No SLD Destination error

Hi
When i am installing NW04s i am not getting the option "No SLD Destination'.Can anyone tell me the possible reason for this ?
Thanks
Monika

Monika,
Need not worry at this time if you dont see the screen.You can configure SLD once installation is done.
Thanks
Kalyan

Similar Messages

  • RFC destination error while importing a client request

    Dear Experts,
    We are trying to import a Client Export from our Prd system to Development System and we are unable to import the request as it pops up a RFC destination error.
    We have checked the RFC in the Dev QAS and PRD related to TMSADM and all of them are working fine
    FYI, We are able to release the transports from the development system and it can be moved till qas and prd . So the TMS Configuration is also good.
    The data file and co file in the backend of development is the same size as that of the Prd system.
    I am really stuck . Kindly suggest a solution . Please find the screenshots while importing
    Regards,
    Suratharajan .S

    Hi Suratha,
    Goto STMS->system overview and select the Communication tab.
    Maintained the Instance number of the ASD system.
    Once you maintained the instance number , you will able to see it in the RFC ASD.DOMAIN_ASD.
    Also distribute the configuration after entering the instance number.
    With Regards
    Ashutosh Chaturvedi

  • Option "No SLD Destination"

    Hi,
    I need some clarification according to following situation:
    On one machine (A) I have installed SAP NetWeaver, Development Subscription, with double stack engines ABAP+Java and all possible usage types. On this machine I have configured a SLD (CEN) and it is running.
    On another machine (B) I have diverse other SAP Trials (NSP, J2E, and CE1), they all are using a local SLD.
    Now I have installed successfully one further system, a developer workplace including a Java instance and the developer studio on (B). During installation - in phase: parameter settings - I decided SLD-oriented to use the option "No SLD Destination" because I read that there had been given different changes to CTS and SLD since release SAP NW 7.0 SPS13. So I do not want to mix the 'older' SAP versions SLD with the new system, because I want to activate the usage of NWDI (installed on (A) ) via the developer studio.
    Luckyly, I found the Wiki of Christian Haarmann who describes the very hard way to post-install a SLD when you have decided yourself to use the option "No SLD Destination".
    WIKI: "Walkthrough Installation of SAP NetWeaver Trial and ESS Business Packages"
    But he does the way, when all components are on the same machine...
    Would it the right way to start post-installation of SLD with his third step: running NWA_03_Creating a connection to the SLD... and to give here the connection data of my central system with the user who is known on that server (A). If so, must this user also known with my machine which I want to use for test development (B)? Reading the newest documents about SLD and looking to the messages during the installation process, I understood that the software components being installed on the development system need no local SLD.
    Before I am bollixing up my server machine I need some help and advice from you, the experts, to come clear with this situation.
    Any input is appreciated.
    Thank you in advance.
    Regards
    Christian
    Edited by: Juan Reyes on Jul 1, 2009 4:55 PM
    Edited by: Christian Rauch on Jul 2, 2009 11:43 AM
    Edited by: Christian Rauch on Jul 2, 2009 11:44 AM

    Monika,
    Need not worry at this time if you dont see the screen.You can configure SLD once installation is done.
    Thanks
    Kalyan

  • SLD import error in XI 3.0 SP 11

    Hi ,
    When I try to import software components versions in IR from SLD I am getting the following error.
    Error: Unable to read software component versions from System Landscape Directory
    Details:
    Unable to read software component versions from system
    Landscape Directory "<hostname >:50000" (SWC_IMPORT_PROCESS_EXCEPTION)
    MESSAGE ID: com.sap.aii.ibrep.server.sldaccess.interfaces.rb_SLDException.SWC_IMPORT_PROCESS_EXCEPTION
    Did any body come across this error ?
    Thanks
    Sunil

    Looks like your RFC connection is not defined properly.
    Go to SM59 transaction and open TCP/IP connections, check SAPSLDAPI RFC destination is working correct by clicking on <b>Test Connection</b>
    If it is not working correct.
    To find your gateway host & service, go to SMGW -> Go to -> Parameters -> Display and look for <b>gateway hostname</b> and <b>gateway service</b>.
    Then look for Program ID in Visual Administrator JCo Connections under services.
    If you are still confused, download install guide and look for SAPSLDAPI, the documentation is available.
    http://service.sap.com/instgudies -> Netweaver 04 -> Installation -> SAP XI -> Install Guide.
    regards
    Shravan

  • RFC Adaptive Model,JCO destinations error

    HI,
    I created the tutorial application to get Flight List using RFC adaptive model.
    I created the JCO destinations in web dynpro content administrator after configuring the SLD (after many problems though ).
    Our Server is Web AS 6.4 ABAP + JAVA ,but no R/3 modules installed.
    WD_FLIGHTLIST_MODELDATA_DEST-type application--single server connection
    WD_FLIGHTLIST_RFC_METADATA_DEST-type Dictionary-load balanced
    The JCo destinations status shows green.
    The test for WD_FLIGHTLIST_MODELDATA_DEST is succesful but the test for WD_FLIGHTLIST_RFC_METADATA_DEST fails with the error:[code]
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM  TYPE=B MSHOST=nwserver GROUP=PUBLIC R3NAME=NWS MSSERV=sapmsNWS PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       Group PUBLIC not found TIME        Thu Nov 10 18:24:23 2005 RELEASE     640 COMPONENT   LG VERSION     5 RC          -6 MODULE      lgxx.c LINE        3515 DETAIL      LgIGroup COUNTER     2 [/code]
    The ping fails and if i test it again,i get another error
    [code]com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM  TYPE=B MSHOST=nwserver GROUP=PUBLIC R3NAME=NWS MSSERV=sapmsNWS PCS=1 ERROR       Group PUBLIC not found TIME        Thu Nov 10 18:29:13 2005 RELEASE     640 COMPONENT   LG VERSION     5 RC          -6 MODULE      lgxx.c LINE        3515 DETAIL      LgIGroup COUNTER     1 [/code]
    What is wrong?Any more steps required?
    If i try to edit it,the type is still the same-Application with single connection.
    How can i change it?Do i need to change it to type Dictionary in the first place? How to proceed.
    Please guide.
    Regards,
    Siddhartha
    Message was edited by: Siddhartha Jain
    Message was edited by: Siddhartha Jain

    hi Siddhartha,
    You have to configure PUBLIC group using SMLG transaction
    check these links out
    http://help.sap.com/saphelp_nw04/helpdata/en/28/1c623c44696069e10000000a11405a/content.htm
    hope this helps you
    Regards
    Rohit

  • ESS/ MSS  JCO destination error...

    Hi All,
    I have created all JCO destinations and when i test them , the result is successful
    But once i click on ess/mss tab in portals, i get the error..
    <i>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_HumanResources_MetaData' in the SLD. No such JCO destination is defined in the SLD.</i>
    But i have maintained SAP_R3_HumanResources_MetaData in the SLD.. Actually i have two SAP_R3_HumanResources_MetaData services one is active and another is inactive..
    For SAP_R3_HumanResources -- i have used "Logon Ticket" and for SAP_R3_HumanResources_MetaData -- used userid & pwd.
    Actually i have to do UserMapping as my portal userid and R/3 userid are different.. Then in this case am i creating JCO destinations correctly.. If not how to do..
    Please throw some light into this problem by your valuable suggestions.
    Thanks & Regards,
    Mahesh.M.R

    Hi
    I am having the exact same problem (i think). I believe that the problem is caused by a failed connection to the SLD.
    In my case, if I scroll the bottom of the error page, the 'Detailed exception chain' has the error:
    TypeBroker failed to access SLD: Error while obtaining JCO connection.
    The same error can be found in the DefaultTrace.
    This ESS is on a nw2004s sandbox portal (trying to reach an ECC 6.0 sandbox), but being lazy I just reused the SLD in my Development environment.
    This is however a Java WAS 6.40 and according to Note 954820 (Compatibility of SLD in the system landscape)
    QUOTE
    In general, the connection of systems to the SLD is released for SLD client applications with releases earlier than or equal to the SLD release (to be more precise: the AS Java release on which the SLD runs). Within a release, all Support Packages are released.
    UNQUOTE
    So, i'll try activating the SLD on a nw2004s JAVA WAS and use that instead.
    Regards
    Stig

  • SLD Configuration : Error opening an RFC  Connection

    Hi All,
    I am working on EP6 SP19 and trying  to configure SLD.
    I was trying to check the data collection with the transaction RZ70,and I got the following error:
    Data collected succesfully
    Used RFC Destination: SLD_NUC
    RFC call failed: Error opening an RFC Connection
    Existing periodic jobs removed, number: 1
    Program scheduled: 20070327
    Event controlled job already exists,scheduling not necessary
    I performed the follloewing steps:
    I have imported CRContent.zip succesfully.
    I have configured the data supplier bridge with following parameters.
    Update local SLD (sld/active): TRUE
    RFC Gateway:
    Server : <host name of J2EE server>
    Service : <The SAP gateway service port> (here I gave sapgw00)
    This gateway service is installed while installing WAS Java.
    Please clarify if I can use the same or Do I need to install standalone gateway instance?
    I restarted the Data supplier bridge it is running.
    I have created RFC destinations through visual administrator with
    JCO RFC provider and used the same name for the program id
    in RFC destination of SM59
    Once the above steps are done,I am getting the error.(Error opening RFC)
    Please give me a clue of wat else do I need to do?
    Regards,
    Santhosh

    Hi,
    check the following once.
    How to configure the R/3 system as technical system into portal is follows.
    U need to add some properties in VA.
    Then only it will works.
    U can goto the VA and in SLD data supplier add some properties like this.
    1)HTTP settings: host = poratl host , port=50000 ,user = portal username , pwd=give thepwd.
    2)RFC settings : Gateway host= poratl host and Gatewayservice=sapgw00
    3)CIM client generation settings :host and port are the same as above and user and PWD same above
    After this u need to check the Cimclicnt and that shows success.
    And finally u need to go to the SLD add ur r/3 system properties and and ip address and host name in the host file of ur windows.
    and finally add message server host in the services file in ur windows.
    Have you checked the JCo destinations And SLD connetions.
    If all are correct then u can add the properties in the Application server
    Host file add the IP address and alias name
    C:\WINDOWS\system32\drivers\etc\host
    in services file add the <Messageserverhost> 3600/tcp.
    C:\WINDOWS\system32\drivers\etc\services.
    Then it might helps you.
    Thanks,
    Lohi.

  • AS-ABAP (BI) system registration in SLD RZ70 Error

    Hi guys, I'm following the SAP note 983156 - BI configuration w. Template Installer and I'm in the step in order to establish communication between my BW IDES and Portal.
    ""Checking the AS-ABAP (BI) system registration in SLD""
    the note says:
    "When configuring the Webdynpro Jco destination connectivity the AS-ABAP (BI) system must be configured in the SLD."
    Procedure:
    Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
    Please check in Home -> Technical Systems -> select type ABAP. This
    should have configuration of your ABAP (BI) system.
    If it is missing, logon to your ABAP (BI) system -> goto transaction RZ70. Fill in the SLD bridge: gateway info -> Activate -> Start data collection."
    Well, when I'm in SDL Home > Technical systems, I have nothing there, so I started to enable the SDL Bridge in RZ70 and after running it, it gives me the error:
    0: ibm_IAM_00                                : Collection of SLD data finished
    0: ibm_IAM_00                                : Data collected successfully
    0: ibm_IAM_00                                : RFC data prepared
    0: ibm_IAM_00                                : Used RFC destination: IBM_PORTAL_IAN
    0: ibm_IAM_00                                : RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
    0: ibm_IAM_00                                : Existing periodic jobs removed. Number: 1
    0: ibm_IAM_00                                : Program scheduled: 20100602 000100
    1: ibm_IAM_00                                : Event-controlled job already exists; scheduling not necessary
    I looked through other posts, I eliminated SLD_NUC and SLD_UC from JAVA Visual Administrator, but still, the error persists.
    Any ideas?

    Hi Kuatroka,
    In relation to the following error received: "JCO.Server could not find server function SET_SLD_DATA"
    1) RZ70 could not find gateway - check gateway defined in RZ70 is up and running in host and SLD home page ->Administration -> Data Supplier Bridge and SLD gateway host is reachable from ABAP system host.
    2) Be aware SLD/J2EE does not install a gateway as standard - you must either install a dedicated gateway instance using Presentation CD/DVD or you must use a local ABAP gateway (normally local ABAP stack if SLD runs on J2EE ADDIN) or ensure the definitions are correct for any other ABAP systems gateway you choose to use
    3) Check the definitions in SLD -> Administration ->Data Supplier Bridge match the definitions in RZ70 - try also FQDN. Ensure these are the same!
    4) If you are operating multiple SLD see SAP note 700127
    5) Ensure you have not manually created entries for SLD_UC and SLD_NUC in the JCO RFC provider of the visual administrator. The SLD has its own internal JCO provider so there should be no entries in that of the Engine.
    I am not sure of your SP levels, but this may also apply: if you have a gateway service on the defined host, the definitions
    match between RZ70 and SLD, the gateway is running then it could be a problem with RZ70 - implement notes 906454 and 926089 and 907729.
    I hope this information helps.
    All the best,
    Cristiano

  • Sld rfc error

    Hi All,
    We have defined SLD on solution manager 4.0 and its working fine for all systems in netweaver 2004s. But I have been trying to define automatic transfer of data for an 4.6c system in RZ70 . Here is the error log:
    Execute program: SLDGWSRV
    Execute program: SLDINSTSC
    Execute program: SLDINSTSP
    Execute program: SLDIPSERV
    Execute program: SLDMSGSRV
    Execute program: SLDRFC
    Execute program: SLDAPPL_SERV
    Execute program: SLDBCSYS
    Execute program: SLDCLIENT
    Execute program: SLDCOMPSYS
    Execute program: SLDDBSYS
    Execute program: SLDASSOC
    Collection of SLD data finished
    Data collected successfully
    RFC data prepared
    Used RFC destination: SLD_NUC
    RFC call failed: service 'sapgw01' unknown / CPI-C error CM_RESOURCE_FAILURE_NO_RETRY.
    Batch job not scheduled
    Also, in SM59 the SLD host is not reachable in rfc destination SLD_NUC..... Any thoughts on where to look for??????
    Thanks!!!!
    Antarpreet

    Hi Jayant,
    sapgw01 is available?.
    Central Application Server = Sapgw  + system number or instance number  of R/3 system.
    see this thread:
    Configure SLD
    Regards, Suresh KB

  • SLD bridge error, unable RZ70

    Hi
    I have installed WAS Java Only system, the SLD supplier is able to push the data into SLD using HTTP SLD Supplier of Visual Admin.
    But now I would like to push an ABAP system's data over, so I try to configure the Data Supplier Bridge in SLD, but hit the following error, so unable to RZ70 as well:
    Please advise.
    Thanks
    Jack
    #54 04/19/2006 22:38:37.134 [JCO.ServerThread-9] ERROR com.sap.lcr.sagent.SAPProxyServer: JCO Server exception raised: Server startup failed at Wed Apr 19 22:38:37 GMT+08:00 2006.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect_PM TPNAME=SLD_NUC, GWHOST=lpc1, GWSERV=sapgw54
    ERROR partner not reached (host 192.168.1.10, service sapgw54)
    TIME Wed Apr 19 22:38:37 2006
    RELEASE 640
    COMPONENT NI (network interface)
    VERSION 37
    RC -10
    MODULE nixxi_r.cpp
    LINE 8579
    DETAIL NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO 10061
    ERRNO TEXT WSAECONNREFUSED: Connection refused
    COUNTER 1
    Thrown:
    com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Wed Apr 19 22:38:37 GMT+08:00 2006.
    This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
    Could not start server: Connect to SAP gateway failed
    Connect_PM TPNAME=SLD_NUC, GWHOST=lpc1, GWSERV=sapgw54

    Hi JackLim
    You had better check RFC Destination by SM59,
    and JCo RFC Provider by Visual Admin .
    1:Check whether Program ID is matching.
    2:Check ABAP System is Unicode or Non-Unicode,
      and collect settings.
      ->if ABAP System is Non-Unicode System,
        Check off the Unicode Flag of JCo RFC Provider.
    regards.
    Yuki Fujioka

  • PI 7.11 Post Installation - Template initial SLD configuration ERROR

    Hi All,
    I was installed SAP PI 7.11 on Widows2003 with Max DB  and when i am trying to run the initial SLD confuguration Template we are getting error at 70% as below. An the same ii have tried in different Browsers lke IE8.0, IE6.0 and Firefox
    During the configuration Step: SAP BASIS Product and component.
    ERROR: CIM_ERR_FAILED: HTTP Response Code: 400 Bad Request.
    And i am posting the default trace log.
    "Severity","Date","Time","Message","Category","Location","Application",
    "Error","2010-12-08","16:43:45:296","Warning: validation was turned on but an org.xml.sax.ErrorHandler was not set, which is probably not what is desired.  Parser will use a default ErrorHandler to print the first 10  errors.  Please call the setErrorHandler method to fix this.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
    "Error","2010-12-08","16:43:45:296","Error: URI = 'null', Line = '2', : Document is invalid: no grammar found.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
    "Error","2010-12-08","16:43:45:296","Error: URI = 'null', Line = '2', : Document root element 'wsdl:definitions', must match DOCTYPE root 'null'.","System.err","System.err","sap.com/tclmitsamuimainframe~wd",
    "Error","2010-12-08","16:43:45:625","Unexpected exception catched and will be rethrown:","com.sap.ctc.util.pi.services.SystemLandscapeSetup","com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(String productName, String productVersionName, String vendor, String version, String[] componentNames, String componentVersion, String hostName, String systemName)","sap.com/tclmitsamuimainframe~wd",
    "","","","com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
    "","","","[EXCEPTION]","","","",
    "","","","com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:511)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:400)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.retryOnUnsupportedMediaType(WBEMHttpRequestSender.java:585)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:396)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:205)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:175)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:238)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:268)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.enumerateInstanceNamesImpl(WBEMRemoteClient.java:463)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMAbstractClient.enumerateInstanceNames(WBEMAbstractClient.java:480)","","","",
    "","","","at com.sap.sld.api.std.impl.BaseSystem.getAllInstances(BaseSystem.java:312)","","","",
    "","","","at com.sap.sld.api.std.tech.SLD_ABAPSystem.getABAPSystem(SLD_ABAPSystem.java:661)","","","",
    "","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:280)","","","",
    "","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:1479)","","","",
    "","","","at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)","","","",
    "","","","at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)","","","",
    "","","","at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)","","","",
    "","","","at java.lang.reflect.Method.invoke(Method.java:585)","","","",
    "","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:221)","","","",
    "","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceExecuter.executeService(JavaServiceExecuter.java:98)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:54)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:51)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:170)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:158)","","","",
    "","","","at java.lang.Thread.run(Thread.java:725)","","","",
    "Error","2010-12-
    "Error","2010-12-08","16:43:45:625","","com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter","com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter","sap.com/tclmitsamuimainframe~wd",
    "Error","2010-12-08","16:43:45:625","Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","sap.com/tclmitsamuimainframe~wd",
    "","","","[EXCEPTION]","","","",
    "","","","com.sap.tc.lm.ctc.cul.api.CULServiceException: Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:56)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:51)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:170)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:233)","","","",
    "","","","at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:158)","","","",
    "","","","at java.lang.Thread.run(Thread.java:725)","","","",
    "","","","Caused by: com.sap.tc.lm.ctc.provider.javaServiceProvider.exceptions.CPIServiceExecutionException: Service execution error. Invocation target error when call method maintainInstalledProduct in class com.sap.ctc.util.pi.services.SystemLandscapeSetup of component sap.com/com.sap.xi.ctc.app (error message = CIM_ERR_FAILED: HTTP response code: 400 Bad Request)","","","",
    "","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:255)","","","",
    "","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceExecuter.executeService(JavaServiceExecuter.java:98)","","","",
    "","","","at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:54)","","","",
    "","","","... 11 more","","","",
    "","","","Caused by: java.lang.reflect.InvocationTargetException","","","",
    "","","","at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)","","","",
    "","","","at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)","","","",
    "","","","at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)","","","",
    "","","","at java.lang.reflect.Method.invoke(Method.java:585)","","","",
    "","","","at com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaMethodExecuter.invoke(JavaMethodExecuter.java:221)","","","",
    "","","","... 13 more","","","",
    "","","","Caused by: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
    "","","","at com.sap.ctc.util.infra.BaseConfig.dispatchException(BaseConfig.java:242)","","","",
    "","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:361)","","","",
    "","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:1479)","","","",
    "","","","... 18 more","","","",
    "","","","Caused by: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 400 Bad Request","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:511)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:400)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.retryOnUnsupportedMediaType(WBEMHttpRequestSender.java:585)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:396)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.sendImpl(WBEMHttpRequestSender.java:206)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:205)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:175)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:238)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRequestSender.send(WBEMRequestSender.java:268)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.sendAndCast(WBEMRemoteClient.java:936)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMRemoteClient.enumerateInstanceNamesImpl(WBEMRemoteClient.java:463)","","","",
    "","","","at com.sap.sld.api.wbem.client.WBEMAbstractClient.enumerateInstanceNames(WBEMAbstractClient.java:480)","","","",
    "","","","at com.sap.sld.api.std.impl.BaseSystem.getAllInstances(BaseSystem.java:312)","","","",
    "","","","at com.sap.sld.api.std.tech.SLD_ABAPSystem.getABAPSystem(SLD_ABAPSystem.java:661)","","","",
    "","","","at com.sap.ctc.util.pi.services.SystemLandscapeSetup.maintainInstalledProduct(SystemLandscapeSetup.java:280)","","","",
    "","","","... 19 more","","","",
    "Error","2010-12-08","16:43:45:625","","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault","sap.com/tclmitsamuimainframe~wd",
    Thanks & Regards,
    Sreekanth

    we have installed PI7.11 agian
    thanks

  • Open Hub Destination error

    Hi,
    I am working on Open Hub (first time ofcourse). And performing following steps:-
    Modeling>Open Hub> InfoArea> Create Open Hub Destination> Output to File .csv. field names>DIrectory> activate> Create transformation> activate Transformations>Create DTP..Here I am getting an error that destination Open Hub is not active.
    Can anyone please tell me am i missing any step here?
    Thanks

    Hi...
    Always bear in mind that the OHD, once created, should be saved and activated, before creating any transformations or DTPs for it.
    And each time the OHD is changed, all the objects corresponding to it... (The transformations and the DTPs) should be activated.
    Hope this helps.
    Thanks
    Sree Ramya Lanka

  • Webi scheduling to destinations error

    Hi,
    I'm trying to schedule a Webi report to export to a shared folder. I'm using BOXIr2 SP4 in a Windows environment.
    We schedule a lot of Crystal reports to destinations and in order to do this each time we need a new destination we get our Securities Access Team to give our BOXI account access to the relevant folder.
    This is the first time we have tried to export a Webi report and we keep getting the error 'destination file error. CrystalEnterprise.DiskUnmanaged: Access is denied', even when we try to export to a folder we know the Crystal reports are successfully exporting to.
    What extra access do Webi reports need in order to be successfully exported to a folder? The 'unmanaged disk' destination is enabled for our webi jobservers and I have the correct rights to schedule to destinations from the BOXI folder of reports.
    thanks
    Keith

    Have found the answer - the webi job server was running under the local system account not the proper network account that the crystal job server was running under.

  • Third Party (Garnishment) checks - RFC destination error

    We have an issue with our testing of Third Party Garnishment checks.  We have a split system, with our HCM system residing separately from the remaining ECC modules.
    We are getting an error in regards to the printing of the checks in A/P.
    The posting is working fine
    the vendor account is cleared
    However, It’s not creating a check # or check form.
    We can do other check runs in this client fine; it’s just the 3PR runs that cause the error.
    The text of the error message is as follows:  An RFC destination could not be specified for the logical system HPQCLNT210.
       We have exhausted our resources here looking into the RFC connection and the partner profile and we cannot find anything wrong with them.
    Can someone offer suggestions on what else we could check?  Thanks so much.

    Hi David,
    Did you check below is set-up correctly.
    - Use transaction SM59 to create an RFC destinations for the remote system.
    - Use transaction BD54 to create the logical system.
    - Use transaction BD97 to link the RFC destination created in SM59 with the logical system created in BD54.
    Also, check entries in TBLSYSDEST is  filled with correct system name HPQCLNT210. Generally this error occurs when system name is incorrect in TBLSYSDEST.
    Thanks,
    Ameet

  • RFC destination error in posting 3rd party payment in 4.7 FI system

    Hi,
    We are running in to a problem when we are processing a payment via transaction F110S in our R/3 4.7 system for Financials. We are integrating our Financial system with ECC6.0 for HCM. We receive 3rd party invoice from HCM successfully via ALE and post it in 4.7 system. When we try to process payment against this invoice, apparently 4.7 system is trying to communicate with ECC 6.0 system and issuing an error and the payment processing gets cancelled. It generates a clearing document with out a check.
    The error says "An RFC destination could not be specified for the logical system HD1CLNT014
        Message no. B1550
    Diagnosis
        An RFC destination should be specified for the logical system
        HD1CLNT014. This could not be done in this case. HD1CLNT014 is not your
        local logical system and this system is not included in the relevant
        Customizing tables.
    Procedure
        Check:
            -   RFC destination
               -Port definition
             -oubound partner profile of message type SYNCH for this logical system
    We checked our configuration for all Logical system and RFC destination and everything seems fine.
    Any help in this regard is appreciated.
    Thanks
    Kesav

    Hi David,
    Did you check below is set-up correctly.
    - Use transaction SM59 to create an RFC destinations for the remote system.
    - Use transaction BD54 to create the logical system.
    - Use transaction BD97 to link the RFC destination created in SM59 with the logical system created in BD54.
    Also, check entries in TBLSYSDEST is  filled with correct system name HPQCLNT210. Generally this error occurs when system name is incorrect in TBLSYSDEST.
    Thanks,
    Ameet

Maybe you are looking for