No sound from my I pad on videos

I do not have sound on videos played on my I pad, have been in General Settings and have checked there! any help welcome

http://support.apple.com/kb/TS1630?viewlocale=en_US

Similar Messages

Imac 27 no sound from graphics thru Safari, then video just stops

Anyone else seeing video or sound issues from Safari after upgrade??
Thanks!

Update.... GoPros site works... so I am guessing it is a flash or plug in compatibility issue?? maybe?

How do you sync sound from a digital recorder with video?

Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.

When you're shooting use the ciak , then when in imovie, sync the sound of ciak with the closing of it and you're done
If u havent's used , just seek for a sound or a part of speech witch is very evident to sing
Do it before cut video
hope helps
J

I can not hear any sound from my i pad

there is no sound while I use my ipad

I had the same problem with my iPad.I sent it to a service provider who changed the speaker.Still the problem persited.This is what I did and the sound came back:
1)start playing music from the iPad.You will notice that there is NO SOUND.
2)keep the music playing WITHOUT the sound.
3)connect your earphones and you will hear the music on the earphones!
4)whilst the music is playing,swipe up and reveal the menu at botton of page.
scroll to far left of the bottom menu.
5)You will notice that the speaker button on the left has a line across it indicating that the main speaker is disabled.Tap the icon to remove the line across the speaker icon.
6)While the music is still playing ,remove the earphone jack and the music will continue to play on the iPad speakers.It looks like the iPad speaker is disabled whenever the earphone jack is inserted.It is supposed to re-connect when the earphone jack is removed but for some reason it remains disabled!
All the above assumes that you have done all the other issues of making sure that your volume buttons have not been muted on the external switch.
Good bye.
Sala kuhle.
Shalom.
שלום.

No sound from GB over Bluetooth connection

The function to perform sound of Garageband over Bluetooth doesn't work well!
The I-pad settings to play sound over BT are correct.
The pairing with my (bluetooth) VOIIS gateway was succesful.
Music (sound) from my I-Pad (i.e. Music APP) is transmitted correct to my amplifier through this device.
The special setting in Garageband have been done ( sound over Bluetoorth/HDMI)
however the sound of Garageband over Bluetooth is not transmitted to my BT device.
Without Bluetooth setting it is working well (sound from I-pad speakers (i should say squeeckers ))

The problem is solved!
I did what you suggest a couple of times, but i had no luck.
What might have somehow fixed the problem: I opened iWeb, and then previewed a GB song to import. It played great.
Then I opened GB and everything worked...
Strange.
Thank you all for your help anyway!

No sound from headphone or internal speaker

I have an iPad 4th gen, there is no sound from the internal speaker, nor from the headphone jack. I've swapped all parts in the ipad and another motherboard works, but this one is obviously stuck in some mode I can't really explain. When I volume up or down while on the home screen, it shows volume up and down fine, but I think it should show ringer up and down. I plugged in headphones, and unplugged them, and it gets stuck thinking headphones are plugged in, but there is no sound from the headphones. Youtube videos do not play, they appear to start playing but they ultimately just sit there and never play. Itunes store sample music does not play either. I click on the song I want to play a sample of and the play/pause effect of the sample graphic flashes and nothing happens, like I never hit play. I've tried airplay to my apple tv, and when I select apple tv from the bottom swipe up menu, it goes right back to the ipad, it will not try to air play. This is a very strange situation and I'd like any help I can get. I've reset all settings, upgraded ios to the latest, cleaned out the headphone port, swapped the main headphone/camera/mic/volume button cables with working ones, I've changed the internal speaker with a working speaker...I'm stuck.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

Hey ErikSimon, I kept troubleshooting my problem last night and when I loaded my samples an alternate way, actually the longer way, it worked. I think I have gremlins in the system or something, but I got it working again. I was having the issue when I tried loading the samples via these instructions that were mentioned in SFLogicninja's Youtube video @ 3:07
http://www.youtube.com/user/SFLogicNinja#p/u/8/7YjgKLZ2jpY
They are good instructions, but the Logic gods weren't smiling on me last night. Really weird and frustrating at the same time. Thanks anyways.

No sound on YouTube videos, but sound from NetFlix...

So I use Google Chrome and have never had a problem with sound. Been away for a week and been using NetFlix the past couple of days and no problems with sound. Went to go on YouTube and no sound coming through. Refreshed the page, checked my speak connection,
the video wasn't on mute... V confused and would like to fix it. Any suggestions?

Try to reset Internet Explorer settings.
http://support.microsoft.com/kb/923737/en-us
Here is another solution that
you can try.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/no-sound-from-internet-explorer-sound-from-media/0a93e2b8-dd41-46c9-9173-80eeb1e3b308

Occasional sharp 'beep' sound when transition from a photo to a video

Hi guys-
I've been looking everywhere trying to solve this without any luck (doesnt seems like many out there with such problem).
I'm compiling a video for a family event (comprising of still photos and video clips) but i noticed that occasionally when the compilation play from a still to a video clip- it'll emit a sharp 'beep' noise.
This is what i checked and confirm so far-
1. it happens only when moving from a photo to a video (but not always occur).
2. the video clip has original sound volume set to 0.
3. original video clip does not contain the beep.
4. background song does not contain the beep.
5. not all transition from photo following video produce such beep.
6. the beep still happens even with the background song removed (technically no voice element in the project).
Can anyone share any ideas/experience around this?
Thanks in advance!
- Ryan

Does this happen just when playing in iMovie, or after you've rendered the video into a finalized stand-alone file? If you haven't exported the movie yet, I'd try that and see if the beep is still there.

How can I import video and sound from my sony camcorder?

I have just bought the mac. I'm struggling to import video AND sound from my Sony DCR-SR87 hard disk handycam camcorder. From what I've read already, I ended up purchasing and downloading Quicktime MPEG2, and used the Utility MPEG Component Lion from downloaded MPEG Streaming 1.9.3b6 to enable video and sound to play on the computer directly from the camcorder. The problem is that when I import these clips using iphoto (it pops up when I connect the camcorder), the sound does not accompany the video onto the computer. I've hit something of a brick wall and would really appreciate any help.

OK, according to
http://support.apple.com/kb/ht3290
your camera is supported by iMovie 9. Perhaps the question is better asked in the iMovie forum. Would you like me to ask a moderator to move the thread?

Can I stream the sound from a video running on my apple tv to my wireless speakers using airplay?

I have living room speakers connected to an airport express and available via airplay from my computer, ipad2 and iphone which is great for playing music. My question is, can I use those speakers to play sound from videos running on my apple tv? For instance if I use airplay to run a video on apple tv from my computer or iOS device, can I have the audio play on my speakers connected to an airport express? It would be amazing to be able to use the speakers simultaneously with the apple tv as they are both on the same home sharing network. Possible?

No. But, are your speakers only connected to the AE or are they also connected to an amplifier?
You would need to use a Toslink cable to go from the Apple TV to the speakers/amp.
I don't use this or know a lot about it, but it is wildly popular, inexpensive and may be of help:
http://www.rogueamoeba.com/airfoil/
Message was edited by: bobbyco57 to add Airfoil info.

Webcam Video pauses when recording sound from microphone

I have a strange problem which i am encountering when recording and playing back webcam video.
I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
I am using AS 3.0, FMS 3.5 and flash CS 5.5
When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
I tried using the flvplayback component and even their it pauses.
Any help is appreciated.

Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

When i play a video or movie i get a buzzing sound from the speakers. how do i solve this problem?

I get this buzzing sound from my speakers when I play a video, or movie either from the internet or playing a DVD. What can I do to solve this problem

A: There is no such thing as an unlocked iPhone 3Gs in the United States. ALL iPhone 3Gs's sold in the US are locked to AT&T. AT&T will NOT unlock iPhones, therefore it is not legitimately unlocked.
B: Sprint is a CDMA network as others have mentioned. They do NOT use SIM cards. The iPhone 3Gs will NEVER work on Sprint. Ever. It's not physically possible.
Either your Uncle misunderstood or he was mislead. Send it back and tell him to get his money back. Buy an iPhone in India from a supported carrier.

When I closde a page where there has been a video, ie youtube or the like, the sound from that video that had played will continuw to run. I can close Firefox and upload it again and still will the sound of the video continuew to run. WHY?

When I close a youtube video or some other video and even after closing the tab the sound from the video continue to be played. As a matter of fact I have even closed Firefox and re-started Firefox and it plays again. I even went and turned off the computer and re-started the computer and then Firexox and the video sound was still there playing. WHY is this happening???.

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

When I select a sound email or video, decide I want to go to another video or email, the sound from the first video continues to completion before I can listen to my new selection. How can I stop this?

How do I stop the sound from a video or email when I want I click out of the video. Presently, the sound continues and I have to escape out to home screen to stop it.

Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps.

No sound from my I pad on videos

Similar Messages

Maybe you are looking for