Nokia Maps 3.0 on 5800 and problem with external G...

Hi,
I have just updated Nokia Maps to version 3.0, but unfortunately, when I try to use an external GPS (as I always did successfully with Nokia Maps 2.0), the menu asking for GPS device association continues to pop-up and it makes Nokia Maps 3.0 completely unusable. Things work fine with the built-in GPS, but I need the external one to save power and in situations that are particularly cumbersome such as among skyscrapers. What should I do? Another thing: I have already a Drive licence, but I cannot see the 3D buildings: what should I do? Thanks!

Hi lorluin
You must have enabled it by going to Settings > Phone > Application Settings > Positioning > Positioning methods and enable "Bluetooth GPS". Does it make any difference if you open GPS Data application and leave it running and then start OVI Maps?
Are you "On" or "Offline" when trying to see 3D buildings?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Hi! Missing disk utility apps and problems with external disc

Hi everybody! after installing snow leopard, as a way to get to lion, I dont have the disk utility apps.
Besides Im having a lot of problems with an external new Toshiba 1T disc that I try to use with Time machine cause I daily receive the OSX msg CANT REPAIR THE DISK REFORMAT IT!
Thanks a lot to all of the community
I do love Apple product. And counting the days for the iOS 6 upgrade!!

hugorodri wrote:
Hi everybody! after installing snow leopard, as a way to get to lion, I dont have the disk utility apps...
Before you go to Lion, just a reminder. I know you recently moved up to Snow Leopard. Be sure that everything you were running in Leopard, and now in SL, will work for you in Lion.
Remember, Rosetta and all PPC apps are gone (Word 2004, some versions of PhotoShop etc) Check the compatibility list before you ditch SL.
As far as your Disk Utility problem, how hard is it to reinstall SL?
I've taken a screen shot of my Utilities folder to show you what you are looking for. The Utilities folder as mentioned above is in the Aplication Folder (or you may have pulled it out to the side bar as well, in which case there will be an icon and the word Utilities in Places in the side bar.
Mrs H

Permissions and problems with external HDD

Starting today I have been unable to copy anything to my 1T Seagate FA GoFlex external HDD. I can access the drive, I can copy files FROM the drive back to my Mac Mini, but I cannot copy anything to the drive. Whenever I try to copy anything I get the error "The operation can’t be completed because an unexpected error occurred (error code -50)." I have spent the last four hours doing an exhaustive search, and have tried every solution I've come.
Somehow, over the last few days, something has happened to change this external HDD--the permissions and possibly the format. I have been in Disk Utility and am unable to repair. I have tried accessing Disk Utility from startup and am unable to repair. I have also copied the content off of the HDD and have tried to reformat the drive, but I'm getting an error when I try this as well.
When I tried to verify the disk I got this error:
When I tried to repair the disk I got this error:
After copying all of the important files to other drives, I attempted to reformat and got this error:
Then I tried the secure option and got this error:
I did notice that when I click on the Erase tab, the format shows as "Mac OS Extended" but when I click on the RAID tab the format shows "Mac OS Extended (Journaled)". Shouldn't these match?
I have been using this external HDD for several years now and have never had a problem. This does coincide with the copying of some .mp3 files. Could this be the culprit? (I was unable to remove one zip folder of these mp3 files.)
The permissions for this external HDD seem out of whack as well:
It states "You can only read" but the admin account "MiniMel (Me)" sholws Read & Write.
I am completely stumped and irritated. Is there any help for this HDD or is it just failing? It was no where near capacity. Could the mp3 files have caused the problem? I think this is unlikely, the the timing is coincidental. Should I worry about this happening to the other external HDD and my HD where I copied the files so I could reformat?
Any and all help is greatly appreciated.

Thank you for your reply.
I tried that last night. When I tried to verify the disk from startup, I received this message:
when I tried to repair the disk I received this message:
After the second message, I moved what I needed off the external HDD and tried to reformat. Which led to the errors in my OP. So frustrating.
Message was edited by: web-betty (replaced screenshots)

Problems with external context mapping

Hi ,
I am having the following problems with external context mapping from one WD component to another.
Problem description:
In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
After i have created the component for the used component I try to fill values in the source node contextB thru this code:
wdContext.currentContextB.setB(value);
But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
Thanks in advance for your help.
Best regards
Sourav

HI,
Valery : I personally checked by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
wdContext.currentParentNodeElement().setFname("Abhijeet");
wdContext.currentParentNodeElement().setLname("M");
i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
if this doesnt solve your problem, please post the expanded exception.
hope it helps
let me know if you face nay problem
regards

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Problem with external punchout in SRM Server 713

Hello,
We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
Our parameters in structure are:
10                     https://xxxxxxxxx                          URL
20 VIEW_ID          NAME                            Fixed value
30 VIEW_PASSWD     XXXXXX               Fixed value
40 USER_ID          SY-UNAME                   SAP field
50 BRANDING      search5                     Fixed value
60 LANGUAGE      ES                           Fixed value
70 COUNTRY      MX                             Fixed value
75 EASYORDER 1                          Fixed value
80 target _top                                  Fixed value
85 ~caller      CTLG                              Fixed value
90 OCI_VERSION     4.0                     Fixed value
91 FILTER                                      Fixed value
92 OPI_VERSION 1.0                     Fixed value
100 HOOK_URL                             return URL
110 returntarget      _top                       Fixed value
we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
Does anyone know what's missing?
Thanks in advance.
Best regards,
José Luis D.

Hello Jason,
Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
Any suggestion?
Thanks in advance, best regards
José Luis D

I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5

Problem with External 2.1 digital speakers

Anybody have any problems with external digital speakers connected to the SPDIF connection? I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers. They worked, but any time a "sound" played, a loud pop would follow the end of the sound track. If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops. It even happens at the endf of music tracks. It was so annoying, I stopped using the speakers. before I invest in another set of speakers, want to know I am not wasting my time.
Also, anyway of getting the soundcard to support digital 2.1 or other sound? The set-up screen only shows stereo for external speakers and no way of adding more.
Sincerely
Scott

pmoney,
If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
Jason

Nokia 5800 Restart Problem with the Memory Card

hi,
i am facing a peculiar problem with my 5800.i hv firmware v21.
Whenever i restart the phone with the sd card inserted (it has around 35+apps/games loaded but 4.3GB of memory is free) ;the phone hangs up at the "nokia" screen & i hv to remove the battery.on ejecting the card & then restarting; the phone starts up fine.on inserting the card later after the restart; it is read without any problems by the phone & all the apps. work fine.i do not hv any apps loaded for start up.
i saw similar problems posted in some other topics for 5800;but could not get a clear idea whether this problem was occuring in other phones as well.Is it firmware related or due to large no. of apps on the phone?
please help.

it is most likely the corrupt memory card issue, it happens quiet often. that is why back up is so essential to have especially of memories and such. for that i use share online and upload my pics right away to ovi or vox whichever.
the programs you bought you should be just able to download once again and plug in the key you have gotten with your applicatioins. you should be able to recover all of your purchases. i am sorry for your pics for those can't be recovered
i always keep a separate email folder for all my application keys so i can find they easily as phones and memory does get corrupt. i can do it relatively quickly and have the info handy even on the go
Message Edited by radical24 on 22-Jul-2009 01:03 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Nokia Cancelled updates for X6, 5800 and 5530

Hi,
Nokia X6, 5800 and 5530 users please Stop dreaming about Updates, Nokia was not updating these devices
Please Check the below Site (Original Blog with nokia anouncement and is edited on 25-Aug-11)
http://www.conversations.nokia.com/2011/06/29/updates-to-symbian-3-2-and-5-0/
Shiva

i think some confusion is there & i request dont jump directly to the conclusion that nokia wont release the update for these models...by striking off these models from the list it means that these models wont receive that particular update which they have mentioned in the blogpost...
Maybe they are going to release a bigger & major firmware for these models...so dont jump the gun & wait for their response....i think Nokia will release the updates as promised cos models like 5230,5233,etc have got the updates then 5530,5800& x6 are more successful models..so i think nokia wont disappoint its large no. of users....
I request Nokia to please come forward & clear the air..

New C6-01 user/phone and problem with backup/resto...

Hello everyone.
I recently purchased a new C6-01 (and first-time Nokia owner) and having trouble with getting maps restored onto a new 32GB uSDHC card and need some help.
It is my understanding that I can backup and restore all my phone contents and settings to a new memory card using Nokia Suite. So what I did is performed a complete backup using Nokia Suite, ejected the old uSD card (that came with the phone), put in the new uSD card that I had purchased and format it, then performed a complete restore to the phone and the new memory card.
During the restore, I saw errors on the phone display that said something like disk write error and gave me the option of stop or retry. I hit the retry a few times and still getting the error. Thinking it may be a bad uSD card, I returned/exchanged for another identical one. With the 2nd new card, I still get the same error message so I rebooted the phone and ran restore again but this time instead of restore everything all at once, I selected a few items at a time and eventually got everything restored, at least without errors this time.
When I ran maps after the restore, it told me that I needed to download the maps, and when I tried to download it thru a WiFi connection (at my house), I keep getting Disk error - cannot complete write. Retry or data will be lost. At this point if I run Files, it will show drive E but not any free space number (and selecting it will show free space not available). A reboot will bring back drive E and show 29.4GB free. So I am completely stumped at this point and believe that for whatever the reason I can not get maps loaded onto a non-Nokia-provided memory card.
I am running Nokia Suite 3.5.34 on WIndows XP w/SP3. The new 32GB uSDHC card is a class 4 card made by Sandisk. The phone is running the Belle Refresh v111.040.1511 dated 7/28/2012. Map version: v3.09 12wk20 b01-MW OpenGL MN-Map version 0.2.46.103
Sorry for the large amount of information posted here, but I wanted to provide enough details for you to look at. Please feel free to ask for more information and thank you in advance for your help.
Bill

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

Tunneling and problem with unknown host exception

hello! i've got a problem with https. i use jdk 1.5.0, jboss-4.0.4.ga-patch1, soap.
and i'm going crasy.. i've testet my client code at our network and it works fine. but if i want to get jobs from the server of our customer, my client throw an "unknown host exception: firm".
i wonder why it hasn't the full host. the url may look like this: https://firm.sub.com:443/ and while the client connects to the server, i depugged it and the host is correct: firm.sub.
but after the connection, when the client want to get something from the server (when it wants to communicate with the server over soap) it crashs.
my client code looks like this:
private ClientInterfaceEndpoint getClientInterface() throws ServiceException {
QName serviceQName = new QName(DOCSERVER_NAMESPACE, CLIENT_INTERFACE_SERVICENAME);
URL wsdlUrl = getClientInterfaceWsdlUrl();
log.info("*******WSDLURL host: " + wsdlUrl.getHost()); // out: firm.sub
log.info("*******WSDLURL port: " + wsdlUrl.getPort()); // out: 443
URL mapping = getClass().getClassLoader().getResource("META-INF/DocumentServer_Mapping.xml");
log.info("*******MappingURL path: " + mapping.getPath());
if (wsdlUrl.toString().toLowerCase().contains("https")) {
if (null == getConfig().getTruststore() || getConfig().getTruststore().equalsIgnoreCase("")) {
throw new RuntimeException("No or incorrect TruststorePath in the docclient-config");
File tmp = new File(getConfig().getTruststore());
if (!tmp.isFile() || !tmp.canRead()) {
throw new RuntimeException("The truststore at the 'TruststorePath' isn't a file or can't be read.");
System.setProperty(SYS_PROPERTY_KEY_TRUST, getConfig().getTruststore());
System.setProperty(SYS_PROPERTY_KEY_TRUST_PW, config.getTruststorePass());
ServiceFactoryImpl factory = null;
factory = (ServiceFactoryImpl) ServiceFactory.newInstance();
Service clientInterfaceService = null;
try {// create the service for the ClientInterface
clientInterfaceService = factory.createService(wsdlUrl, serviceQName, mapping, new URL(config.getServerURL())); //, new URL(config.getServerURL())
log.info("*******ClientInterFaceService WSDL URL Host: " + clientInterfaceService.getWSDLDocumentLocation().getHost()); // out:firm.sub
log.info("*******ClientInterFaceService WSDL URL Port: " + clientInterfaceService.getWSDLDocumentLocation().getPort()); // out: 443
} catch (ServiceException e) {
log.error(e.getMessage());
throw new RuntimeException(e.getMessage());
} catch (MalformedURLException e) {
log.error(e.getMessage());
throw new RuntimeException(e.getMessage());
} catch (Exception e) {
log.error(e.getMessage());
throw new RuntimeException(e.getMessage());
}// getting the ClientInterfaceEndpoint
ClientInterfaceEndpoint clientInterface = (ClientInterfaceEndpoint) clientInterfaceService.getPort(ClientInterfaceEndpoint.class);
return clientInterface;
protected URL getClientInterfaceWsdlUrl() {
URL url = null;
String urlString = getConfig().getServerURL() + CLIENT_INTERFACE_URI + "?wsdl";
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
Properties properties = System.getProperties();
String handlers = System.getProperty(SYS_PROPERTY_KEY_PKGS);
if (handlers == null) {
properties.put(SYS_PROPERTY_KEY_PKGS, SYS_PROPERTY_VALUE_PKGS);
else {
properties.put(SYS_PROPERTY_KEY_PKGS, SYS_PROPERTY_VALUE_PKGS.concat("|").concat(handlers));
try {
url = new URL(urlString);
log.info("*******URL host: " + url.getHost());
log.info("*******URL port: " + url.getPort());
log.info("*******URL path: " + url.getPath());
} catch (MalformedURLException e) {
log.fatal("DocumentProvider SOAP configured incorrectly. DocServer URL malformed: " + urlString);
throw new RuntimeException("DocumentProvider SOAP configured incorrectly. DocServer URL malformed: " + urlString, e);
System.setProperties(properties);
return url;
}if it's usefull: the customer use a apache server (not tomcat) where a the server is and the client at another system the jboss.
The customer told me: if i want to connect the client via http i have to tunnel.. maybe i have to tunnel using https too?
have i to generate the endpoint classes a second time, extra for https?
or doesn't soap like host like "firm.sub"?
can anyone help me please?!
sorry, my english isn't very well...

sorry, it's not the same error. The output is: Unable to connect to any host due to exception: java.net.socket.exception: java.net.socket.exception: Unregcognized windows socket error: 10106: create.

Problem with External HD and Disk Utility

Hi. I'm using OS X Yosemite 10.10.3 on a 15 inch MBP Retina. I've been using my 2TB WD My Passport Ultra hard drive since around February of this year. Earlier today when I plugged it in, the hard drive didn't show up in my devices in finder. So, i unplugged and tried again. Still nothing. Then, I went to Disk Utility and found that the drive was there but the partition wasn't mounted and is greyed out. So i tried to verify / repair the disk but have gotten a couple different messages. One being "The partition map needs to be repaired because there's a problem with the EFI system partition's file system. The other being "Some information was unavailable during an internal lookup". This message has showed up more than any other. I've been able to get in and look at my files once to try to copy the files from the drive after a message popped up and said it "couldn't repair the disk" but i "could still open or copy files on the disk but can't save changes to files on the disk." But I encountered an error that was something along the lines of "Operation couldn't be completed because the item "..." is in use". But the file i was trying to copy wasn't open or in use by any program. SO, I'm in pretty desperate need of some help with this. I have some very important files on this drive that I can't afford to lose. A lot of it irreplaceable. Any help at all would be very much appreciated! Thanks a lot!

I recall that the old imacs could not use a HD over 130G or so unless they are partitioned. So you may need to make three partitions first with your disk utilities. It should format it at the same time.

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Nokia Maps 3.0 on 5800 and problem with external G...

Similar Messages

Maybe you are looking for