Nokia 7373 important issue help! (:

Hi, I bought my Nokia 7373 September 2008.
It was second hand but hardly used and worked brilliantly until around about December.
Whenever I record something on the phone, after a minute or so the entire screen turns white/blank and then the phone reloads. If I check my gallery to see if the video recorded it comes up with 'file format not supported'.
Also, whenever the phone does this recently all my messages get deleted! O__O
I heard there was a way to restore all text messages but I don't really want to do that.
The phone supplies a folder called 'Saved Messages' and in there I'd had a lot of messages I loved and wanted to keep lmao, and now ALL my messages have gone!
The phone has only started doing this the past few days, nothing like my photos etc have gone missing.
Just my texts constantly all get deleted when I turn my phone off and I don't know why.
The message validity is set to maximum so I'm not sure what's going on.
Please help.
x -jen.

Sometimes using both the fone and sim memory at the same time causes this. Copy all contacts to the handset, choose handset memory and see if this resolves the issue.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Similar Messages

  • Nokia 7373 turning off help

    I'm having a bit of trouble with my Nokia 7373, it won't seem to switch off. When pressing the switch off button it makes the vibrating sound and has the screen to whether i want the phone turned off or not.
    I'm trying to get my battery to go dead but am worried that it may not turn back on again.
    Hopefully you get what i'm trying to say.
    Thank you

    Hi fedup
    Have you tried backing up your data and reformatting your micro SD memory card?
    Is there a software update available on NSU, which would give you a fresh start?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Help for nokia 7373

    I know this may sound like a strange request, but if there is anyone here with a Nokia 7373 phone, i was hoping you might be able to help me.
    I have one of these, but i have managed to crush my display so i can't see anything on it.
    So if there is someone here with this phone, then maybe you would be so kind and write down a step by step guide how to turn bluetooth on because i would like to transfer all my photos and music to my pc.
    That means....
    Press menu
    go 1 left and 1 down press ok
    go 3 down press ok
    etc...
    Thanks a lot for your help.

    go to menu >setting >call setting >divert >cancel all divert..and activate again and insert other number or just using your mailbox..sometimes it depends on carrier actually..so contact your customer service..

  • Help me, oh great Toonz! (Slow import issue - # bazillion!)

    Toonz you seem to be the most knowledgeable about this slow import issue.
    I am trying to import from music CDs to a brand new, out-of-the-box, Maxtor External Hard Drive (usb 2.0). Currently I have a Dell Dimension XPS T500 Pentium3 w 512MB Ram and also a newly installed Sony 52x optical drive. Yet I still suffer from import rates of 3.0 or less.
    Here is my CD Diagnostic from iTunes (which is hogging my CPU, btw).
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation XPST500
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: RADEON 9200 PRO Family (Microsoft Corporation)\RADEON 9200 PRO Family (Microsoft Corporation
    IDE\DiskWDCAC29100D___________________________J74OA30K, Bus Type ATA, Bus Address [1,0]
    IDE\DiskWDCWD200BB-75CAA0_____________________16.06V16, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskMaxtor6L200R0_________BAH4, Bus Type USB
    IDE\CdRomSONYCD-RW__CRX320EE____________________RYK3___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: SONY CD-RW CRX320EE, Rev RYK3
    Audio CD in drive.
    Found 6 songs on CD, playing time 66:34 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 19:49:35
    Track 3, start time 26:25:28
    Track 4, start time 37:23:48
    Track 5, start time 48:29:23
    Track 6, start time 57:47:15
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 52.
    The drive CDRW speeds are: 52.
    Help me Obi-wan Kenobi, your my only hope!
    Thanks.
      Windows XP  

    See if Slow Imports can help.
    Good luck.

  • Can anyone help? Nokia 7373 too quite!

    I have the Nokia 7373 and have put all my music on but the volume on full is not enough when out and about. Is there anyway to make it louder? New headphones etc. ThanxMessage Edited by angelx1974 on 26-Mar-200704:17 PM

    Not sure about changes to the phone but you could try editing your audio files instead. I use a MP3 editor called Wavepad which is free to download. With this you can easily increase volume (from the menu Effects/Amplify). You can also use it to chop tracks to ringtone size, rip CDs to mp3 etc etc
    BRs Phil DeForce (Nokia RAN guru)
    "Accept that some days you are the pigeon, and some days you are the statue...."

  • Nokia 7373 Help plz

    I have a Nokia 7373 and its on orange and i want to put my vodafone simcard in it and its asking for the verification code does anyone know what it is?
    Thanx Emily
    x

    if you have baught this phone from orange, then it's most propably locked to that network only, so no other sim card from any other company can be used.
    a verification code is usually an unlocking code provided to you by your old provider " orange" to allow the use of other sim cards, and which they will not give to you
    Fear not those who argue but those who dodge

  • Nokia 7373 Incoming calls

    I got the Pink Nokia 7373 a few days ago but I'm having trouble with incoming calls.
    All incoming calls, regardless of their location or network are coming up on my screen as "CALL"
    There is no identification of who is actually calling me.
    I've looked in all settings on the phone and don't have a clue why it is causing this problem.
    Please help as it is driving me around the bend!!
    Faye

    Faye,
    Caller identification is an operator issue. Please contact to you mobile operator to check it.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

    Okay, still trying to get my import issue resolved.
    I have a SONY HDR-HC3 DVmini.
    No problems with iMovie 3 on my Powerbook.
    iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
    My buddy thinks it might be a Quicktime issue.
    He said to download Quicktime Pro, that might resolve this issue.
    I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
    THANX

    Hi
    Can be so much.
    Often Camera has to be connected to Charger/mains during Capture.
    An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
    My list on this
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • Duplicate Video Import Issue

    Hello,
    I am running PPRO CS6 (6.0.3) on Windows Vista
    I am having a duplicate asset import issue. Let me explain...
    I have a couple of Premiere Pro project files with multiple sequences in each. In each of the project files I have the same source video files imported as the some of the sequences in each of the project files reference the same source video file.
    So here it was is happening...I have a project file with sequences 001-025 in them and I have have another project file with sequences 026-050. I have 25 sequences per project to keep the project sizes smaller and more manageable so my system doesn't choke.
    Sequences 014 and 015 in the first project file both reference "Video01.avi" which is located on my external F: drive. I want to import sequences 027-030 from the second project file which both reference the same "Video01.avi" file on the same drive.
    I know PPro is intelligent enough to know when importing assets from another project file that shares the same assets as the project you are importing into, it knows to only import the dependent assets which are not in the project file you are importing into. I have done this countless times and PPro has correctly only imported the assets it needed.
    However for some reason when I am trying to import the above mentioned sequences from one project into another it is bringing in a duplicate copy of the source footage necessarily. I can't figure out why it is doing this. The sequences it is importing both reference the identical file on the same drive, etc. And I am using the "Import Selected Sequences" option.
    Thank you,
    Shane

    I think I have solved my own issue. As stated above when I was trying to import sequences from another sequence it was brining in a dup copy of the same clip in the sequence. I was able to successfully have it not do that.
    What I realized was happening is that even though the source footage video file is identical in each project file, when I opened it up the clip in the source monitor I had different IO points set for each version of the clip in each project. PPro I am assuming imported the second copy to preserve the IO points on the second version of the clip that was being imported.
    I simply cleared each set of IO points on each reference of the clip in the project file and I was able to import the sequences I wanted without bringing in an additional copy of the source clip. So now I just have one copy of "Video1.avi" in my project file instead of multiple.
    Hope this helps someone in the future who may be experiencing a similar issue.
    Shane

  • Sat nav software on nokia 7373

    hi does any1 know if there are any sat nav software that will work on nokia 7373.
    There are the normal ones for nokia n95 and so on but would any1 of them work on 7373.
    thanks

    Hi nm_coolj
    You could try nav4all.com - whilst software is free until 2008, there is cost of GPRS data download to factor in!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia 7373 back cover

    Hi
    does anyone know where i can find a replacement back cover (battery cover) for the nokia 7373 as mine broke and cant figure out where i need to look etc.
    thanks

    Take it to a Nokia Shop and ask them to have a look at it. Perhaps they can replace it for you.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • Memory card in Nokia 7373 not showing

    I have had a memory card in my nokia 7373 for some time and all has been fine. However, recently my daughter had the phone and someone pinched the sim card and it was dropped on the floor. Now no memory cards will work in the phone. I have put it in the pc and all the ringtones etc are still there, i have even bought a brand new memory card but it just will not show up at all.
    Can anyone help at all????
    Cheers

    If no cards will work then the phone must have been damaged when it was dropped.
    A nokia care point may be able to help you.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • NOKIA 3120 classic owners - HELP MEEEE!!!!

    OK, so... Heres my situation.
    My phone's screen is dead, however i can still use it to full function. So im more or less blindly navigating around my phone.
    I plan to get a new phone, however, i need to get all the contacts off my phone.
    I have the USB data transfer cable, and the pc suite. But my phone is set to file transfer mode, so i'm unable to sync with my computer to get all contacts/messages etc off the phone.
    I need someone to lead me through the clicks to get to the settings where i can change my phone back to PC suite mode to gain access to all of these contacts and such, pleeeease someone help me!
    If not, is there a way for someone to get my contacts off the phone not using the PC suite?
    Please, someone, provide me with some solutions to my chronically important issue!
    Cheers, 
    Hardstyle Haz

    Our senior member mccbleue has written an article in our Pool of Knowledge regarding that!
    /discussions/board/message?board.id=topfaq&thread.id=164
    Give it a try and let us know if it worked for you!  
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Nokia 7373 - replacement cases

    Okay, so the plastic screen cover on my Nokia 7373 was cracked. I went into my local Nokia Care Center who said they could replace it for me, but they didn't have the right cover (I've got the swirly black one). I found one online at Amazon (http://www.amazon.co.uk/Nokia-NOKIA-7373-LENS/dp/B​000W7ZTSO/ref=sr_1_14?ie=UTF8&s=electronics&qid=12​...)
    I thought this was the sort of thing I was after as it's sold as New, described as from Nokia, so it's the official thing. So having bought it, I went back into the Nokia Care Center only to be told that they couldn't fit it and I'd have to order one (now they tell me they can order them in!) and pay triple what I paid on Amazon. Is this true? Have I bought something that is absolutely useless to me? I'm thoroughly confused as to why this would be sold to the public if it wasn't useable. Help?
    Thanks

    18-Sep-2007 07:07 PM
    psychomania wrote:
    Well said dave!
    The morale of this story is that if you take your phone apart then it's your own silly fault if it doesn't work properly.
    And later shout hoarse about poor Nokia's poor service
    Nokia should put a warning saying" Opening phone panels by user will void warranty" in bold
    If my post has helped you please click the white star on the right

  • No USB Cable For My Nokia 7373

    I just brought a new Nokia 7373 but there was no USB cable to connect to the computer.
    I was wondering if anyone knew how to get one, or of another way i can download pictures to my phone.
    Please help Me!!

    Hi smile_its_soph
    What wrong with Bluetooth through PC Suite. A Bluetooth USB "dongle" is cheap enough!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for

  • Temporary file Generation issue - file Receiver Adapter(NFS)

    Hi Experts, We are using Dynamic Configuration for generating the Dynamic File name as per the requirement in the File receiver communication channel with transport protocol NFS. As, per the requirement we need to use the "Use Temporary File" in writ

  • Message scheduled (waiting )

    Hi All, I noticed message to BPM is waiting with <b>'Message Scheduled on outbound side'</b> in SXMB_MONI. I read other messages on the same error, tried to delete all the queues with /nsxmq1,nsxmq2. and re-registered,activated all the queues in sxmb

  • Individual versus Company listing for Apps

    I noticed that some apps have the developer's actual name and other apps have the company's name listed.  What is the benefit to listing as an individual as opposed to listing as a company?

  • Cascaded Prompts in OBIEE 10g

    Hello friends, Can some help me to understand how to implement cascaded prompts in OBIEE 10g? My situation is: I have three Prompts P1,P2 and P3 P1: Values are comming from a table P2: Shows the value from a Stored Procedure, such that one stored pro

  • Black screen after the installation of the graphics driver

    Hello, - Recently I bought a 'GT 610' graphics card to replace the old broken one, - after the assembly one short beep was audible during system reboot (=OK), - a default windows graphics driver was installed by Windows Vista, - screen resolution man