No view of the changes of Customer /Vendor master data

Hi Experts,
I have a problem, when I run the standard report to view the changes of customer/vendor master data, I don't find the change relative to a bank account .
I found in the report the technical field that the user has changed, but I haven't found the text of the data in the tab "bank account".
Can you help me, please?
Thanks in advance.
Best regards
Giampaolo

Dear Ram,
thank you for your answer , but my problem is still present. If I want to see the modify of the Customer/Vendor Master Data  for the Payment transaction Data  details, I don't try this information in the TCODE FD04.
Do you know a different report or TCODE that I can use?
Thank you in advance.
Best Regards
Giampaolo

Similar Messages

  • Address Change in Customer/Vendor Master upon creation or change Master

    Hi Expert,
    We need to change some Address  fields( *ADR6-SMTP_ADDR , ADRC-DEFLT_COMM, KNA1-TELTX, KNA1-TELX1*) in Customer Master based on some condition while creation/change the Master Data. I need to do same fields in Vendor Master as well. 
    I tried all the Possible exit Here.
    If you know a Proper exit /BADI or one possible solution to solve my problem?
    If anyone can provide any BAPI name which is used to Modify any customer/Vendor address will be very much helpful as well.
    Thanks in Advance for your help.
    Suman Adhikari

    Hi Kesav,
    For customer  BAPI_"CUSTOMER_CHANGEFROMDATA" and "BAPI_CUSTOMER_CHANGEFROMDATA1" both Sales Organization is a required filed. Here we need to change some fileds(standard communication filed , Customer Email address, and Telex No)  based on telex filed of customer for Customer irrespective of Sales Organization or any other constraints. The same requirement is for Vendor as well. If there is any proper exit/badi where KNA1 and address structure ADRC,ADR6 etc are available that will we good.
    I just need to modify some address fields for customer as well as vendor. If there is any BAPI for change address(customer/Vendor) then that will also be helpful.
    Suman Adhikari

  • How to transfer changes in my Vendor Master Data ? (currency)

    Hello everybody,
    I replicated my vendors with bbpgetvd and everything was fine.    Now, my vendor master data  has changed, some vendors were modified in their currency field.   
    If I run again the transaction "bbpgetvd", the program doesnt identify these changes  =(
    What can I do in order to update this data ?
    Thanks and regards,
    Diego

    Hi guys,
    Thanks so much for your help !  I tried bbpupdvd and it worked fine !  
    thank you !!!
    Regards from Mexico,
    Diego

  • Change Pointers for Vendor Master

    Hi All,
    I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
    1. An Idoc will be generated for newly created vendor, right?
    2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
    3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
    Thanks & Best Regards,
    Kumar.

    >
    Sivapuram Phani Kumar wrote:
    > Hi All,
    >
    > I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
    >
    > 1. An Idoc will be generated for newly created vendor, right?
    > 2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
    > 3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
    >
    > Thanks & Best Regards,
    > Kumar.
    Hi,
    1. Afer doing all the settings required to create change pointers (BD61, BD50, BD52), the idocs will be created when u run the report RBDMIDOC or execute transaction BD21.if any changes happen in master data
    like new vendor is created or vendor data is changed, then only change pointers will be created and on executing the aforesaid report, idocs will be generated.
    Also idocs can be generated by replicating vendor data through transaction BD14 or any other custom transaction.
    2. When you add custom segments to basic type, you have to write code in suitable user exits.
    Identify suitable user exit to populate data in custom segments and write the code in oubound side.
    Identify suitable user exit to populate the values in custom segments to database table, this code is to be written in inbound side.
    Regards
    Vinod

  • Vendor master data changes

    Hi all,
    Please help me with some useful information regarding the history of master data creationa and changes. I need to create a query for creation and changes of vendor master data. Data for creation of the vendor master data are saved in LFA1 but for changes I cannot find table.
    Thank you,
    Desimira

    Hi,
    You can use the standard report for Vendor master data changes, S_ALR_87012089 - Display Changes to Vendors.
    Regards,
    SAPFICO

  • Issue with Vendor Master Data-field notes ID  (Table ADRT-REMARK)

    Hello,
    I have a issue related to Vendor Master Data maintenance.
    The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
    Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
    The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
    Also please note that CATT/e CATT is not permitted at all the client level.
    Can any body suggest the way to change the master data through some way.
    Regards,
    Chepan

    Hi,
    Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP  like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
    If you have any questions I try to help you?
    Best regards,
    Piotr
    Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

  • Missing "Mapping entry" issue in tranferring Cust/Vendor Master Data

    Hi All,
    We are doing a version upgrade in one of our client for SCM APO (SCM 7.0 SPS 8). We are getting an error while transferring customer/ vendor master data (either in foreground or background) that "No location XXXXXXXX exists for mapping entry XXXXXXX of category 1011 (1010 in case of customer).
    Please provide your valuable help to resolve this issue.
    Thanks.

    Dear Ravi.
    Please use the report ZMATMAP_REORG provided in note 859650 to remove the inconsistencies between /SAPAPO/LOCMAP and /SAPAPO/LOC.
    The number of entries in these both tables should be the same.
    I am not aware of your SCM Release, but it is also relevant for release 4.1, despite the info in the note.Please copy the report in your system and execute it firstly in the test mode.
    I hope this helps you!
    Let me know the outcome of the issue.
    Thank you!
    Will

  • Creation of Vendor Master Data

    Hi,
    In my company they are currently using this process to create Vendor Master Data: The Vendor Master Data is created in the Production Server and refreshed to Development Server and to Quality Server, using ALE.
    Is this the right process? If not can you let me know the steps to create Vendor Master Data.
    regards,
    raj

    Hi Raj,
    ALE and IDoc is the best way to transfer master data between SAP system. They have excellent error handling and reprocessing capabilities (Recommended by SAP).
    In order to automate the vendor master data transfer, you need to do the following steps.
    1. Create Logical System (if not available) for PROD, QA and DEV system.
    2. Create RFC Destination (SM59) from PROD to QA and DEV system.
    3. Create Distribution Model from PROD to QA/DEV (BD64) for message type CREMAS (Vendor Master).  
    4. Create Partner Profile (WE20) for message type CREMAS in PROD, QA and DEV system.
    5. Execute transaction code BD14 (Send Vendor) from PROD to QA and DEV system.
    6. To monitor the IDoc, you can use transaction code WE02.
    If you are not familiar with ALE/IDoc setup, please work with technical folk.
    Hope this will help and give an idea.
    Regards,
    Ferry Lianto

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • Alternate address in vendor master data

    Hi,
    I have an requirment to maintain the Alternate address in vendor master data.
    My client is having requirement that the vendor must be same but may be situated in two different locations so they wants to maintain two addresses in vendor master.
    If we maintain parner functions then we have to create an additional master data of vendor which is not accepting by the client and they want to create only one vendor with two different addresses.
    Can any one please suggest me how to maintain alternate address in vendor master? as i could not able to see any alternate address fields in vendor master data.
    Best Regards, Abdul

    Hi Chakrapani,
    In that case if we use parner function we have to create addtitional mater data right? please find the below schenario.
    I have vendor number "X" where as an invoicing party I created vendor "A" which I maintained as parner function of invoicing party with different address.
    If invoice generated on which vendor account this invoice will reflect? if it in "X" or in "A".
    If the invoice open item creates in vendor account number "X" then it would be fine with me, also if possible please let me know how to configure the partner functions and the functionality in this case.
    Many thanks in advance.
    Best Regards, Abdul

  • Can we use idoc technique to change or delete the vendor master data?

    Hi,gurus,
    Can we use idoc technique to change or delete the vendor master data?You know we can create vendor data using idoc CREMAS03 as the receiver adapter,but when change or delete the specified vendor data,must we use RFC adapter technique?
    Another question:I found the bapi which creates a vendor master data doesn't have the parameter account group,then we turned to idoc technique.But which adapter should I use when change or delete the vendor data?
    Thanks in advance.

    Hi,
    >>>I found the field of the segment of deletion flag at different level,and very appreaciate your help.
    yes - LOEVM  - but remember this will not delete the record but only mark it for deletion
    >>>It's a long time to wait for your new blog,what new and interesting things do you find?
    at least 4 new in my head - 2 simple but important and 2 new + I'd also like to write something for XI guys about
    BO data integrator which can also work as EAI tool (BTW I know it's ETL) but how knows when they will appear
    Regards,
    Michal Krawczyk

  • Customer and Vendor Master Data.

    Hi,
    Can any body plz tell me how the customer and vendor master data created in real time implementation and the master data's are created by FI CO consultants.
    And plz. tell me the procedure
    Thank you

    Hi
    In Real Time Master Data team will look into Creation of the Master data.This will be as same as how you create in a training class.For every external party with whom we do business must be created as a Vendor or a Customer.The system offers seperate functions for maintaining Customer Master Records and Vendor Master Records depending on the requirements of your Organization.
    A Complete Customer Account consists of General Data at the Client Level , Company Code Segment and Sales Area Segment.These Data records can be maintained Centrally for all areas or seperately for Financial Accounting and Sales and Distribution.
    A Complete Vendor Account consists of General Data at the Client Level , Company Code Segment and Purchase Organization Segment.Vendor Master Records can be maintained Centrally for all areas or seperately for Financial Accounting and Materials Management.
    Configuration of Creation of Vendor Master Data Centrally
    1.Creation of Vendor Account Groups with Screen Layout  -
    OBD3
    2.Define Screen Layout per Company Code -
    OB24
    3.Creation of Number Ranges for Vendor Account Groups -
    XKN1
    4.Assign Number Ranges to Vendor Account Groups -
    OBAS
    5.Define Tolerance Groups for Vendors and Customers -
    OBA3
    6.Creation of Vendor Master Data Centrally -
    XK01
    7.Define Document types and Number Ranges(KR,KZ,KA,KG) -
    OBA7
    Configuration of Creation of Customer Master Data Centrally
    1.Creation of Customer Account Groups with Screen Layout  -
    OBD2
    2.Define Screen Layout per Company Code -
    OB21
    3.Creation of Number Ranges for Customer Account Groups -
    XDN1
    4.Assign Number Ranges to Customer Account Groups -
    OBAR
    5.Creation of Customer Master Data Centrally -
    XD01
    6.Define Document types and Number Ranges(DR,DZ,DA,DG) -
    OBA7
    Creation in FI point of view.
    Vendor Master Data -
    FK01
    Customer Master Data -
    FD01
    Creation in SD point of view.
    Vendor Master Data -
    VK01
    Customer Master Data -
    VD01
    Creation in MM point of view.
    Vendor Master Data -
    MK01
    Customer Master Data -
    MD01
    Regards
    Venkat

  • What the setting required in vendor master for Intercompany or intracompany

    What the setting required in vendor master for Intercompany or intracompany orders
    Thanks,
    Kiran

    Hi,
    For the inter company STO scenario
    Create a vendor for the company code of receiving plant, using account group :0007 Assign this vendor to Delivering plant
    in the Purchasing view>Extras>Add. Purchasing data>Plant.
    Also create an internal customer for the supplying sales area and assign it to the vendor, it helps in determining the Shipping point.

  • Need badi which triggers immediately after saving the vendor master data

    Hi all.
        I need a badi which triggers after vendor master (xk02) is changed . The badi should trigger after the data base commit ( i.e after all the changes have been stored in data base tables). Pls let me know
    Thans in advance.

    try these:
    EXIT_SAPLV45T_001       V45T0001     Customer exits text determination
    EXIT_SAPMF02D_001     SAPMF02D     User exits: Customer master data
    EXIT_SAPMF02K_001     SAPMF02K     User exits: Vendor master data
    EXIT_SAPMV45A_002     V45A0002     Predefine sold-to party in sales document
    EXIT_SAPMV45A_003     V45A0003     Collector for customer function modulpool MV45A
    EXIT_SAPMV45A_004     V45A0003     Collector for customer function modulpool MV45A
    BADI's:
    CUSTOMER_ADD_DATA     CUSTOMER_ADD_DATA     Additional Data at Customers
    CUSTOMER_ADD_DATA_CS     CUSTOMER_ADD_DATA_CS     Additional Data at Customers (Subscreen Container 4000)
    VENDOR_ADD_DATA     VENDOR_ADD_DATA     Additional Vendor Data
    VENDOR_ADD_DATA_CS     VENDOR_ADD_DATA_CS     Additional Data for Vendors (Subscreen 4000)

  • How to create automatic creation of BP from customer and vendor master data

    Hi gurus,
    can any one tell how to create automatic creation of BP from customer and vendor master data.
    Please give me the steps.
    Thanks
    Sasikanth.

    HI,
    Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
    Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
    rgds,
    Srini

Maybe you are looking for