Java webstart proxy bypass not working

java webstart does not work through proxy as the jar files is not getting downloaded. most simple solution would of course be to bypass the proxy for the target server (by entering the server in the system network preference panel). however, that does not work. apparently this bypass is not taken into account by java webstart.
if i remember correctly there once was a possibility to set such things (proxy etc.) in java webstart preferences. this is not existing any more.
how can i solve the problem?
tia
tobias (very desperate)

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

Similar Messages

Server proxy is not working

Hi Experts,
I have a scenario from jdbc to SAP.I have made serverproxy.The proxy was not working.I have test the proxy backend it is working fine,but i am staring jdbc channel the data was not insert in to the database table in sap.I have checked in sxmb_moni in sap r/3 system is showing scuessfully,but data was not sent to proxy.I have put one break point in the code for debugging the proxy.But data was not comming to breakpoint.Kindly help me.
Thanks
Ravi

Hi,
Make sure that you have not done any changes in your XI structure recently otherwise regenerate the proxy and then try agin.
Secondly if you have not done any changes then it's ok. Just one thing, have you used Commit Work just after modifying/inseting the value into database table. If not use this and then try again.
It seems that smoethig went wrong at R3 side because you said data is successful in R3 MONI, so data is reaching to R3 but not going into proxy.
When you kept the break point then were you able to see the debugger screen in R3?
Regards,
Sarvesh

Proxy was not working in sap r/3

Hi All,
I have a scenario from jdbc to SAP.I have made serverproxy.The proxy was not working.I have test the proxy backend it is working fine,but i am staring jdbc channel the data was not insert in to the database table in sap.I have checked in sxmb_moni in sap r/3 system is showing scuessfully,but data was not sent to proxy.I have put one break point in the code for debugging the proxy.But data was not comming to breakpoint.Kindly help me.
Thanks
Ravi

Hi ,
Please try with this link.
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0dec9f5-e9a0-2b10-c1a8-e355d01af932&overridelayout=true

Java 7 Update 11 Not Working with Firefox

For me, the problems described in the thread "Java 7 Update 10 Not Working with Firefox? " Java 7 Update 10 Not Working with Firefox?
are continuing with Java 7 Update 11.
Windows 7 64 bit
Firefox 18
The problem is that "Java(TM) Platform" is missing from the plug-in list.
I've uninstalled Java 7 Update 11 and reinstalled Java Update 9 which correctly installs the plugin and restores Java functionality which was broken immediately upon installing both Java 10 & 11.

981243 wrote:
So why not using Ju11 ? You can workaround the issue. It would sucks but still be safer than using Ju9.
Also ask Mozilla forums if Firefox has options where to search for plugins.
Or try 64-bit Firefox.As I explained in both threads ...
Java 7 Update 10 Not Working with Firefox?
Java 7 Update 11 Not Working with Firefox
... neither jre7u10 nor jre7u11 are working ... and they are BOTH broken with the same problem ... "Java(TM) Platform" pliugin is missing from the plug-in list. It cannot be enabled, because it simply is NOT there. A suggestion was made the jre7u12 will be the "fix" for this issue ... so I installed the Update 12 Preview and it sis ALSO broken, no "Java(TM) Platform" in the plug-in list.
The ONLY Java version that actually works for me is jre7u9.
As far as installing Firefox 64bit ... I see no future in installing a browser that has been discontinued.
http://www.computerworld.com/s/article/9233976/Mozilla_suspends_work_on_64_bit_Firefox_for_Windows
Even though Mozilla relented due to backlash, I continued development will be a somewhat low priority.
http://www.computerworld.com/s/article/9234997/Mozilla_compromises_on_x64_Firefox_after_user_backlash

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working

I'm running OS X Yosemite, Version 10.10 My Adobe Illustrator CS6 is not opening. I have install the legacy Java SE 6 runtime, not working
Also when I click on More Info... button I I get support.apple.com website page, which is blank. When I click on the OK button, same result.
I need help with this, is anyone out there experiencing the same phenomena?

How about this one
Apple Java for Mac | MacUpdate
or
Java for OS X 2014-001

Java.util.ProperyPermission does not work for

Hi again!
I have some problems with a security.policy file. Its content is provided below:
grant{
//Alow the client to connect to any port above 1024
permission java.net.SocketPermission "*:1024-", "connect";
permission java.util.PropertyPermission "user.language", "read, write";
Unfortunately, the java.util.PropertyPermission does not work. I always get the following exception:
java.security.AccessControlException: access denied (java.util.PropertyPermission user.language write)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
at java.security.AccessController.checkPermission(AccessController.java:427)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
at java.util.Locale.setDefault(Locale.java:352)
at essex.kkarad.cache.daemon.SimplePopulationStrategy.doPopulate(SimplePopulationStrategy.java:41)
at essex.kkarad.cache.daemon.Populator.run(Populator.java:42)
Is there any problem with the decleration of the premission? Any ideas?

Err, this may come as a shock, but it's because you changed the system clock.
The Timer class works out the absolute time when to next to do something, and when you change the system clock you break that time.
How much are you changing it by?

Java(TM) Update Registration not working anymore

Hello,
I updated my java 7.u10 to 7.u11 couple days ago.
It's working on IE, but not on Google Chrome and the other browsers.
I re-installed Google Chrome, re-installed java, but neither worked.
I'm clueless.
Everytime after I re-installed java I get this message:
'Java(TM) Update Registration not working anymore'
More details:
Probleemhandtekening:
Gebeurtenisnaam van probleem:     APPCRASH
Naam van de toepassing:     jaureg.exe
Versie van toepassing:     2.1.9.0
Tijdstempel van toepassing:     4ff3180c
Naam van foutmodule:     jaureg.exe
Versie van foutmodule:     2.1.9.0
Tijdstempel van foutmodule:     4ff3180c
Uitzonderingscode:     40000015
Uitzonderingsmarge:     00018894
Versie van besturingssysteem:     6.1.7601.2.1.0.256.1
Landinstelling-id:     1043
Aanvullende informatie 1:     2d10
Aanvullende informatie 2:     2d10958005027d6e0c36717b2dc39dab
Aanvullende informatie 3:     5384
Aanvullende informatie 4:     538468aeed23aef40edb492cc7fa9a53
Lees de onlineprivacyverklaring:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0413
Als de onlineprivacyverklaring niet beschikbaar is, lees dan onze offlineprivacyverklaring:
C:\Windows\system32\nl-NL\erofflps.txt

981243 wrote:
So why not using Ju11 ? You can workaround the issue. It would sucks but still be safer than using Ju9.
Also ask Mozilla forums if Firefox has options where to search for plugins.
Or try 64-bit Firefox.As I explained in both threads ...
Java 7 Update 10 Not Working with Firefox?
Java 7 Update 11 Not Working with Firefox
... neither jre7u10 nor jre7u11 are working ... and they are BOTH broken with the same problem ... "Java(TM) Platform" pliugin is missing from the plug-in list. It cannot be enabled, because it simply is NOT there. A suggestion was made the jre7u12 will be the "fix" for this issue ... so I installed the Update 12 Preview and it sis ALSO broken, no "Java(TM) Platform" in the plug-in list.
The ONLY Java version that actually works for me is jre7u9.
As far as installing Firefox 64bit ... I see no future in installing a browser that has been discontinued.
http://www.computerworld.com/s/article/9233976/Mozilla_suspends_work_on_64_bit_Firefox_for_Windows
Even though Mozilla relented due to backlash, I continued development will be a somewhat low priority.
http://www.computerworld.com/s/article/9234997/Mozilla_compromises_on_x64_Firefox_after_user_backlash

Java Proxy Generation not working - Support for Parallel Processing

Hi Everyone,
As per SAP Note 1230721 - Java Proxy Generation - Support for Parallel Processing, when we generate a java proxy from an interface we are supposed to get 2 archives (one for serial processing and another suffixed with "PARALLEL" for parallel processing of jaav proxies in JPR).
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1230721
We are on the correct patch level as per the Note, however when we generate java proxy from the IR for an outbound interface, it genrates only 1 zip archive (whose name we ourselves provide in the craete new archive section). This does not enable the parallel processsing of the messages in JPR.
Could you please help me in this issue, and guide as to how archives can be generated for parallel processing.
Thanks & Regards,
Rosie Sasidharan.

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

Java Web Start is not working on Firefox 3 Kubuntu 8.04 64bit

Hi,
When I try to access web start demo applications it redirects me to download page. It is not working for both Firefox 3 and Konqueror. If I type form command line javaws it will start some policy editor, which I assume means that web start is working. Is there any way to fix this?
Alfas
I am using:
Firefox 3.0.1
java version "1.6.0_06"
Java(TM) SE Runtime Environment (build 1.6.0_06-b02)
Java HotSpot(TM) 64-Bit Server VM (build 10.0-b22, mixed mode)
Ubuntu 8.04.1
KDE 3.5
Applets were not working so I installed OpenJKD (now they work)
OpenJDK Runtime Environment (build 1.6.0-b09)
OpenJDK 64-Bit Server VM (build 1.6.0-b09, mixed mode)

plugin and webstart are not yet available in 64bit jre distributions from Sun.
These are targeted to 6u12 or there abouts.
/Andy

ABAP proxy Connection not working in ECC60

Hi All,
We have created the proxies in SPROXY and using it in the report..
All the proxy related configuration are done in LPCONFIG, since SOAMANAGER is not available in this version.
My issue is when I try to establish a connection with a non-sap application through this report, I get HTTP 503, Service unavailable....
When I debugged the report, I see this exception from the proxy "no extended message(SOAP_ESERVER)"....
The report in higher versions works, but the connection is intermittent, which means if I try to execute report first time. I get HTTP 200 OK response.
In this system, I have made the configuration in SOAMANAGER. If I try to execute the same report second time, I get service unavailable, and this is weird. I have
checked with the non-sap application and its up and running. The non-sap application is a Java application. I have imported the SSL certificates, created the Logical port
for the consumer proxy created with the necessary transport settings..
I have done all the configurations in both the systems(lower and higher). Is there anything that I am missing here?
Could anyone suggest me why the connection is intermittent and why its not working in lower version?
Thanks in advance

Hi ,
Please try with this link.
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0dec9f5-e9a0-2b10-c1a8-e355d01af932&overridelayout=true

"Use system proxy settings" Not working on Mac OS X Snow Leopard

When I change the network location or when I select "Use system proxy settings" on the connetion configuration dialog.
Firefox is not using the proxy defined on the loction set on Mac OS X Snow Leopard.
I usualy change from work to home, at work I've a proxy and at home I don't, and it's a bit annoying to have to change the proxy twice a day. So I tryed this feature, but It's not working for me.
I've tryed also with Firefox 3.6 (I think) and didn't work either.

I run it from eclipse, and on debug mode i checked the value of
java.library.path, and it was ok.
Any way, how can i do what you suggested on mac?It's just a command line argument, but there's no reason to add it if your
java.library.path is ok. One of its componenents must be a directory where
your shared lib is stored, that's all. BTW, the Mac is unix based isn't it?
Shouldn't it be an .so file then? (just a wild guess)
kind regards,
Jos

I have updated my iTunes to the newest version, 10-25 on a windows XP system. Now my java virtual machine is not working and I need it to run applet window. My Java is also newest version. What can I do to fix/repair my issue?

I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, Thanks

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

HT5682 April 22, just installed the latest update to fix the Java problem, it does not work.

About a week ago I installed a MAC update. I discovered that I was unable to play POGO games. I know that is not up there with all other uses of MAC... let's get back on track here. I have uninstalled and reinstalled, and reset preferences at least 6 times to get JAVA back.
Some of my new BFF sites:
Java for OS X 2013-002: How to re-enable the Apple-provided Java SE 6 web plug-in and Web Start functionality.
Why is Java not working on my Mac?|EA Help
Re: Bridge - Page 2 - Answer HQ   Java POGO
Java for OS X 2013-003    get applet from Oracle
My Intel MAC circa 2009, is running MAC OS X Lion 10.7.5   Safari 6.0.4
Today I received another update from Apple stating it would provide the answer to POGO 6 and you can select certain sites that can be accessed.
This also was a FAIL!
I now know the steps, can access TERMINAL without shaking, have learned to use GO to access UTILITIES. I still end up with JAVA not recognizing that their software has a place in my heart and I truly hope on my computer soon.
I have been playing a horrible game of Solitaire on another site.
Are there others out there with this problem or is it just me? Can anyone suggest anything else?

Thank you BDAua. This is what I typed and the reply from Terminal
java -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06-451-11M4406)
Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01-451, mixed mode)
BTW - this application does NOT show up in the Applications folder and I consider that a bit odd.
I also tried typing Java for my computer to search for and this is what I got under
Overview:
PID: 944
Host: localhost
Main class: <unknown>
Arguments: <none>
JVM: Java HotSpot(TM) 64-Bit Server VM (20.45-b01-451, mixed mode)
Java: version 1.6.0_45, vendor Apple Inc.
Java Home: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
JVM Flags: <none>
Heap dump on OOME: enabled
I hope something is helpful within all of this info!

Java persistence: sequence generator not working in expected way.

Hi,
I just played around with java persistence api and found that sequence generator annotations for making new primary key value not working correctly in my code. following is part of my code related to this problem.
in entity class:
@SequenceGenerator(name="mySeq", sequenceName="MY_SEQ_IN_DB")
@Id
@GeneratedValue(strategy=SEQUENCE, generator="mySeq")
@Column(name = "UPLOAD_ID", nullable = false)
private Integer uploadId;
I have a sequence called MY_SEQ_IN_DB in my oracle 9i testing db. When I ran the code to save a new entity instance to database I found that the new upload id is not the one that should be created from the MY_SEQ_IN_DB sequence, while the sequence was not increased either. It's instead something starting from 97 (in my pc), and increased just like a sequence, but every time I reran my code the sequence restarted itself again beginning with 97(of course the insert failed with primary key conflict). the behavior just looks like it's a sequence created and managed totally by the persistence api or toplink itself (I guess).
So, my question is, is this a designed behavior or have I done something wrong to make it not using the correct sequence in the db?
I used hibernate before, and assigning new primary key from sequence in this way works fine.
Thanks
JC.L

There are some things in Java which can't be serialized. When contained within a higher-level class such as Buttons. A button can be associated with an Action Listener. Now, you can serialize a button; however you can't serialize an action listener - for what should be to you obvious reasons. This is NOT an error and so there is no need to throw an exception when serializing the button.
Basically: Applet sends servlet button, but not listener.

My java is installed but not working

My java is installed and it was working fine a couple of days ago but when i went to restart my computer my java had stop working. I checked to see if my enable java was checked in the security tab, and it is but it's still not working? Is something wrong with my Mac? since i had restarted my safari i'm thinking that was the issue.

Check if your bank has a app for the iPad. It sounds like you are trying to use the bank's web page/site rather than using an app.

Java webstart proxy bypass not working

Similar Messages

Maybe you are looking for