if the update fails, then the input file must be placed in Folder A. Else if the update is successful, then the file must be archived to Folder B.
Has anyone done this before? I know File interface is asynchronous so I'm not sure how to handle such kind of requirement.
Appreciate any inputs. Thanks!
Mark

Hi Mark,
If i was you i would use a Async/Sync bridge, in other words a File - Proxy - File scenario (without ccBPM). Check a similar scenario here File-RFC-File(Without BPM) - Process Integration - SCN Wiki
Im not so sure if the proxy interface supports this bridge, also you can do two scenarios, File - Proxy and Proxy - File, then inside the ECC the ABAPers should call the second scenario after the update-
Regards.
Message was edited by: Iñaki Vila

Error!! Could not deliver the output for Delivery channel:null

Hi Friends,
XML/BI publisher : 5.6.3
Oracle Applications : R12.0.6
Bursting program Log file
==================
XML/BI Publisher Version : 5.6.3
Request ID: 993023
All Parameters: Dummy for Data Security=N:ReportRequestID=993022:DebugFlag=Y
Report Req ID: 993022
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:XXXXXGRP02
Preparing parameters
null output =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993023.out
inputfilename =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Data XML File:/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Set Bursting parameters..
Temp. Directory:/tmp
[041210_040045855][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[041210_040045859][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=993022, user-variable:cp:language=en, user-variable:cp:responsibility=50537, user-variable.OA_MEDIA=https://appscgrpdev.oracleoutsourcing.com:443/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=993022, user-variable:cp:locale=en-US, user-variable:cp:user=Dev2, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=993023, user-variable:cp:org_id=90, user-variable:cp:reportdescription=Test_xml_bursting, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Bursting program Out put file
==================
Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
 <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
 <xapi:delivery>
 <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
 <xapi:message id="123" to="[email protected]" cc="[email protected]"
 attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
 </xapi:message>
 </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
 <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
 </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Phone is NOT delivered; my bill made it. (Imagine going to a restaurant not eating and being given a bill.)

I know exactly how you feel. After getting fed up with ATT, I ordered a wireless phone and service from Verizon. I tracked the package and Fed-Ex claimed to have attempted to make delivery attempts 3 times, but that's impossible since I was home 2 of the three times and I never heard a knock or saw anyone from Fed-Ex. I contacted Verizon 3 times telling them about this and they also promised a follow up and I haven't heard from them either.
I'm now 2 weeks into the billing cycle. (Yeah, they are still charging me for service I'm not being provided!) I'm being e-mailed a notice that my statement will be available for viewing and still no phone.
Their phone response is terrible, they never call back and just forget about chatting with them on the web. Everytime it's clear they are in the wrong, their system or customer service rep *magically* "has issues connecting" and you are advised to "please, wait, while we transfer your conversation to another representative".
The wait time on that transfer, it seems, is LONGER than the original wait time, which is already an hour. I don't have an hour to stare at a chatbox waiting for some one.
It seems to me, that Verizon has become very self-important. Back when cable was the only game in town, the cable company always screwed with you when they had to send some one to fix something. It's nice to know that Verizon has decided that they would rather join the ranks of the companies known to not care about their customers concerns instead of showing that there is a better way. It's really crummy that Verizon has gone this route, but it is still nice to know how important my business and their reputation is to them.
As bad as their competitors were, they, at least, had the decency to deliver my phone and charge me after I was actually able to use it. So far, Verizon has proven to be worse. I truly hope I'm wrong and I'm just an isolated incident that will get it fixed. But, I'm wondering am I isolated? Has anyone else had problems with Verizon customer service? Or phone/equipment delivery? Or billing? I just want to know, now. what I've agreed to have 2 years of.
I'll post updates if this thread isn't deleted or my account isn't suspended for complaining.

Let me take your side here. Call verizon billing and tell them you are cancelling the phone and service since you have not received it from Fedex. Verizon requires you to sign for their shipments from Fedex. The carrier then tries three delivery attempts and then sends the package back to verizon.
If you paid by credit card call up and dispute the charge, since your 14 days of previewing has not technically started as to return it within that time frame, just cancel the whole order. Make sure Verizon does not try to bill you .
Dispute, dispute and dispute.
You could have went into a verizon store and got your phone imediately instead of being shipped.
A lost or stolen phone not signed for by you or authorized person is verizons problem and not yours. You don't owe verizon for service not provided or the phone that was not delivered. Call your bank or credit card company and have them remove the charge.

Java webstart proxy bypass not working

java webstart does not work through proxy as the jar files is not getting downloaded. most simple solution would of course be to bypass the proxy for the target server (by entering the server in the system network preference panel). however, that does not work. apparently this bypass is not taken into account by java webstart.
if i remember correctly there once was a possibility to set such things (proxy etc.) in java webstart preferences. this is not existing any more.
how can i solve the problem?
tia
tobias (very desperate)

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

Java Proxy Generation not working - Support for Parallel Processing

Hi Everyone,
As per SAP Note 1230721 - Java Proxy Generation - Support for Parallel Processing, when we generate a java proxy from an interface we are supposed to get 2 archives (one for serial processing and another suffixed with "PARALLEL" for parallel processing of jaav proxies in JPR).
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1230721
We are on the correct patch level as per the Note, however when we generate java proxy from the IR for an outbound interface, it genrates only 1 zip archive (whose name we ourselves provide in the craete new archive section). This does not enable the parallel processsing of the messages in JPR.
Could you please help me in this issue, and guide as to how archives can be generated for parallel processing.
Thanks & Regards,
Rosie Sasidharan.

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

Message Scheduled But is not delivered

HI
I have one large message which is broken in to smaller packets and in r3 and sent to the XI system via abap proxy . My scanario uses a BPM where i have a loop which has a correlation . I collect one message send it and then again the loop collects and sends the next message.
My problem is in SXMB_MONI out of the eight small messages one message shows a green flag (Message scheduled on the outbound side ) . It is not scheduled but not delivered from the IEngine to The PE. Rest all the message are delivered properly.
How can debug such a scenario.
regards
Nilesh Taunk

Hi,
 In SXMB_MONI, did you get a message like this as seen below:-
"Message <MessageID> parked at the process <ProcessID> but not yet processed"
 Solution:
 Check your correlation defined. Use local correlation instaed of global correlation, i.e use the correlation in your block step. This should solve the problem.
Also see the SAP Notes below:
898131 : BPE-RUN: Messages lost when processes are incorrect.
894906 : BPE-RUN: Finding unprocessed messages.
Hope this resolves the issue.
Regards,
Dhana

RFC & proxy adapters not working

Hi Gurus,
We have PI 7.31 single stack installed on our company.
Since the last 2 days, we are not able to have a successful communication between PI and ECC on RFC and proxy adapters.
On the previous days, weeks and months there were no issues like this one.
The error that we are getting on the message monitor is next one for our incoming proxy interfaces:
From the Message Details tab:
Status
systemError
Status Details
Receiver delivery: Cannot determine receiver channel (Cannot find the receiver channel)
Error Category
XI_J2EE_ADAPTER_ENGINE
Error Code
CHANNEL_DETERMINATION_FAILED
From the Message Log tab:
29/04/2015 14:56:42.673
Information
Trying to put the message into the send queue
29/04/2015 14:56:44.448
Information
Message successfully put into the queue
29/04/2015 14:56:44.452
Information
The message was successfully retrieved from the send queue
29/04/2015 14:56:44.456
Information
Message status set to DLNG
29/04/2015 14:56:44.496
Information
Message selected to be processed again when the receiver channel is started
29/04/2015 14:56:44.501
Error
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Channel stopped by administrative task.
For OB proxy calls, this is the error that we get in the sxi_monitor on the ERP:
Status Details column: Error Parsing PI Message
Error while calling Integration Server:
com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task. at com.sap.aii.af.service.administration.impl.cpa.CommonCPA.checkChannelState(CommonCPA.java:57) at com.sap.aii.af.service.administration.impl.cpa.LookupManagerDelegate.getCPAObject(LookupManagerDelegate.java:86) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:487) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
Regarding the RFC adapter, this is the error we can see in the CCM:
Error in processing caused by: RfcException: [qlaspi00.xxx|eq610q0]
 message: CPIC-CALL: SAP_CMACCPTP on convId: 00000000
LOCATION SAP-Gateway on host qlaerp01.xxx / sapgw01
ERROR registration of tp eq610q0 from host
 qlaspi00.xxx not allowed
TIME Wed Apr 29 16:20:22 2015
RELEASE 721
COMPONENT SAP-Gateway
VERSION 2
RC 720
MODULE gwxxrd.c
LINE 3644
COUNTER 5492
 Return code: RFC_SYS_EXCEPTION(3)
 error group: 102
 key: RFC_ERROR_COMMUNICATION
Exception raised by qlaspi00.xxx|eq610q0
On the SM59 tx in the ERP the test connections are failing for the RFC destinations that we are using on this environment, and these were working in the past.
Also, BASIS team notify us that the programs are registered so they don't know that else to do on their side.
The actions I took were:
CPA full refresh cache
Restart all PI components (done by BASIS team)
Stop and start channels
Inactivate and Activate channels
Please notice that all these processes were working in the past and there were NO modifications on the same.
Where can I continue looking on these errors to find the issue?
Any help will be very appreciated!
Thanks in advanced!
Regards.

Claudio
The error indicates that the channel has been stopped. Did you check the administrative logs in the comm channel monitor to see if someone or an ATP schedule has stopped the channel?
Rgds
Eng Swee

XML message ok in SXMB_MONI, but not delivered

Hi there,
I am new to PI and have a question regarding monitoring of an interface.
We have a problem that a SOAP request doesn't reach its receiver.
When I have a look at SXMB_MONI the XML message has status "successfully processed" (race flag as indicator).
But if I check on [http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp|http://<HOST>:<PORT>/MessagingSystem/monitor/monitor.jsp], there I see that the message for the same interface has status "not delivered".
It shows me the following error message:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
How can I investigate more on this to find out why the interface doesn't work?
I have the impression that the monitoring of PI interfaces is quite unstructured.
Is there a good tutorial/blog which shows where to look for this information?
Thanks in advance!

In the message monitoring I've messages with status 'Not delivered'.
If I display them, I just see error messages like
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
How can I see more detailed error messages???

Oracle B2B Payload not delivered to partner through Generic HTTP channel

Hi,
We have a situation where the B2B payload is not delivered to the partner. Below are the steps we followed to set up the agreement and channels.
1. Created a document definition under "Custom" protocol and uploaded the XSD into the document definition.
2. Created the remote partner.
3. Created a generic HTTP channel in the profile tab. Given a HTTPS url and also specified the keystore location.
4. Created the agreement and specified the above HTTP channel in the to-partner channel's section.
5. Posted the message to Oracle B2B through SOAP UI.
6. Message has reached B2B and the agreement is invoked and state of the message is MSG_COMPLETE.
7. In the wire message, I could see the state as complete and packed message is having the payload.
8. Even in the diagnostic log, I could see the http response code as 200.
" [IPT_HttpSendResponseStatusCode] HTTP Response status code: 200"
But, the remote partner is not receiving this payload. I am not sure where the issue? Remote partner is getting an error message as below
Doc Number =%error/ErrorInfo/documentNumber%
Document Type =%error/ErrorInfo/documentType%
Sender =Unknown
Receiver =Unknown
Correlationid =%error/ErrorInfo/correlationid%
ErrorMessage =[XSL.0003.9002] Transformation: No XML source provided
ServiceName =pub.xslt.Transformations:transformSerialXML
Please suggest any clue on how to debug this.
Thanks,
-Sriharish.

We got this fixed by setting the "additional transport headers" in the channel.
Additional Transport Headers: SOAPAction="notify"#Content-type=text/xml
Thanks,
-Sriharish.

No response in sysnchronous proxy interface,not delivering

Similar Messages

Maybe you are looking for