System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

Similar Messages

  • Software metering date not available for selection sccm 2012

    Hi
    I have installed SCCM 2012. 
    While viewing a report for software metering date and year are not available for selection. they are blank. 

    thaks 
    I is showing after restart. 
    Now there is another problem. 
    When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
    Computers that have run a specific metered software program  
    NetBIOS Name
    Installed Site Code
    Last Usage
    Total Usages
    Average Usages per Day
    Total Duration (min)
    Average Duration of Use (min)
    Average Duration per Day (min)
    WIL-WNR-AV
    PUN
    11/16/2012 5:13:35 PM
    1
    0.03
    7384.27
    7384.27
    246.14
    How to know the the explanations for the underlined items ? 

  • New custom field in MCVBAK not available for selection in RSA5

    I added a custom field to the communication structure MCVBAK.  When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list.  Do I need to do something other than add to MCVBAK to make it available for selection?
    Thanks.

    Hi Boater,
    Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
    Thanks and Regards
    Subray Hegde

  • Creating InfoPackage: Data Targets not available for selection. Any hints?

    Hi,
    I have 5 ODSes which by design are to feed a 6th ODS. I created 5 update rules, using each of the 5 ODSes, separately as infosources.
    The problem is that under the Infosource tree, I see the system generated InfoSouce but while creating the Infopackage, under Data Targets tab, my 5 ODSes are not available. Infact, it gives me no data targets for selection.
    Any hints on what I might be missing in the steps?
    Thanks

    hi Amanda,
    say you have zods1 to zods6, and zods6 is feed by zods1-zods5,
    under infosource tree, you create infopackage from which ods's generated infosource ? i guess zods6,
    then yes you wont see any ods in data target, since zods6 has no further update to any data target,
    you will see zods6 in generated infosource of zods1,zods2,zods3,zods4,and zods5.
    you won't see all zods1-zods5 in one infosource unless they have update rules for all zods1-zods5 with same infosource.
    you will need to go one by one infosource for each ods's infosource.
    hope this helps.
    note : it seems recently you only reward 'solved' for the last reply, please note you can reward more than one star

  • Hierarchy not available for selection

    A new hierarchy is created in R/3 for the 0Customer,but is not visible in the RSA3 for selection ? is there anything else to be done to make it available under selection?
    -Sourav

    Hi,
    If you created a custom hierarchy based on sets then go to GS03 and check whether they exist and go to BW07 and check have you created a DataSource for it and the DataSource active.
    Then Go to RSA3 and check.
    Hope This Helps,
    regards,
    rik

  • ALV Grid: Cell not available for selection

    ALV GRID.
    How can I make a cell(or an entire column) not available to be selected?

    I was able to forbid users to click on cells that has got null values by:
    a) declare the column as hotspot when you are building the fieldcatalog (fieldcatalog-key  = 'X')
    b) inside the form "user_command", after reading the data inside the internal table, use something like:
    if  wa_it_alldata-accounting_doc_nbr ne space.
    processing logic
    endif.
    wa_it_alldata would be the internal table and can be prefilled by something like:
    read data table, using index of row user clicked on
            READ TABLE it_alldata_f INTO
            wa_it_alldata INDEX rs_selfield-tabindex.
    A more extensive eg can be found at: http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm
    Let us know if you still have the problem.
    Rajib

  • System profiler "information is not available" for PCI cards

    After swapping two cards in their slots, I get the message system profiler "information is not available" for all PCI cards. Mac Pro 4 core 2.66, OS X 4.11 server. The cards are still working. I tried clearing PRAM, etc. Is this a hardware problem or just system profiler being difficult? Is there any way to tell?

    That is a bit odd. Maybe try forcing kextd to run can resolve. You might be working off cached info and it is giving System Profiler a hard time. Run this command and then reboot:
    sudo touch /System/Library/Extensions
    That will update the modify time of the Extensions folder and trick the system into thinking you installed new drivers. This will force an update of the kernel caches when you reboot.
    Not sure it this will do it, but best I could think of.
    Hope it helps.

  • Output does not match data sheet as only 1 report was available for selecti

    Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

    You will need to provide much more detailed information before anybody can help.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The item is not available for your selected device

    Greetings  for everybody 
    really  i read this statement a lot 
    and i have  blackberry q10 
    and just i want to install viber for blackberry and i saw this "the item is not available for your selected device" 
    and its not for one app
    if u have  anything to do tell me i want to install a lot of appssssss from app world  
    thanks for  reading  
    sorry for long message  
    thanks agian 

    Viber10 is not released for the Q10, currently only for the Z3, Z10, Z30 and P9882 models
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Source system not available error

    If the error message is teling as source system not available
    so what can be the reasons for that and tell me the solution also.
    data cllection is incorrect
    so what can i do i have checked trfc connections every thing but every thing is fine
    so any body help me out in this.
    your suggstions will be rewarded.
    Regards.
    Vikram.

    Hi Vikram,
    Try the below mentioned steps:
    1. Check the connections on BW sysetem and R/3 system.
    Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
    2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
    appilication at the top node level as a whole, the try replicating the Data source
    with in your infoarea..
    Hope it would help ..if yes..assign points.
    Regards,
    Manu.

  • RFC to JDBC "No messages available for selection"

    Hi Guys
    I am testing my RFC to JDBC scenario, and on  sxmb_moni I get error: "No messages available for selection"
    on SE37 I have ran my RFC with a data.
    On SM59  I created and test my RFC destination its working fine, on the SM58 no errors, I am using
    BAPI_BANK_GETLIST as my sender and my DataBase table (SQLServer) is my receiver
    On my MM I have set access to constant INSERT
    What am I not doing right?
    Thanks
    Yonela

    Hi Guys
    As Bruno have specified I decided to reverce my scenario now it JDBC to RFC Synch but now the problem I am facing with is that I dont get a response back. I want it to return one field from my table.
    I am using the BAPI_BANK_GETLIST and  BAPI_BANK_GETLIST.Response, SQL Server as my database server.
    On my http://xxxxx:50000/mdt/channelmonitorservlet the JDBC sender is working fine but when testing the RFC Receiver I get the below error and went through lots of blogs still no luck.
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
    On my sxmb_moni my fllag is black and white which is what I wanted to see.
    Your suggestions will be helpful,
    Thanks
    Yonela

  • Why do I get message "back up disc is not available" for Time Machine?  It

    why do I get message "back up disc is not available" for Time Machine?  It's plugged in.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the text field.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • No dimensions available for selection in Query Wizard

    Good afternoon. I have created some presentations in JDeveloper and am quite happy with the results thus far. However, I recently began working with Reports and have stumbled across an error for which I may be responsible.
    I had no problems whatsoever in JDeveloper. When trying to create a query in Reports, there are no dimensions available for selection, only measures. I researched this somewhat and ran across the statement in the OLAP API docs that states the creation of 'measure folders' in the OLAP DB is necessary in order for that information to become avaiable elsewhere.
    I believe this hypothesis is correct because (please ocrrect me if I am wrong) JDeveloper uses JDBC to connect with OLAP by default. However, I believe that Reports uses the OLAP API.
    The reason I am not 100% certain that this is the culprit, is the fact that I am still able to see the measures; just that when I select the measures, there are no dimensions associated with them (which thereby prohibits me from proceeding in setting up the query).
    Has anyone else seen this behavior, and is it caused by not having measure folders setup? Thanks.
    -Jeff Trudeau

    Np. I am running the 9.0.3.4 maintenance release of JDeveloper and the corresponding release of BIBeans. As for Reports, I am running the version that was included with the latest 9i Developer Suite (release 2). I am not aware that a more recent version of Reports has been released.
    I am running a 9i database with the latest patches. Again, JDeveloper with BIBeans is working fine, but the problem lies in setting up a query in Reports. Thanks for the help.
    -Jeff

  • TC not available for one mac

    One office mac lost connection to TC, was working fine for quite some time. TC is not available for TM BU and AP utility does not see the device. But TC is & has been working fine for other wired macs and wireless MBP's. Read the threads and can't find any advice. Thanks in advance!

    Power down the computer and temporarily connect an ethernet cable from the computer to one of the LAN ports on the TC. Start up the computer and open AirPort Utility to see if it can "see" the TC now.
    To get backups restarted again, try the following:
    Power down the Time Capsule and wait a few moments, then power it back up.
    Now click System Preferences and select Time Machine.
    Choose Change Disk and click your Time Capsule to highlight it
    Click Use For Backups.
    Backups should continue where they left off

  • Valid size not available for this creation when using Greeting Card feature

    Using PSE9 with a Mac.  When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
    "Valid Size Not Available For This Creation".  (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working).  I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result.  Has anyone else run into this problem, and if so have found a fix?  Thanks.

    I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
    That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
    Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
    Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
    Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
    Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
    Copy your Photoshop project files (and any folders) to your mac.
    Open the project files as you would with any other Photoshop file.
    You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
    If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
    Good luck.

Maybe you are looking for