Nokia E52 Dust Problem

Hello, I have such a problem that I have dust and dirt under the screen so I decided to take off the front cover but part of it where are the buttons I can not split up.
Should I use more power to take off this part of buttons(lower cover)?
I do not want anything go wrong there
Thanks for your hepl...
I added two images for better vision.
Attachments:
IMG_0023.JPG ‏1043 KB
IMG_0024.JPG ‏1008 KB

We cannot help you with that here as it's against the rules of this forum to discuss disassembly.
Nokia care points can remove dust from devices, or you could try an unofficial forum such as www.dailymobile.se

Similar Messages

  • Nokia E52 video problem

    Hello all !
    I have a problem with Nokia E52....previously i've owned a Nokia N95 8GB and it was a great phone ! Now that i've swapped it with a Nokia E52, i transferred all my videos from the N95 8GB to my E52 to discover a very annoying thing: videos played on the E52 that comes from my old N95 stutters (both audio and video).
    Video heavily skips on the E52...i don't know why....i've tried moving the video to phone memory, same thing happens also ! It so much skips that videos are very unwatchable...isn't it supposed to run smooth ? Or am i missing something here ?

    Well, in that case, consider a reset.
    1)  *#7780# 12345 restore factory settings, keep data
    2)  *#7370# 12345 reformat, lose all data
    What I meant earlier is, place the files from the memory card on the PC, check the files. Place the memory card in the phone and format the card, it creates default folders for video, audio, etc... Then place the files from the PC back in the default folders. 
    Message Edited by hadimassa on 05-Dec-2009 06:09 PM
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Nokia E52 maps problem

    There is phone E52, and I have a problem with folders. Since it posses, and I have not had any of the installed folder, or I needed so I did not interesed. But now I need the time but do not know how to install folder. Does not offer me any update folders from the phone and the Nokia Suite equipped with an I do not remember at the moment but I'm over it and tried it, however even he does not give me anything. Is there a trick to install in existing folders foleder I have in memoriskoj card. I'm interested in maps of Serbia. Where can I find to throw. I searched the whole internet and can not find a solution.

    It's very difficult to understand what the question really is. You can send me a private message in your language ( salji mi privatno poruku), si I try to help.

  • Nokia E52 Firmware Problem

    After the latest firmware  update 33.002
    my call logs automatically gets deleted 
    i also tried *#7370#
    But nothing improved
    Now what to do

    My call logs are still there - same FW

  • Nokia E52 Exchange Calendar sync problem (Critical...

    Good day,
    I am using NOKIA E52 and e-mail for exchange on it and Calendar sync don't work fully.
    As I read other post that others has the same problem.
    We are using Exchange Server 2010!
    It is supercritical and stopped fully my job!!!
    Please give a solution!!!!!
    Best Regards,
    Girts

    Hi all,  
    The boards here are for user-to-user support only.
    If you want to provide any feedback directly to Nokia, you should use the 'Contact us' link at the top of the page to contact your local Nokia team. 
    Regards,
    Nixy_Fedorov
    Moderator

  • Hi i have problem with nokia E52 SL3 I can t unl...

    if some can help me i have problem with NOKIA E52 SL3   SOFTWER ITS LOCK I BUY IN POLAND FROM ORANGE

    @aleksandars
    Welcome to the forum!
    This remains an issue between you and your network provider Orange, a procedure in which Nokia has no involvement unfortunately.
    Happy to have helped forum with a Support Ratio = 42.5

  • VoIP problem Nokia E52

    Hi!
    I have a problem trying to setup JustVoIP service on my Nokia E52. I installed the VoIP Settings Manager and set up everything as below:
    Profile Name: justvoip
    Service Profile: IETF
    Default Destination: Internet (I am using VoIP via my Home-WLAN)
    Default Access Point:  none
    Public Username: sip:[email protected] (Note: “sip:” will always be added automatically)
    Use compression: No
    Registration: When needed or always on (choose your preference)
    Use Security: No
    Proxy & Registration Server have identical(!) values:
    Server Address: sip:sip.justvoip.com
    Realm: justvoip.com
    User name: YOURJUSTVOIPUSERNAME
    Password: YOURJUSTVOIPPASSWORD
    Allow loose routing: Yes
    Transport type: UDP
    Port: 5060
    I see the service but I cannot enable it. Whan I try to activate, the message "Invalid settings" appeares. The most funny thing is, that at the beginnig it worked fine! With the same settings! Anybody know, what is going on here?
    Thank you for your help!

    Same issue on E72 and XM 5630 here. Other people experienced it also with N97.
    you can read this info in http://discussion.forum.nokia.com/forum/showthread.php?t=192607
    VoIP3.x registers a user, it writes a randomly translated username in the contact URI, i.e. aweofj293j2c0239jdwiofje0@nataddress instead of username@nataddress 
    Ougoing calls are not an issue (when the client succeeds to register) howevver for incoming calls the server has to put this translatedusername in the request-URI of his INVITE. Some Registars do that, but yours and mine don't.
    This interpretation of how SIP should work by Nokia was not implemented in prior versions of Nokia VoIP settings (v 2. and v 1 used on FP1 models such as E61, N95, etc) thus enabling incoming calls to work for all.
    Now however it seems this is the new standard Nokia has chosen to go for with all new models thus leaving us with a choice to either :
    1- have our service providers patch their registrars to make them work with this new Nokia implementation or
    2- use alternative third party VoIP apps for our devices instead of the native/integrated Nokia SIP client. or
    3- change SIP service provider to use ones that run Registrars compatible with this new implementation...

  • NOKIA E52:: Nokia fix the problems

    Nokia kindly Fix the firmware of the nokia E52.
     You released a firmware just for ovi maps.
    Primarily a phone is a communication device between  2 or more people and secondary could be used for navigation via maps.
     Why should my music player start playing when I end a call???? All by it self.
     TO HELL WITH MAPS.I WANT A PHONE TO FUNCTION AS A PHONE.
    Have you lost track what a GMS phone is meant to do as its primary function??
     ovi CONTACTS messes up my numbers when I upload???? It adds numbers to contacts for m other contacts.
    Sort your stuff out.
    If you like my post kindly hit the Green Star Button on the left.
    Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)

    feeldennis wrote:
    Nokia kindly Fix the firmware of the nokia E52.
    Primarily a phone is a communication device between  2 or more people and secondary could be used for navigation via maps.
     Why should my music player start playing when I end a call???? All by it self.
     Sort your stuff out.
    I am accompanying in protest for that not-solved problem with Music player. I wrote Nokia-Contact us (in my language) about this problem, but no use. To have music player that STARTS PLAYING AFTER IT IS PAUSED is so annoying. You have player that you can't control.
    For that reason I don’t use Music player any more. I downloaded program PowerMP3 and HandyMusic and listen books on one player, music on second.
    I find E52 excellent mobile phone, quality made, with good navigation features, with so good innovation for browsing contacts that I am delighted.
    I am very annoyed (in IT generally) with more and more applications that I can't control. I had Nokia 6233 before (serie 40). It has player much better than in E52.
    Why I can't determine what folder is to play? Music player plays whatever it recognize as sound! Stupid. It plays when I don’t want it to play. Stupid. I can sort music for so many criteria but I can't sort it by file name. So when I have 150 mp3 files, and some of them don’t have all input so precise (author, artist, composer, genre…) you have problem to find mp3 file you want to play. Plus, you can get some annoying ring tones in your ears! Why, for God sake, I can't play only folders that I want, and sort songs (only) by their file names? It is so unlogic for me.
    The same thing is with Images in Gallery. You find any picture you have in mobile! Why I can't decide whether I want to find every image in mobi, or to brows specific folder that I chose? I tried with File manager but, when I open one image, I can't brows further. I must close image, then go to next, then open it… So much waste of time and nerves.
    I often listen very long mp3 files (books and recordings) that last more then an hour. So, I have additional problem. In any player it is easy to click buttons accidentally that brings you at the beginning or to the next song. So when it happens after I listened 45 min of recording, I am very desperate, because I have to listen the same recording 45 min again. There is no player for non-touch screen mobiles that can bring you fast foreword in any kind. It would be nice if I could determine player to start playing from 45th minute of the recording.  
    In addition, I can't determine volume of the ring tone for sms, e-mail, reminder, alarm. When you determine volume of ringing you determined volume for any alert. There should be options to change it separately.
    Business phone should have much more user-controlled features.
    I hope programmers from Nokia read this site.

  • Losing internet connection on Wi-Fi (Nokia E52)

    Hi Everyone!
    I have:
    1) PC (Windows 7) with ASDL internet (D-Link DSL-200) and USB Wi-Fi Adapter (TP-Link TL-WN821N)
    2) Two netbooks (Windows XP)
    3) Smartphone Nokia E52
    I want to: share the Internet from PC to other devices via Wi-Fi adapter.
    The problem: on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding
    Updates, drivers, firmware:
    Windows 7 - all the latest updates.
    Windows XP - all the latest updates.
    D-Link DSL-200 - installed the latest driver.
    TP-Link TL-WN821N - installed the latest driver.
    Nokia E52 - installed the latest firmware (091.003 \ 03-Apr-2012)
    I was standing on a PC Windows XP. First I tried the program Connectify Pro. Speed is low, not always connected. I created connection manually by Ad-Hoc mode (I manually prescribed IP and DNS addresses). On netbooks, connection is good! But the problem is with the smartphone. Sometimes the connection is lost, on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding. I thought, that USB Wi-Fi adapter's power saving is active, but it was disabled. My friend recommended installing Windows 7. I’ve install it. The same thing ... (on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding). Situation is the same in Ad Hoc mode and in SoftAP using MS Virtual Wi-Fi or Connectify Pro.
    Is there any solution?
    By the way! I forgot to say, if any of netbook will be connected to the PC via Wi-Fi, the smartphone does not lose internet connection, but turning off the netbook creates the same problem after minutes (on PC Wi-Fi connection disconnects with smartphone. But on smartphone, connection is active, the smartphone sends the packets, but the PC is not responding).
    Wi-Fi connection on netbooks is good, internet works, no disconnects.
    I read on the Russian forums, that such a disease is on all Nokia S60 smartphones.
    P.S. Sorry for my bad English.

    Hi AssIsBack,
    Thanks for your feedback and welcome to the forum.
    From your description I make it you are creating the ad-hoc connection using the TP-Link TL-WN821N? As a general rule it is not advisable to use ad-hoc for 'permanent' WLAN connections. This is more intended for quick 'point to point' connections and is generally considered to be both unstable and insecure. Also it could be you are using the same USB hub on your PC to connect both the modem and the WLAN interface which may cause these two devices to interfere with each other.
    I would strongly suggest you replace the D-Link DSL-200 with a modem which has a WLAN accesspoint built in. You will find this will increase your networks dependability and speed. It will also allow you to have your PC turned off and still be able to use WLAN with your phone.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Nokia E52 - Default number not working on Firmware...

    Hi,
    Just bought Nokia E52. When I select  default number among some number for a contact, it still asks me to choose number while calling or sending a message. Sometime it asks, and sometime it does not.
    When will we get a fix for this ?
    Regards,
    Tamour

    This is a classic problem on these new FP2 phones. I had the same problem with my N96.
    You'll need to have a memory card inserted for this and you'll have to re-populate your contact groups afterwards, but the solution is to go into your contacts and then:
    Options > Mark/Unmark > Mark all
    Options > Copy business card > To other memory > memory card
    This exports a bunch of VCF files to the memory card.
    Next, delete all the contacts from your address book
    Options > Mark/Unmark > Mark all
    Press 'C' and confirm.
    Now re-import the contacts from the memory card:
    Options > Copy business card > From other memory > memory card
    This will re-import all your contacts and it will now be possible to assign defaults.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Nokia E52 - where is my contacts?

    Hi guys.  I have my Nokia E52 for well over a year now and can't say it has given me any problems of note.  However, recently, I started using an instant  messaging service named WhatsApp.  It was working fine in the begininng, but one day while using it, it made the phone switch off, and would never swich back on.  I sent it in for repairs and it came back working fully functional. 
    That lasted all but 1 week, before I noticed that suddenly, all my contacts have disappeared from my phone memory.  I can not find a single one.  The weird thing is, if somebody calls me who was previously in the contact list from the phone memory, their name appears.  So, somehow, it seems to me that the contacts are there, but I just can't access it.  I phoned nokia helpdesk, and they asked me to backup --->format--->restore, and that didnt help my cause either.  Even if I try to store new contacts to the phone memory.... it foes it successfully, but I just cant pick them up. Can somebldy please advise me on this matter?
    Thank you

    I did the following...
    a)Made a backup to my pc using Nokia PC Suite
    b)formatted the phone(dialed *#7370#)
    c)tried to restore the file, but couldnt, because the phone was probably in a "lost" state and nokia pc suite could not pick the phone up.
    d) Did a hard reset.
    e) phone was visible again
    f) restored the file, but was back at square 1. 
    I am not sure if what you suggesting is the same as what I did above and if ovi suite is anything different from nokia pc suite or if it is the same thing. .  Needless to say though, thanks a million for your input thus far.  Really appreciate it.

  • Firmware update on my Nokia E52 only run java game...

    Hi, I made that day Firmware update on my Nokia E52 and then update-s all right, only run java games and their sound is gone whether he shall be ON. Anybody have a similar problem and a solution for it?? Firmware-v 052.003 but the date is Cot. 29, 2010) will be happy if you give me an idea how to fix it! I tried quite moratoria preinstall, reset backup I have not done, unfortunately the old Firmware.

    Okay, you are using a MacBook so I am not sure how much help I can give since I use a PC with Vista. In the latest version of Ovi Suite, once the update file has been downloaded and the installation starts, the computer will give your prompts that the phone is disconnected via USB, the phone restarts, the screen flashes, etc. I just leave it alone and after the progress bar on the Ovi Suite ends my phone is updated. I currently have v40. The free maps is available only to v31 and above for 5800 if I remember correctly.
    If possible please use the Ovi Suite instead of PC suite (at least in my experience it works better), and do not in any way touch your phone during updates, even if it "disconnects" from the computer.
    However regarding to your query as to why it is not available via the *#0000# method (or FOTA), updates are generally released through NSU before FOTA, sometimes with as much as a month in difference because the files in FOTA are not the entire update file but rather extractions from it. For example, the v40 FOTA is 17mb (according to someone who said he had it already), while the v40 I downloaded through Ovi Suite was 128mb. 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Nokia E52 dead after software update using Nokia S...

    I bought my Nokia E52 the day before yesterday. It is an early model (arrived at the store i September). But it worked fine, except for the bluetooth connection.
    I tried to update the software using Nokia Software Updater via the USB cable. But it lost connection (I didn't touch the cable nor the phone at the time, and the computer was workning fine). After that I tried it again a couple of time, but it lost connection. It seems the USB-micro connecter on the phone is defective. 
    Finally its seemed to worked, but after a long period of time it lost connection again and this time the phone was dead. The computer couldn't find it when I connected the USB cable and the screen was dead, nothing happend when I push the powerbutton, except it vibrated once as normal after that nothing happend.
    The screen was dead, the numberpad was not lighted. I removed the battery and waited a couple of minutes and tried again. Nothing happend. I tried to reset the phone by using buttons '3', '*', 'anwesring-bottun' and powerbutton. Nothing happend.
    Obvious the software update were unsuccesful but is my phone beyond repair? Is the warrenty/guarantee still valid?

    Your phone will be repaired in a nokia care point. Usually they fix this problem whenever it occurs during a software update. If that key combination didn't help in your case, then it's definitely a point to go to a care point. I think it is covered by warantee but I'd advise you to call the service point just in case to check with them.

  • Nokia E52 choppy VoIP due to WLAN interruptions an...

    I love my Nokia E52, but one of the main reasons I bought it (the combination of WiFi Wireless Lan support and fully integrated Voice over IP client) is not usable due to very laggy, unsteady WLAN connection (while having perfect signal strength - E52 shows 100% (same room)).
    Because of this I get choppy VoIP (cracks and interruptions up to several words in my VoIP conversations).
    My E52:
    Software version: 031.012
    Modell: E52-1
    Type: RM-469
    This is not a problem of the VoIP Client, audio-codec, or SIP provider/internet connection.
    It is the Wireless Lan connection between my E52 and my Router. I tried 3 different access points, with and without wireless encryption, 802.11b (1M...11M data-rate) and 802.11g - problem always the same.
    I can track it down by pinging my E52 (idle without any programs running) from my Linux box:
    192.168.0.100 is the IP of my E52 assigned by DHCP.
    1.) 64byte pings, once per second:
    PING 192.168.0.100 (192.168.0.100) 56(84) bytes of data.
    64 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=6.36 ms
    64 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=57.9 ms
    64 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=80.9 ms
    64 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=203 ms
    64 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=128 ms
    64 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=50.0 ms
    64 bytes from 192.168.0.100: icmp_seq=8 ttl=69 time=324 ms
    64 bytes from 192.168.0.100: icmp_seq=9 ttl=69 time=79.7 ms
    64 bytes from 192.168.0.100: icmp_seq=10 ttl=69 time=37.5 ms
    64 bytes from 192.168.0.100: icmp_seq=11 ttl=69 time=60.0 ms
    64byte pings using a good wireless 802.11g connection should be around 1ms and constant!!
    It's not because of bandwith limit of E52 wlan/cpu, because the higher ping times stay the same, even if I increase ping-packet-size 150x:
    2.)10000byte pings (150x times bigger packages!), once per second [still ping times look quite similar]:
    PING 192.168.0.100 (192.168.0.100) 10000(10028) bytes of data.
    10008 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=175 ms
    10008 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=89.8 ms
    10008 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=115 ms
    10008 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=234 ms
    10008 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=153 ms
    10008 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=83.7 ms
    3.) Small 64byte pings, but now ten pings per second:
    Now it gets even more strange:
    # ping 192.168.0.100 -i 0.1
    PING 192.168.0.100 (192.168.0.100) 56(84) bytes of data.
    64 bytes from 192.168.0.100: icmp_seq=1 ttl=69 time=200 ms
    64 bytes from 192.168.0.100: icmp_seq=2 ttl=69 time=95.0 ms
    64 bytes from 192.168.0.100: icmp_seq=3 ttl=69 time=2.25 ms
    64 bytes from 192.168.0.100: icmp_seq=4 ttl=69 time=5.93 ms
    64 bytes from 192.168.0.100: icmp_seq=5 ttl=69 time=4.34 ms
    64 bytes from 192.168.0.100: icmp_seq=6 ttl=69 time=8.45 ms
    64 bytes from 192.168.0.100: icmp_seq=7 ttl=69 time=5.91 ms
    64 bytes from 192.168.0.100: icmp_seq=8 ttl=69 time=2.69 ms
    64 bytes from 192.168.0.100: icmp_seq=9 ttl=69 time=2.31 ms
    64 bytes from 192.168.0.100: icmp_seq=10 ttl=69 time=5.90 ms
    64 bytes from 192.168.0.100: icmp_seq=72 ttl=69 time=8.42 ms
    64 bytes from 192.168.0.100: icmp_seq=73 ttl=69 time=7.25 ms
    64 bytes from 192.168.0.100: icmp_seq=74 ttl=69 time=7.28 ms
    64 bytes from 192.168.0.100: icmp_seq=75 ttl=69 time=7.25 ms
    64 bytes from 192.168.0.100: icmp_seq=76 ttl=69 time=7.24 ms
    64 bytes from 192.168.0.100: icmp_seq=77 ttl=69 time=7.92 ms
    64 bytes from 192.168.0.100: icmp_seq=78 ttl=69 time=7.24 ms
    64 bytes from 192.168.0.100: icmp_seq=79 ttl=69 time=8.69 ms
    64 bytes from 192.168.0.100: icmp_seq=80 ttl=69 time=10.9 ms
    64 bytes from 192.168.0.100: icmp_seq=81 ttl=69 time=10.6 ms
    64 bytes from 192.168.0.100: icmp_seq=150 ttl=69 time=213 ms
    64 bytes from 192.168.0.100: icmp_seq=151 ttl=69 time=105 ms
    64 bytes from 192.168.0.100: icmp_seq=152 ttl=69 time=3.09 ms
    64 bytes from 192.168.0.100: icmp_seq=153 ttl=69 time=2.23 ms
    64 bytes from 192.168.0.100: icmp_seq=154 ttl=69 time=2.14 ms
    64 bytes from 192.168.0.100: icmp_seq=155 ttl=69 time=3.78 ms
    64 bytes from 192.168.0.100: icmp_seq=156 ttl=69 time=3.02 ms
    64 bytes from 192.168.0.100: icmp_seq=157 ttl=69 time=5.48 ms
    64 bytes from 192.168.0.100: icmp_seq=158 ttl=69 time=2.15 ms
    64 bytes from 192.168.0.100: icmp_seq=159 ttl=69 time=2.13 ms
    ^C
    --- 192.168.0.100 ping statistics ---
    159 packets transmitted, 30 received, 81% packet loss, time 16866ms
    rtt min/avg/max/mdev = 2.130/25.327/213.218/54.102 ms, pipe 2
    Note: My Linux Ping Command doesn't say something like "Request timed out." for lost packets (like Windows Ping does). So if there is a jump from icmp_seq=81 to icmp_seq=150 it is because everything in between got lost.
    You see, in 3.) it has the slow pings once in a while and in between almost normally fast pings, but suddenly a long lag of 6-7sec (this is deadly for voip) and then the circle repeats.
    Is my E52 wlan chip defect, or is this some kind of Power-Management system? How can I turn it off?
    I don't need a fast wlan connection on my E52. 1MBit/s is more than enough. But it has to be steady, without lags.
    Ideas, anybody? Please!

    Well, it has nothing to do with the VoIP service itself for sure. As razvan_t has already noted earlier this problem affect all network services like internet radio.
    It behaves exactly as E52affair described in the very first post. If I ping the phone through my home LAN using ping with normal settings, i.e. 1 packet per second nothing much wrong happens. It finishes with some 1% packet loss. But when I increase the ping frequency up to 10 packets/s the same test ends with terrible >80% packet loss as you can see below. And the following pattern can be observed during this test: 10 packets goes through well then some 60-70 packets is lost and it repeats again and again. Lags in VoIP audio stream correspond to the lags in ping. The wifi conditions are excellent, phone is located some 2 meters far from the router´s wifi antenna.
    I tried watch some video on Youtube. The video stream was prefetched in jumps appearing with the same frequency as lags in fast ping were observed during the test.
    Before I found this thread I obviously thought it was a VoIP problem. Therefore I tried various VoIP settings, different codecs, nothing has helped. Now it is clear why.
    I even did a phone hard reset. It did not help neither.
    Because I observe almost the same lags in VoIP even when the phone is connected using the packet data through the GSM network, I suppose the problem is not limited to wifi connection only. But I cannot confirm this theory because I´m not able to ping the phone throughout the GSM data network.
    jirka@pc-jirka:~$ sudo ping 192.168.100.14 -i 0.1
    PING 192.168.100.14 (192.168.100.14) 56(84) bytes of data.
    64 bytes from 192.168.100.14: icmp_req=1 ttl=69 time=64.6 ms
    64 bytes from 192.168.100.14: icmp_req=2 ttl=69 time=7.58 ms
    64 bytes from 192.168.100.14: icmp_req=3 ttl=69 time=7.61 ms
    64 bytes from 192.168.100.14: icmp_req=4 ttl=69 time=7.62 ms
    64 bytes from 192.168.100.14: icmp_req=5 ttl=69 time=4.36 ms
    64 bytes from 192.168.100.14: icmp_req=6 ttl=69 time=7.64 ms
    64 bytes from 192.168.100.14: icmp_req=7 ttl=69 time=7.93 ms
    64 bytes from 192.168.100.14: icmp_req=8 ttl=69 time=7.57 ms
    64 bytes from 192.168.100.14: icmp_req=9 ttl=69 time=7.58 ms
    64 bytes from 192.168.100.14: icmp_req=10 ttl=69 time=7.60 ms
    64 bytes from 192.168.100.14: icmp_req=69 ttl=69 time=568 ms
    64 bytes from 192.168.100.14: icmp_req=70 ttl=69 time=461 ms
    64 bytes from 192.168.100.14: icmp_req=71 ttl=69 time=354 ms
    64 bytes from 192.168.100.14: icmp_req=72 ttl=69 time=248 ms
    64 bytes from 192.168.100.14: icmp_req=73 ttl=69 time=140 ms
    64 bytes from 192.168.100.14: icmp_req=74 ttl=69 time=33.0 ms
    64 bytes from 192.168.100.14: icmp_req=75 ttl=69 time=7.58 ms
    64 bytes from 192.168.100.14: icmp_req=76 ttl=69 time=4.48 ms
    64 bytes from 192.168.100.14: icmp_req=77 ttl=69 time=7.68 ms
    64 bytes from 192.168.100.14: icmp_req=78 ttl=69 time=7.65 ms
    64 bytes from 192.168.100.14: icmp_req=147 ttl=69 time=57.9 ms
    64 bytes from 192.168.100.14: icmp_req=148 ttl=69 time=5.26 ms
    64 bytes from 192.168.100.14: icmp_req=149 ttl=69 time=7.68 ms
    64 bytes from 192.168.100.14: icmp_req=150 ttl=69 time=7.60 ms
    64 bytes from 192.168.100.14: icmp_req=151 ttl=69 time=7.67 ms
    64 bytes from 192.168.100.14: icmp_req=152 ttl=69 time=8.07 ms
    64 bytes from 192.168.100.14: icmp_req=153 ttl=69 time=7.67 ms
    64 bytes from 192.168.100.14: icmp_req=154 ttl=69 time=4.24 ms
    64 bytes from 192.168.100.14: icmp_req=155 ttl=69 time=7.62 ms
    64 bytes from 192.168.100.14: icmp_req=156 ttl=69 time=7.53 ms
    64 bytes from 192.168.100.14: icmp_req=225 ttl=69 time=99.5 ms
    64 bytes from 192.168.100.14: icmp_req=226 ttl=69 time=3.79 ms
    64 bytes from 192.168.100.14: icmp_req=227 ttl=69 time=20.3 ms
    64 bytes from 192.168.100.14: icmp_req=228 ttl=69 time=3.91 ms
    64 bytes from 192.168.100.14: icmp_req=229 ttl=69 time=4.57 ms
    64 bytes from 192.168.100.14: icmp_req=230 ttl=69 time=4.70 ms
    64 bytes from 192.168.100.14: icmp_req=231 ttl=69 time=7.95 ms
    64 bytes from 192.168.100.14: icmp_req=232 ttl=69 time=5.35 ms
    64 bytes from 192.168.100.14: icmp_req=233 ttl=69 time=5.65 ms
    64 bytes from 192.168.100.14: icmp_req=234 ttl=69 time=5.63 ms
    ^C
    --- 192.168.100.14 ping statistics ---
    294 packets transmitted, 40 received, 86% packet loss, time 31394ms
    rtt min/avg/max/mdev = 3.795/56.194/568.719/126.270 ms, pipe 6

  • E52 battery problem!

    Hello!
     Please help me! I buy nokia e52 one year ago...i have battery problem now.i  had original battery,and after 2 days using phone she is empty..i have a new software too on phone,i don't have memory card,i dont'have viruses......then i buy another original battery,couple days ago,and it is same,2 days and she is empty..can you help me please?what is the problem?

    My phone is one week now and yes it get fully charged cycle and turn off when charging thats why i dont know whats the problem. but its already back to normal now because i try to take the battery out and turn back again and the indicator works ok but im still confuse why is that happen.
    NOKIA E52-1
    034.001
    RM-469

Maybe you are looking for

  • Can't remove apple mobile device support. need to for update?

    Every time I plug in my iPhone (3GS or my wife's 4) or my iPad2 I get a message telling me to update Apple mobile devise support and to do so I need to uninstall it and iTunes and reinstall. Windows won't uninstall AMDS. (windows vista) It will unins

  • Socket connection access denied

    I created a class that handles all the socket level calls for my Applet class. When I'm trying to open the socket, I get an exception saying "access denied (java.net.SocketPermission 172.16.11.63:3333 connect,resolve)". When I open the socket within

  • N660 TF 2GD5-OC VBIOS request

    Hello, So I finally bought this graphics card hoping I could use Windows Secure and Fast Boot, but I get an error message that the graphics card is not compatible. Could you plese provide me with a bios that suports UEFI GOP? My serial number is: 602

  • I deleted my photos in my ipad4, any way to get it back?

    I deleted my photos in my ipad4, any way to get it back?

  • TS2529 I can't download games

    I can't download full games what do I do