Non-java midi conversion

I have a bunch of MIDI files that I want to be able to play in my java program. The problem is, I composed them using a program called Midisoft Recording Session, which plays them back with the sound bank provided by my hardware. When I play them in a java program they sound completely different (sometimes just plain awful). I know that I could just have my program play them back with my hardware's sound bank, but then I would lose some cross-platform functionality. Is there a place where I could find a java sound bank that sounds like a typical sound card's bank? Or is there a better solution, like converting to RMF first?? My current solution is to record my MIDIs to WAV format and compress them into u-law or A-law WAV files, but this results in some quality reduction. (CD-quality WAV files are just too big.)

I've tried the shadow option as some suggest but this trick doesn't seem to work on *captions in Photo Gallery pages*.
You can not change photos page caption's font style or force text-2-graphic conversion because caption (and most everything else in photos page, albums, blog and podcast page) is rendered by javascript widget.
I also tried the font mapping option with the plist but my non-standard "fancy" font doesn't show in the list. I tried adding it manually be hand but it still didn't work, perhaps because I'm not referencing the font name correctly. Do I need to add the .ttf or .dfont extension? Does it matter that my fancy font in my home directory font library folder rather than my System font library folder?
You need to use font name that shows in 'Font Book' for FontMapping.plist to work.
Font mapping won't work for photos page caption as mention above, but you maybe able to substitute to another font.

Similar Messages

Mp3 wav midi conversion

Hi,
I am trying to write a program that will convert mp3 or wav file to midi. I know that the result will be approximate but I think it will be a good experience since i am quite new in java.From the information I have gathered so far I know that I need to perform a fft algorithm on the mp3/wav file in order to get the midi one. Can anyone give me a helping hand on how can i do that? or give me like a rough idea of the steps have I have to follow in order to achieve that.
Thanks

softwares like intelliscore does the conversion from
wav to midi. Does anyone know the procedure it uses?
ThanksFrom intelliscore website:
If you wanted polyphonic WAVE, MP3, or CD files to be converted to MIDI, you simply had no alternative but to succumb to the often tedious and time-consuming task of picking out the notes yourself, time that could be better spent on more creative endeavors.
Finally, the result of a spark of a dream and six years of research, Innovative Music Systems, Inc. is offering its patented technology for polyphonic WAVE to MIDI and MP3 to MIDI conversion to musicians like you.
They've had some time to develop it. And I don't think they did it in Java.
There is no specific magic thing, or set of rules to perform, to make such a conversion.
But good luck anyway.

I want to upgrade my hard drive from Standard 500 HHD to a SSD on my macbook pro non-retina mid 2012

I have two choices I'm going to install the hard drive internally and I want someone who has an idea about this now money isn't a problem and they are both close to each other. I want to buy one of these two can someone please tell me which is best.
1- http://eshop.macsales.com/item/Micron/C400512G25/
2- http://www.crucial.com/store/partspecs.aspx?IMODULE=CT480M500SSD1 and http://eshop.macsales.com/item/Crucial/CT480M500SSD/
By the time I do this of me I am also going to have a 16 GB RAM instead of the 4 Gb
Now remember my MacBook Pro 15" non-retina mid 2012 i7 2.3 Hz

First, see my one and only user tip -> Upgrading your MacBook Pro with a Solid State Drive. It has some tips that may be of help.
Secondly, either of the drives that you've chosen should work well in your MacBook Pro. "Micron" is also the manufacturer of the Crucial SSD. I'm just a bit skeptical about the first because of the unknown nature of the beast... and I doubt that it has the most recent technology built into the Crucial M500 480GB.
You can buy from Crucial or through OWC - I would just pick the one with the cheaper price but I would definitely get the M500 series over the somewhat 'older' (based upon m4 technology, I'm betting) Micron drive.
Good luck... call back should you have any questions.
Clinton

Non English characters conversion issue in LSMW BAPI Inbound IDOCs

Hi Experts,
We have some fields in customer master LSMW data load program which can
contain non-English characters. We are facing issues in LSMW BAPI
method with non-English characters Conversion. LMSW steps read and
conversion are showing the non-English characters properly with out any
issue. While creating inbound IDOCs most of the non-English characters
replaced with '#' and its causing issues in creating customer master data in
system. In our scenario customer data with non-English characters in
the first name, last name and address details. Any specific setting
needs to be done from our side? Please suggest me to resolve this issue.
Thanks
Rajesh Yadla

If your language is a unicode tehn you need to change the options like IN SAP you need to change it to unicode in the initial screen Customize local layout(ALT F12) options 118 --> Encoding ....

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

CTI integration with Non-Java based Webclient

Can anybody help?
I need any documentation concerning the implementation/ configuration of the ICI/BCB with the IC Webclinet installed on a ABAP Stack (non-java version). All info seems to be based on Java based Webclient.
Any help greatly received
Rob

I had a OSS ticket created and from that, what i could understand was that the ICI/BCB version is linked to the version of the CRM software and the associated ABAP Stack. For example CRM 2007 has the ICI version 3.05 but what you get when you put http://javahost:javaport/bcb is the Java stacks ICI system information. WHich will be like 3.00. And I was asked to ignore that java info.
What I heard is that the abap stack is the one implements the ICI/BCB Version and from CRM's version you know the ici version behind. But I did not get any mapping of "CRM version to ICI"from the OSS though.
Hope it provides little more information to your question.
Regards,
Elaya

How to send a http request to a non java appln

I have one legacy web application running which can handle only http request . So I need to connect (using http request) and send my request and get the response, without opening that application in browser.
Any idea
1) How to connect to non - java appln from a java appln ?
2) How to use the Httprequest without displaying the page using browser?

You can try one of three routes:
Open a socket and write the HTTP request and parse the HTTP response yourself
Use java.net.URLConnection
Use Jakarta Common's HttpClient at jakarta.apache.org- Saish

Using java object in a non java application

Can you tell me how will i be able to use a java object(how can i instantiate a java class) in a non java application.I have read about COM,DCOM but these are fine only with micrososft platforms .Can anyone offer me alternative solutions...i also have read about CORBA ...kindly pour in your advice

i have read about it thats true but had i understood it from the material i wouldnt have asked for help ..instead i would i have been working on my project..

Avaya(Non-java app) integration with ADF

Hi,
We have a desktop application Avaya (non-Java) & want to integrate it with ADF. Currently we do it by passing parameters in HTTP URL. If the user clicks on a button in non-java app, it should:
(1) open search page of an ADF application and execute search.
(2) if the ADF application is already open, the button on Avaya app should execute search with partial page refresh. However, the whole page is being refreshed.
Can you please guide, how to do this with partial page refresh? , as the No 1 is almost achieved.
Thanks,
NC

Hi Shay,
Below Options were tried for integration. Please have a look at them and suggest if there is any other possible way to Integrate Avaya with ADF.
1) Calling ADF application with URL parameters.
Reasons to drop:
Every time a URL is called the entire page will get rendered again taking some 2-3 seconds which is very critical to the application.
ADF is capable of handling URL parameters without re-loading the whole page(http://oracamp.com/passing-parameters-adf-application-through-url). But we can't use this inbuilt way as we have many customized developments implemented in the page. This way directly works at AMImpl (at Model level) level. We want the events to be fired at View level. That is backing bean level.
2) Avaya is capable of dealing with ActiveX (OCX). They sent me 2 DLLs which handles communication between web page and Avaya application. A simulator was also sent (bundle attached herewith). The steps to be carried out for testing are-
Installation procedures:
i. Register the DTLCRMINT.ocx file. Start->Run-> Type the command
ii. regsvr32 <ocx file location>
iii. Register the DTLINTCMP.ocx file. Start->Run-> Type the command
iv. regsvr32 <ocx file location>
v. Double click on the Clinet.exe it would open up a windows application with a Textbox and Command button. Put In the data which needs to be sent.
vi. Open the CRM Page.html. On opening the OCX would be loaded by default.
vii. Now clicking the Send Data button on the client application, whatever information is there in the Client Text Box would be sent to the web page.
viii. From CRM side, the application needs to use the OCX provided, and must wait for the event. On receiving the event the data that is retrieved as a part of the event can be parsed to update the text box and click on the search button.
Reasons to drop:
It works fine with basic HTML page. But once integrated with ADF page as an inline frame it doesn't work. We tried to embed the OCX object inside <verbatim> tags, but was not successful. The event fired by ActiveX object is triggered at client side by VBScript function. Avaya's ActiveXs seem to be only working with VBScript according to my understanding. So there was no way for ADF to capture VBScript events.
ADF is capable of javascript up to some extent. To do a critical application like this, my feeling is javascript is never a good option.
3) To use a text file. Avaya writes, ADF application reads.
Reasons to drop:
ADF can read the text files with normal java IO methods. But only the server directories are visible. So, Avaya has to write the information in the server file. With using a parameter like user name, ADF application can read the file in regular time intervals (with using poll feature) and get relevant information and automatically run the search.
Initially the idea was to do this at client side. But since this is a web application, file reading at client side is next to impossible. Again when one side is reading and the other side is writing, file access violations may occur.
4) Another option is if Avaya can offer the value in a web service, the ADF application can get it.
Reasons to drop:
There may occur a latency as well as Avaya says they can't offer web services.
5) The ideal solution is, the ADF application's front end control's IDs can be provided. If the Avaya system is capable of accessing or getting hold of DOM and pushing the value to the controls and clicking the button; things would become pretty straight forward. JMeter works like this in testing J2EE applications.
Any Recommendations how can it be done .
Thanks.

Calling a webservice(JAX-RPC) from non java client ?

Hi,
I read JAX-RPC is used for accessing webservices by calling the webservice methods from a java-based client.
Is it possible to call the Webservice methods(writeen using jax-rpc) from a non-java client,who sends his request in the form of SOAP based calls?
If JAX-RPC is not the correct one to call a RPC from a non-java client,In what way i can do this?
Can anyone please clarify my doubt..,
Thanks in Advance
Rao.,

Hi Arun,
Can i write a my client program using cgi scripts?
In the JAX-RPC docs it was said that i can invoke my Webservices through my Service endpoints or using WSDL location?
If iam using a Non-java Client,it will be easier(I think) to use the WSDL file to call the Web-Service(deployed using JAX-RPC).But,the Client should be aware of that WSDL file.
I have to develop a small Application using webServices(must use XML,SOAP technologies).The user will pass some Parameters as request and the Response should be an XML(SOAP message) message.User should be able to request via browser.(http://localhost:8080/)
Can you please suggest me which technology is correct to use,so that i can use the XML,SOAP in it.
Please let me know...,
thank you once again..,
Regards
Rao.,

JAXM and a non Java Web Service Client

How can I acces a web service buit using JAXM with a client written using other technology?
Where do I have to send the SOAP message from the client?
I saw that JAXM optains the messeage from the HttpRequest! How do I put the SOAP message there?
Thanks

if you are not taking advantage of asynchronous messaging via a messaging provider, but want a standard web service that speaks to non java clients then JAX-RPC should be the API of your choice. It is simpler then JAXM and more standard compliant.
If you want to do asynchronous messaging your client has to have some kind of messaging provider, too, to be able to continously listen to messages. Then the SOAP messages are then exchanged between the two message providers who both in turn notify onMessage the relevant application (message consumer).
I hope this helps you solve your problem ;-)

Checking running non java process

Hey,
i need to write a program that checks if a non-java process is still running (under windows) and to run a system command if it is not. Is there a way to check what process are still running?
Thanks

You will have to make use of native methods for that. Or use something with Runtime.exec();

Is it possible to deploy Oracle forms in a different non Oracle Mid Tier

Hi guys,
This is just a learning question, and for better understanding purposes.
Is it possible for us to deploy Oracle fmb's into non-Oracle Middle tiers and make them running. I am aware that forms are Oracle developed products and are product dependent and runs when deployed on Oracle Application Servers or Weblogic Servers but still has any one managed or is aware to make them run on Non-Oracle Mid Tiers . Please clarify is it possible in any means to transfer these fmb files to non-Oracle product and make them run.
In addition to that, please share your knowledge is it the same to .rdf as well.
Your contribution is appreciated in advance. Please provide supporting links or any if you have.
Thanks,

It is not possible. The Forms runtime is a C Process; that runtime, that interprets FMX files, only exists in Oracle Application Server, so you need to have OAS or Weblogic to run Forms.

Running non-java programs

Is it possible to run a non-java program(i.e program off desktop ) into a JFrame. Meaning that this program will only run in the specified JFrame.

aggie09 wrote:
Is it possible to run a non-java program(i.e program off desktop ) into a JFrame. Meaning that this program will only run in the specified JFrame.Don't create more than one thread for the same problem/question please. Since your previous post holds a bit more information about it, please continue there:
[http://forums.sun.com/thread.jspa?threadID=5378613]

Non Java Webservice client Authentication

I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindley

Hi Craig,
An partial example using .NET is attached; in this environment you need
to use their NetworkCredential class.
Hope this helps,
Bruce
craig lindley wrote:
>
I see in the Weblogic docs many examples of Java webservice clients. Including
one that passes a user id and password through the getXXXPort(userid, password)
call for authenticating the user at runtime. My question is, can a non Java webservice
client authenticate itself in somewhat the same manor? A non Java client wouldn't
have the client jar file available containing the stubs and all.
If someone has a code snippet they could send me it would be most appreciated.
Thanks,
Craig Lindleyusing System;
using System.Net;
namespace SecurityBasicClient
class AuthClient
[STAThread]
static void Main(string[] args)
SoapInteropBaseService ws = new SoapInteropBaseService();
ws.Url = "http://webservice.bea.com:7001/base/SoapInteropBaseService";
Console.Write("User:");
string strUser = Console.ReadLine();
Console.Write("Password:");
string strPassword = Console.ReadLine();
ICredentials credentials = new NetworkCredential(strUser,strPassword);
try
ws.Credentials = credentials;
Console.WriteLine(ws.echoString("Hello World"));
catch (Exception err)
Console.WriteLine(err.Message);
finally
Console.ReadLine();

Non-java midi conversion

Similar Messages

Maybe you are looking for