No sound on Intel HD Audio (3400 series 5)

$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
$ lsmod | grep '^snd_' | column -t
snd_pcm_oss 38914 0
snd_mixer_oss 15315 1 snd_pcm_oss
snd_hda_codec_hdmi 22784 1
snd_hda_codec_conexant 42084 1
snd_hda_intel 22186 0
snd_hda_codec 77703 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6342 1 snd_hda_codec
snd_pcm 73736 4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 19488 1 snd_pcm
snd_page_alloc 7161 2 snd_hda_intel,snd_pcm
alsaconf complains that no "No supported PnP or PCI card found"
This is a shiny new Lenovo X201 total lack of sound is completely killing the Arch experience. Any pointers/advice is very appreciated
regards
srp

lostone wrote:I cant seem to find the one for hp pavilion dv7 1183cl
It's not important, I've never found nowhere stated that dell M2400 uses dell-m4-2 but I've tried and it worked...
Start with option snd_hda_intel model=hp-bpc-d7000 and reboot your computer. If it doesn't work, try with some other option from the list bellow... Good luck!
ALC262
47 ======
48    fujitsu Fujitsu Laptop
49    hp-bpc HP xw4400/6400/8400/9400 laptops
50    hp-bpc-d7000 HP BPC D7000
51    hp-tc-t5735 HP Thin Client T5735
52    hp-rp5700 HP RP5700
53    benq Benq ED8
54    benq-t31 Benq T31
55    hippo Hippo (ATI) with jack detection, Sony UX-90s
56    hippo_1 Hippo (Benq) with jack detection
57    sony-assamd Sony ASSAMD
58    toshiba-s06 Toshiba S06
59    toshiba-rx1 Toshiba RX1
60    tyan Tyan Thunder n6650W (S2915-E)
61    ultra Samsung Q1 Ultra Vista model
62    lenovo-3000 Lenovo 3000 y410
63    nec NEC Versa S9100
64    basic fixed pin assignment w/o SPDIF
65    auto auto-config reading BIOS (default)

Similar Messages

No sound with Intel HD audio [solved]

Hi,
I recently set up my laptop with archlinux, and I'm getting no sound. I have the drivers for my chip installed, there is nothing unusual in dmesg, and alsamixer detects the card fine, but even after I unmute the card, I get nothing. when I start up kde, I get this message:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such file or directory)
The sound server will continue, using the null output device.
It may be as simple as making /dev/dsp a symbolic link to the correct device, but I'm not sure which device that would be.
alsamixer tells me:
Card: HDA Intel
Chip:SigmaTel STAC9221 A1
Thanks in advance.
Last edited by Zerathidune (2007-03-10 03:35:45)

do you belong to the audio group?
as root
"gpasswd -a USER audio"
as user at konsole type
"alsamixer"
anything come up ?
awhile back i had an issue with line jack sense i forget weather on/off

Intel HD Audio vs Sound Blaster Extigy

I am wondering what is a better soundcard.
The built in Intel HD Audio soundcard or the Sound Blaster Extigy USB?
I am outputting to a Logitec Z5400 via the optical output of the extigy and the input of the Z5400.
Any help is greatly appreciated.
Thanks!

I have to agree but I doubt most people notice. Not a lot a audiophiles anymore. Intel HD specs are typical of a low costs digital to analog converter. You won't find many laptops that spend a lot on sound quality. Although their are a couple PC's that have certified sound with better sound cards. I would think your Macbook like mine has a optical digital connection through the audio jack. If you really want better D/A conversion you could buy a external D/A converter and connect through the optical output. Personally I use a pair of SkullCandy Hesh 2's and find the sound very good. I certainly have heard worse. At least S/N ratio is pretty good. Some laptops I have had in the past really had some nasty background hiss.

T520i Sound problem (real-time audio)

I`m using my Lenovo T520i i7-2630QM with 8GB Ram for my DJ needs.But i have pops, hisses, crackles and pauses. I disabled the wireless adapter in order to get better results and it`s working but in every 15 min or 30min there is crackles and pops.I`ve run the LatencyMon http://imageshack.us/f/861/212324333434344.jpg/. the highest dpc routin execution is iaStor.sys. any ideas ?

Hi vlad5657
Try updating to the latest Intel Chipset driver using System Update.
You could also try downgrade to HP's Intel LAN driver. (High % causes from this)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=de&cc=de&prodTypeId=32...
&swLang=18&mode=2&taskId=135&swItem=ob-96025-1
Related issues:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/DPC-latency-audio-mouse-skip-and-stutter-on...
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Workaround-for-high-DPC-issues-for-X-T-and-W-0...
You could find more on similar cases on this forums.
By the way, since you are a DJ, you could achieve better sound / customization through Dolby audio drivers instead of using default Conexant audio drivers.
Hopefully, 2012 would be a better year for all of you!
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

Intel HD Audio Jack Detection

I have recently got a new computer case with Intel HD Audio so I can plug my headphones in, and not have the sound playing in the back, but I'm having a issue with ALSA cancelling the back audio, not sure if there is a easy fix or not...
Motherboard model is a GIGABYTE EP45T-UD3LR... Intel P45 chipset. Audio Card is a Realtek ALC888 Chipset
All the fixes I have looked at have seemed like to me like they are specific to a laptop, not a general fix.
It's not really that big of a issue if it doesn't work, but it would be nice if I can get it to work.
Any suggestions?
Last edited by themattbeballin (2010-12-26 06:10:05)

I have to agree but I doubt most people notice. Not a lot a audiophiles anymore. Intel HD specs are typical of a low costs digital to analog converter. You won't find many laptops that spend a lot on sound quality. Although their are a couple PC's that have certified sound with better sound cards. I would think your Macbook like mine has a optical digital connection through the audio jack. If you really want better D/A conversion you could buy a external D/A converter and connect through the optical output. Personally I use a pair of SkullCandy Hesh 2's and find the sound very good. I certainly have heard worse. At least S/N ratio is pretty good. Some laptops I have had in the past really had some nasty background hiss.

HP PRO 3400 Series desktop won't boot CPU fan starts and stops , no video, no beeps

I have the above computer with an i3-2125 CPU, Windows 7 Home Premium 64 bit, and a 300GB Seagate Hard drive. I've had it for about 2 years and been working fine. It started acting up about 2 months ago. It would lose the date and time. I checked the battery, and it was OK, so I kept using the computer. Then on 9/15/2014 it hung on "Starting Windows", I did the following:
1. Ran the built in HP diagnostic on hard drive and memory and they both passed.
2. Tried to go to last known good configuration and nothing happened.
3. Noticed the date and time were off, replaced the battery, nothing changed.
4. Tried another hard drive from another HP PRO 3400 Series and it would boot up but could not set date in bios.
5. Tried all kinds of things but could not set date in bios.
      a. Bios date read 48/00/0048 after removing and replacing battery.
      b, Tried to reset date to 9/16/2914 and it gets 56/00/0051
6. Then it wouldn't boot at all.   So now when you turn on the power, the CPU fan starts and runs for about 1 second, then shuts off for 4 seconds, then starts and runs for another 1 sec and it does this continuously. There is  no video and no beeps and no difference when all memory is removed.
7. I removed the power supply, and checked voltages. It appears to be OK.
8. I removed the motherboard, and inspected it- saw nothing obvious.
9. I connected the power supply to the motherboard with nothing else connected to the motherboard, and I get the same thing. CPU fan starts then stops continuously, no video no beeps.
10. I am thinking it is the Motherboard, but I sure could use some suggestions as to what to do next.
Thanks
Maxgle from CA

Maxgle, welcome to the forum.
I believe that you would get more responses to your problem if you start a thread here. They are the members who know your computer best.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Added sound card, no onboard audio no more

i added an sb live value for the use of the joystick port only, not wanting to use ti as a sound card. the onboard audio of my 865pe neo2 fis2r msi 6728 no longer works. so how can i get back my onboard audio? my speakers are still plugged into the onboard. is this even posible? to use onboard audio, but use my joystick on the sb live card when playing games? or is it only one or the other? do i need to go into the bios maybe and tell it to use onboard audio? like maybe it changed cus of the new sb live value card?
ok, i hooked up my speakers to the sb live card, it's fine i guess , but is it possible to use onboard audio with joystick port only from the live card? or because i have a sound card installed now, does that totally disable onboard completely unless i removed the live card?

Yep No is the Answer, Because as soon as Windows Sees that you have a PCI sound card, it will not allow the Onboard sound chips Drivers to Load upon Bootup, I cant believe that you went through the Trouble of Installing a Sound Card that has a "MIDI" port, Instead of just Getting a USB Joystick , as the New USB Joysticks are Much more Responsive and Support Many More Games, and You can Get one For Less $ then you Paid for the Soundblaster .....Sean REILLY875

Can't get sound to play using audio line in

I am trying to play audio from my iPhone by connecting mini plug cable to the headphone jack and the audio line-in mini plug. The input level indicator in System Preferences > Sound is showing that audio is playing but I don't hear sound. I do have sound playing through my Mac Pro with iTunes, steaming audio/video, etc., so I know it works. Any ideas how I can get sound to play audibly using line-in?

Another option not involving any additional software - see:
http://www.insanelymac.com/forum/topic/87046-play-line-in-through-macbook-pro-in ternal-speakers/
Just came across this problem myself (10.8) and that solution works great - just open Quicktime, there under File: choose a "new audio recording". In the upcoming controller switch up the volume.
Weard that it works this way but nowhere else in the sound System Control panels ...

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails. What is wrong with it?

My iphone 4 speakers stopped giving me sounds when i play audio or video even while gaming. It works fine when ringing tunes of for voice mails, even works fine with headsets. What is wrong with it?

well i'd seriosly say point a hot hair drier at the speakers as water has entered the phone most commonly via the home button but avoid getting it too hot let it cool every 3 minutes after constant drying. Don't worry I have honestly dont this with my iPhone 4 GSM 16GB. For future reference avoid letting it get wet.

Is MAC Pro (late 2013) compatible with Intel E5 or E7 Series 10 core CPU

Is MAC Pro (late 2013) compatible with Intel E5 or E7 series 10 core CPU?

http://macperformanceguide.com/MacPro2013-CPU-upgrade.html
Someone did some testing and these Xeon processors scale differently, turbo-boost means it can put a core to sleep when it isn't needed and give more to the cores that are.
But, the number of apps that do use more than 8-core are in short supply.
Then there is the contention between cooling and whether the cpu or the twin GPUs get preference, OS X won't allow both to ask for full 100%.
We assume you know all there is about cpu scaling and usage and just need to see which ones are on Intel's list that are pin compatible and have the right thermal requirements and such.
Fall is always IDF and v3 of the E5
https://software.intel.com/en-us/forums/topic/531053
http://ark.intel.com/products/series/81065/Intel-Xeon-Processor-E5-2600-v3-Produ ct-Family#@All

After 1.6.2 update, I have hd picture but no sound, tv says hdmi audio unavailable

I have hd picture but no sound, tv says hdmi audio unavailable , this happened right after update 1.6.2 my television is an HP PL4260N, I saw on other post in fixya.com other people with same problem after update too. Any ideas on fixing this? I already spent 2hrs with tech support trying to fix this and no luck, they had me use components I never had any problems before this update, is there a way to go back to 1.6.1? One more thing my standard channels work fine (video & audio)

You may need to revert to using component cables until they hammer out the issues with HDMI. Just hang on to that HDMI cable for future use when these issues are resolved. You will not see a degrade in picture quality with component cables. Only downside is the added cabling mess.

Tell me the driver for audio for series c500 and model c505tu

Tell me the driver for audio for series c500 and model c505tu

Hi: I already gave you the driver above for the PCI simple comms controller. Here is the driver you need for the wireless card... This package contains the Broadcom Wireless LAN Drivers that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebook models that are running a supported operating system. File name: sp48591.exe You will also need this bluetooth driver for that model wireless card... This package contains software and a driver to support the Broadcom 2070 Bluetooth for supported notebook models that are running a supported operating system. The Broadcom 2070 Bluetooth Driver works together with the Broadcom WLAN Driver that supports the NIC in your notebook to enable Bluetooth connections. This package also provides additional Bluetooth Profiles. File name: sp50180.exe

No sound on Intel HD Audio (3400 series 5)

Similar Messages

Maybe you are looking for