No system load data available

Dear Experts,
When i am executing Tcode ST03 it is showing that "No system load data available". i have click on help button, it is giving
-->
It is possible that the workload collector is not schedule. To schedule the collector, choose, in Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.
<--
I am scheduling RSSTAT83 program, it is going to cancelling and it is givign the dump. In dump i am getting follwong text. what could be the reason please help me in this regard.
-->
What happened?
Error in the SAP kernel.
The current ABAP "RSSTAT83" program had to be terminated because the
ABAP processor detected an internal system error.
<--
-->
Error analysis
When executing SUBMIT on the program "RSSTAT83", the internal table
SSCR should be filled, but this table was not found.
<--
When i am trying to executing "RSSTAT83" program in se38 it is giving same dump again

N,
SAP_COLLECTOR_FOR_PERFMONITOR is not a transaction, it is a standard background job supplied by SAP.
Being a beginniner does not mean you need to ask for help in a forum. Your first step should Always be to do Basic research, such as in SAP online Help, or in the forum itself. Only after exhausting your basic searches should you raise a question here.
For more info on monitoring performance, start with SAP help
http://help.sap.com/saphelp_gateway20/helpdata/en/c4/3a6bff505211d189550000e829fbbd/frameset.htm
Best regards,
DB49

Similar Messages

No system load data available in st03

Dear Guru,
When i am executing Tcode ST03 it is showing that "No system load data available"
when i am executing "RSSTAT83" report then its thriwing "LOGDB_SSCR_NOT_FOUND" dump.
statndard job getting cancelled thats why i hae change the status of all standard btc jobs.
but system is still too much slow. Right now there is no job running.my patch level is also 14 of both abap & basis.
What to do......

Hi Gaurav
this kind of error belongs to In correct time Zones, OS Time and R/3 Time was different, please set both time zones same in all clients using STZAC Tcode
again if not slove your problem then fallow this procedure.
It is possible that the workload collector is not schedule. To schedule the collector, choose, in Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.
if not scheduled hourly, then execute aboue report in SE38
Regards
Bandla

ST03 No System Load data available

Hi Experts,
       When am trying to execute ST03, it displaying the alert message like: No System Load Data available, can u plz, tell me why it's happening.
Regards
Mark

hi mark,
make sure all the default background jobs are running properly, make sure the following profile parameters are set
stat/as_collect   = 2
stat/as_level =   1
the following specify the maxiimum number of simultaneously existing dialog step or application statistics before the oldest data is deleted.
stat/as_max_files
stat/max_files
you must also activate the individual components of the application statistics by calling st03n and choosing
collector & perf. database -> statistics records & file -> application statistics

ST03N, No System Load Data Available, RSSTAT83, LOGDB_SSCR_NOT_FOUND

Dear SAP Experts
I am unable to execute "ST03N", the message is "No System Load Data Available".
System information said that I have to schedule RSSTAT83 hourly in TCOLL table, and I did that.
(For your information, I also already schedule RSCOLL00 hourly)
But when the job RSSTAT83 run, it was cancelled. The ABAP DUMP says "LOGDB_SSCR_NOT_FOUND". Error in SAP Kernel, The current ABAP "RSSTAT83" program had to be terminated because ABAP processor detected an internal system error. Internal program table SSCR not found. I checked SSCR table through SE11 and the table exists.
Strangely this only happen in my Production system, my Development running well with ST03N
And Yes I have been searching through this forum and Google, but not yet found the solution. The only solution I've got is update my kernel.
Are there any solutions for this problem?
Regards,
Kursteilnehmer

Hi
Your Database Not supported . Please check background job log.
Run se38 and execute RSCOLL00 one by obe via debug mode.
You get the result
Regards
Ravi.S

Loading data from Cube to Planning area

Hi,
If I am loading data from a cube to a planning area using transaction TSCUBE,
does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
For example,
I have my CVC as Plant, Material, Customer
If there are 4 CVCs in the POS that were previously generated as
Plant--Material--Customer
01--M1--
C1
01--M2--
C3
01--M2--
C2
01--M4--
C5
If the cube has data like this:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
(doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
Only for the 3 combinations that exist in the cube and not load anything for the last one
OR
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
01--M4C5--
0
Load all 4 combinations and send 0 as the cube doesnot have this combination?
Hope I am clear on this question.
Thanks.

Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
We initially get data from R/3 to BW to APO like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
Plant--MaterialCustomer----Qty.
01--M1C2--
10
BW can identify changes in transaction data but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M1C2--
10
If I am looking at Plant and Material Level, my data is doubled.
So we are planning to do a full load that works like this:
1. Initial data like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
The CVC is created and the planning area has Qty.10
Then we delete the contents of cube and do a full load into the cube with changed customer
Plant--MaterialCustomer----Qty.
01--M1C2--
10
This time a new CVC is created. Then we have another 10 loaded into Planning area.
If the system loads all CVCs, then the it would send
Plant--MaterialCustomer----Qty.
01--M1C1--
0
01--M1C1--
10
If the system loads only combinations in cube,
then it loads
Plant--MaterialCustomer----Qty.
01--M1C2--
10
But the system already has another 10 for Customer C1 duplicating the values.
We are trouble in the second case.
We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
Hope I am clear.

*Can we do mutiple DTP's to load data from 2lis_03_BF and compress *

Dear Experts
We are loading data available in SAP BI from PSA level to cube 0IC_C03 from 2LIS_03_BF Data source using DTPu2019s
The data is already being loaded to 2LIS_03_BF Data source to retail cubes daily from a long time.
For our clients requirement, we have developed standard business content cube 0IC_C03.
I have transported the cube to PRD and now the issue is while running DTP
It is failing at 1250 data packet out of 2950 data packets
My question is can, I create a filter to load data using 0calmonth or plant to load all the material moments data in multiple DTPu2019s and can I compress all the requests in one go and make everything work to reconcile back with MC.9
Awaiting your replies
Thanks
Satish

Well, the first thing before doing anything is to find out why is it failing...
Check the DTP properties... Are you running parallel processes in the DTP and they fail to finish? Is it only one serial process and it times out? Any dumps in ST22?
Sometimes the issue is simple to fit, before you go ahead and make changes like this where you'll have good probabilities of locking processes while trying to write at the same time to the same tables...
Just a suggestion...

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

No Data Available (Flat File Loading Problem))

Hi Friends,
I loaded the data from FlatFile(Application Server) I am able to see in the Preview
but the data is not laoding into the Cube. Request status is green but with zero records.
Following is the message
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system
Can anybody help
Regards,
CV

Hi chakri,
first u have cto check ur flat file in the Presentation server OR Application server
2. Ur flat file fields sequence same In the Trasfer structure .
U should maintain the same sequence in Transferstructure what u have maintained in the flat file.
3. when ur loading date from flatfile source System u have to use FULLUPDATE mode .
check the above .
Thanks,
kiran

R12 Interface table for loading data from 3rd part payroll system

Hi All,
Can anyone help me to have a lists and detailed technical information of available interface table on Oracle R12 for importing/loading data from third party payroll system. And what should be the best way of importing the data? It should be load first to AP then to GL or load it directly to GL?
Any help much appreciated. Thanks.
Cyrus

Hi Cyrus,
Can you please let us know your business requirements of this integration, i.e what business want to acheive out of this integration.
It depends on what your business requirements are wether to send only accounting information from payroll system to your Oracle GL ( then you can integrate Payroll system to Oracle GL directly, by sending the accounting information from your payroll) or if your requirement is to create payroll related invoices in AP and then do payments in oracle AP and then pass accounting information to GL ( then integrate your payroll to AP)
Regards,
Madhav

Error loading data from bw table into BW system

Dear all,
I have created and fill z tables in bw system, and try to load data into same bw system.
What i am facing is error message saying "Error in module RSQL of the database".
and when i check st22 for dump analysis, it says:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
how come?
Thanks

Can you try again by activating the generic datasource in RSO2. It should work.
And also make sure the tables are active.
Ravi

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

While loading data from r/3 to bw error 8 /error in source system is coming

while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .

Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check'

Source System Creation in BI to load data from ECC 6.0

Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.

Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu

How can I load data with Scripts on *FDM* to a HFM target System????

Hi all!
I need help because I can´t find a good guide about scripting on FDM. The problem I have is the next one.
I have on mind to load my data with data load file in FDM to a HFM target system, but I would like to load an additional data using an event script, ie after validate. I would need any way to access to HFM system though FDM Scripts, is it possible??
If so, It would be wonderful to get a data from HFM with any Point of View, reachable from FDM Scripts in order to load or getting any data.
I´ve looking for a good guide about scripting in FDM but I couldn´t find any information about accessing data on HFM target system, does it really exist?
Thanks for help

Hi,
Take a look at the LOAD Action scripts of your adapter. This might give you an idea.
Theoretically it should be possible to load data in an additional load, but you need to be very careful. You don't want to corrupt any of the log and status information that is being stored during the load process. The audit trail is an important feature in many implementations. In this context it might not be a good idea to improve automation and risk compliance of your system.
Regards,
Matt

No system load data available

Similar Messages

Maybe you are looking for