No Sound From iPhone w/o headphones?

I cannot hear anything from the iPhone unless I use the headphones. So when I make a call without them, I hear nothing. The other person can hear me, but I cannot hear them. When I play the iPod I can only hear anything if I use the headphones. Remove the headphones and nothing. What could be wrong?

The release mechanism when removing the earbuds may be partially stuck/not fully released. This can occur if there is any foreign material in the earbuds port - lint, dirt, etc., and it doesn't take much.
Try inserting and removing the earbuds several times in a row.

Similar Messages

  • HT1430 no sound from iphone 4 oheadphones are connected can i hear music nly if or some one talking to me

    no sound from iphone only if headphones are connected can i hear music or some one speaking to me

    Thanks, but I should have clarified:  I already have USB syncing set up with iTunes on my Mac and have been adding music to my iPhone for years that way; now with the latest IOS, it no longer appears to be working.  I follow the exact steps I always have (and which are outlined in the link provided), but no actual music is downloaded to my phone- if I am not connected to a wi-fi network, I cannot listen to my music unless I download it from iCloud.  (And downloading it from iCloud is a laborious task because I have many songs.)

  • No sound from iPhone 5 headphone port stopped working

    No sound from iPhone 5 headphone port stopped working

    Try a restart.
    If no effect, then try a reset.
    If no effect, then try a restore from backup.
    If no effect, then try a restore as new.
    If no effect, likely a hardware issue, and you should schedule an appointment at a local Apple store.

  • No sound from audio speaker or headphone jack

    Hello all i bought a HP Probook 4535s from a friend and im not getting any sound from the speakers or headphone jacks. I have flashed the BIOS to the F.41 and this didin't fix the problem. I also deactivated speakers in the BIO settings and re enabled them and this still didn't fix the job. I also replaced the speakers themselfs. Any ideas would be appriciated Thanks

    Hi @cblake118 ,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
    http://h30499.www3.hp.com/hpeb/
    I work for HP

  • Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly. I followed all the advice from the Apple community

    Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly , without using "Actualización de software". I followed all the advice from the Apple community.  Can I use bluetooth speakers to solve this problem?  My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.

    You may need to reset PRAM/NVRAM.
    First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
    is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
    If all else fails try a PRAM reset:
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    DO NOT HOLD These keys beyond the second startup sound!
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

  • HT1863 No sound from Iphone 5

    no sound from iphone 5. went throough all the processes that i can think of and still no sound can only hear when i plug in my headphones

    Hello yrxm035
    I would check out the article to check against the steps that you have done. If you are still cannot get it resolved, there is a link in the article for additional support.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Are the sounds from iPhone suppose to be on iTunes?

    are the sounds from iPhone suppose to be on iTunes on my playlist in my phone and computer?

    I have the 4 and 5S and other than the finger print reader there's really not much difference in ease of use. In my opinion the finger print reader makes the phone easier, or perhaps I should say nicer to use if you use the passcode lock. Both phones have the same OS version and operate the same way albeit the 5S is faster and smoother. You also get a bit of software eye candy with the 5S thats not on the 4. The camera on the 5S is significantly better than the 4 which I thought was quite good considering its a phone. Or is it a camera with a phone? No matter, there are other small differences but I think you'll appreciate what the 5S has to offer.

  • When I plug my headphones in the my laptop I still have sound from my speakers and headphones

    Hello, I'm having trouble with the sound on
    my laptop and it's only just started to happen.
    When I plug my headphones in the my laptop my speakers don't get muted, So I
    have sound from my speakers and headphones at the same time.
    I've reinstalled the drivers and this didn't work, So I'll hoping you can help me.
    HP Pavilion g6 Notebook PC, Product number A8M62EA Windows 7 64-bit

    Here's the trick (and it's been verified on 3 other Win 7 systems):
    1) R click on your speaker icon, select 'Recording Devices' (if you have the sounds dialog up, it's the 2nd tab 'Recording')
    2) R click in the white space, be sure that BOTH "show disabled devices" AND "show disconnected devices" are checked.
    3) **Now this step is going to take a little bit of thought for each computer being used: on my laptop (HP Elitebook) I get a device "Stereo Mix", ENABLE this device.
    4) Click on Properties, go to the tab 'Listen'
    5) Check the box "Listen to this device", also change the drop-down box below "Playback through this device" to be your second audio device
    -- To verify that you've done this correctly, go back to the Sound dialog tab Playback, you should now see both of your audio devices showing the little green graphs moving.
    Here are the specific settings that I have on my laptop, maybe this will help with your settings:
    Speakers- GN9350 (Default Communications Device)
    Speakers- SoundMAX Integrated Digital HD Audio (Default Device)
    Stereo Mix- 'Listen' feature points this  device to my GN9350 headset.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Buzzing sound from iPhone 4S headphone port

    Is it normal for my iPhone 4S to make a buzzing sound from the headphone port even though the phone is in standby and when it's on?  Should I go to the apple store and exchange it?
    Thanks

    Hello shludington,
    Thanks for contributing to the Apple Support Communities.
    If you are hearing unexpected sounds from your headphones when they are plugged in to your iPhone, try these troubleshooting steps first:
    You can fix most headset issues with a few steps. Try these first:
    Unplug the headset and clear any debris from the headset jack. Then plug it back in.
    Make sure the headset is plugged in all the way. If you’re using a case, remove it to make sure it’s not getting in the way.
    Check the headset cable, connector, remote, and earbuds for damage. Make sure they’re not blocked or dirty.
    Try using another headset. If the issue happens with the other headset, contact Apple Support for help. If the other headset works, contact the headset manufacturer.
    Try using a different iOS device with your headset. If the issue happens with the other iOS device, contact the headset manufacturer. For Apple headsets, contact Apple support.
    From:
    If your headset isn't working - Apple Support
    All the best,
    Jeremy

  • No sound from internal speakers when headphones NOT inserted

    iphone thinks headphone connected when they are not.  can't get sound from internal speakers

    Does this help? http://www.apple.com/support/iphone/assistant/phone/

  • New event with no sound from iPhone

    When I set a new event with an alert from iPhone, on iCal of my iMac (synched via Mobile Me) I always got as alert a "message with no sound". How can I get an alert with sound (on my iMac) when I set a new event from the iPhone?

    First of all check the volume buttons....if they are fine
    Try and do the basic operations...
    - reboot - reset
    - if it is still not working then once try restoring it through itunes....it should solve most of the problems...
    - if it still exists then it must be a hardware issue...if u r under the warranty period then apple will replace it for sure....
    hope this helps you...
    if u need anything else then please reply...happy to help....

  • No sound from internal speakers or headphones when using ART Tube interface

    Hi - can anyone help with this...
    I have no sound fromthe internal speakers or headphones when using my new ART Tube USB interface - I get a nice loud recording level from the ART but cant monitor - in Logic 7.2
    Audio hardware interface in logic 7.2 is set to USB Codec - just like the ART manual states
    And the SOUND control panel is set to speakers/headphones
    But no love...
    Any comments welcomed
    Si2

    By default, OSX will only let you have one interface active at any one time - so if you specify the ART as your interface to get sound in, you don't have access to your regular interface to listen to it.
    But there is a workaround - open the Audio/MIDI Setup utility, create a new "Aggregate Device", and add both your required audio interfaces to it.
    Now, back in Logic, select the aggregate device you created as the audio device, and now all your inputs and outputs from both interfaces are available - the aggregate device acts as one big interface containing both your hardware interfaces.

  • No sound from internal speakers or headphone jack

    HP 15 notebook PC
    windows 8.1 64-bit
    not getting any sound from internal speakers at all. no sound from headphone jack. was working fine yesterday. updates to drivers are good. i can see sound signal in the speaker bar. please help.

    Hi,
    Can you post back with the full Model No. and Product No. of your Hp 15 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP laptops diverting sounds from external speakers when headphones connected

    Hi there,
    The problem is reproduced in several cases, but the most annoying is the following:
    1. Headphones are connected to the laptop (I assume all sounds must go to the headphones, not to the speaker)
    2. Have skype (or googletalk or several other apps) run in background
    3. Have browser (chrome, firefox) open and youtube video is being showed
    4. Message comes to IM (skype, gtalk...) and when BEEP from the application is played - it is played not in headphones, but in external speakers!
    I though the issue was with skype - but after some time I faced with the same problem in other apps - and it is not reproduced on other laptops (not HP).
    The problem is being seen on several different HP laptops. Here is details of my laptop:
    HP ProBook 6550b WD700EA#ACB
    Windows7 Enterprise 64bit, SP1

    Ok I have it Fixed on my computer.
    In the control panel then sound there are 3 devices.
    AMD HDMI Output
    AMD High Definition Audio Device
    Speakers and Headphones
    IDT High Definition Audio CODEC
    Communications Headphones
    IDT High Definition Audio CODEC
    What apears to happen is that as soon as a communications type program starts it devides the audio inbetween 2 mixers and seperated the headphone jack from the main audio card. As soon as I right clicked and disabled the "Communications Headphones" Then there is only one mixer that focres all applications to use the heaphone jack instead of the regular applications through the external speakers and communication applications to the headphone.
    If for any reason you want to reactivate the "Communications Headphones" one you disable you will need to right click in the sound windows and select show disabled devices.

  • No sound from internal speakers or headphones

    Hi
    Today I bought a new mac book pro (retina display model) and I have had a weird problem -
    There is no sound from either the internal speakers or when i plug headphones in.
    I can change the volume levels, the sound preferences panel shows the internal speakers
    and when I plug headphones in, it also shows them listed. The mute box is not checked.
    I ran garrage band and it also allows me to choose the internal speakers as an output source.
    Everything the computer is telling me seems like it can use the speakers and headphone socket BUT
    there is never actually any sound???
    If it was a hardware fault, surely the computer wouldnt be able to detect the internal speakers or know when the headphones are plugged in.
    So im assuming its a software issue?  I tried using the usb port next to the headphones socket and that worked fine (usb mouse) so the whole board
    isnt broken there.
    Any ideas?

    Just bought it?
    You can return any Apple product within 14 days of purchase.
    You have 90 days of free tech support Apple from the date of purchase.
    1-800-275 2273
    Best.

Maybe you are looking for