No user group created for Ad hoc query

Hi
When I am trying to access a standard tcode S_PH0_48000513 - Ad hoc query, under info system - reporting tools, system is throwing an error " no user group created".
I have already tried in SQ01,SQ02 and SQ03. What should I do for this?
Points wilb be Rewarded for suitable answers.
Thanks
Rajesh

Hi,
Hope you created an infoset.
Now go to SQ03, here you select one User Group and the the user below, and click on Assign Users and Infosets. Here you need to enter the USER ID for which this AD HOC query should be made available including the INFOSET, just checkmark against the INFOSET and save. Now you will be able to see the same.
Regards
Team Member.

Similar Messages

  • No user groups created while opening Ad HOC Query

    Hello Folks,
    When I try to open "S_PH0_48000513 - Ad Hoc Query" under Human Resources->Information System->Reporting Tools I get the error message "No user groups created".
    Can someone please let me know what kind of groups are needed to be created and how (details) so that I can use the Ad Hoc Query Program.
    SAT

    Hi,
    Create a user group in SQ03 and attach query .
    Regards,
    Manoj.

  • No user group created - Adhoc Query transaction error

    Hi there,
    Whenever I try to access the Adhoc Query transaction S_PH0_48000513 i get the error "No user group created". The required user groups are present in the system.
    Any idea why am I getting this error?
    Regards,
    Anjali.

    Hi Anjali,
    Pls check if the infoset of your query is assigned to the user group through SQ02-> Role/User gr. Assignment.
    Regards,
    Dilek

  • How can we restrict the other user to add their user id's to the user group created in SQ03?

    Hello All,
    How can we restrict the other user to add their user id's to the user group created in SQ03?
    When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
    I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

    How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
    http://scn.sap.com/thread/3536135

  • Tcode problem for ad hoc query

    Hi frdz,
    I created user group, infoset, queries in DEV environment and then after I down loaded the all those and uploaded into Quality and working fine.
    Now I created T code for each query in DEV and transported the same into Quality, here the problem is Tcode is working fine in DEV but when I try to execute Tcode in Quality the system terminating the programme and throwing Runtime error. so then I gon through dump it is stating LOAD_PROGRAM_NOT_FOUND and showing the programme name like this Program "AQ80ZHRINDIA_HR=APPL_ADD_NONIN " not found.
    But I uploaded the programme is different that is AQFUZHRINDIA_HR=APPL_ADD_NONIN. So could u pls give solution whethet I did right process or not. Is there any other way pls let me know.       $ Lakshmi

    HI programme
    thanks for reply.
    I found the problem i.e., when ever we upload program in to client it's automatically changing according to client name. So I think query depends on client to client so in this juncture we cant able to create Tcode and transport to another client.
    As well as I have created all those in STANDARD client, but if we go through sys it is showing STANDARD and GLOBAL cilents, which is relavent to create the all above process.
    Hence pls let me know is there any way to give query authorizations to users.
    Answer would be awarded.
    $ Lakshmi
    Message was edited by:
            Lakshmi

  • Dynamic User Group Role for ASA 8 ACS 4 External Windows DB

    1. I've successfully got a Win2003 AD user to authenticate to the ASA via an ACS but the default group settings the dynamic user becomes part of don't get transfered to the user. How do I get the user to adopt the group settings?
    2. ASDM recommends nabling authentication for admin console sessions so you don't ssh into a box then have to login as the enable password which isn't logged. When I check the box for this feature I can ssh to the ASA but my password is denied ASA. How do I keep the user credentials all the way to the privilege exec mode?
    3. Back in the day I could configure the ACS shell, privilege 15, custom attributes cisco-av-pair "priv-lvl-15" to get a user to jump directly to privilege exec mode. This doesn't work now. Is there a different way to do this on ACS v 4?
    Thanks in advance,
    Matt

    Try this:
    aaa authentication enable console
    aaa authorization command
    on ACS go to the user or group that the user is in and go to enable options and click on "Max Privilege for any AAA client" and set it to "15". Then go to the "tacacs+" section on click on "Shell(exec)" and click on "Privilege leve" and enter 15. Then go to the "Shell command authorization set" and set the default to permit any commands not listed. This will get the user into privilege mode. In ASA/Pix it requires command authorization and authentication for enable console. On IOS it requires that you use aaa authentication exec and then the aaa authorization exec/command. This will allow the user to go straight into privilege mode instead of user mode.

  • ALVIN User Group Meeting for September

    MEETING NOTICE:
    ALBUQUERQUE LABVIEW INTEREST NETWORK (ALVIN): Meeting, Thursday, September
    20th, 2007 at 11:15 AM at the CNM Workforce Training Center, 5600 Eagle
    Rock Avenue NE, Albuquerque, NM 87113. The topic for the September
    meeting will be ³LabVIEW Nuggets: pearls of wisdom from NI². For more
    information please visit the ALVIN website at www.alvin-nm.org and click
    on the ³Meetings and Events² link.

    We've held two additional OLSUG Meetings since this event. You can access them here:
    http://otn.oracle.com/industries/life_sciences/olsug.html

  • How to change user group of a query (sq01)

    Hi,
    I'm working with SAP Queries (SQ01) and I don't know how can I change the user group assignation of a query. We did only one user group for all users and queries and know in order to arrange it a bit we've created three user groups.
    We know how to assign users to new user groups but for each query of the old group we neet to move it to one of the new user groups, how could we do this?
    thanks in advance

    Hi
    pls go through these links
    http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
    Step-by-step guide for creating ABAP query
    http://www.sappoint.com/abap/ab4query.pdf
    ABAP query is mostly used by functional consultants.
    SAP Query
    Purpose
    The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
    Features
    SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
    All the data required by users for their lists can be selected from any SAP table created by the customer.
    for more information please go thru this url:
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
    http://goldenink.com/abap/sap_query.html
    Please check this PDF document (starting page 352) perhaps it will help u.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
    check the below link will be helpful for u
    Tutorial on SQVI
    once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same

  • Ad-hoc  Query - Travel Privilege Field Group

    Hi am new to this Ad-hoc Query...
    can any body tel me this.
    Asia HR is currently using/assigned to AQB : ZHR_UG_01 ABAP Query: User group and AQS: ZHR_PA_ASIA SAP Query: InfoSet which does not include the Travel Privilege Field Group.  The same Travel Privilege Field Group is already included in the Global infoset AQB - ZHR_UG_01 - ABAP Query: User group and AQS - ZHR_UG_01 - SAP Query: InfoSet
    Please tel me how to create ASIA HR as per the requirement.
    Thanks in advance..
    Regards,
    kalam A.

    Hi Kalam,
    seems that you simply have to add this field to the use InfoSet in transaction SQ02.
    Regards,
    Michael

  • Creating user groups using SQ03.

    I am going to make a change to a already existing query 01 in the user group /SAPQUERY/AM. I am not a query expert, in fact this is the second query that I am modifing. I am reading some documentation that the first thing that I have to do is create a user group. from what I am reading, the user group will contain the users that are allowing to modify queries. Since our users do not use this tool, I am the only one that creates and modifies queries. I think I am going to create a user group and that my user-id will be the only one in the group - correct? will I create one user group and and queries that I make changes to in the future user this user group or do I create user groups based on the users group that are defined by SAP. example - If I am changing a query in /SAPQUER/AM  and in /SAPQUERY/AU - would I create 2 user groups  1 for AM and 1 for AU or would I create only 1 user group and use it for both queries.
    After this, I think I have to copy the infoset (SQ02)and the query (SQ01) to custom names (names starting with Z) and then attaching the parts to the new user group.

    Hi Timothy
    Typically you want to create user groups for functional areas or grouped reports/queries. You can enter as many users as needed into a user group and only those who have the checkbox next to their name in the user group screen will have authorization to create/modify queries in the infosets where the usergroup is assigned. If you are creating 2 usergroups with the same users and authorizations then that is redundant but if the list of users is different or the authorizations may change then it would make sense to have 2 usergroups. You should have some naming convention to follow when creating the queries but the Z prefix is not required.
    Andy

  • Default dashboard page for each user group

    How can I set for each user group (or for each user) which dashboard will be opened as the deefault after login?
    Can I also set the default page in that dashboard?

    Hi,
    Under Settings->My account->Preferences->User can select his default dashboard.Is it ok?
    If you dont want them to select that option,you need to redirect them...You can use that blog....
    Create a table in db with two columns-User, Portalpath
    In initialization blog give query to fetch Portalpath from db based on user login... Follow steps from blog...
    Check this blog....http://bintelligencegroup.wordpress.com/2010/09/23/external-table-authentication/
    Clear explanation for external table authentication....in the same way you cna do but take two columns user,portalpath and follow the steps in blog.
    Regards,
    Srikanth
    Edited by: Srikanth Mandadi on Oct 7, 2010 1:44 AM

  • Retrieving user detail, group name for all users

    Hi,
    How can I retrieve User name, email, authentication, user group name
    for all users using SDK.
    It is possible to create this report in webi or CR?
    Thank you for reply,
    Gregor

    Use the following code to retrieve this information:
    IInfoObjects users = oInfoStore.query("select * from ci_systemobjects where si_kind='user'");
    for (int i=0; i<users.size(); i++)
             IUser user = (IUser)users.get(i);
             // user.getTitle(); for user name
             // user.getFullName(); for user's full name
             //  user.getEmailAddress(); for user's email address
             //  for authentication type:
             IUserAliases alises = user.getAliases();
             for(int j=0; j<aliases.size();j++)
                       IUserAlias alias = alises.get(j);
                       // alias.getAuthentication() for authentication associated with this alias, since same user can have more than 1 authentication. e.g. Enterprise and Ldap.
             // for user group memberships:
             java.util.Set groups = user.getGroups();        
             // the groups Set object will contain SI_ID of all the user groups that this uses is member of. You need to query by the SI_ID of the usergroup to get the group names.
    //  e.g.
    //    oInfoStore.query("select si_id, si_name from ci_systemobjects where si_kind='usergroup' and si_id in (a,b,c....)");
    where a,b,c are the SI_IDs of the usergroups.
    To create a report based on the above fetched data, there are several methods such as:
    you can use Java resultset where in you create the report structure in designer and push the data at runtime using java result set objects. Another way is to push this info in Excel or Access and design your report based on that excel\access.

  • Mass creation of common folders for different user groups

    Hello Experts,
    We are using Portal 7.0 SP12 and we have 10 different user groups created in Portal.
    Based on this group structure, we need to create two common folders in each of the user's personnel documents in KM.
    Is there is any way to achieve this kind of requirement ?
    Can we do mass creation of these two common folders which will be assigned to all of the groups. This needs to be done in user's personnel documents and not in Public documents.
    Any help in this context would be highly appreciated. points assured.
    Thanks in advance,
    Anil Kumar.

    For every user a folder is created in userhome. One approach is to capture this folder creation event and create the folder structure you need. You need to develop a portal service which will listen to events from userhome repository.
    1. Capture folder creation event for user home
    2. Create the folder structure you want in this event handler
    Check this documentation on how to do this.
    https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/rf/client_api/rf_client_api.html
    Regards,
    Prasanna Krishnamurthy

  • Move a query to from one user group to another user group

    Hi,
    it's possible to move a query (SQ01) from one user group to another user group ??
    Thank you.

    Hi,
    You can copy queries only if you have the authorization to make changes. Within your current user group, you can copy all queries. However, queries of other user groups can only be copied if the InfoSet used to define the query is assigned to both user groups.
    To copy a query, proceed as follows:
    1. Choose the name of the query you want to copy on the initial screen.
    If you do not know the name, use the directory functions to display the query directories and then choose a query to copy from there.
    2. Choose Copy.
    3. Enter the name and the user group of the query that you want to copy in the dialog box. Furthermore, you must enter a name for the copied query. The system proposes values for this.
    4. Choose Continue.
    This takes you to the initial screen. The query is added and appears in the query directory. You can now continue.
    Regards,
    Amit

  • Ad-Hoc Query for OU's and their Cost Center

    Cost Centers are often inherited from parent OU's. If I try to make an Ad-Hoc query, select some OU's and show the Cost Centers via the relationship A11, the fields are empty unless the Cost Center is hardcoded for the OU.
    Is there a way to create an Ad-Hoc query that shows the Cost Centers even if they are inherited? I can't make any changes to system tables or other customizing.
    Thanks in advance!

    Unfortunately I'm not authorized to use SE16.
    This is my selection:
    Object ID: xxx (Selection)
    Object Type: O (Selection)
    Plan Version: 01 (Selection)
    Relationship Between Objects: 011 (IT1001)
    Relationship Specification: A (IT1001)
    Type of Related Object: K (IT1001)
    Output:
    Object ID (IT1000)
    Object Abbreviation (IT1000)
    Object Name (IT1000)
    ID of Related Object (IT1001)
    Any other way?

Maybe you are looking for