Non Java/ABAP client to SLD

Hi,
I need to create a .NET client for SLD. The client has to read information regarding the various SAP systems installed in my landscape.
Is there any way of doing so? Is there documentation or samples for such applications?
Specifically, what should be the content of the HTTP post message that I need to send to SLD in order to get a list of all SAP systems (R/3) in the landscape?
By the way, I managed already to create .NET client for registerind 3rd party systems in SLD (using the instructions in the u201Cregistering 3rd party systems in SLDu201D documents, located System Landscape Directory (SLD)), but I couldnu2019t find a similar document on reading from SLD using a servlet.
Thanks,
Idan

Hi,
From PI7.0 onwards ECC client registered automatically in SLD.
Check more on PI installation guidelines.
Re: Installing PI 7.0
Thanks.
Boopathi
Edited by: Boopathi Thangavel on Jun 30, 2008 8:55 AM

Similar Messages

Non Java Webservice client Authentication

I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindley

Hi Craig,
An partial example using .NET is attached; in this environment you need
to use their NetworkCredential class.
Hope this helps,
Bruce
craig lindley wrote:
>
I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindleyusing System;
using System.Net;
namespace SecurityBasicClient
class AuthClient
[STAThread]
static void Main(string[] args)
SoapInteropBaseService ws = new SoapInteropBaseService();
ws.Url = "http://webservice.bea.com:7001/base/SoapInteropBaseService";
Console.Write("User:");
string strUser = Console.ReadLine();
Console.Write("Password:");
string strPassword = Console.ReadLine();
ICredentials credentials = new NetworkCredential(strUser,strPassword);
try
ws.Credentials = credentials;
Console.WriteLine(ws.echoString("Hello World"));
catch (Exception err)
Console.WriteLine(err.Message);
finally
Console.ReadLine();

Calling a webservice(JAX-RPC) from non java client ?

Hi,
I read JAX-RPC is used for accessing webservices by calling the webservice methods from a java-based client.
Is it possible to call the Webservice methods(writeen using jax-rpc) from a non-java client,who sends his request in the form of SOAP based calls?
If JAX-RPC is not the correct one to call a RPC from a non-java client,In what way i can do this?
Can anyone please clarify my doubt..,
Thanks in Advance
Rao.,

Hi Arun,
Can i write a my client program using cgi scripts?
In the JAX-RPC docs it was said that i can invoke my Webservices through my Service endpoints or using WSDL location?
If iam using a Non-java Client,it will be easier(I think) to use the WSDL file to call the Web-Service(deployed using JAX-RPC).But,the Client should be aware of that WSDL file.
I have to develop a small Application using webServices(must use XML,SOAP technologies).The user will pass some Parameters as request and the Response should be an XML(SOAP message) message.User should be able to request via browser.(http://localhost:8080/)
Can you please suggest me which technology is correct to use,so that i can use the XML,SOAP in it.
Please let me know...,
thank you once again..,
Regards
Rao.,

JAXM and a non Java Web Service Client

How can I acces a web service buit using JAXM with a client written using other technology?
Where do I have to send the SOAP message from the client?
I saw that JAXM optains the messeage from the HttpRequest! How do I put the SOAP message there?
Thanks

if you are not taking advantage of asynchronous messaging via a messaging provider, but want a standard web service that speaks to non java clients then JAX-RPC should be the API of your choice. It is simpler then JAXM and more standard compliant.
If you want to do asynchronous messaging your client has to have some kind of messaging provider, too, to be able to continously listen to messages. Then the SOAP messages are then exchanged between the two message providers who both in turn notify onMessage the relevant application (message consumer).
I hope this helps you solve your problem ;-)

Java Web dynpro with ABAP Clients?

Morning,
We have a situation where we would like to use a Java Web dynpro with multiple ABAP backend data sources. This is for autorization as well as data. We are not using Enterprise Portal.
We've created a pair of system Jcos and mapped them to the Web dynpro via the URL. This works and the correct data from the correct Client is retrieved depending on which pair of Jcos we define in the URL.
The problem we are having is that we are only able to logon using the ABAP Client defined in the ume....master.client parameter.
Is there a way to achieve this (again without EP) either in the system configuration or programatically in the web dynpro?
tia
Cheers,
Mitch

Hello,
Thanks for the updates. Actually my query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
Madhu

WAS 6.40 SR1 - abap client copy after java addon install

After installing the WAS 6.40 SR1 abap+java central instance and database instance... we inadvertently proceeded to install the java add-on (j2ee). We realized we needed to do an abap client copy of "000" to a new client.
Is there a way to do the client copy, then point the java engine at the new client?
If not... what are our options. Is there a way to just uninstall the existing java-addon, do the client copy, then re-install the java-addon? We're hoping that this is correctable and we don't need to do a full re-install.
Thanks in Advance for any assistance.

Hello,
can anybody help me?
Regards,
Ralf

WLS JMS supports the clients developed by using non-java program languages,such as,c++,VB...

          WLS JMS supports the clients developed by using non-java program languages,such
          as,c++,VB?


The short answer is yes. This is a frequently asked question. I
          suggest searching this newsgroup in google using terms like "C++",
          "IIOP", ".NET", "JCOM".
          Note also that WL 8.1 (now out in beta) contains a thin java client
          (something like 0 or 300K without JMS, 700k with. The 0K client comes
          from leveraging WL's IIOP support.)
          Tom, BEA
          jerry8006 wrote:
          > WLS JMS supports the clients developed by using non-java program languages,such
          > as,c++,VB?

To invoke a java Program from non-java Clients

I need to develop a program in java which will be invoked using some non java client. For example: for the time being my java application will be invoked by tandem. Also, a huge volume of transactions can be expected to come in and these need to be processed at high speed(response time of 5 seconds or so). Any suggestions ?

By Tandem..I mean a non-java client...
We need to look at possible architectures for implementing the payment module of the an application. We can think of the payment module as a Java process that does the following � 1. validate the card and some other stuff....
The payment module should be able to support non java clients...
Take the case when a customer swipes a card at a store.... Another process (call it the router) determines if the transaction info needs to be sent to my java program... If yes , the router invokes my payment module. The router can vary from store to store ... So my Payment module will be invoked by non java clients... As part of deciding on the architecture we need to decide on the protocol used for communication � http/tcp/iiop etc.
Also, we need to decide on the various options for implementing the payment module.... It can be webservices, EJB Session Beans etc... But the key point is ,.....performance.... A huge volume of transactions can be expected to come in and these need to be processed at high speed(response time of 5 seconds or so).

ABAP Client and J2EE client mismatch

Hello,
we detected mismatch between default ABAP login client and J2EE client.
Now we need to change J2EE client to default ABAP client.
Its ABAP + JAVA installation and diff. occured after client copy.
Can you please let us know where we need to change all setting for j2ee engine like default client for UME, sld etc.
Best Regards,
Tushar

Hello. By default JAVA used the 001 client in ABAP+JAVA installation, be cautious with change it.
you can chage it through Config tool :
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/50ad3e1d1edc61e10000000a114084/frameset.htm
or from UME --> configuration --> ABAP system. You need to read about change datasources :
http://help.sap.com/saphelp_nw70/helpdata/EN/7e/a2d475e5384335a2b1b2d80e1a3a20/frameset.htm
and about SAPJSF user.
http://help.sap.com/saphelp_nw70/helpdata/EN/db/8b9b801df84aaaa76bdbcbc0b9725f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03e11edc6a6e99e10000000a11466f/content.htm
Regards.

Proxy Scenario (abap client)- XI, ICM_CONNECTION_FAILED

Hi Forum,
I have a problem with a Proxy Scenario (ABAP client proxy),
My scenario is R/3 (abap client proxy)--->XI ,
the client proxy while sending message to XI throws an error, which is seen in SXMB_MONI as:
404 Resource not found
Partner not reached
Error: -20
Version: 6040
Component: ICM
Date/Time: Fri Jan 25 09:20:54 2008
Module: icxxconn_mt.c
Line: 2124
Server: xxxap5_RP1_05
Detail: Connection request from (143/22024/0) to host: xxXP1.xxx.com, service: 8000 failed (NIEHOST_UNKNOWN) AP-T143, U22024, 500 xxUSER, , 09:20:54, M0, W0, , 1/0
I can see a stuck entry (LUW), for this in SMQ2, even on several re-execution of that LUW in SMQ2, it gives an error:
SYSFAIL
XI Error Client_Receive_Filaed

Hi
404 Resource not found
There might be the problem with the server having not to find anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
*Possible Tips:- *
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Refer below link
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Thanks
Swarup

Error With ABAP Client proxy

Hi All,
   I am trying to use ABAP Client Proxy(Sync). I am getting the error.
1. Message from SXMB_ADMIN on Business system.
<b> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="400" p2="ICM_HTTP_CONNECTION_FAILED" p3="" p4="">HTTP.HTTP_CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:Text language="EN">Error during http receive: Error code: 400 Error text: ICM_HTTP_CONNECTION_FAILED</SAP:Text>
</SAP:ErrorHeader></b>
2. No message On XI server.
3.Went through the Ravikumar Allampallam's blog
on ABAP ClientProxy .
4. Went through the vijaya kumari's " How do you activate ABAP Proxies?"
5. created connections (sld)and one http connections in SM59. Tested the connections.
6. Went throught the Forms.
Any help would be appriaciated.
Thank you
Ganges Leaves.

Vijaya Kumari,
   1. I have checked it. For XI server these are the values.
    Business System Role : Integration Server.
    Pipe Line url : http://server:8000/sap/xi/engine?type=entry.
8000 is the http port which i see in the SMICM+shift F1.
Thank you
Ganges Leaves

How does ABAP client proxy determine the sender business system

When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

Hi Annie,
Execute the following function module in your business system and see what name it returns..
LCR_GET_OWN_BUSINESS_SYSTEM.
You can always debug the code inside the above FM to find out how it gets the business system name...
I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
Regards,
Sumit
Message was edited by:
Sumit Khetawat

CTI integration with Non-Java based Webclient

Can anybody help?
I need any documentation concerning the implementation/ configuration of the ICI/BCB with the IC Webclinet installed on a ABAP Stack (non-java version). All info seems to be based on Java based Webclient.
Any help greatly received
Rob

I had a OSS ticket created and from that, what i could understand was that the ICI/BCB version is linked to the version of the CRM software and the associated ABAP Stack. For example CRM 2007 has the ICI version 3.05 but what you get when you put http://javahost:javaport/bcb is the Java stacks ICI system information. WHich will be like 3.00. And I was asked to ignore that java info.
What I heard is that the abap stack is the one implements the ICI/BCB Version and from CRM's version you know the ici version behind. But I did not get any mapping of "CRM version to ICI"from the OSS though.
Hope it provides little more information to your question.
Regards,
Elaya

ABAP client proxy 401 error

Hi i have generated a ABAP client proxy in my ECC system and sending an outbound message to XI. i get the following error.
HTTP response contains status code 401 with the description Unauthorized Error while sending by HTTP (error code: 401, error text: Unauthorized)
I have tested the following.
1) My sld and ECC system have the integration engine and pipeline settings for the XI Server: http://server:8000/sap/xi/engine?type=entry
2) logon to the URL http://server:8000/sap/xi/engine with user XIAPPLUSER and pwd in the browser because of the error 'Der Aufruf der URL http://server:8000/sap/xi/engine wurde aufgrund fehlerhafter Anmeldedaten abgebrochen'
any sugestions ? using a proxy as target works fine

Hi ,
You seem to have a problem with the XIAPPLUSER logon. Can you check that the user has the appropriate authorizations? Maybe the user is locked? Maybe the password has been incorrectly entered?
XIAPPLUSER should have the role SAP_XI_APPL_SERV_USER.
Also, check that the XI engine service has been activated.
Transaction SICF. Default_host->sap->xi Activate the entire node with all subtrees.
Cheers
Manish

ABAP client proxy wildcard/unicode problem

Hello,
i have an abap client proxy. The target system is a non sap system. For one input field of the request, a wildcard search is possible (with sign %, field type = string).
If i exceute the proxywith the wildcard sign '%' i get following error message:
SOAP:1.001 CX_SXML_PARSE_ERROR...Error in conversion from UTF-8 to type C or
type CSTRING: 48696C6673736368FC747A65 is not a
valid UTF-8
If i call the target system directly (for examle with jmeter), i get a response even with wildcard sign '%'.
It seems that there is a generell conversion problem at the sap client proxy. Do you have any ideas?
Is the problem maybe the transformation of the request, or the calling of the target system?
Thanks a lot!

any idea?

Non Java/ABAP client to SLD

Similar Messages

Maybe you are looking for