Restricting Authorisations for different controlling areas

Hi SAP Gurus,
I am facing a problem in restricting authorisations for CO Transactions in different controlling ares. We have a new controlling area started recently. But the CO user in this new controlling area is able to create master data in a differnt controlling area (i.e. the old existing controlling area). we have already maintained the new controlling area as org. unit for the relevant company code.
Giving below an example.
For t.code KAH1 & KAH2, we have maintained authorization object K_CCA for New Cont Area with Cost Center group X (Where X is standard hierarchy). Even after that user is able to make changes in KAH2 for another controlling area. We also tried to put value of profit centers instead of "*". This too is not helping.
Similarly the user is able to create master data in Tr. Codes KO01 / 02, KE51 / 52, KCH2 etc where this user in new controlling area is able to create / change master data from exising old controlling area.
Can anyone help me please ?
Thanks.

Dear Prasad,
Create a new Role using T Code PFCG and assign the new controlling area and the other relevant
details and you can assign it to the users.
I think in your case that particular user is assigned many roles where he has got * value and its allowing
to make changes on some other controlling area.
Regards
Mangalraj.S

Similar Messages

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Inter company postings between 2 different controlling areas

Dear Team,
Is it possible the inter-company postings between two different controlling areas company codes with same chart of accounts?
profit center accounting and New GL is activated for the company codes.
Please provide me the inputs if anybody gone through the above scenario.
Regards,
Ravi

Hi Hrusikesh,
Thanks for your inputs, but when i try to post inter company posting between two different company codes assigned to two different controlling areas through F-02. I am getting the below profit center error is coming.
Profit center aaaa/1234 does not exist for 11.04.2014
Message no. KM700
Diagnosis
The profit center does not exist in master data table CEPC for the date specified.
Procedure
Check your entry. If necessary, you must create the profit center for the date required.
Is it possible the IC postings between two different company codes assigned to two different controlling areas?
how we can meet the above requirement, please let me know if any one of you follow the above scenario.
Regards,
Ravi

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Prcessing KEU5 transaction for multilple controlling areas in parallel

Hi,
I have executed KUE5 transaction with an assessment cycle for a controlling area and when i try to execute the same transaction with an assessment cycle for another controlling area in parallel, there is an error message 'Cycle YOCETEST2 01.02.2008 cannot be started because run group 0000 is locked'.
Please provide me a solution to execute the assessment cycles for multiple controlling areas in parallel.
Regards,
Satish.

Hello,
Are you able to solve this? I am getting this error sometimes when the transaction KSV5 fails.
Please let me know.
Thanks,
Rushi

Different number range for different sales area but same order type

i have 2 different sales area but i have assigned same sales order type for 2 different sales area,
but i need the number range different for different sales area for that same sales doc type,
is that there is any user exists for number range? if so how can i find the user exists

Hi,
You can surely have a different number range per Sales Area. For this you will have to make use of a User Exit (which would surpass the standard SAP functionality). Try USEREXIT_NUMBER_RANGE.
Maintain the desired range in VN01 with the respective Range Keys.
Make a custom table comprising of Sales Area and Number Range keys (same keys which you maintained in VN01).
Now everytime, the system will check which sales area is used and accordingly, it will fetch the Number Range Key~Sales Area combination from the custom table, and will pick up the number range from VN01.
Coding should done by a good technical guy to make this work nicely.
Hope this helps you.
Regards,
Vivek

How can I restrict maintaining the same customer for different CC Areas?

Hi All,
I have a problem about maintaining customer credit limits via tcode FD32.
User can maintain a customer in different credit control areas (CCA) and these CCAs are belong to different company codes.
How can i restrict the user not to update another countries' credit limit?
Your fast reply will be highly appreciated.
Regards,
Bilal

Hi,
I donu2019t think so there is any configuration for this kind of purpose.
You can only do by the authorisation.
Just give the user authorisation that only this person can change the value of the credit control area.
And I think so that will be usefull also because if every body has authority then any body can change the limit which is not good.
First they have to take permission from the authorised person and if he approved then only he should change limits.
So just try out the user authorisation for your purpose.
Regards
Raj.

Different fiscal variant for same controlling area

Hi,
as my client requirement is having 3 company codes two having same fiscal year variant another having different fiscal year for legal requirement operating under same same county.
i have maintain all the setting for the 3 company codes but .
but when i enter to maintain controlling area OKKP.
system is throwing following error.
Differing fiscal year variants: V3 - ZP
Message no. KT297
Diagnosis
Fiscal year variant V3, controlling area SQRE, does not agree with fiscal year variant ZP, company code 3000.
The following entries must agree:
u2022 Same number of posting periods (the number of special periods may vary)
u2022 Same period limits
Procedure
Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.
Please suggest me how to proceed further in this case.
thanks
kareem

Hi Kareem
What you are doing is not correct
All comp codes under the Contrr Area must have same FYV and same Ch of accounts
1. Go to IMG and assign same FYV to the 3rd comp code
2. Go to IMG > FI (New) > Global Settings > Ledgers > Define and Activate Non-Leading Ledgers
Here, activate parallel ledger for this 3rd comp code and assign the other FYV in the parallel ledger
Also maintain the Doc No ranges for parallel ledger because your FYV will be different between Main and Parallel ledger
br, Ajay M

Same operating concern for multiple controlling area

Dear all,
We have a senario in which multiple controlling area is defined with multiple currency. Is it feasible to use same operating concern or different.
Thanks & Regards,
Vishal

Hi
As long as the Fiscal Yr Variant is same between the two, you can use same Op Concern
I dont think the above reply is valid because in my opinion, there is no restriction with regards to Currency
br, Ajay M

GR/IR Automatic Clearing for Different Business areas items

Hello All,
we have different business areas, and some times we create a PO for all business areas and invoice it in a specific business area
in F.13 automatic clearing:
for GR/IR account
Documents with different business area cannot be cleared.
any idea to solve this issue is appreciated,

Thanks for your reply,
I've tried such a solution with more parameters ( EBELN, XREF3 and EBELP)
but in F.13 :
- the document cannot be cleared when >>> selecting GR/IR account special process.
if we treat GR account as a normal GL account, I mean without selecting GR/IR account special process.
the document can be clear
i want to be able to clear the document with selecting GR/IR field ( is it possible )
and if it is not allowed, do we will face a problem by clearing GR account without selecting GR/IR parameter ??
Many Thanks

How could i Integrate (merge) 2 different Controlling areas into one?

Hello gurus,
The client i am working for had defined, from the beggining (during SAP Implementation), one Controlling area for the entire company.
This definition was correctly done, as a way to centralize every operation and transaccion made.
After some years, this company merge with another one, that had the same implemented controlling model, but asociated to another Controlling area.
The problem is that we need to integrate both Controlling areas into one, in other words, every operation saved or transaction made linked to the new Controlling area (the one of the second company), must be converted to the code of the original one.
Is there an std. way to erase the second Controlling area and asociate all its records (saved in every table) to the orignal one, as if they were one from the very beggining?
Thanks very much!.
Pablo.-
Edited by: Pablo Lanzani on Jul 2, 2008 7:51 PM

Hi Daniela, thanks to you too.
If you or anybody have some specific documentation about 'SLO -- SAP Organizational Structure Changes -- Controlling area Merge' to send me while i continue looking, i will be pleased.
Thanks a lot anyway!
Pablo.-

Same IO or WBS to be used in Different Controlling Area ? Is this possible

I have a Internal Order say, 10001 of Controlling Area : AAA, in Co code : ABC.
Can i use the same Internal Order, in Controlling Area : BBB, in code code : XYZ ???
Pl. reply
thanks
amit

Hi,
Numbers of WBS/IO have to be unique through the client (not like cost centres, which could be defined in different CO areas with the same code).
Regards,
Eli

Different Transaction Types for Different Depreciation Areas

Dear Friends,
When I am viewing the asset explorer for the asset, it is oberved that for book derpreciation 01, the asset transaction type "acquisition value" is updated and am able to view the same.
However when I am going through the tax depreciation area, the transaction type intercompany transfer" got updated and the acquisition values are not updated.
I would like know the reason of how the system is going to update different transaction types in different depreciation areas since the postings only takes effect in book depreciation and same should be diplayed for tax depreciation.
Thanks in advance!

hi
go to OAYA
select "Limit Transaction Types to Depreciation Areas"
select the trnsaction type you using .
select depreciation area specification
and maintain entries for every dep area you want to maintain for transaction type.
regards

Different Asset value dates for different depreciation areas

Hi All
I have a requirement for different capitalization dates in different depreciation areas for some LATAM countries .How can this be achieved?

Hi
Hope you can achive this requirement by entering Depreciation calculation start date in depreciation area tab of asset master against each depreciation area
Depreciation calculation start date
'As a general rule, the system determines the depreciation start date from the asset value date of the first acquisition posting. However, you can also manually enter a calendar date in the asset master record for the start of depreciation. In that case, the system ignores the asset value date of the acquisition posting.'
Please check different scenarios in development system and then do it
Regards
Praveen PC

Accounts for different depreciation areas

Hello all!
I have the following question:
In our company there are 3 depreciation areas for assets. And my problem is that when I try to look through the accounts in depr.areas, I see the same accounts in all areas as in main one. But the account should be different in accordance to AO90 and dep. areas. When I run ASKBN to provide postings in GL, my accounts in AW01N for areas are not changed - Debit and Credit are the same for all.
I expected t see different account for different areas, Could I get it and how???
Thanks in advance!

Hi,
Is your all 3 dep areas will post to GL?
Thanks,
Srinu

Restricting Authorisations for different controlling areas

Similar Messages

Maybe you are looking for