No Results from Amazon WSDL

Hello!
I have a problem with the Amazon WSDL Example in the Flex 4 Book in Chapter 10 (Page 321).
My AWSAccessKeyId is valid, "Connect to Webservice" brings the expected results and I have a crossdomain.xml in my App,but sending the WSDL brings back always the Error-Message: SOAP Response cannot be decoded or nothing.
Changing form wsdl="http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl"
to
wsdl="http://ecs.amazonaws.com/AWSECommerceService/2010-11-01/DE/AWSECommerceService.wsdl"
doesn't make anything better.
What is wrong and how can i analyze what the problem is?
Regards
Uwe

Thanks for the suggestion but that doesn't seem to work. when I tried it came up with the error "Invalid Column Name". I think the reason for this is that the block uses a default select statement something like
SELECT RES.COL1, RES.COL2 RES.COL3
FROM RES
Any tables in the WHERE statement that I specify, must also be in the from statement unless there in a nested SELECT statement.
I think that's right anyway.
Shaun.
null

Similar Messages

I just downloaded an old version of iDVD from a disc I purchased from Amazon (iLife '11). I only downloaded the iDVD portion of it. Now my recent version of iPhoto will not open and I get the message that iPhoto may be damaged or incomplete

I just downloaded an old version of iDVD from a disc I purchased from Amazon. I downloaded only the iDVD portion of the disc. Now when I go to open my new version of iPhoto, I get a message that I cannot open the application because it may be damaged or incomplete. What can I do to get this resolved?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Problem in Flex to get XML result from web services

Hi all
I am struggling a proplem for a whole day, i hope somebody can help.
I am trying to get the list file of files located on the server, so i use flex to access a ASP.NET ASMX web services, that returns all the file names in a folder.
I can see that web servicese worked perfectly, however when i try to get the result from flex, i could not figure out how to get the real data i wantted
public function LoadImage(e:ResultEvent):void{
imageList.dataProvider = e.result;
the e.result has some addtional tags, such as
<GetImageFileListResponse xmlns="http://tempuri.org/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<GetImageFileListResult>
    <images>
      <image>01417_ccurve_1280x1024.jpg</image>
      <image>1915619295407381096.png</image>
      <image>21051802471898733113.png</image>
where GetImageFileList is the operation name used in web service
I am only interested in the data starting from <images> . I don't know why the addtioanl tag has been added.
here is the code i have used in flex.
<mx:WebService
wsdl="http://localhost/Flex/GetImageFiles.asmx?WSDL" id="imageWs">
<mx:operation name="GetImageFileList" result="LoadImage(event)" fault="mx.controls.Alert.show(event.fault.faultString)" resultFormat="
e4x">
</mx:operation>
</mx:WebService>
Thanks in advance!!!

Hi,
Just replace the below line in your code and check...
imageList.dataProvider = e.result.GetImageFileListResult.images;
If this post answers your question or helps, please mark it as such.
Thanks,
Bhasker Chari

How to generate doc/lit/wrapped services from existing wsdl?

Hello,
I am using workshop 10.1 to generate webservices from existing wsdl files from workshop 8.1. The existings webservices are based on an xmlbean utility project.
When I generate the webservice from the existing wsdl file it generates automatically services with doc/lit/bare operations. I found in the known issues that this combination is not supported in combination with xmlbeans.
See: CR283457
XBeans are not supported as parameters or return type for doc/lit/bare operations.
Use of Xbeans as a parameter or return type with doc/lit/bare bindings is not supported in operations or callbacks and will result in a failure during deployment.
Platform: All
Workaround: Use doc/lit/wrapped for services that use XBeans as parameters or return types.
The workaround state to use doc/lit/wrapped for services. My questions is how to do that since workshop has all control over the generation of the webservices? ?:|
Thanks in advance,
Martijn Baels
Software Architect
www.leanapps.com

Hi Martijn
If you do generate web service from the wsdl on a 9.2 project, it always uses jax-rpc types and there's no xmlbeans involved.
If the wsdl is in the schemas folder and the xmlbeans builder is on, then you also have xmlbeans types created by the builder they aren't being used by the web service. You will still have problems, because some of the xmlbeans types may conflict with the jax-rpc types.
so when we generate webservice from a wsdl it will never use xmlbeans type, even if the xml builder is on, because WLS doesn't support start from wsdl with xmlbeans types.
Can you please attach the wsdl and the steps so I can replicate and see the issue?
Thanks
Vimala

Calling an MFL business service from a WSDL proxy service

Hi,
I'm using Service Bus v2.6, and trying to call an MFL business service from a wsdl based proxy service.
I have done the following so far:
- Define an MFL-based business service that writes MFL messages to a JMS queue and reads reply messages off another queue, and it works when I debug this business service by itself.
- Define a wsdl proxy service that routes requests to the MFL business service.
Since the tutorials don't have MFL examples, I'm struggling to get this working. I've tried different ways, but no luck.
Here's my definition of the route node in the Proxy Service at the moment.
1. Call a custom XQuery (.xq file) to convert incoming message to an XML representation of the MFL message, and assign the result to a variable "param1"
2. Use "Service Callout" to call the MFL business service, and set Request Document Variable to "param1" and Response Document Variable to "param2".
When I debug the flow, param2 (reply) comes up as empty, and I don't know how to make it work.
I've turned on the JMS trace etc and the JMS bit is working (i.e messages being written, and read by the business service).
There seems to be something wrong with the way I call it from the proxy service.
Any help would be much appreciated..
Thanks

Hello,
Can you indicate the classpath that you use to run your client, version of weblogic and the version of jaxrpc api that you are using.
As a quick experiment adding the jaxrpc jar files to your classpath one at a time.
This [url http://www.javaworld.com/javaforums/showflat.php?Cat=&Board=Enterprisejava&Number=3801&page=12&view=collapsed&sb=9&o=&fpart=1]chap seemed to have a similar problem to you and solved it by adding the jaxprc-spi jar file to his class path. It may be that the jaxrpc-impl is causing you greif.
Also see this thread:
http://forums.bea.com/bea/message.jspa?messageID=200612003&tstart=0
Hussein Badakhchani
www.orbism.com

Xrpcc modeler error when trying to generate stub classes from a WSDL

I'm trying to generate JAX-RPC stub classes (both client and server side) from a WSDL in which one of the message parts references a complexType element defined in the <types> section of the WSDL. Here is my little WSDL document:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="Book_Def"
targetNamespace="myTypes"
xmlns:tns="myTypes"
xmlns:xsd1="myTypes"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNameSpace="myTypes"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="Book" type="xsd1:BookType"/>
<xsd:complexType name="BookType">
<xsd:all>
<xsd:element name="authors" type="xsd:string" maxOccurs="10"/>
<xsd:element name="preface" type="xsd:string"/>
<xsd:element name="price" type="xsd:float"/>
</xsd:all>
</xsd:complexType>
</xsd:schema>
</types>
<message name="runMyPgm">
<part name="book" type="xsd1:Book"/>
</message>
<message name="getPgmResponse">
<part name="result" type="xsd:string"/>
</message>
<portType name="MyPgmIFPortType">
<operation name="runMyPgm">
<input message="tns:runMyPgm"/>
<output message="tns:getPgmResponse"/>
</operation>
</portType>
... Binding stuff
</port>
</service>
</definitions>
I've tried many combinations of defining my complex type and input message and whenever I run xrpcc using this WSDL as input, I get a Error: Modeler error: invalid entity name: Book (in namespace "myTypes"). Sorry if this is a dumb question, but what am I doing wrong in my <types> or <message> definitions to cause this error? I've had some luck generating stubs when the part types are all simple types, but I've not had any luck with getting a <complexType> definition accepted by xrpcc. Thanks in advance for any help you can offer.

Yes you can specify type mapping in configuration file and probably this will solve the problem, but I've never tested this approach. Perhaps I'm not advanced user. Actually the serializerFactory and deserializerFactory are a little vague for me:(

Web service from intranet WSDL

I have a simple (local) SOAP service (via perl SOAP::Lite) with a valid WSDL (validated with XML Spy). That works fine from a simple client....(provide a server and the service responds with all NFS mounts associated with the server)... the WSDL 'imports" a xsd schema via xsd:import. I can create the web service reference, but when attempting to generate a "Form and Report on Web Service" page I get a "No result Tree to Report on" "This Web service does not have a result tree in its definition that is appropriate for a report. You may wish to run the Form on Web Service wizard instead.".... why can't it read my tree? where can I find the errors (logs) specific to this? Any help would be greatly appreciated.

I have the same problem as posted above.
The Web service has an single numeric input parameter and an output parameter that is an array of objects containing 3 result fields. The web service returns the results correctly in a test harness outside of HTML_DB.
I have listed the WSDL content below. Can you tell what the problem reading the Report Tree from the WSDL might be ?
Thanks
<?xml version="1.0" encoding="UTF-8" ?>
- 
- 
- <definitions name="18_WS" targetNamespace="http://SWISHTST/18_WS.wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://SWISHTST/18_WS.wsdl" xmlns:ns1="http://SWISHTST/_WS.xsd">
- <types>
- <schema targetNamespace="http://SWISHTST/_WS.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
- <complexType name="SWISHTST_CollectCountTable" jdev:packageName="SWISHTST" xmlns:jdev="http://xmlns.oracle.com/jdeveloper/webservices">
- <all>
<element name="array" type="ns1:ArrayOfSWISHTST_CollectCountRecordUser" />
</all>
</complexType>
- <complexType name="SWISHTST_CollectCountRecordUser" jdev:packageName="SWISHTST" xmlns:jdev="http://xmlns.oracle.com/jdeveloper/webservices">
- <all>
<element name="code" type="string" />
<element name="category" type="string" />
<element name="total" type="decimal" />
</all>
</complexType>
- <complexType name="ArrayOfSWISHTST_CollectCountRecordUser" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <complexContent>
- <restriction base="SOAP-ENC:Array">
<attribute ref="SOAP-ENC:arrayType" wsdl:arrayType="ns1:SWISHTST_CollectCountRecordUser[]" />
</restriction>
</complexContent>
</complexType>
</schema>
</types>
- <message name="getCollectionCount0Request">
<part name="pNumlink" type="xsd:decimal" />
</message>
- <message name="getCollectionCount0Response">
<part name="return" type="ns1:SWISHTST_CollectCountTable" />
</message>
- <portType name="_WSPortType">
- <operation name="getCollectionCount">
<input name="getCollectionCount0Request" message="tns:getCollectionCount0Request" />
<output name="getCollectionCount0Response" message="tns:getCollectionCount0Response" />
</operation>
</portType>
- <binding name="_WSBinding" type="tns:_WSPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="getCollectionCount">
<soap:operation soapAction="" style="rpc" />
- <input name="getCollectionCount0Request">
<soap:body use="encoded" namespace="18_WS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" />
</input>
- <output name="getCollectionCount0Response">
<soap:body use="encoded" namespace="18_WS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" />
</output>
</operation>
</binding>
- <service name="18_WS">
- <port name="_WSPort" binding="tns:_WSBinding">
<soap:address location="http://10.1.0.34:7778/RCAHMS_WebServices-NMRSPK18_WS-context-root/_WS" />
</port>
</service>
</definitions>
Message was edited by:
gahamr

Downloading MP3s from Amazon

I downloaded an MP3 from Amazon. The .amz file went to the stacks Download folder. When I dbl click the file, iTunes opens but the song is nowhere to be found. I have the "amazon mp3 downloader app". The original .amz file is still on my desktop. Tried downloading another MP3 song; same thing happens...song doesn't appear in iTunes anywhere.
One of my playlists is "M3U Internet Stream"; I think that's Amazon downloads...but it's empty.
Running iTunes 10.1. I've downloaded several songs from Amazon in the past. Didn't have this problem until recently.

Jeremy610 wrote:
There doesn't appear to be any pattern to this, but when I am downloading new MP3s into iTunes (9.0.2) either from Amazon or eMusic, some of them come in normally and some of them come in without allowing me to edit any of the song information. This can happen even within one album, when all the songs are arriving in the library during the same download session. And yet some allow editing and some don't.
When I right-click on Get Info for either the album's folder or any of the individual files having this problem, it still tells me that I can read and write, under Ownership & Permissions.
Anyone have any ideas how to re-establish editing capability under these circumstances?
actually, i started a thread sometime ago about that exact same problem - with no result. in the end i waited it out and, since upgrading to iTunes 9.x, all is back to normal. no help to you at this point but ... just so you know you're not alone.
what you can try (and i did not at the time - so your milage may vary) is this by *Chris CA*
+Quit iTunes.+
+Open a Finder window.+
+Go to \Music\ folder.+
+Right click the \iTunes\ folder and Get info.+
+Go to the Sharing & Permissions tab.+
+Make sure your username has Read & Write privileges.+
+Directly below are ( + ) and ( - ) signs next to a little gear with a down arrow+
+Click the gear and select Apply to enclosed items.+
+Open iTunes then try again.+
does that work for you ?

I recently downloaded an album from Amazon (a gift) directly to iTunes. I also recently pruchased a song from the iTunes store. In both cases, the songs in the album appear in a lighter print on my iPod and won't play when selected. Will play on comput

I recently downloaded an album (a gift) from Amazon, one option of which is to download directly to my iTunes library (which is what I did). I also purchased a song from the iTunes store shortly after this. In both cases, the music shows up on my iPod touch in a lighter print than the other music on my iPod. When I select it nothing happens. I only plug into the computer a couple of times a month, but I perform all updates as are indicated and I synch my iPod. Note that when I have iTunes up on my computer, the music WILL play directly from the library, just not on the iPod. Any ideas? Thanks.

Hello zayasva
I would delete the songs and download them again, or plug it into iTunes to resync them back on.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT3819 video stream from amazon prime to my TV

i want to video stream from amazon prime to my TV via my ipad, mac book using my apple TV device..

there is no reason to get rid of Apple devices, not when a Chromecast, Roku, or FireTV can be acquired so cheaply.
This is a true statement, but this is a bad option in the long term since your content will be split between different sources, DRM rules, apps, access options, etc. You are going to constantly be running into issues were you want to watch a show that is not available on the device (phone, tablet, etc) you are on. I share "Disgusted_with_apple" frustrations in that Apple has not updated in three years now leaving Amazon FireTV and others with better interfaces and features but having my content locked into Apple's DRM.
Apple was really first to market with a viable TV interface device, and has completely turned the market over to its competitors just by not showing up. And now ATV can not play content, or provide features that ALL of the competitors have. I recently bought an Amazon FireTV and love it. The only advantage Apple has left is the iTunes Store still has more content, but that is not likely to last.

ADFS SSO and SharePoint 2013 on-premise Hybrid outbound search results from SharePoint Online - does it work?

Hi,
I want to setup an outpund hybrid search for SharePoint 2013 on-premise to SharePoint Online.
But I'm not shure if this works with ADFS SSO.
Has somebody experience with this setup?
Here's my guide which I'm going to use for this installation:
Introduction
In this post I'll show you how to get search results from your SharePoint Online in your SharePoint 2013 on-premise search center.
Requirements
User synchronisation ActiveDirectory to Office 365 with DirSync
DirSync password sync or ADFS SSO
SharePoint Online
SharePoint 2013 on-premise
Enterprise Search service
SharePoint Online Management Shell
Instructions
All configuration will be done either in the Search Administration of the Central Administration or in the PowerShell console of your on-premise SharePoint 2013 server.
Set up Sever to Server Trust
Export certificates
To create a server to server trust we need two certificates.
[certificate name].pfx: In order to replace the STS certificate, the certificate is needed in Personal Information Exchange (PFX) format including the private key.
[certificate name].cer: In order to set up a trust with Office 365 and Windows Azure ACS, the certificate is needed in CER Base64 format.
First launch the Internet Information Services (IIS) Manager
Select your SharePoint web server and double-click Server Certificates
In the Actions pane, click Create Self-Signed Certificate
Enter a name for the certificate and save it with OK
To export the new certificate in the Pfx format select it and click Export in the Actions pane
Fill the fields and click OK Export to: C:\[certificate
name].pfx Password: [password]
Also we need to export the certificate in the CER Base64 format. For that purpose make a right-click on the certificate select it and click on View...
Click the Details tab and then click Copy to File
On the Welcome to the Certificate Export Wizard page, click Next
On the Export Private Key page, click Next
On the Export File Format page, click Base-64 encoded X.509 (.CER), and then click Next.
As file name enter C:\[certificate
name].cer and then click Next
Finish the export
Import the new STS (SharePoint Token Service) certificate
Let's update the certificate on the STS. Configure and run the PowerShell script below on your SharePoint server.
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# import it
Set-SPSecurityTokenServiceConfig -ImportSigningCertificate $PfxCert
Type Yes when prompted with the following message.
You are about to change the signing certificate for the Security Token Service. Changing the certificate to an invalid, inaccessible or non-existent certificate will cause your SharePoint installation to stop functioning. Refer
to the following article for instructions on how to change this certificate: http://go.microsoft.com/fwlink/?LinkID=178475. Are you
sure, you want to continue?
Restart IIS so STS picks up the new certificate.
& iisreset
& net stop SPTimerV4
& net start SPTimerV4
Now validate the certificate replacement by running several PowerShell commands and compare their outputs.
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
# get the encrypted pfx certificate object
New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# compare the output above with this output
(Get-SPSecurityTokenServiceConfig).LocalLoginProvider.SigningCertificate
[/code]
## Establish the server to server trust
[code lang="ps"]
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
Import-Module MSOnline
Import-Module MSOnlineExtended
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# set the onpremise domain that you added to Office 365
$SPCN = "sharepoint.domain.com"
# your onpremise SharePoint site url
$SPSite="http://sharepoint"
# don't change this value
$SPOAppID="00000003-0000-0ff1-ce00-000000000000"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# get the raw data
$PfxCertBin = $PfxCert.GetRawCertData()
# create a new certificate object
$X64Cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
# import the base 64 encoded certificate
$X64Cert.Import($X64CertPath)
# get the raw data
$X64CertBin = $X64Cert.GetRawCertData()
# save base 64 string in variable
$CredValue = [System.Convert]::ToBase64String($X64CertBin)
# connect to office 3656
Connect-MsolService
# register the on-premise STS as service principal in Office 365
# add a new service principal
New-MsolServicePrincipalCredential -AppPrincipalId $SPOAppID -Type asymmetric -Usage Verify -Value $CredValue
$MsolServicePrincipal = Get-MsolServicePrincipal -AppPrincipalId $SPOAppID
$SPServicePrincipalNames = $MsolServicePrincipal.ServicePrincipalNames
$SPServicePrincipalNames.Add("$SPOAppID/$SPCN")
Set-MsolServicePrincipal -AppPrincipalId $SPOAppID -ServicePrincipalNames $SPServicePrincipalNames
# get the online name identifier
$MsolCompanyInformationID = (Get-MsolCompanyInformation).ObjectID
$MsolServicePrincipalID = (Get-MsolServicePrincipal -ServicePrincipalName $SPOAppID).ObjectID
$MsolNameIdentifier = "$MsolServicePrincipalID@$MsolCompanyInformationID"
# establish the trust from on-premise with ACS (Azure Control Service)
# add a new authenticatio realm
$SPSite = Get-SPSite $SPSite
$SPAppPrincipal = Register-SPAppPrincipal -site $SPSite.rootweb -nameIdentifier $MsolNameIdentifier -displayName "SharePoint Online"
Set-SPAuthenticationRealm -realm $MsolServicePrincipalID
# register the ACS application proxy and token issuer
New-SPAzureAccessControlServiceApplicationProxy -Name "ACS" -MetadataServiceEndpointUri "https://accounts.accesscontrol.windows.net/metadata/json/1/" -DefaultProxyGroup
New-SPTrustedSecurityTokenIssuer -MetadataEndpoint "https://accounts.accesscontrol.windows.net/metadata/json/1/" -IsTrustBroker -Name "ACS"
Add a new result source
To get search results from SharePoint Online we have to add a new result source. Run the following script in a PowerShell ISE session on your SharePoint 2013 on-premise server. Don't forget to update the settings region
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# region settings
$RemoteSharePointUrl = "http://[example].sharepoint.com"
$ResultSourceName = "SharePoint Online"
$QueryTransform = "{searchTerms}"
$Provier = "SharePoint-Remoteanbieter"
# region settings end
$SPEnterpriseSearchServiceApplication = Get-SPEnterpriseSearchServiceApplication
$FederationManager = New-Object Microsoft.Office.Server.Search.Administration.Query.FederationManager($SPEnterpriseSearchServiceApplication)
$SPEnterpriseSearchOwner = Get-SPEnterpriseSearchOwner -Level Ssa
$ResultSource = $FederationManager.GetSourceByName($ResultSourceName, $SPEnterpriseSearchOwner)
if(!$ResultSource){
Write-Host "Result source does not exist. Creating..."
$ResultSource = $FederationManager.CreateSource($SPEnterpriseSearchOwner)
$ResultSource.Name = $ResultSourceName
$ResultSource.ProviderId = $FederationManager.ListProviders()[$Provier].Id
$ResultSource.ConnectionUrlTemplate = $RemoteSharePointUrl
$ResultSource.CreateQueryTransform($QueryTransform)
$ResultSource.Commit()
Add a new query rule
In the Search Administration click on Query Rules
Select Local SharePoint as Result Source
Click New Query Rule
Enter a Rule name f.g. Search results from SharePoint Online
Expand the Context section
Under Query is performed on these sources click on Add Source
Select your SharePoint Online result source
In the Query Conditions section click on Remove Condition
In the Actions section click on Add Result Block
As title enter Results for "{subjectTerms}" from SharePoint Online
In the Search this Source dropdown select your SharePoint Online result source
Select 3 in the Items dropdown
Expand the Settings section and select "More" link goes to the following URL
In the box below enter this Url https://[example].sharepoint.com/search/pages/results.aspx?k={subjectTerms}
Select This block is always shown above core results and click the OK button
Save the new query rule

Hi Janik,
According to your description, my understanding is that you want to display hybrid search results in SharePoint Server 2013.
For achieving your demand, please have a look at the article:
http://technet.microsoft.com/en-us/library/dn197173(v=office.15).aspx
If you are using single sign-on (SSO) authentication, it is important to test hybrid Search functionality by using federated user accounts. Native Office 365 user accounts and Active Directory Domain Services
(AD DS) accounts that are not federated are not recognized by both directory services. Therefore, they cannot authenticate using SSO, and cannot be granted permissions to resources in both deployments. For more information, see Accounts
needed for hybrid configuration and testing.
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to get save result from EXECUTE from a dynamic SQL query in another table?

Hi everyone,
I have this query:
declare @query varchar(max) = ''
declare @par varchar(10)
SELECT @par = col1 FROM Set
declare @region varchar(50)
SELECT @region = Region FROM Customer
declare @key int
SELECT @key = CustomerKey FROM Customer
SET @query = 'SELECT CustomerKey FROM Customer where ' + @par + ' = '+ @key+ ' '
EXECUTE (@query)
With this query I want get col1 from SET and compare it to the column Region from Customer. I would like to get the matching CustomerKey for it.
After execution it says commands are executed successfully. But I want to save the result from @query in another table. I looked it up and most people say to use sp_executesql. I tried a few constructions as sampled and I would always get this error:
Msg 214, Level 16, State 2, Procedure sp_executesql, Line 12
Procedure expects parameter '@statement' of type 'ntext/nchar/nvarchar'.
So the output should be a list of CustomerKeys in another table.
How can I save the results from EXECUTE into a variable? Then I assume I can INSERT INTO - SELECT in another table.
Thanks

CREATE TABLE Customer
(CustomerKey INT , Name NVARCHAR(100));
GO
INSERT dbo.Customer
VALUES ( 1, N'Sam' )
GO
DECLARE @query nvarchar(max) = ''
declare @par varchar(10) = 'Name',
@key varchar(10) = 'Sam'
CREATE TABLE #temp ( CustomerKey INT );
SET @query =
insert #temp
SELECT CustomerKey
FROM Customer
where ' + @par + ' = '''+ @key+ ''' '
PRINT @query
EXEC sp_executesql @query
SELECT *
FROM #temp
DROP TABLE #temp;
DROP TABLE dbo.Customer
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

Populate report page based on results from stored procedure

Is it possible to populate a report page in APEX based on the results from a stored procedure? If so, how do I do it? Do I write a stored procedure with a ref cursor as out parameter?

I would use a stored procedure to return the values for a form but not for a report. For a
report, I would use a pipelined function. See an example here:
http://htmldb.oracle.com/pls/otn/f?p=31517:146
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

OBIEE Report - filter based on the result from another analysis

Hi,
I am using OBIEE 11g,
I am trying to use a filter which is based on the result from another analysis. I have an analysis A which is as table 1, and I want to filter the respective columns of analysis B (Table B) based on analysis A to remove the duplicates for march 01, 02, and 07 , but it is not working properly. I took a max of start and end time when I created analysis A. Please let me know if I did anything wrong. thanks.
Table 1
Employee Number
Date
IN
Out
Start Time
End Time
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
2015-02-27
12:00
18:00
00:00:00
00:00:00
2015-02-28
8:00
14:00
00:00:00
00:00:00
2015-03-01
14:00
20:00
14:00:00
20:00:00
2015-03-02
16:00
20:00
16:00:00
20:00:00
2015-03-07
14:06
20:02
14:00:00
20:00:00
2015-03-11
16:00
20:00
16:00:00
20:00:00
2015-03-14
8:00
14:00
00:00:00
00:00:00
2015-03-25
14:00
20:00
16:00:00
20:00:00
Table 2
Employee Number
Date
IN
Out
Start Time
End Time
Hours
xxxxxxx
2015-02-26
9:00
13:00
00:00:00
00:00:00
-3
2015-02-27
12:00
18:00
00:00:00
00:00:00
6
2015-02-28
8:00
14:00
00:00:00
00:00:00
6
2015-03-01
14:00
20:00
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-02
16:00
20:00
00:00:00
00:00:00
4
16:00:00
20:00:00
4
2015-03-07
14:06
20:02
00:00:00
00:00:00
6
14:00:00
20:00:00
6
2015-03-11
16:00
20:00
16:00:00
20:00:00
4
2015-03-14
8:00
14:00
00:00:00
00:00:00
6
2015-03-25
14:00
20:00
16:00:00
20:00:00
4

Why avg here?
What columns you want to show in the report?
for a employee for given date if he have 2 rows then you may sum up hours right?
Employee Number
Date
IN
Out
Start Time
End Time
Hours

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

No Results from Amazon WSDL

Similar Messages

Maybe you are looking for