No versions for WIP/RA defined in controlling area
Hi,
While doing settlement thru CJ88 getting the message .
No versions for WIP/RA defined in controlling area XXXX
Message no. KJ 473
Regards
Hi,
Apart from maintaining Version also check the other related configuration for RA has been maintained and then execute the RA.
regards
Sreekanth
Similar Messages
-
I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?
Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products -
What are criterias for defining various controlling area in oprating concrn
Hi All,
for a holding with various businesses, I'm looking for criteria or characteristics to:
1- divide client into multiple operating concern? ("best Practice" characteristics)
2- divide an "operating concern" into multiple "controlling area"?
I'm confused in dividing a holding in how many operating concerns and controlling areas?
which solution is better: few operating concern with various controlling area within each one OR more operating concern with fewer controlling area within each operating concern?
Best RegardsDear Piet Strydom,
thanks for your quick response,
there is special situation: our holding produce and distribute wide range of products in A country,
some manufactures in our holding produce same products with various brands (for example Company A and its partner company B produce keyboards under brand X and company C produce the same keyboards with brand Y), because of market uniformity we plan to group them (company A& B&C) in an operating concern, now:
1- is it a correct decision to group all manufactures (with various brands-same products) in one operating concern?
2- if we do so, isn't it right decision to divide each brand manufactures group in a controlling area? in other word we assign for each brand a controlling area? (one controlling area for both company A&B and another controlling area for company C)
Best Regards
Mohammad
Edited by: Mohammad Molana on May 17, 2009 12:19 PM -
PA only for some CC under some controlling area
Hello!
If all company codes are under the some controlling area, when CO PA operating concern is created, how can I activate CO PA only for some company codes and not to others?
Is there a way we can restrict all postings to PA only in some company codes?
What are the basic steps to activate planning in CO PA?
(transactions, procedures, etc)
Many thanks in advance!
AlexandraTry Season Pass FAQ's > iTunes Store: Complete My Season frequently asked questions (FAQ)
-
Version 0 is not defined for fiscal year 2012.
Hello Experts,
While am tring to release a work order, i am getting the below error.
Version 0 is not defined for fiscal year 2012.
Message no. GP626
Diagnosis
The version 0 is not defined in controlling area DE06 for the fiscal year 2012.
You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
System Response
The version 0 cannot be used for fiscal year 2012.
Procedure
Maintain the fiscal year-dependent version parameters for the version 0.
Execute function
By this what i understood is we need to change the Settings for each fiscal year for the version 0 in controlling area DE06.
i.e. we need to add the fiscal year 2012 in that.
Is this correct????
If yes what will be the impact of adding 2012 in that screen?
i think its a soft config only.
Please let me know the correct process
Thanks in Advance,
SatyaVersion 0 is not defined for fiscal year 2015.
What to do next ? Please help with it. -
While creating sales order got error version "0" is not defined for company
Hi,
i got a error while creating a sales order(va01) ,i got an error
saying that "version 0(zero) is not defined for company code
if there is any solution please provide....
Thanks®ards
kishore kumarGo to TCODE:OKEQ
1)select version 0 here and ext select settings for each fiscal year under controlling area settings
2)give your controlling area XXXX and version 0 then enter
3)select new entries maintain data for new year 2008.
Hope this will give u
Sri -
Alternate option for having 2 Controlling Areas
Hi Experts,
Please analyse the below business requirement and provide your valuable feedback.
Currently the business side has only one Controlling Area -1000 and all reports are built off of the Controlling Area and
not Company code. Also, all consolidated Company codes roll up to the Controlling Area 1000. Now business want's 2 different reports for there 2 major business lines. And there is no way to run a report for those 2 business lines.
Is it advisable to have 2 diffrent controlling areas. In my opinion it should not be advised and its not a best practise.
Any other way to fulfill the reporting requirement by having current controlling area only?
Can Version design be of use in this scenario ? If yes kindly throw some light on version control as well.
Thanks in Advance!
Regards,
AjayHi Ajay,
If the Business is vertical you can define two controlling areas
Example:
Constructions
Telecom
Trading
Manufacturing etc...
If not you can difine Company codes/Plants would be better.
Hope it will clear
Regards,
Kishore K -
Extraction error "Target cost version in controlling area does not exists"
Hi Gurus,
I am trying to pull some data from a SAP OLTP system into SAP BW 710 system, using extractor "0CO_PC_02". The data load is failing with the below error message:
Target cost version in controlling area does not exist KN 147
Target cost version 2 not defined. Check your entry KV 35
Internal program error ( Order 000010510554 Version 002 ) RM 11
Errors in source system RSM 340
The same error is thrown when I am trying to execute the extractor in RSA3 in the source system.
Please help me with the resolution of the same. It's a high priority job we are handling as of now in this.
Thanks & Regards,
Vikas Kr.You are attempting to display data on a target cost version that does not exist in controlling area.
see this http://forums.sdn.sap.com/thread.jspa?threadID=1609418
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YV-KN147 -
User exit for merging the credit limit in different credit control area.
Dear All,
Please provide user exit for the merging the credit limit in different credit control area as well as logic for the same.
I have to merge the overall credit limit of the customer for some divisions. At this time in one company code we have created 9 credit control area as per product line. While creating customer master data and Credit management (FD32) user has assigned the different limit with respective to credit control area e. g Customeru2019s total limit assigned is 10 laks. For credit control 1100 Limit is Rs. 3 laks and for credit control area 2200 limit is 7 laks. Now the user wants to merge the credit limit for only above two credit control area. The sales orders should get created in any credit control area up to 10 laks.
Regards,
SureshDear Damodhar/All,
Would you please explain me prerequisite setting from functional side for these user exit?
I want complete functional setting prior to ABAP application so that it work properly post configuration.
Regards,
Suresh -
Restricting Authorisations for different controlling areas
Hi SAP Gurus,
I am facing a problem in restricting authorisations for CO Transactions in different controlling ares. We have a new controlling area started recently. But the CO user in this new controlling area is able to create master data in a differnt controlling area (i.e. the old existing controlling area). we have already maintained the new controlling area as org. unit for the relevant company code.
Giving below an example.
For t.code KAH1 & KAH2, we have maintained authorization object K_CCA for New Cont Area with Cost Center group X (Where X is standard hierarchy). Even after that user is able to make changes in KAH2 for another controlling area. We also tried to put value of profit centers instead of "*". This too is not helping.
Similarly the user is able to create master data in Tr. Codes KO01 / 02, KE51 / 52, KCH2 etc where this user in new controlling area is able to create / change master data from exising old controlling area.
Can anyone help me please ?
Thanks.Dear Prasad,
Create a new Role using T Code PFCG and assign the new controlling area and the other relevant
details and you can assign it to the users.
I think in your case that particular user is assigned many roles where he has got * value and its allowing
to make changes on some other controlling area.
Regards
Mangalraj.S -
Change chart of accounts in Controlling area
Hi all,
How can I change the chart of accounts in controlling area?
I've already changed chart of accouns in FA CoCode Global data, and I have to change chart of accounts in controlling area; In OKKP chart of accounts is in display modeI get the message; where I have to assign Chart of acc to Controling area in OKKP is not possible
Differing charts of accounts: INT - CAXX
Message no. KT299
Diagnosis
The system makes consistency checks during assignment of a company code to a controlling area as part of assignment control.
The same checks take place if assignments already exist and you change the basic data in the controlling area, or if you define the controlling area and company code as a 1:1 structure.
If the check finds an error, the system cannot execute the function ("Assign" or"Change basic data"). If you do not maintain the required data for the consistency check (such as currency, chart of accounts, or fiscal year variant in the company code), this also results in an error message.
Chart of accounts INT, controlling area XX01, does not agree with chart of accounts CAXX, company code XX01.
System Response
Processing is terminated.
Procedure
Ensure that the same chart of accounts is assigned to controlling area and company code. -
Assign Chart of account to Controlling area
Hi,
Why we assign Chart of account to Controlling area ?
Regards,
PankajHi,
First of all I would like to tell you that we don't assign Chart of Accounts to a Controlling Area. It is the Company Codes that are assigned to the Controlling Area.
Now, the basic purpose of defining a Controlling area is that we want to capture cost and revenues for Internal Management Reporting. So this is where the Internal Accounting comes into play where we want to know about the internal reports pertaining to product cost, cost center reports, profit center reports, margins, contributions etc. All these helps us to analyses the "Bottom Line"- Profit.
But the question that arises is how the expenses that are arising at the Financial accounting level be moved to the controlling area level? For this we assign company codes to a controlling area, but they should have the same chart of accounts and same fiscal year variants. Now the chart of accounts are nothing but a classification of structure and basic information about the G/L accounts. The expenses that the company is incurring for its smooth operations are captured in the G/L accounts. The G/L accounts are defined under some specific Accounts group e.g.. Administrative Expenses, Depreciations, Secured Loans, Sundry Creditors etc. The frame work of these account groups is contained at the Chart of Accounts level.
So how should we make these values flow from FI to CO? The answer is that we will create these G/L accounts as Primary cost elements in Controlling. This ensures that expenses in Fi and the Primary Cost Elements in Co can be reconciled. So now there is a link that is been provided between FI and CO. This enables us to get both Eternal and Internal reports. Now, when we are assigning more than One company codes to one controlling area, then we should also have the same chart of accounts and G/L accounts so that we are able to draw reports easily without any discrepancies in the G/L accounts. For Company codes having different chart of acounts, we need to assign them to different controlling areas.
So in brief this is the role of Chart of Accounts in Controlling. I hope that you would be satisfied with the answer.
Regards,
Dhruv. -
One or More Credit Control Area assinged to one company code
HI Guys,
In credit management , the below said customizing is done by FI.
Financial Accounting Customizing
Financial Accounting  Accounts Receivable and Accounts Payable  Credit Management  Credit Control Account  Assign Permitted Control Areas to Company Code
Can any one explain why and for what purpose assign permitted control areas to company code.
Because one control area can be assigned to one company code. If not please clarify.
Regards,
SaiCredit Control Area
Definition
An organizational unit that represents the area where customer credit is awarded and monitored.
This organizational unit can either be a single or several company codes, if credit control is
performed across several company codes. One credit control area contains credit control
information for each customer.
Use
Credit and risk management takes place in the credit control area. According to your corporate
requirements, you can implement credit management that is centralized, decentralized, or
somewhere in between.
For example, if your credit management is centralized, you can define one credit control
area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you
can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level.
You set up credit control areas and other data related to credit management in Customizing for
Financial Accounting. For more information, see the Implementation Guide under Enterprise
Structure Definition or Assignment Financial Accounting and then Maintain credit control
area. You assign customers to specific credit control areas and specify the appropriate credit
limits in the customer master record. -
Sales order credit control area
Hi,
How can i identify the credit control area the sales order belongs to?
Is there any way to identify in the SO itself?
(not checking the sales org and checking the cc ar)Credit Control
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
16. Transaction OMO1
Which kind of update did you choose for structure S066?
In any case, "Synchronous update (1)" has to be chosen as the kind of update.
All other settings will lead to errors.
Credit Management
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
u2022 SM30 - Table/View
u2022 V_TVTW - Define Distribution Channel
u2022 V_TVTA_KKB - Assign sales area to credit control area
u2022 V_T014 - FI - Define Credit Control Area
u2022 T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022 Check Credit
o A - Credit limit check and warning message
o B - Credit limit check and error message (no sales order can be created)
o C - Credit limit check and delivery block (block delivery if hit credit limit)
Options B and C -> used for checking open order values (when you create/change the sales order)
o D - Automatic credit control with open order values
More control in transaction OVA8 - Automatic credit control
You check for open orders and deliveries, or just open deliveries.
or open order values with other options
u2022 Credit group
o Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022 whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022 Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022 SAP default credit groups
o 01 - credit group for sales order
o 02 - credit group for delivery
o 03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items you can have the followings credit limit check:-
u2022 Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022 Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.Max open items %
The customer balance must not exceed a certain percentage.
u2022 Oldest open items
If you donu2019t want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022 Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022 Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.You can use the u201CNextReview dateu201D and u201CNumber of daysu201D fields and combined it with the u201CLast int.reviewu201D field in customer credit master u201CStatusu201D view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
Releasing the Credit Block
These are the three transaction code you can used for releasing the SAP credit management block.
VKM3 - Sales Order
VKM5 - Delivery Order
VKM4 - Both Sales Order and Delivery Order
There are basically two types of customers:
1)Credit worthy
2)Normal customers
Coming to credit worthy customers these customers we can believe and we will give some credit ness for them.For such a type of customers we are going to set them some credit limit.Based on that we will give service to them till that limit.It the limit crosses we will get the messages while creating orders for them.
Their credit limit can be set in FD32 T.Code.
Automatic credit check will be maintained in OVA8
Follow these steps:
1. Go to IMG - enterprise structure - definition - financial accounting - define credit control area.
2. Assignment of company code to credit control area & sales area to credit control area.
3. Go to OVAK select ur sales document type and in the check credit column choose from A B or C. D is for automatic credit control for which you have to maintain the credit group and risk categories.
4. In FD32 you select your customer and click on STATUS icon and press enter. here u maintain the credit amount allowed. but this is done by the Finance people.
5. Now when you create the sales order and if the amount exceeds the credit limit then u will get the message as you maintained in the TC OVAK. Normally the system starts doing credit checks from the second sales.
order.
What are the different types of credit checks?
By Sunilmadho
Credit Check can be :
1) Simple Credit Check
2) Automatic Credit Control
Automatic Credit Control can be at various levels :
1) Order
2) Delivery
3) Goods Issue
Automatic Credit Check is of many types :
1) Static
2) Dynamic
3) MaximumDocument Value
4) Maximum Open Items in percentage
5) Oldest Open Item in number of days
6) Crtitical fields change
7) Highest dunning level, etc.
You can create more.
Credit Check happens only in SD module, never in FI. Because the stage of the check is in the sales cycle, which exists in SD. FI guys will check the credit master sheets of the customer, the MIS, the analysis etc, review the credit limits of customers. But the check will happen only in SD, while creating order, delivery or doing the goods issue.
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
u2022 V_TVTW - Define Distribution Channel
u2022 V_TVTA_KKB - Assign sales area to credit control area
u2022 V_T014 - FI - Define Credit Control Area
u2022 T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022 Check Credit
o A - Credit limit check and warning message
o B - Credit limit check and error message (no sales order can be created)
o C - Credit limit check and delivery block (block delivery if hit credit limit)
Options B and C -> used for checking open order values (when you create/change the sales order)
o D - Automatic credit control with open order values
More control in transaction OVA8 - Automatic credit control
You check for open orders and deliveries, or just open deliveries.
or open order values with other options
u2022 Credit group
o Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022 whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022 Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022 SAP default credit groups
o 01 - credit group for sales order
o 02 - credit group for delivery
o 03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items
You can have the followings credit limit check :-
u2022 Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022 Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
u2022 Oldest open items
If you don't want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022 Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022 Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the "NextReview date" and "Number of days" fields and combined it with the "Last int.review" field in customer credit master "Status" view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
In credit mgmt how the Amount & limit can be can be configured at sales order,delivery & PGI Level.
Please give me the solution .
1)First create Credit control area
Path:IMG\ES\Definition\FA\Define Credit Control Area
2) Assign your credit control area to your company code
Path:IMG\ES\Assignment\FA\Assign Company code Credit Control Area
3) And enter the credit limit using above mentioned transaction code FD32.
4) And assign this credit control area in your customer master Sales Org Data (XD02)
5)if you have maintained the credit control area for your customer then goto T.Code FD32.
6)Enter your customer number and the credit control area.
7)Select the status tab.Press enter.
8)Maintain the credit limit in the field.Save.
9)Go to OVA8 T.Code and then click on open orde -
Hi mates,
I need to create a new Credit control Area and then assign it to a Sales Division.
Can you provide the steps I need to perform in IMG ?
Thanks for your help in advance
RogerHi Roger
For creation of CC area u can use the following menu:
SPROIMGEnterprise structureFinancial accounting-Define credit control area
For assigning Credit control area to sales area follow thw menu path:
SPROIMGEnterprise structureassignmentsales and distribution--assign sales area to credit control area.
Regards
Aravind
Assign points if useful
Maybe you are looking for
-
Format issue in opening an XLS attachment sent through email by ABAP2XLSX
I have downloaded the ABAP2XLSX nuggets and tried to send an attachment in the email using the SAP. But when opening the attachment it is giving up an format issue and not able to view the content. I am able to save the XLSX file on the PC and able t
-
Hello i have a problem with a power mac that i just upgraded. I have put Mac os 10.2 on it and after the computer restarted. I got the apple and then it had a one of those dont enter symbols a O with a slash. so if any one knows what this mean would
-
Dash board and app store in the same window
And I cant use either.. Untill I deleted all the wigets and then I could use the app store... How do I get the app store to launch seperatly from my dash board in Lion..
-
HP Laptop not able to connect to internet thru airport
I just got a new Airport Express for my Mac... I cannot get my roomates HP Laptop to connect to the internet... It seems like it has found the network I made, and connects, but won't connect to the internet... I've tried everything I can think of...
-
How do I sync in photoshop cs6
My pix are RAW. When I open them they go into camera raw. Open again and they go into regular ps/cs6. Do I have to get them into Bridge in order to sync them ? Don't know how to do this. How do I SYNC several pix that I want to color correct at the