Nokia5300 i hear myself and caller doesn't hear me

Hi,
I had had a problem with upper keyboard so I changed the stick to new one. After that keyboard started to work, but somethings happend with mic. I hear myself (like echo) but caller doesn't hear me.

that cant be discussed here on mending self fixes you should of came here first to start with and its obvious whats wrong and where it went wrong .
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Caller doesn't hear a ring back if the call is ringing on agent phone

Hi team,
can anybody help me? Here in Germany there are a lot of customers that don't understand why the caller doesn't hear a ring back when the call is ringing on agent phone for instance with UCCX 8. I read some discussions here for that issue but the only solution for that should be to change the MOH on CUCM. This is not a very good solution when the call in queue is set to hold he will hear the ring back tone in the queue as well :-(
Has anybody another solution for that issue???
All the discussion I've read was for IPCC version 4 or so. Is there another solution for this issue in version 8.x
In one discussion I found the following solution:
Yes, To resolve this issue,Set up a Send H225 User Info Message service parameter for Cisco CallManager service in CallManager. Perform the following steps:
In Cisco CallManager Administration, select Service > Service Parameter.
Select the correct server from the drop-down list.
Set the service to Cisco CallManager.
In the Send H225 User Info Message field, under the Cluster Wide Parameters (Device - H323) section, select H225 Info for Ring Back.
Reset the H.323 voice gateway.
After completing this procedure, the caller hears ring back when the agent phone is ringing.
Does it realy work?
Need you help!
Thanks in advance.
Tobias

Hi Tobais
you right one of the solutions is to change the MOH to the ring back one
however there are two types of MOH that you need to select
use MOH is the music to be played while the call on hold/ in queue
use Network MOH which is the oneyou need to change to the ring back MOH source file so when the call get transferred to an agent ring back MOH will be played
these options under the CTI ports in UCCX
also you can search the forum here and there are many discussions about this topic
HTH
if helpful Rate

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

HT201304 I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

Take it up with the app developer first. If they won't respond then you can take it up with iTunes support.
http://www.apple.com/support/itunes/contact/

My iphone screen is not visible - i can hear texts and calls, but cannot access them

I have an iphone 4s and I am not able to see the screen - it's blank, however, I can hear when I receive a text and call.

no you cant

My Ipod Froze And It Froze On Pandora And I Can Hear Pandora But I Click The Home Button And It Doesn't Work? Help Me

My Ipod Froze And It Froze On Pandora And I Can Hear Pandora But I Click The Home Button And It Doesn't Work? Help Me

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

After the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation

after the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation

Try opening iTunes while holding down the option key. When you get a dialog box with "create a new library" or "choose a library", select the choose option and navigate to the library on your external HD.
BTW: If your external HD is not powered on and mounted before opening itunes, iTunes will create a new blank library.

My iPhone 4 shut down randomly and the lock button is broken, it has happened before but I just called myself and it turned on. It also wont charge or connect to my computer, how do I restart it?

My iPhone 4 shut down randomly and the lock button is broken, it has happened before but I just called myself and it turned on. It also wont charge or connect to my computer, how do I restart it?

Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I can see myself and hear the other person while attempting to connect to face time but cannot see them

New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

Hello Wollyt
Check out the article below for troubleshooting FaceTime issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Can not hear the voice of caller and caller can not listen me

hi
i got iphone 4 can not hear the voice of caller and caller can not hear me while head phone and i pod working perfectly.

You may try using a different headphone to isolate the issue. And test your headphone as well with a different device like an iPod or other device, if it works then it's with the phone, that may needs service

MacBook doesn't turns into sleep mode and swop doesn't work.

MacBook doesn't turns into sleep mode and swop doesn't work.
Can you help me please. I have a MacBook Pro 8.2. I reinstalled OS X to make swop file working, but it still doesn't work. I reinstalled OS X from Internet recovery.
Start time: 10:31:02 03/15/15
Model Identifier: MacBookPro8,2
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 3 minutes
Memory
    BANK 0/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
    BANK 1/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
SerialATA
   TOSHIBA MK5065GSXF
Diagnostic reports
   2015-03-15 Boom 2 crash
   2015-03-15 com.apple.internetaccounts crash
Log
   Mar 15 10:26:10 memorystatus_thread: idle exiting pid 546 [tccd]
   Mar 15 10:26:11 memorystatus_thread: idle exiting pid 547 [nsurlstoraged]
   Mar 15 10:26:12 memorystatus_thread: idle exiting pid 544 [soagent]
   Mar 15 10:26:13 memorystatus_thread: idle exiting pid 548 [nsurlstoraged]
   Mar 15 10:26:43 memorystatus_thread: idle exiting pid 556 [com.apple.CodeSi]
   Mar 15 10:26:44 memorystatus_thread: idle exiting pid 558 [accountsd]
   Mar 15 10:26:45 memorystatus_thread: idle exiting pid 553 [com.apple.iCloud]
   Mar 15 10:26:46 memorystatus_thread: idle exiting pid 561 [networkd_privile]
   Mar 15 10:26:47 memorystatus_thread: idle exiting pid 555 [secinitd]
   Mar 15 10:26:48 memorystatus_thread: idle exiting pid 560 [tccd]
   Mar 15 10:26:49 memorystatus_thread: idle exiting pid 562 [secd]
   Mar 15 10:26:50 memorystatus_thread: idle exiting pid 554 [com.apple.intern]
   Mar 15 10:26:51 memorystatus_thread: idle exiting pid 565 [nsurlstoraged]
   Mar 15 10:26:52 memorystatus_thread: idle exiting pid 563 [soagent]
   Mar 15 10:26:53 memorystatus_thread: idle exiting pid 551 [syncdefaultsd]
   Mar 15 10:26:54 memorystatus_thread: idle exiting pid 557 [CoreServicesUIAg]
   Mar 15 10:26:55 memorystatus_thread: idle exiting pid 567 [iconservicesd]
   Mar 15 10:26:56 memorystatus_thread: idle exiting pid 566 [iconservicesagen]
   Mar 15 10:26:57 memorystatus_thread: idle exiting pid 568 [systemstatsd]
   Mar 15 10:26:58 memorystatus_thread: idle exiting pid 550 [cfprefsd]
   Mar 15 10:26:59 memorystatus_thread: idle exiting pid 552 [cfprefsd]
   Mar 15 10:27:00 memorystatus_thread: idle exiting pid 549 [coreduetd]
   Mar 15 10:27:01 memorystatus_thread: idle exiting pid 564 [nsurlstoraged]
   Mar 15 10:28:18 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Mar 15 10:29:09 proc 316: load code signature error 4 for file "Boom 2"
I/O per process: coresymbolicati (UID 0) is using 15 MB/s
kexts
   com.globaldelight.driver.Boom2Device (1.1)
Daemons
   com.apple.installer.osmessagetracing
Agents
   com.apple.AirPortBaseStationAgent
   com.globaldelight.Boom2Daemon
Extensions
   /Library/Extensions/Boom2Device.kext
   - com.globaldelight.driver.Boom2Device
   /System/Library/Extensions/EPSONUSBPrintClass.kext
   - com.epson.print.kext.USBPrintClass
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
Applications
   /Applications/Boom 2.app
   - com.globaldelight.Boom2
   /Applications/Boom 2.app/Contents/Library/LoginItems/Boom2Daemon.app
   - null
Bundles
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkIOM.plugin
   - jp.co.Canon.ij.print.iom.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkPBM.plugin
   - jp.co.Canon.ij.print.pbm.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBIOM.plugin
   - jp.co.canon.bj.print.bjusbiom
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBPBM.plugin
   - jp.co.canon.bj.print.pbm.USB
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver2.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver2
   /Library/Printers/Canon/BJPrinter/Plugins/IJBluetooth/IJBluetoothIOM.plugin
   - jp.co.canon.ij.print.ijbluetoothiom
   /Library/Printers/EPSON/CIOSupport/CIOHelper.plugin
   - com.epson.print.plugin.CIOHelper
   /Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin
   - com.epson.print.plugin.USBPrintClass
   /Library/Printers/EPSON/CIOSupport/XIOP.plugin
   - com.epson.print.plugin.XIOP
   /Library/Printers/EPSON/CIOSupport/XIORemoteClient.plugin
   - com.epson.print.plugin.XIORemoteClient
   /Library/Printers/EPSON/CIOSupport/XIORemoteServer.plugin
   - com.epson.print.plugin.XIORemoteServer
Restricted files: 219
Elapsed time (s): 238

Remove "Boom" and test.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Array of objects in class private data and calling overridden VIs on these objects?

Hello
I am developing part of an application using the actor framework and have run into problems.
I have a several actors and will try briefly describe them and their intended functionality. All actors are started by a Controller actor and in the actor core for the controller I have the possibility to do a lot of intiliazation etc.
Logger:
Has a message (Send Log Message) that other actors can use to write to the log. It is supposed to take a string input and a log level (error, warning, debug etc). This message chain sends data to the actor core with a user event.
The Actor Core of Logger is supposed to save the incoming message to a log, but should be able to do it in several different ways (file, database, email or whatever).
Logger Output:
Abstract class that has a dynamic dispatch vi called "Write Output" that all it's children are supposed to overwrite.
Logger Output File
Child of Logger Output and overwrites "Write Output" to save the string to a file on disk.
Problem:
I want to be able to set up the actor core for Logger once and for all but still be able to create new children of "Logger Output" and have them be handled in the Logger actor core.
My idea was to have Logger use an array of objects as private data and initialize this array in the Controller actor core.
In the logger actor core I could then auto index the array and use each element (each Logger Output child) and the abstract "Write Output" vi to get the correct functionality.
HOWEVER, I cannot get this to work properly and I think I have misunderstood something or stared myself blind on this problem. I have tried 3 different methods when it comes to private data for Logger.
1. Labview Object
2. Array of Labview Object
3. Array of Logger Output Object
Of these 3 methods, I can only get the first one to work and that doesn't accomplish what I want in the end (being able to add more classes without changing private data / actor core for Logger).
I have included 3 screenshots that show snippets of 2 of the actor cores and the private data. File names should correspond to my description above.
The screenshot "Logger actor core.png" shows a very fast test of the 3 different methods I described above. Each of the 3 tunnel inputs to the event structure can be wired to the "Reference" input of "To More Specific Class", but only method 1 (Labview Object) works.
If you need additional information / screenshots or whatever please ask.
Thanks in advance
Attachments:
Logger ctl.PNG ‏8 KB
Logger actor core.PNG ‏25 KB
Controller Actor Core.PNG ‏11 KB

Thanks for the reply and sorry for the confusing OP. It was meant as a quick test and a way to skip making 10+ screenshots .
I updated the actor core for the Controller and Logger to be less confusing (hopefully) and attached 2 screenshots.
I agree with you that it would be a good idea to make a message for the controller that can launch new children of the L" abstract actor, but for these tests I have just launched it the easy way (dragging it to the controller actor core).
Both Logger Output and Logger Output File are actors and in Logger Output there is a dynamic dispatch vi called Write Output that I want to override in all its children.
The problem is when I run the actor core of Logger (see the screenshot) only the abstract version (the one in Logger Output) of Write Output is executed, not the overridden version from Logger Output File.
When I did the same thing with the actor cores looking like the did in my original post, then the correct overridden version got executed when I used the method with one Labview Object in private data (not any array or an array of Logger Output objects).
EDIT: I just tried to have the Logger private data be a single Logger Output object and writing the Logger Output File to that piece of private data in the Controller and the correct Write Output override method gets called now. So apparently I have done something stupid when it comes to creating the array of Logger Output objects and writing them in the controller? The private data is in the Logger actor so I have simply right clicked and chosen "New VI for Data Member Access" and chosen "Write" for "Element of Array of Logger Output Objects".
Attachments:
Controller Actor core updated.PNG ‏10 KB
Logger actor core updated.PNG ‏24 KB

IPhone 4 home button and calls

We have two iPhone...both 4. Both are running the latest software. We both have the same issue. One is that frequently when you press the home button to escape an app it doesn't work. If you press the on/off button and then go back to the home button it may work, but not always. It takes repeated tries to get a response.
The second, and perhaps related, issue is that calls frequently do not connect. I can select a contact from either my favorites or the contact list. When I select the name the phone appears to be dialing. You hear the ring once, but no more and the call doesn't connect. Then you can't end the call to start over you have to wait for it to decide to end.
I don't know whether to restore both phones or not. We are thinking of visiting the Genius bar, but we're sure they will work perfectly there.
Thanks,

To your first issue, is this happening across all applications or is it a specific app? I think the main problem is inefficient management, try holding down home + power until the device reboots. You may want to restore from a backup as well.
Same goes for issue #2.

My iPod doesn't show up on "My Computer" or iTunes and it doesn't sync or charge. Help please?

I have an iPod Classic, the 2nd most recent version. I havn't had problems with it until a week ago. Before I had the new iTunes update, a week ago, it wouldn't show up in my Device's or "My Computer" , wont sync and It wouldn't charge either. I thought to myself "Maybe I should update my iTunes, maybe thats why it's not working". I updated my iTunes library to the most recent software last night thinking it would help but... It didn't help at all and made things much more complicated. I don't like how the new iTunes navigates and the iTunes Helper isn't there now. I'm still facing the problem where it doesn't show up in iTunes AND it doesn't show up on "My Computer" AND still doesn'tt sync but the thing thats different is that it'll charge a quarter bit and say it's done, or it wont charge at all and stay on my home screen. I need help here. Anyone have any suggestions?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
If it does not even turn on
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M.

Nokia5300 i hear myself and caller doesn't hear me

Similar Messages

Maybe you are looking for