Nokia X3 Problem n need Solution

Nokia X3 Problem n need Solution :
the problem is,my nokia X3 ringtone sound so slow/soft...
n the keypad button sound more strong then ringtone sound,n two of them at the full volume...
but,i already put the volume to higher posible ( full volume )..

Some devices may need to have their software reset in order to see the latest benefits, or to resolve other potential problems. - Ensure you have the latest version of Nokia PC Suite. - Backup your device memory to your PC using Nokia PC Suite - Copy your files (music, videos, documents, images etc) from the Nokia N91 hard drive to your PC (use of USB mass storage recommended). - Copy any original SISX, Java, etc. installation files for your applications, themes, etc. from your Nokia N91 hard drive or memory card to your PC. (Do not simply copy over the installed directories/files.) - If your device has an internal hard drive, format your Nokia device’s hard drive by selecting Tools > Hard drive > Options > Format hard drive > Quick format (instructions are also in user the guide). - After the device has completely started up again, reset your device memory by selecting Menu > Tools > Settings > Phone > General > Orig. Phone Settings and entering 12345. - Restore your device memory from your PC using Nokia PC Suite by selecting Backup from the PC Suite menu and then selecting Restore. - Copy any hard drive or memory card contents from your memory card or PC back to your clean hard drive or memory card. - Re-install your applications/themes. If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Mail corruption and system problems. Need solution.

The problems I am having:
1) Mail will not open. It hangs, shows beach ball and stays that way. All you see is the menu-bar. Force quit will not work. Only hard reset. Activity Monitor shows the app sucking up 87-95% of processor.
2) System preferences are not staying. Specifically my mouse preferences for scrolling, keyboard illumination, Safari address bar buttons. This gets worse if I have to do a hard reset if Mail gets launched. It can clean the whole system prefs. sometimes.
Let me start from the beginning of the problem:
I was on a website for a real estate company. It uses an active server application that never works right with a Mac. I almost always use Safari for it. What happens is that the sever app. usually hangs and won't go to the next page. I've tried all my browsers except Opera, so, I figure I would give that a go and see if it's better. BAD IDEA! Opera 8.6 hung. It wouldn't force quit. I had to do a hard reset like , 5 times, before it would restart. After that happened is when things got bad. My system prefs. were all gone. I had to reset all that. And then, Mail just went t1t5 up. It did what I said above. Hung. So I had to figure out how I was gonna get all my mail over into Thunderbird. I backed up the HD, and luckily, through Apple forums and Google, came up with the .emlx to .mbox converter. Tedious but worked. I deleted Opera off my HD as well as Mail. I am not even gonna bother with Mail again after having to deal with Apple's stupid file format and having no way to import a back-up. Thunderbird is way better and PGP actually works on it. Scr3w Opera as well.
At this point, my biggest problem I have is that my system prefs don't always seem to stick. I need to find out which files are associated with this and fix it. I am also paranoid that something got backdoored on my system and is causing havoc. Although I doubt this happened, I would like to see if someone can look at my processes and see if anything looks abnormal. All these problems have happened with my standard account with no Admin privileges ( unless I type in the Authorization on a per instance event). My Admin account is not having problems and my other standard account is OK. So I am pretty sure it's a local problem and not associated with root.
Anyone knowledgeable with some good ideas would be appreciated. I almost never have problems. I'm kinda p155ed this happened. Luckily I could still do a back-up and was not in a recording session or anything.
You can download my Processes List in PDF at this address:
http://badapplestudio.com/actmonscreen.pdf
Sorry for the long description and listing it as a Mail problem( which it kinda is), but there are a lot of factors that lead up to this.
Thanks,
~sKot
1.67 G4 Pbook , 500 G4 Pbook,Dual 2.7 G5 Tower Mac OS X (10.4.7) Also Dell P4 for Gigasampler

Verify/repair your disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
If Disk Utility reports problems it cannot fix, even when starting up from a different disk, read the Disk Utility cannot repair the disk section of the following article for additional guidance and links to more powerful (third-party, not free) disk utilities:
Resolving Disk, Permission, and Cache Corruption
Post back with your observations.

Noob problem. Need solution

Hi,
I am new with Crystal Reports. I have been asked to resolve an issue that affects ALL of our users. When the user views a report, there will be a database login screen asking for login/pass for the ODBC database. ALL the users have the SAME password. Here is the screen that always pops up:
[http://i146.photobucket.com/albums/r261/mikedavid00/ScreenHunter_02Oct131121.gif|http://i146.photobucket.com/albums/r261/mikedavid00/ScreenHunter_02Oct131121.gif]
Once the person enters the correct info, it will show the report as usual.
Is there any way to get rid of this?

I guess we're having a bit of mis-communication here.
We are a huge, national Frobes 50 company that you all know and love. I wouldn't be surprised if we are amongst SAP's largest clients.
But we are in the real world. In the real world, there is no such thing as some BOE administrator. That is just a small portion of one persons job and does not consist of anyone's daily tasks.
In the real world, there is not reports with ODBC connections showcasing peoples salaries. We have payroll departments with specialized payroll software that handles that. The fact you suggested there are reports shows you may not have experience in the 'real world'.
In the real world, it is NOT acceptable to have a login for InfoView, and then bother and confuse the user for another separate login for the actual ODBC connection to the end user. This might make sense in the world of academia, but again, I am asking you from the real world and we need this issue resolved before we contact your 'support' and escalate a complaint.
In Microsoft Reporting Services it is simple. The login and password to enter the db is saved directly on the online report on the website. After all, it's the online web based report that is accessing the database, NOT THE USER. Please see the picture below as proof:
http://www.databasejournal.com/img/DJ_RS006-031.jpg
So again, I have a hard time believing that it's a normal part of operation of have the actual USER prompted for the login and password for the ODBC connection. Again we're in the real world and prompting for passwords is a silly waste of our time and generates needles calls to our help desk.
Do I need to create a DSN string with a login and password embedded when making the report?
Please help.

Nokia 6111 Problem (HELP NEEDED BADLY)

hi, i just ordered and recieved this phone, and i put in the sim card at everything seems to be working just right. but i notced that no matter were i am i dont get any cell phone reception? im in a good area that has great cell phone reception. Is their any way for me to fix this? ohh and my cell phone provider is Cellone wich was bought out by AT&T

as mentioned most ebay phones from far east end up being fake, but as it's a 6111 it may jst be a damaged antenna problem, best thing to do is take it up with the seller, if you have no luck with them, then log a dispute.
if you dont mind can you post the ebay link to the listing for this phone or the sellers name?
Blackberry Bold

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

Help nokia 5800 problem

help radio for my Nokia 5800 is not working and the whole first page is not working (the two bottoms on the screen. the contact and dailer.)
Solved!
Go to Solution.

This is a hardware problem, you need to take the phone to a Nokia Care Point !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Adobe Audition has encountered a problem and needs to close.

I have been using Audition 2.0 on this computer for quite some time and suddenly now when I open it, I get the cryptic error dialogue:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here."
When I click for more information, it's something useless like:
AppName: audition.exe AppVer: 2.0.5306.2 ModName: unknown
ModVer: 0.0.0.0 Offset: 65726168
Nothing on my computer has changed. There are no viruses. I have not added any new audio plug-ins. I am completely up to date with all critical Windows XP SP3 updates and none have been downloaded and installed recently anyway.
I searched the knowledgebase and found a document that suggesting many things to try. I tried them all, including running the Windows hard disk "check disk" tool with options to fix file system errors and recover bad sectors. I also defragmented the hard drive. Lastly, I completely uninstalled Audition, then manually deleted any remaining files, including registry entries as suggested in another knowledgebase article.
I then re-installed Audition 2.0 and it did exactly the same thing! This it maddening. Now it gets even more interesting. I discovered that if I start up the
Adobe ExtendScript Toolkit that Adobe Audition installed also, then try to launch Audition from the toolkit, IT STARTS CORRECTLY! I can then close the toolkit and use it like normal. Weird work-around.
What the heck could possibly be going on? Anyone have any ideas? I've attached the error log file that is generated by the error but I doubt it will be of much help.
Thanks!
Steve in Chicago

stevefoobar2: I may have found a solution for you.
I had the same thing happen to me today. I was using Audition 2 this morning without any problems. But this afternoon, it started giving me the exact same error with no apparent reason. Nothing on my system had changed.
So I uninstalled it and installed Audition 3 in its place. Audition 3 continued to have the same problem that Audition 2 had, so we can assume that this is not something that was changed between versions.
But my attention was brought to the fact that you and I are both running Windows XP SP3 fully up-to-date. So I thought I'd try seeing it from the angle of a problem with Windows instead of Audition, and see if I didn't get a better result -
First, I logged on to Windows as Administrator. This may or may not be required, but you'll probably want to do it just in case (you'll see what I mean later). At this point, Audition still crashed the same way when I opened it, so I moved on to my next troubleshooting strategy -
Instead of opening Audition directly, I right-clicked the Audition icon and selected "Run as..." This may seem odd since I was already logged in as Administrator, but it proved to be the solution in my case.
In the "Run As" diolog, there are two main options: run as current user, or run as another user.
Since I was already logged in as Administrator, I could safely select the first option (run as current user). But here's the catch: selecting the first option allowed me to UNcheck the box underneath that says "Protect my computer and data from unauthorized program activity" (see the attached picture)
Audition opened without any problems when I did this.
This makes me think that one of the Windows security features suddenly decided to block something that Audition was trying to do, crashing the program in the process. By turning off this security feature, the problem was solved. And I only had to do it once. Every time afterwards, Audition has opened without any problems when I simply open it from my desktop. Perhaps Windows now remembers not to block Audition in the future.
However, I have not restarted my computer yet, or logged off as Administrator. You may need to tweak this solution if you plan to do either of these things. You may end up having to "Run as" Audition every time you restart your computer or log off. You may even need to select the SECOND option, and run the program as Administrator with the appropriate password.
Anyway, this was the only post I could find on Adobe.com concerning this problem, so I thought I'd post my solution in case it helped someone else.

Photoshop has encountered a problem and needs to close

I have had the cs4 software about three weeks, Everything has been running perfectly un til this morning. I was attempting to past an image to a vanishing point and got the hourglass/ spinning circle that is was working, then an error message about memory and photoshop needs to close. I closed all other programs and rebooted to attempt to correct whatever issue it had. Now whenever i try to use the program it lags badly with the simplest of tools(quick select) and then i get the photoshop has encountered a problem and needs to close. I am running windows 7, 3GB ram 2.75 usable, anthalon amd 2 dual core m300 2ghz 64 bit,
AMD M880G with ATI Mobility Radeon HD 4200
Can someone please help me figure out how to fix this.

Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9

Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience. Error Code: c0000005 Address: 76f73ac3 I clicked on the OK button and the downloader closed. I then tried to download from the organizer. I

Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Code: c0000005
Address: 75e32f71
I clicked on the OK button and the downloader closed.
I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
I don't even have the Camera hooked up and I get this error on download. I redownloaded everything and reinstalled. I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work. I tried support and they wouldn't help because I bought it in March this year. Pretty frustrating as I have re-purchased Elements about every 2 years. I think I might need a new CODEC? I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

I finally found that it was missing a picture so the Catalog was "corrupted". I just deleted the picture and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe . Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old but they still don't support it on errors. Only install errors!
I have upgrade and repurchase this product 4 times now. I will find something else next time!

Adobe RoboHelp 8 has encountered a problem and needs to close.

I am trying to generate a project as WebHelp and after about 10 minutes of generating, the following error message appears: "Adobe RoboHelp 8 has encountered a problem and needs to close."
I am able to generate all other projects, just not this project.
This project is not on the network. It used to be on the network, but I moved it to my local directory awhile ago.
I tried restarting the computer. I tried generating from another computer and that did not work either.
I tried repairing the CPD through Microsoft Access. (I am not able to rename the CPD, because when I do that, almost all of my topics appear as broken links, so I use Microsoft Access to repair the CPD instead).
Is there anything else I can check or try?
Thanks,
Debbie

Thanks. I didn't see anything in the .HHP.
However, I think I'm getting closer to finding the solution (at least I
think I've found the problem).
I have various conditional tags. One is called "uni2" and one is called
"Remove_in_uni2".
When I generate with "uni2" excluded and "Remove_in_uni2" included, the
WebHelp generates.
When I switch them ("Remove_in_uni2" excluded and "uni2" included), then I
get the error.
I tried removing the underscores - didn't work.
I tried renaming it to RemoveIn18 - didn't work.
Any suggestions, anyone?
Thanks,
Debbie
                                                                                From:       Peter Grainge <[email protected]>
To:         Debbie Sarig <[email protected]>
Date:       06/18/2009 09:06 AM
Subject:    Adobe RoboHelp 8 has encountered a problem and needs to close.
The CPD is created from RoboHelp's internal files so a repair will not
necessarily fix the issue as Access will not know what to look for. A
rebuild is what is needed and it should not result in the broken links you
are seeing. However, that can happen and I have seen it. After repairing
the links, I had no further problems. Try generating a CHM first as if that
will create, it may make changes to the HHP that prevent the broken links.
Also take a look in the HHP for any obvious path errors.
Do you have many folders in the project? If not, creating a new project
should not be too painful as you can import all the topics in a folder in
one hit.
See http://www.grainge.org for RoboHelp and Authoring tips

Oracle Forms Designer has encountered a problem and needs to close

Dear All,
I got the following error when I compile the form,
Oracle Forms Designer has encountered a problem and needs to close
I am using Oracle 10g Developer suite(Forms 32 Bit Version 10.1.2.0.2)
and Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
and Window Xp Professional 32 Bit Operating system
Now I can't do any changes in the form.
I searched lot of oracle forums .but i can't solve it.
Please give me one solution
I am strugling this issue.
Please help me........
a lot of thanks in advance.
Thanks and Regards,
Fazil

Hi,
I am doing the bug fixing in the existing form.Its size is 4.07 MB.when i will get the mentioned error.then i will take previos fmb.then again doing the changes after some time agin will come the mention error.I added some if else condtion code.Its a small code.I think its not a reason for the mentioned error.I think something is happended.I don't know what happened?
Please help me..
Thanks and Regards,
Fazil

Adobe Reader want open - 'Adobe Reader 9.4 has encountered a problem and needs to close'

Hello,
Idesperatelly need a help with this. Adobe Reader simply can't open and I have over and over the same information 'Adobe Reader 9.4 has encountered a problem and needs to close.' Obviously there is error raport created for this problem and the help I have from Microsoft is absolutelly useless. I already uninstall all acrobate and adobe programs and install adobe reader again, but nothing change. Now I stuck with some different program as temporary solution and no solution for this problem. Please if anybody have idea how to solve it... Pls heeelp!!!!

After 3 uninstall's and 3re-installs for AR 9.4 and no solutions forthcoming from the AR tech's/personnel, I have decided to go with another PDF reader that seems to be working fine. Please remove me from your e-mail listing. I tried but not successful as I still receive mail from Adobe about problems not even related to mine. During my search at adobe, I found many users with the same problem but no fix available. You would think that a update correcting these product would be in order. So again, remove me from the AR e-mail list. TU

Adobe reader 9.1 has encountered a problem and needs to close

How many other ADOBE subscribers have suffered the same frustrations as we have?
Over the last 4 days and numerous hours of frustration installing and uninstalling ADOBE 9.1 [and 7.1 and 8.1.3] to resolve the unknown cause of the current Adobe message - ."Adobe reader 9.1 has encountered a problem and needs to close" ..... without identifying the problem..... or its' cause.
Numerous error reports were forwarded to Adobe, but without response!
Unable to converse/communicate with anyone at Adobe Technical Support, it was suggested that we review Adobe Forums to see if anyone else was having similar UNKNOWN problems. Sure enough we found many subscribers [probably hundreds] suffering the same frustrations during the downloading of 9.1 upgrade AND former upgrades. We also found a band-aid solution to the UNLNOWN Adobe problem - at the suggestion of others we created and logged into a new account - a nuisance, but it works..... so far!
It makes you wonder if ADOBE ever reads what's going on. If they did, perhaps they good avert the problem/s and prevent service/subscriber discontent.
We certainly don't intend to ever download another Adobe upgrade!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The "Adobe Reader X.x has encountered a problem and needs to close" has been up very many times and a variety of solutions has been suggested.
(If necessary to do a re-install then un-install and turn off protection-programs + re-boot - check the stayed turned off - before re-installing !)
Here is some of the suggestions :
Log into a new user account :
http://forums.adobe.com/thread/392933?start=23&tstart=0
http://forums.adobe.com/thread/392933?start=17&tstart=0
http://kb.adobe.com/selfservice/viewContent.do?externalId=329444&sliceId=1
Change compatability tab settings :
http://forums.adobe.com/thread/392933#1775578
http://kb.adobe.com/selfservice/viewContent.do?externalId=330028
Accept license agreement (!!!???) :
http://forums.adobe.com/thread/392933?start=29&tstart=0
http://forums.adobe.com/thread/392933?start=34&tstart=0
Permissions problem :
http://forums.adobe.com/thread/392933?start=27&tstart=0
Clean-up you temp directory :
http://forums.adobe.com/thread/392933?start=24&tstart=0
Regards
Fiat Lux !

I have constant K8N Neo2 problems advice needed. (long) Update

I need some advice on what my problem might be and if I need to RMA the motherboard or power supply.
I have a new Athlon 64 3500+ processor, MSI K8N Neo2 Platinum BIOS v1.3 motherboard, with 2 512MB DIMMs of Corsair Value Select Memory. I have had and am still having a series of crashes and lock-ups I will list below. FULL SYSTEM SPECS BELOW AT BOTTOM.
I initially installed the motherboard with a SINGLE 120GB hard drive from the old machine and the installed the memory in memory slots 1 & 2 to try dual channel memory mode. I then formatted the C partition and did a clean install of Windows XP Professional with SP2, installed the MSI drivers on the installation CD that came with the motherboard (Nvidia nForce3 Version 5.03 System Drivers, Realtek gigabit ethernet driver, Realtek AC97 audio driver) & the GeForce v66.93 video driver. I then got my first blue screen "MACHINE_CHECK_EXCEPTION" crash, I ignored this crash and rebooted. I shortly got a black screen crash which I also ignored.
I then installed a new 200GB hard drive and a old 120GB so I could transfer the data from the old 120GB to the new 200GB drive. The data transfer went fine. As I was preparing to install some applications I then got my second blue screen "MACHINE_CHECK_EXCEPTION" crash. Suspecting the Corsair Value Select Memory could not handle dual channel I ran Memtest-86 for 2 passes and got NO errors with the memory in dual channel mode, so I left it.
With my data backed up on the 200GB new drive I removed the new 200GB and the second 120GB hard did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver from the motherboard installation CD & the GeForce v66.93 video driver. I downloaded the latest version of Core Center and installed it and got it working. CPU temperatures were showing a low of around 29C, average of about 44C, and spikes at full loads of about 55-57C. I then ran Ghost to back up the boot partition. I installed all my applications, reinstalled the 200GB and 120 GB hard drives moved some data around with no crashes.
I then installed Rome Total War and played for about 2 hours and had one black screen crash after the reboot played for 4 more hours with no problems so I shut down and went to bed.
In the morning I got up started the computer let it run for awhile the CPU temperatures were in the low 30Cs to low 40Cs I tried to copy some files from the D partition to desktop and the screen freezes I waited about 5 min. with no change and no drive light activity so I hit the reset button. Upon reboot I got a ‘no system disk found” error, I went into the BIOS and checked the drive set-ups and boot priority, everything was correct. I tried for a half hour to get the system to boot with on luck. I used the Ghost to restore the partition image I had made earlier and still no boot. I finally decided to reinstall XP again put in the installation CD and when I got to the screen where you decide where to install Windows I changed my mind quit and bingo the machine boots into the restored Ghost partition???? I started to reinstall my applications got one more blue screen"MACHINE_CHECK_EXCEPTION" crash and another screen freeze that I had to reset.
So I decided to start from real scratch I removed the new 200GB and the second 120GB hard drive ran Killdisk on the boot drive, made a new clean 20GB C partition and did another clean install of Windows XP Professional with SP2, this time with Nvidia’s nForce3 Version 5.10 system drivers, the Realtek gigabit ethernet driver and Realtek AC97 audio driver from the motherboard installation CD & the GeForce v66.93 video driver. I installed the latest version of Core Center and installed it and got it working. CPU temps were as before.
I tested the memory with Memtest-86 again 2 passes no errors. Just in case I then moved one of the memory DIMMs to memory slot 3 out of dual channel mode and to a slower speed and ran Memtest-86 for about 20 hours with 21 passes with no memory errors, so I think memory can be ruled out as the problem.
Next I installed my applications I got one screen freeze that I had to reset. I reinstalled the other 200GB and 120GB hard drives. After I got all my applications install and Ghosted the boot partition. I have had one more one screen freeze that I had to reset.
I have a problem I simply cannot figure out. The memory is obliviously fine. While I have seen CPU temperatures spikes as high as 57C the CPU temps as reported by Core Center averages in the high 30Cs or low 40Cs and most of crashes/lock-ups don’t seem to occur during high CPU load/temp. The power supply might be a little light for the system but many of the crashes have occurred with only one hard drive in the system. The fact after one for the lock-ups the system would not boot for awhile and then magically just booted gives me concern there might be a motherboard problem.
Any solution ideas would be appreciated. Should I RMA the power supply, the motherboard, or both.
Full system specs:
Processor: AMD Athlon 64 3500+, Socket 939, 0.13 Micron, with retail heatsink and fan.
Motherboard: MSI K8N Neo2 Platinum BIOS v1.3
Memory: Corsair VS1GBKIT400 1GB (2 x 512MB DIMMs) Kit DDR400 PC3200 CAS2.5 Value Select Memory - one 512MB DIMM in memory slot 1 and one 512MB DIMM in memory slot 3 running at DDR333 speed.
Video Card: Chaintech GeForce4 Ti 4600
Drives:
Maxtor 6Y120L0 120GB hard drive as master on IDE channel 1. 3 partitions C (boot partition), D, & E.
Seagate ST3200822A 200GB hard drive as slave on IDE channel 1. Single partition.
Maxtor 6Y120L0 120GB hard drive as master on IDE channel 2. Single partition.
Sony DRU-500AX DVD-RW as slave on IDE channel 2.
SATA disabled in BIOS.
No PCI cards.
Case: Antec SX 835
4 80mm case fans (2 fans in front blowing in, 2 fans in rear of case blowing out).
Power Supply: Thermaltake W0008RUC Silent PurePower 420W w/Active PFC
Power Supply Specifications:
Maximum Power: 420W
PFC: Acitve
Power Good Signal: 100-500ms
Hold-up Time: > 16ms at Full Load
Efficiency: > 65%
Over Voltage Protection: +5V trip pointInput Voltage: 100 VAC / 240 VAC
Input Frequency Range: 47-63 Hz
Input Current: 8.0A
Output: +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A

Quote
I then installed Rome Total War and played for about 2 hours and had one black screen crash
Great isn't it (although not without the occasional crash)
Would you say it's better but not there yet ? or the same ?
I thought the same as Ibn Quote
Your PS unit is a little weak for that much hardware, but I doubt thats your problem as well
re your PSU, given youv'e got a less hungry Graphic Card, thought it was at worse marginal, have seen worse.
To investigate further it may be worth diconnecting one of your HD, maybe the 200gb for a time.
It's a small thing but it may be slightly better to have both your maxtors together on IDE channel 1, given their identical.
good luck - keeo us posted

"iTunes has encountered a problem and needs to close. We are sorry for the

HI all
I've got know this problem:
""iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." With the option to send error report or don't send.
and the error signature is:AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 01a21040
Does anyone know what should i do?
Thanks
Wouiners

I had the same issue. I found a solution under a different thread posted by scubastevee32. It worked for me. I copied pasted his solution below.
after countless hours of dead ends.... I found this to fix the problem(thank you "b noir")
hat one could be being caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
so let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
HP Pavilion Windows XP Pro

Nokia X3 Problem n need Solution

Similar Messages

Maybe you are looking for