Nokia 500 - three main problems (deactivate Ovi, T...

Hello Community, there are three main problems with my new nokia 500 mobile (beside my really not good english for what I apologize at first!):
1. How can I deactivate this annoying prompt to ovi store at the startup? I do not do not do not want to go online!! This did already cost me some money because the „later“ button is too small too, so I pressed the wrong button or the link below the "later"-button. And so my mobile connected to internet faster than I could press the abort-key. What a nuisance!
2. I have no idea about the sorting criteria for the to-dos! To give an example:
9.3(.2012) A…
27.11(.2011) N…
28.11(.2011) K…
6.3(.2012) L..
As you can see – the to-dos are NOT sorted by name and NOT sorted by date. So, by what are they sorted? I can’t find it out! And is there possibility to sort them by name or by date?
3. As to the calendar: When I miss the alarm of a meeting/a to-do etc., there comes a list of all the missed alarms, but there the option „silence“ is no longer available. So I have to change date or time of a to-do/meeting etc. to get a new alarm. This ist annoying too!
Well, these are the main problems with my new mobile phone, I hope you find some answers for me! Thank you!

  Even on my E5 have the problem of signal loss by touching with the hand on the back. Brought into service twice. I ask Nokia, like the E71, a software update to correct the problem. 

Similar Messages

  • Nokia 500 video calling problem

    Hello Nokia..
    I had just bought Nokia 500 mobile.  As shown in advertisement & specificatio shown on website, there is 3g supported phone.  But lake is there is no video call feature. I spent around 10K for this phone but no video call feature. I know it has no front camera but I have 6233 3g phone. It has main camera only yet it support video calling and I already doing this.  Then why this option is not available with this phone. 
    I feel like cheated by nokia. 
    Can Nokia reply my thread with genuine reason and care like genuine customer.?

     The fact is you should have asked the question if the 500 was capable of video calling before you bought the phone. There is absolutely nothing anyone can help you with here and reading the specifications page makes no mention of video calling so that should have given you an idea that it's not supported.
     As I said in my previous post, this is a user to user forum so if you want a Nokia representative to answer your questions you can use the Contact support button at the top of the page.
    Ray. 

  • Nokia 500 wi-fi problem

    Hi all. My Nokia 500 can't find any wi-fi connection after Belle upgrade. It won't pass the "searching wi-fi network" message. Really don't know what to do since it should be a simple task. Any ideas?

    Hi weblira
    Welcome to Nokia forum! 
    Try doing a factory reset on your phone. Go to Menu > Settings > Phone > Phone management > Factory settings > Restore, if it will ask for a lock code use 12345 unless changed.
    After the factory reset try to connect to WLAN again. If that will not help you to resolve the issue use Nokia Suite to re-install the software of your phone.
    If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

  • Nokia 500 Belle Updating problem

    Hello,
    I've installed the latest version of Nokia Suite. It showed me Nokia Belle Demo and I installed but I cannot find Nokia Belle update. I'm currently using Anna version.
    Please help.

    Sorry for double posting but I forgot to say my current version
    Symbian Anna, 011.033.

  • After installing 10.5.2 - three main side effects!

    Hi all,
    After upgrading 10.5.2 and graphics update I am experiencing three main problems, and just one of them seems to be a reported bug as far as I know:
    1. *The black screen after going to sleep mode*. I found some threads in this forum and I have to check it out.
    2. what it seems to be a weird one: I can set brightness screen up, but when I shut down the system does not seem to keep track of this setting and *goes back to full brightness on start up*... it may seems a minor bug, but believe me, it is starting to be pretty annoying.
    3. When the computer is turned off, most of times if I plug it in (either to the wall socket or to the magsafe) *suddenly starts up by itself*.
    By the way, my laptop is a 2.4 MBP, and yes, I zapped PRAM many times and did not work.
    I hope you can help.
    Best regards,
    Antonio
    (Spain)

    a brody wrote:
    Sir Arthur Conan Doyle said:
    "How often have I said to you that when you have eliminated the impossible, whatever remains, however improbable, must be the truth?"
    Given the operating system updates are written the same for each similar computer system, and people with the exact same machines have had no problem whatsoever, does it not suggest there must be some contributing factor you have failed to consider? It would to me. That's what they teach in logic. And computers whether you like it or not are logical devices. They only work on zeros and ones. Either they do, or they don't work. The only way they can sometimes not work, while other times work is if some contributing factor of something which is unexpected creates a problem. What can that be? Given Apple's officially spec'ing these systems for a range of Macs, you would think that Apple has indeed tested with each of those spec'ed Macs as virgin systems. You can't possibly think that Apple has tested for all 24 thousand possible software packages in the space of time given, since even 64 software packages tested together offer more combinations of possible software packages than there are seconds in the age of the universe. So given logical possibilities, you must come to the conclusion you have tripped up one of those improbable combinations of software/hardware that Apple has not had a chance to test for yet, nor the third party developer. The update as an update is functional on a virgin system, and that's all you can ever expect it to be. It does not mean that the update is at fault for not being a working system. Apple clearly outlines what it expects of software developers here:
    http://developer.apple.com/
    If they don't follow those outlined steps to the letter, that's when you can run into problems.
    Data corruption which is also an operating system independent issue can also lead to problems.
    Let's not blame the operating system, and let's find the contributing factor causing the issue at hand.
    To say the truth, this is quite surprising... didn't you read about so many troubles after upgrade? many people has got the blank screen after sleep mode and many hasn't, and so on... even I have read about people doing downgrades and not experiencing those problems. In my case, everything started from the very moment I made the upgrade.
    I am not very experienced with Apple, but I've been dealing with computers since 20 years ago, I am an SAP principal consultant... and you tell me that the same software has to work in the same way with the same machine?
    I had a Burt Simpsons saying but.. maybe is not the time neither the place
    Thanks. but I will go to regular forums, they were always truly helpful.

  • Nokia 500 Problem with Tracking mode and touch sc...

    Hi,
    I just bought Nokia 500 and I am having lot of problem
    1. When I use navigator..it should be in tracking mode not in browing mode so I can see where i am going on where is the turn. But as soon as it calculate the route, withing few second it automatically comes in browsing mode. Even if I press back arrow on left bottom corner it again shows browsing mode. However, sometime it's working fine and always display tracking mode. I am not sure how to switch between the mode. As per manual, I need to hit the back arrow left bottom corner but that does not work for me.
    2. The second problem is really bad. The touchscreen response is slow. It looks like the processor is slow. Particularly if I go to Setup menu..it automatically goes to system. I just touch Setup on main menu and sometimes it automatically goes into system. If I manually go to system..it automatically goes to About ..menu. It just behaves randomly..I have done screen calibration many times. but still issue is there. Also, when I got to keyboard to enter address..it automatially press Q key. Not sure what's wrong here
    Anybody please suggest me what's wrong. Do I need to replace it with nokia?

    Hi
    Night mode is designed to work without flash. So either use flash or night mode, but not both.
    Cheers
    Gryff
    ------ N78 -------

  • Problem installing DivX codec on Nokia 500

    I have a nokia 500. I'm trying to install DivX codec to play HD Video files. But when I install DivX player, I can't go to main menu. The main menu turns down.
    Have anyone tried installing DivX codec or any other codec on nokia 500 to play HD Videos? Please help me. Please tell me which codec or player is fully supported by Nokia 500. I've searched a lot about players and codecs on nokia 500. But nothing found.
    I need to play High Quality AVI, MP4, MPG and FLV files. Please suggest me any player that supported by nokia 500.
    By the way, I'm using the latest Belle Refresh(111.021.0028) on my nokia 500.
    Thanks in advance.

    There is no graphics chip upon 500 which is responsible for such problems.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 500 Wi-Fi with problems (and other issues)

    Hi there.
    I had my Nokia 500 yesterday, but it seems to have several problems regarding wireless LAN. I usualy disable 3G traffic (WAP, GPRS, UMTS), so that my service provider doesn't charge me, and only enable with when necessary. But I want the phone to connect to known Wi-Fi networks when avaialable. However:
    1 - When I enable "Only WLAN" in my country, several phone applications constantly annoy me about "no avaialable connection", even when its connected to a Wi-Fi LAN!
    2 - Its constantly searching for wireless networks, and the Wi-Fi connection is intermitent. It fails and then it comes up all the time. I could not finish the download of a GPS map because the Wi-Fi would fail before the download could finish. And it only had 1 known Wi-Fi network avaialable.
    3 - So I set it to use only WLAN, I set  "WLAN energy saving" to off, "search networks" to "once in 30 minutes" (and not automatically), and Manual selecion of WLAN. Even like this, the WLAN connection sometimes fails, and then comes back!
    Also, I cannot install software directly from OVI Store using WLAN (error downloading), and the phone crashed several times while recognizing and focusing a face using the camara.
    I am trully disapointed with the phone. Does anyone have a solution for these problems?
    Thanks.

    You may want to check your battery and battery contacts. Make sure that a Centro battery has not been installed in this device as it is slightly smaller and will not maintain pressure on the battery contacts.
    You can try placing a piece or 2 of paper behind the battery to make to contacts tighter. A loose battery can cause most of the issue you are describing. 

  • Nokia 500 problem

    hi,
    i have a nokia 500 but sometime without reason crash..
    The second question is if i can change keyboard and put the keyboard of nokia n97 on nokia 500

    I cant believe that Nokia still produces faulty main boards ! there is less than a month that those devices hit the market end caused problem
    I fear that there will be a problem issue here in this forum for future devices before their release date .

  • Spb shell for nokia 500 problem REPLY ASAP

    successfully install SPB shell for N500. now my main problem is, while using this app. there is a blnking effect while swiping the screen....
    watch this: http://www.youtube.com/watch?v=--aoZzeyFMM
    i hope you can fix this problem
    Nokia user since 2004.
    Owned 3310, 1100, 3300, 6600, 6300, 5310, 5130, N79, 5800.
    Owns: 6230 (still alive) and 500....

    @setsuna15
    For this third party application have you tried getting in touch with developer? http://spb.com/products/mobileshell/
    Happy to have helped forum with a Support Ratio = 42.5

  • Nokia 500 - GPRS problem after updating to Nokia B...

    Last month after the announcement of update of Nokia Belle to Nokia 500, I have updated the firmware.  And it was successfull and it works fine.
    But while try to browse the internet in mobile using WAP or Mobile data, I could not do so.  There is a problem (Error in opening the page).  Before i.e. while using Anna i regularly browsed and it worked fine.  after updation only this problem arises.  I have checked all the settings and all is looking correct but could not bowsing.
    Pls help me.

    Hi somebodyx87,
    Could you please follow these steps if problem will occur again?
    1. Disconnect your phone from PC if connected.
    2. Open Control Panel and go to ‘Programs and Features’
    3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
    4. Click on the ‘Change’ button on top toolbar.
    5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
    6. Restart the computer if prompted.
    7. Now connect your phone to the PC. Driver installation should complete and Nokia Suite (hopefully) should detect your mobile properly now.
    I hope it helps!
    Cheers,
    Marina
    Nokia Suite team
    Click on the Star Icon below if my advice has helped you!

  • Nokia 500 Touch problem

    I had just brought Nokia 500 and after 2 or 3 days i updated it to Symbia Belle my touch has become crazy.
    Many times it happenes that when I am using the phone  different application like contact, web etc starts opening automitacally and when I try to to cancel it, the touch doesn't work for me. 
    please help me out of this problem. I think this is because of Symbian BELLE.
    Can someone suggest me how to go back to ANNA.....

    See the sticky here: /t5/Nseries-and-Symbian-Smartphones/Nokia-500-New-​phone-Touch-gone-crazy-aftter-belle-update/td-p/13​...
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Nokia 500 Gallery problem.

    hi. On my NOKIA 500 whn i go 2 files every sub file is not shown bt memory shows tht there is smethng in my memories. If i open files using adobe i can access everythng in my memories. Wht may be th problem. Also my captured pics only appear in gallery for jst a few hours then dissapear 4rm gallery at ar still in 4ne. ???????? Pliz help help help
    Moderator's note: We have amended the title of this post as it was moved from another thread.

    Are you using any task killing Applications? Or you updated ur Software with recent updates?if you are updated with recent Software and closes the processes that are running behind then the gallery wont visible and the Pictures wont be shown When clicked.just off and on ur mobile dont Kill any processes.

  • Nokia 500 Boot problem

    Hi...
    I have a Nokia 500 Symbian Belle version, but one day I can't start my phone, it always display a 5 dots on screen and does not continue to show the Nokia Logo, the 5 dots are blinking always and it cant boot to Symbian Belle.
    Is there any problem with the hardware?
    Thanks...
    By Michael Q.
    Moderator's note: We have removed mention of illegal flashing software which is not allowed to be discussed on the Nokia discussion boards.

    Hi MikeWare,
    If you have tried to charge the battery to full and it is still not turning on, I suggest you to visit your local Nokia Care point. Also, if you have used any third party software to flash your device, you may have harmed and void the warranty of it.
    Let us know how you get on.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia 500 display light and texting problems with ...

    After installing Belle I have some VERY annoying problems with my Nokia 500.
    While texting it turns the display light up and down.
    When I write fx a name and press # to use a big letter, it doesn't automatically go back to small letters after writing the first letter. I have to press # again.
    I have never had this problem before Belle, with any phone.
    Its really annoying and timeconsuming having to delete what I just wrote coz it has continued to write in big letters.
    Also after Belle, when browsing the text with > and < it doesn't highligt a whole word, so i can change it. If for some reason I accidently delete the last letter in a word, I have to delete the whole word and write it again. Never had that problem before either.
    Have I done something wrong to get these annoying problems, or do others also have these problems?
    Is there a fix for Belle coming up?
    And why on earth put out software with so many problems...? I wish I had never "upgraded" to Belle!!
    Hope this is not to confusing, and that someone has a fix for this.
    B.

    i believe there is an option in the Messaging options to actually turn off word prediction, so that it is off by default every time you start up the Messaging app. i also think that instead of navigating it with the > and <, you can actually tap the word on screen and it will highlight that word for you.
    as for the display issue, not so sure. have you checked via Nokia Suite that you have the latest firmware installed for your device? if so, then try re-installing your current firmware thru Nokia Suite.
    Symbian is in maintenance mode, therefore will no longer see any more major firmware updates, only perhaps the odd bug fix or two.

Maybe you are looking for

  • Updated to 2.0, now my purchased music won't play

    I can't seem to do a search since the search function for some reason has gone from the forums. I'd like to know if anyone has been able to get their purchased music to play. It will play fine on the computer but not on the iPod Touch. Information is

  • Trying to install OS 9 on my G4 400 Mhz- "Problems....

    .....were encountered accessing the file "IdapFour11.src" on the disk "untitled". Please move the file to another folder and try again." This is a 4 GB HD which, after booting to the oem G4 CD, I "Initialized". It said initialization was successful.

  • How to get the value of a variable in group footer in the report footer also

    I have a placed a formula as below at the group footer and the report footer. The data is grouped on the basis of duedays which is again formula and the value in that is appearing correctly. Whilereadingrecords; Global Numbervar CNTONE; Numbervar P :

  • Multiple inheritance in remote interfaces for EJB 3.0 session beans on Webl

    Hi All, We started migration from EJB 2.1(WLS 8.1) to EJB 3.0(WLS 10.3.2) and identified few serious problems. One of them is related with multiple business interfaces inheritance. I wrote simple example that presents point of the problem. we have se

  • SOAP Exception in JWSDP1.2

    Hi, We are using jtomcat4.1 and j2sdk1.4.2_01 with jwsdp1.2 to access a webservice using JSP. When SOAP Exception has to be thrown from the WebService, We are getting, "java.rmi.RemoteException: Runtime exception; nested exception is: trailing block