No setup table concept in FI Module.

Hi Guys,
why there is no setup table concept in FI Module.Can any body explain in detail?
Thanks,
chinna
points will be awarded

Hi Chinna,
Go through this previous thread on the same issue
Why at all setup table
I hope this helps u...
Regards,
R.Ravi

Similar Messages

  • Setup table and delta mechanisim

    Hi,
    Can anyone explain in detail setup table concept in LO extraction and
    Delta mechanisim?
    Sridhar

    Hi
    LO Cockpit Step By Step
    Here is LO Cockpit Step By Step
    LO EXTRACTION
    - Go to Transaction LBWE (LO Customizing Cockpit)
    1). Select Logistics Application
           SD Sales BW
                Extract Structures
    2). Select the desired Extract Structure and deactivate it first.
    3). Give the Transport Request number and continue
    4). Click on `Maintenance' to maintain such Extract Structure
           Select the fields of your choice and continue
                 Maintain DataSource if needed
    5). Activate the extract structure
    6). Give the Transport Request number and continue
    - Next step is to Delete the setup tables
    7). Go to T-Code SBIW
    8). Select Business Information Warehouse
    i. Setting for Application-Specific Datasources
    ii. Logistics
    iii. Managing Extract Structures
    iv. Initialization
    v. Delete the content of Setup tables (T-Code LBWG)
    vi. Select the application (01 u2013 Sales & Distribution) and Execute
    - Now, Fill the Setup tables
    9). Select Business Information Warehouse
    i. Setting for Application-Specific Datasources
    ii. Logistics
    iii. Managing Extract Structures
    iv. Initialization
    v. Filling the Setup tables
    vi. Application-Specific Setup of statistical data
    vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
            Specify a Run Name and time and Date (put future date)
                 Execute
    - Check the data in Setup tables at RSA3
    - Replicate the DataSource
    Use of setup tables:
    You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
    Full loads are always taken from the setup tables
    1. Data Flow
    Relevant T-Codes
    a) Initializtion
    LBWE: Maintain Extract Structure, DataSource, Active Status, Job Control, Update Mode
    SBIW, then follow tree menu path: Settings for App-Specific DS(PI) -> Logistics -> Managing Extract Structures -> Initialization -> App-Specific Setup of Statistical Data -> Choose XX Application  -> Delete/Fill Setup(reconstructing) Table content
    RSA3: Check content of setup table
    b) Delta upload
    SM13: Display update table/Extraction Queue content
    RSA7: Display Delta Queue content
    Edited by: Tapashi Saha on Jul 24, 2008 7:33 AM

  • QM SetUp Tables Filling Steps

    Hi Gurus,
    I am trying to fill the setup tables for the QM Module (05).
    Even after waiting for a few hours its not filling any records to the Data Sources.
    Can you please let me know if i need to do anything else like any other settings before filling the             QM Set Up tables.
    When I checked the NPRT   T-Code ...  It shows that the finish date and time along with 0 Number of Documents .
    Can someone please let me know the exact steps for filling the QM set up tables .
    Regards
    Vikram....

    Hi Jorge,
    I have a live BW 3.5 system connected to this live R/3 system and now we are Re-Implementing the same into BI 7.0 System.
    The delta Loads are getting loaded everyday to the existing BW 3.5 System, so I cannot delet the initialization request and i dont see any reason for doing that to fill the setup tables.
    I have to do a Full load to the new BI 7.0 System till 2007 Fiscal year and are planning to load the current fiscal year data during cut over period.
    So,I need to fill the Setup tables to load the Historical Data till 2007 Fiscal Year. Can you please help me out with this issue....
    Regards
    Vikram...

  • Fill setup table 2LIS_03_BX and 2LIS_03_BF at same time

    Hi Guys,
    Can someone tell me whether I can run background Job to fill setup table of 2LIS_03_BX and 2LIS_03_BF at the same time?
    By the way, whether I can run background job by different sever using different filters(site range A, B, C) to filling setup table of 2LIS_03_BX?
    Thanks.
    Regards,
    Rojay

    Hi Rajesh,
    All three data source have setup table concept.
    LO extraction means you should fill the setup tables.
    2LIS_03_BX (Stock Initialization for Inventory Management)
    2LIS_03_BF (Goods Movements from Inventory Management)
    2LIS_03_UM (Revaluations) - captures revaluation data.
    please refer the below document for your reference.
    SAP BW - Inventory data loading step by step(0IC_C03)
    Inventory Data Loading (MM) to BW PRD system
    Thanks,
    Phani.

  • Concept of setup tables

    HI,
    Why there is a concept of setup tables only in LIS/LO,not in other extractors.

    Hi
    You dont expect data to change as dynamically in other extractors than in LIS/LO
    In finance, most extractors are fetching some calculations which are reported after the transactions have been completed
    In LIS/LO, say PO, SO and other transactions are prone to high degree of change and the change needs to be captured.
    Regards
    N Ganesh

  • Error while filling setup table for Quality Mangement D/Sources

    HI Experts,
    Iam trying to fill the QM setup tables.
    Steps iam following are
    1.T-code OLIQBW
    2.Selecting Event QV, QE and gave selection parameters and name for Run.
    3. Execute
    4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
       Exception  CX_SY_DYN_CALL_PARAM_NOT_FOUND
       Date and Time          27.08.2009 11:21:01                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.

    Hi Mansi,
    Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN                                                 
    Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND                                             
    Date and Time          27.08.2009 11:56:20                                                                               
    ShrtText                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLQMER" had to be terminated because one of the                  
         statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                                     
         with the parameter "I_ADDITIONAL_DATA".                                                      
         This parameter is not defined.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                     
         . The exception, which is assigned to the class                                              
          'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither                                               
         caught nor passed along using a RAISING clause, in the procedure                             
          "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                     
          to occur, the running program was terminated.                                               
         The reason for the exception is:                                                             
         The reason for the exception is:                                                       
         Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                               
         with the parameter "I_ADDITIONAL_DATA".                                                
         This parameter is not defined.                                                                               
    Missing RAISING Clause in Interface                                                        
         Program                                 SAPLQMER                                       
         Include                                 LQMER$01                                       
         Row                                     5                                              
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS                                                                               
    Trigger Location of Exception                                                              
         Program                                 SAPLQMER                                       
         Include                                 LQMERU01                                       
         Row                                     488                                            
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS

  • Order is locked by user while filling setup table

    Hi Experts,
    Yesterday while i am filling setup table for 2LIS_DM_VAITM (DBM Sales) data source it got cancelled.
    It showed that " Order xxxxxx is locked by user".
    Because we have DSO concept in our CUBE, we didn't lock users.
    But then the basis checked the users and removed from the system.
    But still after removing the users, when we do the setup filling it still gets cancelled showing the same error.
    Please help on this. Now i am stuck in filling setup section.
    Thanks,
    Thilini

    Hi,
    Thanks. I followed your instructions and removed * , last two check boxes and selected sales org.
    Now i am filling setup and its still running. I used a background job.
    In sm37 it shows as "active"
    But when I check in NPRT, It shows no logs were found.
    I want to know that, is everything fine?
    Setup table is filling right?
    expects a reply please...
    Thanks,
    Thilini

  • Dump While filling setup table

    Hi Frineds,
    We have moved some fields from Cimmunication structute to Extract structure at LBWE.
    We deleted data at setup table and also at RSA7.
    While filling the setup tables it is giving the below Dump.
    Please provide me solution.
    Runtime Errors         COMPUTE_BCD_OVERFLOW
    Except.                CX_SY_ARITHMETIC_OVERFLOW
    Date and Time          02.12.2010 12:41:24
    Short text
         Overflow during the arithmetical operation (type P) in program "SAPLMCEX".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLMCEX" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
          caught in
         procedure "MAPPING_VA_MC11VA0ITM" "(FORM)", nor was it propagated by a RAISING
          clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         An overflow was discovered in an ongoing arithmetical operation with
         operands of type P. Possible causes are:
         1. The result field of type P is too small for the result.
        2. The result or a intermediate result has more than 31 decimal places.
    Missing RAISING Clause in Interface
        Program                                 SAPLMCEX
        Include                                 LMCEXM03
        Row                                     53
        Module type                             (FORM)
        Module Name                             MAPPING_VA_MC11VA0ITM
    Trigger Location of Exception
        Program                                 SAPLMCEX
        Include                                 LMCEXM03
        Row                                     105
        Module type                             (FORM)
        Module Name                             MAPPING_VA_MC11VA0ITM
    Source Code Extract
    Line  SourceCde
       75   MOVE-CORRESPONDING MC11VA2ITM_STR TO  MC11VA0ITM_TAB.
       76   MOVE-CORRESPONDING MC11VA4ITM_STR TO  MC11VA0ITM_TAB.
       77   MOVE-CORRESPONDING MC11VA5ITM_STR TO  MC11VA0ITM_TAB.
       78   MOVE-CORRESPONDING MC11VA6ITM_STR TO  MC11VA0ITM_TAB.
       79
       80 * Felder Mit Sonderbehandlungen
       81   MOVE P_XMCVBAK-SPART  TO MC11VA0ITM_TAB-SPARA.
       82   MOVE P_XMCVBAK-WAERK  TO MC11VA0ITM_TAB-WAERK_VBAK.
       83   MOVE P_XMCVBAK-VGTYP  TO MC11VA0ITM_TAB-VGTYP_AK.
       84   PERFORM CONVERT_PROJ_NUM USING    P_XMCVBAP-PS_PSP_PNR
       85                            CHANGING MC11VA0ITM_TAB-PS_POSID.
       86
       87   MOVE 1  TO MC11VA0ITM_TAB-ANZAUPO.
       88
       89   PERFORM READ_T001 USING P_XMCVBAK-BUKRS.
       90   MC11VA0ITM_TAB-PERIV = T001-PERIV.
       91
       92   MOVE P_XMCVBKD-CAMPAIGN TO MC11VA0ITM_TAB-MCEX_APCAMPAIGN.
       93   PERFORM get_apoplanned_va
       94     USING p_xmcvbak p_xmcvbap
       95     CHANGING MC11VA0ITM_TAB-APOPLANNED.
       96
       97   IF P_XMCVBAK-ABDIS NE SPACE.
       98     MC11VA0ITM_TAB-MCBW_NETPR_AVKM = P_XMCVBAP-NETPR.
       99     IF P_XMCVBAP-KPEIN NE 0.
      100       MC11VA0ITM_TAB-MCBW_NETPR_AVKM =
      101                    MC11VA0ITM_TAB-MCBW_NETPR_AVKM / P_XMCVBAP-KPEIN.
      102     ENDIF.
      103   ELSE.
      104     IF P_XMCVBAP-KWMENG NE 0.
    >>>>>       MC11VA0ITM_TAB-MCBW_NETPR_AVKM =
      106                         P_XMCVBAP-NETWR / P_XMCVBAP-KWMENG.
      107     ENDIF.
      108   ENDIF.
      109
      110 * ROCANCEL ermitteln
      111   PERFORM ROCANCEL_SETZEN
      112           USING P_XMCVBAK-SUPKZ MC11VA0ITM_TAB-ROCANCEL.
      113
      114   APPEND MC11VA0ITM_TAB.
      115
      116 ENDFORM.                               " MAPPING_VA_MC11VA0ITM
      117 &----
      118 *&      Form  MAPPING_VA_MC11V_0ITM
      119 &----
      120 *       text
      121 ----
      122 *      -->P_XMCVBAK  text                                              *
      123 *      -->P_XMCVBUK  text                                              *
      124 *      -->P_XMCVBAP  text                                              *
    Thanks &Regards,
    Anand.

    Hello friend,
    I have got the same dump error. Do you have the solution. How was it done.
    Please respond soon. Thanks.

  • While filling setup table

    hi,
    whilw iam filling setup table iam getting the error
       <b>No extraction structure active or no BW</b>
    in rsa5 and rsa6 i did the procedure
    inlbwe that ds is active
    i deleted the set uptable
    after i fill the set up table
    iam getting this error
    iam experting a solutions from the experts
    regards
    kiran
    plz response to my mail id [email protected]

    Hi Kiran,
    It is not possible to modify the extract structure if
    1. Set up tables have been populated during preparation and contains data
    2. outstanding items in the extraction que (LBWQ) pending updates
    3. Unfinished delta load or items in delta que RSA7.
    What update method are you using ? Serialised V3 or the latest methods like
    Queued delta ? what version of PI are u using. As i assume u also have latest PI or PI > 2001.2.
    When u run SM13, make sure you select * or client and * for user. Also, the
    date selection - make sure u enter date like 01011990 to include any
    document that was posted. You will find some outstanding update records.If u
    find any, try deleting them or else force the update using the collective
    run.
    If you have modified and you get an error, you may have to set back the
    changes and reactivate the extract structure first and then do a collective
    run ( search for a program with R*02)- this program forces any outstanding
    updates for the modules under '02'. This program probably is the same in the
    'job control' but am not sure. It is safe to execute this report which will
    clear any o/s updates.
    Carry out the changes using the following steps.
    0. Lock transactions to be sure no postings are going to take place while
    you are about to make changes.
    1.There is a report you can run to check whethere changes to the extract
    structure is possbile without errors. Report name is RMCSBWCC. Enter all the
    comm tables related to purchasing ilike header, item and SCL while
    performing this check. You should get a green light for permitting changes
    to extract structure.Deactivating the extract structure has no effect so it
    can remain active.
    2. Delete the set up table for 02.
    3. Performa collective run to be sure all qued data is taken into delta que
    (even if u have never initialised).
    4. Delete if you find any in RSA7 for the datasources in question. you will
    lose the data but can be reinitialised later.
    5. Run RMCSBWCC again to check if it is ok for bring about changes to the
    extract structure.
    6. If OK, make the changes necessary and save, generate datasource,
    replicate and perform set up table before init run from BW. make sure no
    collective run is started before completion of init load if you are using
    serialised update.
    hope this helps
    award points if useful.
    regards
    Archna.

  • How to activate Purchase datasource without deleting setup table for others

    Hi Gurus,
    In developement system purchasing datasources 2LIS_02_HDR, 2LIS_02_ITM and 2LIS_02_SCN are active and deltas are also running for these.
    Now acccording to the requirement We need to activate other datasources as well like 2LIS_02_CGR and SGR .........
    To so this do we have to run the setup table again or any other option is there for this??
    As this step would take lots of time in Production and for this downtime would be required which is not feasible.
    Please suggest some solution.
    Thanks in Advance,
    Uday Shankar.

    Hi,
    We will do the setup (Filling and Deleting) concept based on application component it's not based on DS .S you don't have other way.
    Regards
    Ram.

  • Error in Setup Tables for QM Inspection Lots

    Hi,
    I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
    "Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
    Has anyone any ideas of the cause or have you experienced this before?
    Thanks,
    Scott

    Hi,
    The most likely reason that leads to the above error message in your
    system is an inconsistency of the inspection lots.
    To get the inconsistent inspection lot,please check your system in the
    following way:
    - transaction OLIQBW for running Setup table
    - switch on debugging mode
    - set break point in the function  QMEX_INSPECTION_LOT_IMPORT_INI
    on the line:
    ELSE.
       MESSAGE e011(qmex) WITH sy-repid
                               'qmex_inspection_lot_import_ini'
                               '1'.
      > then excecute F8 to go to this break point.
    - double klick on ' l_qals-prueflos'
    on line 77 in the same function  QMEX_INSPECTION_LOT_IMPORT_INI:
    READ TABLE qave_tab INTO l_qave
                        WITH KEY prueflos = l_qals-prueflos  <      here !
                        BINARY SEARCH.
    Please check following note:
    305244 Missing operations for the inspection lot
    89541 Inspection lot exists w/o status object: EM BS001
    536769 Inspection lots without status object
    Thanks,
    Venkat

  • CONVT_NO_NUMBER dump while filling PURCHASING setup tables

    hi experts,
    I have deleted the setup tables in lbwg and try to fill the setup tables again, it is running like 6-7 secons and giving the the below dump,
    CONVT_NO_NUMBER. dont understand why it is giving the dump.
    plz provide the solution to solve the above dump,i need to fill the setup tables and extract the data into PRODUCTION SYSTEM.
    pl check the below error analysis.
    Error analysis
        An exception occurred that is explained in detail below.
        This exception cannot be caught in the context of the current statement.
        The reason for the exception is:
        The program attempted to interpret the value "P" as a number, but
        since the value contravenes the rules for correct number formats,
        this was not possible.
    Regards
    venuscm

    Hi,
    I received the same runtime error "CONVT_NO_NUMBER" after I start the application specific setup of statistical data - perform setup purchasing. The short text of the runtime error describes that "P" is not recognized as a number.
    In my case the ABAP-program "SAPLEINS" was interrupted because the function module "ME_STATISTICS_LIS_NEW" could not be processed successfully in line "341".
    So I set a break point in this line and start the perform setup for purchasing (LIS-application 02) again. The debugging mode showed me the dataset of purchasing document that was responsible for the program abort. In the table "ekbe" (History per Purchasing Document) exists one or more purchasing documents who has as transaction/event type (ekbe-vgabe) an alphabetic character. But alphabetic and numeric characters are absolutely correct for the data maintenance of transaction/event type in the purchasing document.  
    In my case the ABAP statement in line 341 (... WHERE vgabe = 1.) could not be interpreted the dataset with the alphabetic transaction/event type "P" (invoice parking).
    The sap-Note 1548467 resolved my problem and I was able to perform the setup for purchasing successfully.
    * LOOP at t_ekbe WHERE vgabe = 1.                      " 1548467
      LOOP at t_ekbe WHERE vgabe = '1'.                    " 1548467
    Best regards
    Michael

  • Why to use setup tables in LO extraction

    Hi gurus
    please send me answer

    Hi,
    Think of the SAP application tables as Production system. Now why dont we directly do reporting on these tables or why cant we use these tables instead of ODS as these already have detailed data.
    One of the major reasons is performance. If you want to load this data to BW directly with out setup tables, you cannot be sure that you have correct data in the BW system as these tables are changed by the transactions. If you still do not want to use setup tables, you should stop any changes to the tables, which is impossible (will impact the business).
    I believe this is why SAP does not allow direct access to application tables and has brought in the concept of setup tables. The setup tables hold the data for us to transfer and any changes in the data records is moved to the delta queue.
    Please correct me if I am wrong.
    Hope this helps!
    Regards,
    Maddy

  • BW Setup table filling for Billing

    Hi
    We are trying to fill the setup table for the Billing application (13).
    When we execute the Tcode OLI9BW to fill the setup table, we are prompted to fill in the Info-structure name.
    When we fill in S262 (SD - billing doc) we are receiving error - "No updating active for information structure."
    Now I have 2 queries:
    1 - When I am using LO cockpit, why is it asking me to fill in Info strucure which is an old concept of LIS.
    2 - If anyways I have to fill then what should I give in the Info-structue.
    Please suggest.

    Hi,
    First you will activate SD Billing Data sources (2LIS_13_VDITM . etc ) in LBWE and RSA5. select the your update mode in LBWE. After that delete your Application u2013 13  setup table and Initialize the setup table .
    Regards,
    Krishna.

  • Extractors/ Setup Tables  for Master Data

    Hi Experts,
    I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data.
    I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
    What does that mean.
    What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
    Kindly help me as soon as possible.
    Thanks in advance.

    Hi Priya,
    I am not sure if the extractor enhancement methods, setup table initialisation for Master Data different from transaction data. -
    For your information there is no conecpt of intialisation for master data.
    I am trying to do a delta init with initialisation of Setup table (OLI7BW) for 0CUSTOMER_ATTR. And I am not able to see any records in RSA7. Althought RSA3 shows 10 data packets and 1000 records.
    What does that mean.
    As said there will be no setup tbale concepts for masterdata, the changes for masterdata follows the delta pointer concept(i.e whenever changes to standard masterdata table happens the message class trigger the delta pointer for those changed records and post in RSA7).So always u see in RSA7 the changed records for masterdata tables
    What I want to achieve is all the records a fresh for a few master data datasources since they were refreshed last month. Since then they were not being used.
    i didn't get abt this question can u eloborate
    let me know if i answered ur queries

Maybe you are looking for