Nokia 5233 touch screen problems

Sometimes when someone calls me and I try to receive the call by pressing the touch screen button on my 5233, the button does not respond and I have to pick up the call by pressing the green button. Other times it works fine.
Since the  problem is not regular when I visited the nokia service center they could not provide any solution.
Would you please suggest something.

I have the same problem with 5230...unlocking to attend the call by sliding does not work.
I have one more issue /t5/Nseries-Devices-and-S60/screen-pad-gets-locked-whenn-dialling-5230/td-p/652534

Similar Messages

  • Nokia 5233 Touch button Problems

    I just bought the new Nokia 5233 phone.
    Whenever the phone is locked and I set a alarm. There is no way i can stop the alaram other than to reset the alarm manually by  alarms-> edit.
    There will be two touch buttons that apper on the otuch screen. One to stop and other to snooze the alarm. Even If press them, it wont work. The alaram keeps ringing. I even tried clicking on the green button and the menu botton at the bottom. Still no use. I cant even unlock the phone. Only thing i can do is press the red button at the end, which will snooze the alarm. After this, I have to manually change the alarm time.
    The same thing happens even with phone calls. I cannot use the touch button that apper on the touch screen. I have to use the green and red button at the bottom.
    These problem come into picture only if the phone is locked. Otherwise it works fine.
    What can I do to solve this??
    Expecting a quick reply.

    Hi there,
    you right abt getting two option of stop and snooze, try sliding your finger along the arrow rather than presssing the botton...you can pres the red button to put in to snooze also.
    I believe you will same issue when you recieve your call while your phone is locked, you get "unlock" and "answer" option, out here too slide you finger along the arrow.
    i hope this will help you. 

  • Nokia E6 touch screen problem

    My E6 00 comes with symbian belle i bought it last month a week leter the touch screen stop functioning proper, i need to lock it and reopen it every minute for me to use the touch screen and even then its not all the part of the screen that is working like the option key, OK or cancel key, the drop down menu at the top of the screen which can be used to on/off the network connection. I've used *#7370# to format it twice but the problem still remain i regret buying the phone. please ! someone should help me on what to do i'm confuse

    Have you checked that you have the latest firmware onn your device via the device itself or Nokia Suite? If there is an update offered, please update. If that doesn't work, try re-installing your current firmware through Nokia Suite. Failing that, perform a three finger hard reset, and if that doesn't work, then you will need to take your phone to your local Nokia Care point for them to inspect.
    http://nokia.com/support

  • Nokia 300 touch screen problems

    hi ,  i have bought this nokia 300 recently and after just three months its touch screen is malfunctioning, the proble is that if u touch the left side if the screen the effect is visiblle on  a little right side, not that exact point which i want to click. e.g if i touch alarm , it open calender, need help 

    uvijay wrote:
    Nokia 300 touch is not working.I understand Nokia touch is not working properly for many people . But unfortunately we bought two touch models of Nokia both not working.
    Hi uvijay,
    Welcome to the forum.
    Have you done calibrating the touchscreens of the two devices? Also, check if soft reset will fix your problem. You can do a soft reset by dialing *#7780#. After that you'll be asked to enter a lock code. Just enter 12345 if have not changed it. You can also do the steps advised by @ng85 (message no. 4) above. 

  • 5233 touch screen problems

    I am having a problem with my touch screen
    if I press 3 or backspace in vertical mode 0, 8, or 9 gets pressed
    after getting it back from nokia care I started receiving the same problem in 1 hour
    i changed it twice in 5 days
    they are yet not giving me a new phone
    plzzzz help!!!!!!!!!!!!!

    I have the same problem with 5230...unlocking to attend the call by sliding does not work.
    I have one more issue /t5/Nseries-Devices-and-S60/screen-pad-gets-locked-whenn-dialling-5230/td-p/652534

  • 5800 touch screen problem

    I have this phone from six months.
    It is having touch screen problems since a few days.
    like for eg. When I tap the message icon it opens gallery,The touch seems to be on right side wherever I tap or touch.The phone then when it gets restarted works fine.
    Touch screen calibration does not seem to work and I have the latest firmware update too.
    Please help.
    Thanks

    Had my 5800 for a few months now, and had no issues until 2 days ago.  Suddenly, the touch screen stopped responding properly and was selecting the wrong icons.  It was impossible to write a text message!  The weird thing was that it wasn't selecting the next character/ icon to the left, it was completely random!!  Tried turning off and on and removing battery, but that didn't work!  Calibrating the screen also didn't work. 
    About 3 hours later I felt it vibrate in my pocket, so took it out and couldn't figure out why (no call/ text/ keypad still locked etc) but the touch screen was back to normal as if nothing was ever wrong!
    So, happy it was just a minor 'blip', I carried on using the phone (with no problems) until tonight... Exactly the same has happened!  Guess it'll be going back to Nokia for repair tomorrow!

  • N97 Touch Screen Problems

    My N97 has intermittent touch screen problems where it will either respond in the wrong location, lag, or just be completely non-responsive. I'm pretty sure that it's not hardware as after completely rebuilding (remove all apps, format the mass memory, hard reset, re-install v2 fw, hard-reset, re-install apps, re-load mass memory) the phone and the touch screen work with no problems for several days, then after 3-4 days the problem reappears.
    I suspect it's related to two problems with the phone: the first is that there is still a bug with the lock/unlock slider; the second is that the phone is too underpowered (CPU & RAM) to multi-task (especially email retrieval) and process the input of the touch screen.
    Is anybody else having similar problems with their N97 touch screen, if so do you have a solution? 
    Nokia N97 (RM-507) v 22
    iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

    @froschy:
    My observations are 100% consistent with yours. The packet data end does solve the problem, but only if the screen is not 100% non-responsive. I can also confirm that the WiFi status has absolutely no effect on the problem.
    There are also quite a bit of other possible causes that can be ruled out from the get-go:
    1. Insufficient RAM or CPU in general activity. I can rule this out as the phone works well even if I have 12 applications open at the same time. However, the issues happen sometimes even if nothing is running in the background. If this issue is related to memory leaks or similar bugs, it has nothing to do with the ones I normally run and has to be something in the background (like contacts, phone or messaging, clock, maybe others?) that is cuasing this.
    Also, even when the screen is not responding correctly, I can still do stuff on the phone without lag. This is really weird but very true. I can do pretty much anything as long as I use the slide-keyboard instead of the touchscreen.
    2. The 3G network is not to blame. I live in Romania and I use Vodafone, which has 3.5G (3G+, HSDPA or whatever you want to call it) and is a very well established technology for these guys (they use it since 2005 I believe and have great coverage for it). The fact that you and me both have the same issues pretty much points to no influence on the provider or network type, IMO.
    3. The screen is not faulty. I hope. All pointers rule this out, but really, you never know in the end :-D
    4. The firmware version seems to be irrelevant up to this point. I have been having this problem since v11 and now I'm running v20. If this will be fixed in the future, I have no idea. However, if it gets fixed, we will know.
    =========
    At this point I can also identify some key points about the phone usage which are common to both you and myself:
    1. We use the GPRS / 3G connection on a regular basis.
    2. We use the mobile email client to check email on a regular basis. For my part, I use MailForExchange and keep it in sync pretty much all day long. Though, at work, I use WiFi instead of GSM connection.
    Maybe these two points are of importance. On the other hand, maybe there is something else that may be common to both our phones. I have an N97 RM-505, FW version  20.0.019.C01.01 (firmware is not really relevant anyway).
    Cheers,
    C.

  • Touch screen problem with N97

    Hi all, after u update my software to 20.x.x.x i get touch screen problem and every minute hanging
    even now the touch screen not respond at all, an options how to fix it?

    after every update, i always backup my data and soft reset my phone *#7370#
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Sony Ericsson Vivaz touch screen problem

    I have a sony ericsson vivaz bought on nov 2010. It was working perfectly fine till last two months...... I startd noticing touch screen problem on top left part.. while typing messages in querty mode, i cant select caps ON button.. instead it displays"Z" on the screen. I tried to calibrate. but i could not start it as my top left part is not sensing any input..  what shal i do??
    how much wil it cost to repair it??
    Im frm India.

    try
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • TOUCH SCREEN PROBLEMS IN IPHONE

    WANTED TO KNOW IF ANYONE IS EXPERIENCING TOUCH SCREEN PROBLEMS WITH THE UPPER HALF PORTION OF THE IPHONE. IN THE PHONE MODE THE 1, 2 & 3 NUMBERS DO NOT RESPOND TO MY TOUCH. IN THE HOME SCREENS, NOTHING IN THE FIRST ROW OF ICONS RESPONDS TO MY TOUCH.
    I HAVE ALREADY RESET, RESTORED AND LOADED THE UPDATED SOFTWARE.
    VERY FRUSTRATING. HELP.

    When restoring my phone didn't work, I backed up my data and made an appointment at the Apple Store. I went prepared to argue my case as my phone was over a year old (I got it the first day it was out) and didn't do any thing to damage the phone. It just developed this dead spot. I was honest about how long I had the phone and expressed that this was a common problem that is all over the internet and from what I could tell, I wasn't the only one in there for this problem. I was tipped off by a question he asked, "What row went dead?" He obviously had seen this enough times to know that different rows in the home screed went bad. I told him the second row. The conversation went on and somewhere there was some back room talks and they replaced my phone, which was very nice, but I'm betting this doesn't happen all the time. I think I got lucky. Over all I give Apple a 10 out of 10 for Customer Support. I doubt I would be so generous if I had to buy a new phone. I was told at first that it was going to cost me $249.00 to repair the phone, maybe he said $199. At any rate, I would have bought a new G3 instead of getting this one repaired. I tried to get the Apple Care on the replacement phone but they wouldn't allow that. So I have a 90 day warranty right now. I highly recommend that you get Apple Care on the iPhone. I'll be getting it on my next one. I don't know if this phone is new or a refurbished phone. It looks new, but I'm guessing it's refurbished. All in all I'm hoping that Apple realizes this is a problem with the screen and it's a problem that they need to fix or continue to fix when they go bad for no good reason. Well that's been my experience hope yours turns out as well.

  • IPhone 5 touch screen problem?

    Here's the thing... I've saw several forums and YouTube videos about the iPhone5 touch screen problem. I have the same problem too. But it seems that this happens when it's near a running laptop or a computer. Can anyone explain why this happens or is it just my phone? If this is just my phone problem, what should I do?

    i restored as a new. I am facing following problems :
    1. if iphone is locked then it won't get unlocked. I need to swipe/restart many times to unlock it. or need to use siri to unlock it.
    2. after unlocking iphone, it will work normally for few mins then there is some abnormal behaviour in its working.
    for e.g some applications will open without actually opening it. some applications will close automatically.
    3. sometimes suddenly in the middle of work, iphone touch will stop responding.
    There is no specific case for above problems. I m facing these issues in the middle of any applications at any moment of time.

  • Nokia N8 touch Screen stop working..

    first of all Thankyou for reading my post.
    espicially to those who wanted to help me.
    also before i post this problem i read lots of problems same as my phone problem.
    main is Touch Screen wont work.
    i did this.
    8secs depressed the power botton. failed.
    depressed volume down + camera + rare botton + power botton - failed.
    i tried also to restore factory setting. but the code 00000 0000 or 12345 factory default code. wont work also.
    guys if anyone knows how to fix my n8 touch screen.
    and im using the mouse to navigate my phone.
    please help me. the phone ages 21months.
    before this problem happen. i installed an application called.
    freeware LIE DETECTOR.
    and after that it stop working..
    any idea suggestion or fix solution is much appreciated.
    im a loyal user of nokia since my phone back then is NOKIA 3210.
    please help me sir/maam.
    thankyou very much!

    done updating.. this so called microsoft plugins configuration.
    still touch screen is not working.. what should i do.. please help!
    im not from EU sir.
    im from philippines i bought this cellphone when i was in saudi arabia.
    so that means warranty is not applicable to my location right now.
    pressing power button 8secs and menu volume camera power it does reboot.
    but after that still touch screen wont work.
    is my phone broken?
    by that application LIE DETECTOR?
    that means i cant trust nokia applications at all.
    i dont know what to do.

  • Nokia C6- Touch Screen is not responding

    Hi 
     I have bought a nokia c6-00 few month back.. from last two-three day, the touch screen of this cell is not working properlly..Even i have restarred mobile many time..some time is working..but within the second again faceing the same problem...
    Is any one faceed this type of problem. is this a software or hardware proble..
    it is very disappointng me..
    Please have any solution for same..
    Regards
    shtru

      Hi  Shtru,
    I will suggest you try and calibrate the device first by using the keypad, the steps to do this are as follows:
    Menu > Settings > Phone > Touch input > Touch screen calibration. Follow the instructions on the screen.
    This should address your issue.
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • C3-01 Touch Screen Problem

    I bought a Nokia C3-01 today morning from Delhi Airport. However, to my dismay, when I reached Pune, I found that the touch screen does not work properly. If I touch an icon on the top line of a grid, the icon on the bottom line gets selected. If I touch the bottom line icon, nothing happens. Any solution??

    This is karthik and i purchased nokia c2-03 a day before tomorrow.There is no data  in the phone even in the memory card.Every time i click on ovi store button and music button it gives an error message that memory needed delete some items want to know that there is no installed themes ,games etc in the phone just 10-15 SMS are there then where is my phone's memory  use.Even when i call to customer care they told me to restore the phone then surely your problem will sought out..But it still there..CC also told me that go to nokia care adn FLSH your device once.So tell me after flashing the problem will sought out ... They also said format the memory card for virus.Now the one problem may arise that all data related to app by default given by nokia is all formatted.And now my some app are not working(default) like calculator and all..Please help me sir.I am very disappointed by NOKIA  C2-03..2days before I purchased..

  • Hp officejet pro 8500a - Touch screen problem (bottom right-left side)

    hi,
    I have a problem with my printer since i changed the black cartridge. At the screen, it display a message with OK at the right/left side but  when I touch the bottom right/left side of the printier touch screen, there is no reaction, can someone tell me what to do. Although, l can print from my computer but i can't make copies from the touch screen.
    Bonjour, 
    J'ai un problème avec mon imprimante depuis que j'ai changé la cartouche d'encre noire. Sur l'écran tactile, je recois un message comme quoi la cartouche a bien été installée et avec 'OK' dans le coin inférieur droit de l'écran. J'ai beau appuyer sur la zone, le message reste à l'écran. Toutefois, je peux imprimer. Cependant, j'aimerais pouvoir copier en couleur des documents pour en faire des copies directement à partir de l'écran tactile. Pouvez-vous m'aider?

    Hello DanTR,
    I see that you are having an issue with the touchscreen on the printer.
    When this issue happens it is typically a power related issue. Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I would also suggest that we run the HP Officejet Pro Firmware update.
    Please feel free to write back if you have any other questions or concerns.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Unable to import Basis (R3) objects to Integration Builder

    I am trying to import RFCs and Idocs to the Integration Builder, but am getting the following message. Unable to establish connection to R/3 system sapdtdb (system=00, client=010) Troubleshooting tips: Is the target system online? Check the connectio

  • Cost Reports in IW32

    Hi, I have made some sttings changes for the cost report in IW32. Now when I go to the cost reports in IW32, the system is going dump. Can I revert back the changes what I made in the cost reports settings? Prase

  • Product category not visible in search help

    Hello, We have performed changes to product categories in Dev system and moved it to Q. I can see all the cateogories correctly in COMM_HIERARCHY, but when I try to add them in the org structure to users, I can't find them. Any idea, why this could h

  • E-mail & spam

    received a strange e-mail - from Mail Administrator <[email protected]> with an attached text.pif file - telling me i have been sending out spam and to download and read instructions to correct computer problem. i am trying to figure out if it is leg

  • Pass continuous discrete averages out of loop

    Hi, I have a DAQ that's acquiring 1 sample at 1 Hz. I am trying to get the program to continuously acquire samples but to output the average of every 10 samples, which I use at a later point in the program for calculations. I have found a lot of topi