No-zero output to the output in a file

how to suppress no-zero output to a file?

hi
good
You can use the folowing FM for converting the Spool to PDF
CONVERT_ABAPSPOOLJOB_2_PDF
CONVERT_OTFSPOOLJOB_2_PDF
If not you can get the Tempse id of the spool and use the FM
RSTS_OPEN_RB
RSTS_READ
This will give you the contents of the spool. Tempse object for the Spool can be found in the Spool Request Header
Hope this will help you to solve your problem.
Thanks
mrutyun^

Similar Messages

Make the output of the BI report rtf file some fields non editable

Hello All,
I want to make some fields in the output of the BI report as editable and some non editable. Any output format is fine (PDF, RTF or HTML) Please let me know if anyone knows how to do it.
Thanks in advance..
Anu

You can add RTF to active allowed output type list (provided that your reporting system supports it) by going to CustomerReportExtensions.xml file and adding the following node right after ParameterTypes node:
<ActiveReportOutputTypes configChildKey="key">
<ActiveReportOutputType key="RTF" value="RTF" extension=".rtf"/>
</ActiveReportOutputTypes>

Configuration EDI output - Delaying the output by specific amount of time

Hi,
I am trying to delay EDI output when it is generated by 1 min exactly before the IDOC leaves SAP to go to Business Connector. I would like some notes or step by step guide on how to do it. Which program requires change?
We tried to change NACE, output type definitions and we changed ZFNDTIM accommodate but it didn't work.
Thanks heaps,
Robin/Anna

what about to generate it scheduling the program RSNAST00 every minute with the idoc message condition type ?
reward if helpful
regards
Roberto

Video output half the quality of source files

I don't understand why this isn't working...
I have a video project in which I've imported high quality video files (1280x1024 screen capture, AVI). I've made sure that my sequence settings match the same dimensions as the source clips and that compression is set to "None." The clip settings can't be modified, and there's no pop-up when I import a clip to the timeline asking if I want to change my sequence settings. I do have to render, though.
When I preview the source video it looks great, but in the canvas it looks like it's at half the quality. The render comes out the same - horrible quality, despite being the right dimensions.
What could I possibly have missed?!? This has me totally stumped.

This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Andy
(PS - Natively means in the format the camera shot it in).

Output of the program

Hi,
I wrote a program to retrieve data from three different master data tables but not getting the desired output. The output comes all in zeroes.
Can anyone tell me where am I going wrong?
Here is the code-
REPORT ZREPORT1 .
Tables: PA0002, PA0008, PA0015.
data : begin of itab occurs 0,
CLIENTNO LIKE PA0002-MANDT,
ENAME TYPE PA0002-CNAME,
ESAL TYPE PA0008-ANSAL,
OT TYPE PA0015-BETRG,
ENO LIKE PA0002-PERNR,
END OF ITAB.
SELECT A~CNAME
A~PERNR
A~MANDT
B~ANSAL
B~PERNR
C~BETRG
C~PERNR
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( PA0002 AS A INNER JOIN PA0008 AS B
ON APERNR = BPERNR )
INNER JOIN PA0015 AS C
ON BPERNR = CPERNR
WHERE A~MANDT = 800.
LOOP AT itab.
WRITE: / ITAB-CLIENTNO, 25 ITAB-ESAL ,45 ITAB-OT.
ENDLOOP.

Hi ,
u have to put like this .
SELECT A~CNAME
A~PERNR
A~MANDT as clientNo
B~ANSAL as esal
B~PERNR
C~BETRG as OT
C~PERNR
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( PA0002 AS A INNER JOIN PA0008 AS B
ON APERNR = BPERNR )
INNER JOIN PA0015 AS C
ON BPERNR = CPERNR
WHERE A~MANDT = 800.
LOOP AT itab.
WRITE: / ITAB-CLIENTNO, 25 ITAB-ESAL ,45 ITAB-OT.
ENDLOOP.
Regards
Prabhu

The billing document has incorrect gross weight on the output

Hi All,
I'm facing a problem - the billing document has the incorrect gross weight on the output.
The output of gross weight is 3 x the true gross weight.
The program was looping three time during this select causing the value in t_weights-brgew to be 3 times the true value.
Could someone advise how to resolve this problem?
Below is part of the program for gross weight.
REFRESH t_weights.
SELECT vekp~brgew INTO t_weights-brgew
 FROM vekp JOIN vepo ON vekpvenum EQ vepovenum
 WHERE vepo~vbeln = w_vbeln
 AND vepo~matnr = w_matnr.
 COLLECT t_weights.
ENDSELECT.
IF NOT t_weights[] IS INITIAL.
 READ TABLE t_weights INDEX 1.
 READ TABLE out_tab WITH KEY name = 'BRGEW'.
 IF sy-subrc = 0.
 move t_weights-brgew TO out_tab-value.
 MOVE t_weights-brgew TO w_gross.
 MOVE w_gross TO out_tab-value.
 WRITE w_gross TO out_tab-value LEFT-JUSTIFIED NO-ZERO DECIMALS 2.
 MODIFY out_tab INDEX sy-tabix.
 ENDIF.
ENDIF.
ENDFORM. " of get_nett_gross_weights
Thank you.

What is the Structure of the t_weights.
This may happen due to that condition in select stament, there might be more record for it, so it will add twice or thrice especially due to the JOIN/INNER JOIN statements,
Try SELECT DISTINCT <..followed by your same code...>

How we can get the output in excel format for Spawned programs?

My requirement is to get the excel output for some of the programs (like -Adjustment Register, Applied Receipts Register). I am trying to achieve this by BI Publisher. But these programs has "Spawned" executable. And when I am changing the output type as"XML" I am getting below error in output-
"XML Parsing Error: syntax error"
Can anyne suggest how we can get an XML output and then excel output for Spawned programs?
Thanks in advance,

Hi,
If I get it right, you want to convert RXi (Reports Exchange) reports such as Adjustment Register & Applied Receipts Register into XML Publisher. Normally, you need to change the "Output Format" of the program called by the "Spawned" program to 'XML' -- not the "Spawned" program itself.
However, I believe RXi reports does not support XML output (atleast in 11i). It could only work on Text & Html format. Check on the metalink note below:
432719.1 - RXi-Only Reports Generate XML Format Exception With No Output Setting the Output Format to XML
Hope this helps.
regards,..
Rownald

Settings to trigger output at the time of PGI in shipment

Dear Friends,
I have a requirement where an output has to be triggered from the shipment document (VT02N), when the post goods issue is completed.i.e when the user completes the "shipment start" stage in the shipment document.
The output document has to be sent by email to a couple of users when PGI is completed in the shipment.
Since,here we are not manually triggering the output, instead the output is triggerred automatically when PGI is done.
Please let me know the settings to trigger a particular output when PGI is done.
Waiting for valubale feedback.
Regards,
Sampath

Hello,
You can do this through Configuration.
LE>Transportation> Shipments >Define and assign activity profile
With reference to shipment type you have 7 status available. In your case Shipment begin stage you can Set PGI and Output trigger by creating variant.
All you have to do is put the mouse on the "at shipment begin" and select maintain and you can see the PGI option and output fields where you can call the output type there.
try it will work....
tkreddy
Edited by: Tkreddy on Nov 10, 2009 3:00 AM

Problem with the Output Type and Transaction ME9F

Hi,
 I have an Output Type (xyz) and Program (abc).
 If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
 Printout.
 If for ME9F i give the output type ( pqr) then am able to get the Spool and
 Printout.
 Problem is :---
 when am using O/P Type ( xyz ) for ME9F then am abel to process but am
 not able to get the spool and not even printout.
 I want to know where it can be wrong.
 It's a high priority object.
Kindly help me out.
Thanks,
Zia.

hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r entries (xyz) and (pqr) are having medium 1.
if its missing then assign it ..
regards,
VIjay

Different Output of the template from Template Builder and Oracle Apps.

Hi,
I have created a template with a page layout of 11" X 17" this template has around 18 columns.
When i load the XML data and run it from XML Template builder 5.6.2 the output is fine but when I run it through oracle applications i get different output basically the output from oracle applications comes in 7 pages (First page has half page output , 2 nd page has 3/4th page output.....) where as from XML template builder the output comes in 6 Full pages.
Wher am i going wrong.
Thanks in Advance.

The output is in PDF format.

Making the font in the output window bigger

You know when you run a console application and you're looking at the output in the output window at the bottom, the typeface is a little small. Is there a way to change that to a bigger font?

I don't think there is a way to make just the font in the log window bigger - but you can increase the size of the font used in JDeveloper by editing the ide.properties file.

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

Capturing all the text that I output to the console

HOw do I capture all the text I output to the console to a file. I know how to open filebuffers and all that, well I don't really know, but I have some sample code that I can follow. I am just wondering if I am suppose to just open the file buffer, then run my normal application with all the system.out.println() statements and then have that fed to a file? Right now I am using a lot of println() statements to debug, and I would like to be able to push it into a file so I can look at it later, without having that console line limitation.
My guess is to just open up a filestream and have it open and then run my normal code and then close the filestream at the end. Can somebody let me know if that is good enough...
let say I have a static method hat outputs a bunch of text, can I do this
filestream open
static method run
filestream close
and that's it.

I could see why you'd want to automatically
route output to a file, that normally would
go to the console. There might be use for
capturing output lines.
If the question is to avoid having to specify
the output on the command line, then what
one can do is to create a ".bat" file.
Ex.
kstring.bat
======================================
@java kstring > kstring.out
Now in executing, you'd just ==> kstring
Which will execute the kstring.bat,
and since "> kstring.out " is inside
the "bat", your output goes to the
kstring.out, instead of the console.
This would be another way, saves all the
redirection in Java code. Just use the
DOS command inside a xxx.bat file.
Just my opinion, may not work in your
circumstance.
-- gte99te

Print Output at the time of rescheduling

Hi Friends,
When i reshedule the Orders in V_V2,I am getting printout puts for all the orders rescheduled,In Out put type Multiple Isuing is not ticked.When i normally change the sales order i am not getting output triggered,But when i reschedule i am getting prined outputs.
Can you please explain how to control outputs get printed at the time of rescheduling.
Thanks,
Sree.Manam

Have you maintained a program+routine for Change output on the output condition type? This is like a requirement routine that issues a change output when the code in the routine sets SY-SUBRC to 0. The Change output paramters are maintained in the General data tab of the output condition.

Error in generating HTML output using Central Output Pro Server 5.5

I am getting the following error while generating HTML output using the Output Pro Server. A new printer was created with the Physical Device as "HTML Template Generation - [html]" and added to the Job. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](1801) The printer name is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3015]Error, unable to open printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3008]Error, unable to get info about device 'PAYMENTADVICEHTM.html' attached to port '<nil>'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](183) Cannot create a file when that file already exists. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [2]Error opening output device/file 'PAYMENTADVICEHTM.html'. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](6) The handle is invalid. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3018]Error ending page on printer. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]Nothing was printed. 2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.

If I were to guess, I'd guess that your filename is invalid. How about removing all special characters (spaces, brackets, etc.) from the device name. Also, make sure your form was compiled for HTML.
I haven't actually used the HTML driver, but these are general things you should do if you have trouble with any Central driver.
Regards,
Rob McDougall
Indigo Pacific

No-zero output to the output in a file

Similar Messages

Maybe you are looking for