No the Linux ports visible to the Host

I have the W7 64bit Host Vox4.1.8 and two OL5.7 64bit Guests, Say G1&2.
The Host Only Network has been setup for the guests.
there have been the applications deployed on the both guests. all have been running no problem for a few months.
Now I have found no ports on the G1 are visible to the W7 Host, which was not the case before:
I can ping G1 server IP but no ports of G1 can be accessed from W7 Host;
I can access all the ports of G2 from W7 Host;
From G2 I can access all the ports of G1, and From G1 I can access all the ports of G2;
All the applications on G1 are running normal. I access the Host and Internet from G1 no problem.
I tried to turn off the firewall of the host but no luck.
I am not sure what have canaged on G1 since last reboot.
Please help with the troubleshoot.
Edited by: gadba on Apr 15, 2012 7:49 AM

please help me by giving the solution.Help yourself by fixing the connection settings OR your network. The error is very clear: no connection can be made to the database. So what could it be? Wrong IP? A firewall is blocking you somewhere?
Nobody can tell you, you are the only one with access to your server settings and network environment.

Similar Messages

The TCP/IP connection to the host localhost, port 1433 has failed.

Hi, im using sql server 2000,
i have declared this in my program:
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
Connection conn = DriverManager.getConnection(url,"sa","");and is giving me this exception:
run:
Got an exception!
The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out.
Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out. Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
        at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
        at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
        at java.sql.DriverManager.getConnection(DriverManager.java:582)
        at java.sql.DriverManager.getConnection(DriverManager.java:185)
        at factura.FacturaView.conexion(FacturaView.java:317)
        at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
        at factura.FacturaView.access$900(FacturaView.java:41)
        at factura.FacturaView$5.keyPressed(FacturaView.java:150)
        at java.awt.Component.processKeyEvent(Component.java:6225)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
        at java.awt.Component.processEvent(Component.java:6044)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2478)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
BUILD SUCCESSFUL (total time: 34 seconds)how can i solve this?
thanks..
Edited by: derok on Dec 8, 2010 1:31 PM
Edited by: derok on Dec 8, 2010 9:14 PM
Edited by: derok on Dec 11, 2010 1:51 PM
Edited by: derok on Dec 11, 2010 1:52 PM

tschodt wrote:
derok wrote:
1434 did not worked eitherWhat port is your SQL Server listening on?
List of active ports:
C:\> netstat -naboOn linux I would add -l and -t to only get listening TCP ports.netstat -nabo gave me this:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       1148
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\RPCRT4.dll
e:\windows\system32\rpcss.dll
E:\WINDOWS\system32\svchost.exe
E:\WINDOWS\system32\ADVAPI32.dll
[svchost.exe]
TCP    0.0.0.0:443            0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
[System]
TCP    0.0.0.0:2869           0.0.0.0:0              LISTENING       1528
E:\WINDOWS\system32\httpapi.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\RPCRT4.dll
[svchost.exe]
TCP    0.0.0.0:3306           0.0.0.0:0              LISTENING       2428
[mysqld.exe]
TCP    0.0.0.0:4400           0.0.0.0:0              LISTENING       2592
[nlsvc.exe]
TCP    0.0.0.0:7511           0.0.0.0:0              LISTENING       204
[raysat_3dsmax2010_32server.exe]
TCP    127.0.0.1:1028         0.0.0.0:0              LISTENING       3080
[alg.exe]
TCP    127.0.0.1:5152         0.0.0.0:0              LISTENING       188
[jqs.exe]
TCP    192.168.0.101:139      0.0.0.0:0              LISTENING       4
[System]
TCP    127.0.0.1:5152         127.0.0.1:1163         CLOSE_WAIT      188
[jqs.exe]
TCP    192.168.0.101:2869     192.168.0.1:4563       CLOSE_WAIT      4
[System]
UDP    0.0.0.0:500            *:*                                    908
[lsass.exe]
UDP    0.0.0.0:445            *:*                                    4
[System]
UDP    0.0.0.0:4500           *:*                                    908
[lsass.exe]
UDP    0.0.0.0:1434           *:*                                    3036
[sqlbrowser.exe]
UDP    127.0.0.1:123          *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    127.0.0.1:1135         *:*                                    3508
[iexplore.exe]
UDP    127.0.0.1:1040         *:*                                    1284
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\WINHTTP.dll
E:\WINDOWS\system32\upnp.dll
E:\WINDOWS\system32\RPCRT4.dll
E:\WINDOWS\system32\ole32.dll
[svchost.exe]
UDP    127.0.0.1:44301        *:*                                    2880
[PnkBstrA.exe]
UDP    127.0.0.1:1900         *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:1900     *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:137      *:*                                    4
[System]
UDP    192.168.0.101:123      *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
-- unknown component(s) --
[svchost.exe]
UDP    192.168.0.101:138      *:*                                    4
[System]Edited by: derok on Dec 10, 2010 11:04 AM
Edited by: derok on Dec 10, 2010 11:11 AM

Telent:could not open connection to the host on port 23 connect failed

Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSM

user9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access).

Could not open connection to the host, on port 23: Connect failed

Can anyone please help with this telnet problem on CISCO 877 ADSL Router
I am trying to telnet into my ISP Router remotely using public IP which has been dynamically assigned to the router by the ISP.
I can Ping the Router and I can also go out to the internet on that router but, I can not telnet into that router from Inside the Network nor Outside the Network. There are no Firewalls involved.
I have tried to clear the config and reconfigure it again, it does not help, I have also applied same config on another CISCO 877 ADSL Router it still does not work.
ERROR i get on the Command Prompt: Could not open connection to the host, on port 23: Connect failed
I have shown some of the Show Run out put below if that helps,
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit x.x.x.x 0.0.0.7
dialer-list 1 protocol ip permit
line vty 0 4
password 7 ***********
login
Manny Thanks
Punit

Find Below the Requested Sh run outputs
ADSL-ROUTER1#sh run | beg line vty
line vty 0 4
password 7 ***********
login
scheduler max-task-time 5000
end
I have removed the IP for security reasons
ADSL-ROUTER1#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
     x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
S       x.x.x.x/29 is directly connected, Vlan1
C       x.x.x.x/32 is directly connected, Dialer0
     x.0.0.0/32 is subnetted, 1 subnets
C       x.x.x.x is directly connected, Dialer0
S*   0.0.0.0/0 is directly connected, Dialer0
I also keep getting the message below on the console done know if this is part of the problem
Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
as reached its maximum threshold 16
Hope this output helps
Thanks

The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed

hi all,
i am using SQL2005 server as my database server. i am trying to connect this server in java (i mean using JDBC). i am using windows authentication to connect my sqlserver.
i have the url connection like this
DriverManager.getConnection("jdbc:sqlserver://127.0.0.1\\SQL2005/database name",username","password");
i am trying to connect the server using the above URL, but i couldn't connect it throws an error as the following.
The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties, check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, and that no firewall is blocking TCP connections to the port.".
could anyone plz help me to make the connection in right way.
i have tried to ping via telnet as well, even telnot not able to connect
plz help me...
thanks

Hi,
Besides Madhu mentioned, please check the TCP/IP port number of the instance of SQL Server.
1. Open SQL Server Configuration Manager, and then expand SQL Server 2005 Network Configuration.
2. Click Protocols for InstanceName, and then make sure TCP/IP is enabled in the right panel and double-click TCP/IP.
3. On the Protocol tab, notice the value of the Listen All item.
4. Click the IP Addresses tab:
If the value of Listen All is yes, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item under IPAll.
If the value of Listen All is no, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item for a specific IP address.
5. Make sure the TCP Port is 1433.
6. Click OK.
If there are any more questions, please let me know.
Thanks.
***Xiao Min Tan***Microsoft Online Community***

How to add sites to a SharePoint server on port 80 without using the host header?

Hello,
I have a SharePoint 2013 server with 5 sites on it. 2 are using port 80 and the 3 are using other ports. I like to add 2 more sites to the server. If I was going to add 2 sites with different ports that are not port 80, what do I need to
do? I noticed the host header file on the server has no sites configure in it.
How would I add 2 sites to the server that has 5 other sites?
Thanks
Paul

Where is the Calendar hosted at the moment? If it's within SharePoint, there is a "Connect to Outlook" button, which will export the calendar as a shared calendar to your Outlook instance. I'm never tried the reverse, so if you're using
a shared calendar, you may need to consider moving it. When they are linked, they'll be a two way synch (updates from one end will push to the other). On top of this, you and your team will be able to set-up differnet alerts.
Additionally, within the product you can create an overlay, calendar, which allows you to merge different calendars. Each source calendar can have a different colour picked for it.
In regards to running PS scripts as an end-user, not much if anything can be done here. All I can think of is adding a codeplex workflow extension, work that into a workflow and then plug a script into that. Your IT guys might not let that fly.
Hope that helps
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Why the host ports are also seen in the spanning-tree output ?

Why the host ports are also seen in the spanning-tree output ?
Switch1#show spann
VLAN0001
Spanning tree enabled protocol ieee
Root ID    Priority    32769
             Address     0000.0CA2.138B
             This bridge is the root
             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority    32769 (priority 32768 sys-id-ext 1)
             Address     0000.0CA2.138B
             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 20
Interface        Role Sts Cost      Prio.Nbr Type
Fa0/1            Desg FWD 19        128.1    P2p
Fa0/2            Desg FWD 19        128.2    P2p
Fa0/15           Desg FWD 19        128.15   P2p
interface FastEthernet0/15
description PC0 Interface
switchport mode access
spanning-tree portfast
interface FastEthernet0/16
I read somewhere that all the ports of a switch will participate in STP by default. Is there any way to remove the STP operation on host ports ?
Regards,
Chandu

All ports participate in Spanning Tree by default.
Spanning tree is there to block redundant L2 paths in order to prevent loops. All ports are capable of causing a loop so you would not want to turn spanning tree off, in fact I don't think you can switch it off on a per port basis. You can switch it off on a per vlan basis.
You are already using portfast which allows host ports to transition into a forwarding state without going through the listening and learning states of STP. If you switch off STP on a port, you risk the chance of a L2 loop.
https://supportforums.cisco.com/docs/DOC-5180

What is the host-optimized port?

thanks

In a nutshell, host optimized ports are over provisioned internally, while target optimized ports have full internal bandwidth.
Host optimized ports normally exist in 8 port groups, where those 8 ports share a lower bandwidth "hidden" port internally. Think of it like chaining switches internally.
Now, you can configured host optimized ports for targets, or ISL's, you just have to be careful not to over provision that hidden port that services the port group.
Here is a snipped from MDS documentation that describes how to do that
Configuring 32-port Switching Modules and Host-Optimized Ports
The 32-port 1/2-Gbps switching module contains 8 port groups of 4 ports each. When configuring these modules or the host-optimized ports in the Cisco 9100 Series, the following guidelines apply:
â¢Any (or all) full line rate port(s) in the Cisco MDS 9100 Series can be included in a PortChannel.
â¢The host-optimized ports in the Cisco MDS 9100 Series are subject to same PortChannel rules as 32-port switching modules--only the first port of each group of 4 ports is included in a PortChannel.
-You can configure only the first port in each 4- port group (for example, the first port in ports 1-4, the fifth port in ports 5-8 and so on) as an E port. If the first port in the group is configured as a PortChannel, the other three ports in each group (ports 2-4, 6-8 and so on) are not usable and remain in the shutdown state.
-If any of the other three ports are configured in a no shutdown state, you cannot configure the first port as a PortChannel. The other three ports continue to remain in a no shutdown state.
In the Cisco MDS 9100 Series, the left most groups of ports outlined in white (4 ports in the 9120 switch and 8 ports in the 9140 switch) are full line rate like the 16-port switching module. The other ports (16 ports in the 9120 switch and 32 ports in the 9140 switch) are host-optimized like the 32-port switching module. Each group of 4 host-optimized ports have the same rules as for the 32-port switching module.
If you found this helpful please rate it.
--Colin
www.colinmcnamara.com

Access SOA suite installed on VM via the host operating system

Hello All,
Is it possible to create connection to SOA Servers/Domain/WLS which are part of VM from the Host machine on which VM is running.
If yes , how do I configure the same.
thanks

Yes, but it depends on how you have configured the network of you VM, e.g. bridge, dhcp, NAT.
If you want to to remain constant every time you start the VM, NAT is the only option. This means that the IP address of your VM is always the same.
By default it uses DHCP. Not sure what you are wanting to do but if you want to make a basic connection find the IP address of your VM
ipconfig (windows)
ifconfig (linux)
then from the host machine you can gain access
http://ipaddress:port/console
if you want to deploy you may get errors due to HTTP connections. To fix this you need to set the internal and external host in the Admin Console. Login to the console and go to I think preferences -> advanced and you should see an entry for external listening host and internal listening host. set this to the ipaddress. If dhcp you will need to chnage every time.
cheers
James

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

Java.sql.SQLException: The TCP/IP connection to the host has failed.

Hello. I hope you had a happy new year! Now its back to work.
I am having a problem connecting to a remote SQL Server DB. I am using NetBeans 5.5 and the latest J2EE. I am able to see the tables in the IDE and bind objects to data. But when I run it it gets this:
java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: no further information
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:100)
at com.sun.sql.rowset.internal.CachedRowSetXReader.connect(CachedRowSetXReader.java:344)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:126)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:968)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1428)
I checked the SQL Server Configuration manager on that machine and TCP/IP connections are allowed. What else could be wrong?
Thank You.

"Connection refused" means that the client sends a packet saying "I would like to connect to port number NNNN please" to the server computer, and the server computer's OS sends the reply "there is no process listening to that port on the network interface you are using".
The database server is not running, or running but not listening to TCP/IP connections, or at a different port from what you think, or listening to only selected network interfaces (it is possible for a process to listen to a specific interface or a wildcard for all interfaces). A less likely scenario is that a firewall is sending the "connection refused" message.
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port. You need to configure the database to accept TCP connections; the server documentation or google should explain how.
- Try "telnet server-host-name the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try telnet with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

Telnet not working i need help : Could not open connection to the host !!

hello all im back today with big problem with telnet i dont know why !!
i have to computers one of them in my home and the other one in my office both of them use windows 7 so
home PC internet IP : 82.205.100.161
office PC internet IP : 82.102.237.175
so i go to control panel and then to windows features and i check Telnet Client and Telnet server
then i turn off my firewall
then i start telnet service
then i execute netstat -ab to know telnet port :
[tlntsvr.exe]
TCP [::]:135 Hacker-HP:0 LISTENING
is there anythink i need to do to get that damn connection over internet NOT LAN !! pleaze help me i still get this sucks error : Could not open connection to the host
peace
Dr.BL@CKDeaTH

Hi,
Telnet server use TCP port 23 by default.
Here is a screenshot of my lab server,
To verify if the TCP port 23 has been opened, we can use the portqry tool.
Here is the download link,
http://www.microsoft.com/en-us/download/details.aspx?id=17148
Best Regards.
Steven Lee
TechNet Community Support

How can IC WebClient determine the host name for free seating?

Hi,
I want to determine the host name at CRM application server by ICI interface for free seating scenario.
There is a TCODE CRMM_IC_GFS to set 'Host Name Identification Applet'. But when I check on it, all buttions in IC Webclient disappeared. I followed the note 812399 to change Java security configuration, but the synptom still exist. Do anybody now how to? Thanks!
BR,
Hao

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network.
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
4. Configure any firewall in use to pass this traffic.

I can't email photos from Windows Photo Gallery anymore, it says the host "mozilla firefox" cannot be found. what do I do?

A window pops up and says, "The host "Mozilla Firefox" could not be found. Please verify that you have entered the server name correctly. Subject "remove", account; 'pop3', server; 'mozilla firefox', protocol: smtp, port; 25, secure (SSL); no, socket error; 11001, error number; 0x800ccc0d " Tasks" send 36 messages using 'pop3', status failed connection local area network I used to send photos all the time, now they don't get sent. What can I do?

Open the older library with the Finder
and look in the Originals folder to see if the full sized files are present. If they are you can make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
2. delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options.
Fix #3
Use iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

OEM is not running after changing the host ip in Oracle10g !

Dear Friends ,
I am installing Oracle10g in Linux RHEL 5 . After installing , I have to also configure OEM database control interface successfully . During installing I use IP '192.168.0.1' , and configure OEM using this ip . But after some times I need to change the host ip address only , then I cannot browse the OEM interface . It shows blank page and give the below error :
[oracle@app log]$ tail -10f emoms.log
2010-05-31 12:08:11,712 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2010-05-31 12:08:11,713 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
In this moment , would anybody plz tell me , How can I resolve the problem when ip of the host is changed or hostname is changed .
here I mention that , I already change ip into below files successfully :
- network interface
- listener
- /etc/hosts
Waiting for kind reply ... ...

Do not need recreate OEM repository.You have to need change some file`s context. try do following.
1.Go $ORACLE_HOME\<HOSTNAME>_<SID>\sysman\config then edit emoms.properties file. Change following parameters with properly(correct) values(using new IP address):
oracle.sysman.emSDK.svlt.ConsoleServerHost,
oracle.sysman.eml.mntr.emdRepServer,
oracle.sysman.eml.mntr.emdRepConnectDescriptor.
2. Go $ORACLE_HOME\<HOSTNAME>_<SID>\sysman\emd edit targets.xml file. Change
<Property NAME="MachineName" if different real name .
3. export ORACLE_SID=<SID>
emctl start dbconsole

No the Linux ports visible to the Host

Similar Messages

Maybe you are looking for