Non Leopard client accessing the server

I have one machine in our office, a G5, that is not running snow leopard since it is not an intel machine. How do I configure that machine to join the server? All the other machines were done with login items in the account section, but that isn't available.

You should be able to use the Directory Utility, located in the /Applications/Utilities folder to manually bind to the Snow Leopard server.

Similar Messages

How do I configure snow leopard server to allow local client to access the server using its public domain name

I have SLS 10.6 running on my local network with DNS configured.
I can access the server from a client on the lan using server.local or server.domain where domain name is my publically registered domain,
From the internet I can access my server using the registered domain name i.e. www.domain.com.
Is it possible to set my server up so that www.domain.com also reaches the server when used by a client locally? At present I get a page not found error.

The configuration you're aiming for is called split-horizon or split-brain DNS, and it's quite possible. It can get slightly hairy when you have different stuff using the same host name for different purposes, for instance, and you'll need to track all external DNS entries in your internal DNS server when you're running "split".
Here is how to set up DNS services. Split-horizon is one of the options listed there.
My preference is to use a different domain or subdomain within the network, and to avoid using split-horizon where I can reasonably manage it. One domain name is configured for and reachable outside and is effectively public, and the other domain (or a subdomain) is inside and private and only reachable directly or via VPN, for instance.

Client with IP address is not allowed to access the server

While trying to connect to the SQL Database on Windows Azure via SQL Server Data Tools 2012 (from local), it gives me a message "Client with IP address 'X.X.X.X' is not allowed to access the server". And in the message it also gives you the direction
on how to fix this.
So, going back to the Windows Azure Management Portal, I have included the current IP address in to the existing firewall rule. I tried to connect to the sql database on azure via SSDT it worked properly.
Next day.. when I open the tool and trying to connect, it gave the same error, so I checked in the portal and this time it was showing different IP, then I added this IP to the firewall list, and I was able to connect.
Question: Is this a normal behaviour for adding IP each day to the firewall rule? (OR, I am using the "Free Trial" subscription, is this the issue?), or is there anything more I need to do to avoid adding the IP each day?
Please let me know.
Thank you.

Hello,
To workaround your requirement, you can try to use the New- SqlAzureFirewallRule command line in PowerShell to configure the firewall rule allow your current IP automatically.
Reference:
Update Azure DB Firewall Rules with PowerShell
http://social.msdn.microsoft.com/Forums/windowsazure/en-us/67540278-1f54-491b-9dd2-73587cf51cef/configure-allowed-ip-addresses?forum=ssdsgetstarted
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Accessing the server on my own machine when off the network

I want to access the server on my own computer from my own computer, but I can't seem to do this unless I'm connected to a network. In order to access localhost, I have to contact my own computer through my router, which seems unnecessary (especially since I am frequently away from a router). Is there any way for me to access my server and still run my PHP code without having to go through a network?

Port 25 is blocked by a lot of ISPs and a lot of local network admins even on corporate networks in order to curb SPAM infected systems from causing Blacklisting issues with the main public IP gateway address used on these networks.
You had indicated in the OP that you were using an SSL port (i.e. 465) to send out, so the question never came up as to what if you were using port 25 for some reason. We all thought you had already covered that, which apparently you didn't. 995 is the SSL port for POP (receving end) and 465 is the SSL port for SMTP (the sending end). You need to make it a habit to use these ports anyway if supported by your email host as it'll keep these issues from happening and it'll also secure that email connection as well.
In terms of why it wasn't erroring out on you with port 25 quickly enough, when ports are blocked, the traffic just gets dumped, so perhaps your email client was looking for a port closed response from the email server in question... something that won't happen when the traffic is simply being blocked/dropped at the network level.
Anyway, you solved your issue via what we all thought you had in place anyway based on your OP info.

How to get AppleTalk on OS X Lion. I need it to access the server.

I was using G5 and had Leaord on it. I was not able to update any new softwares on it as it was not intel based. I bought a new machine Mac Pro and now there is no appletalk on it.
Does anyone know how I can access appletalk from lion or is there any other alternative i can access the server.
Please let me know. I have been looking about but i am not able to find any solution.
Thanks.

Alikazani,
AppleTalk is gone since Snow Leopard. There's no way to use it on Lion. But isn't clear what you need. Do you still want to use your G5? Or you need only to transfer files onto your new Mac Pro?

How do a client access the WAR file at loading a URL?

I would like to apprehend that how do a client access the WAR file at loading a URL?
Actually a web containter,for example,servlet container can have the software tool such as iPlanet[tm] Application server to deploying the servlet classes and JSP files by containing the WEB-INF directory.
how could the process of request and reponse be done by employing the WAR file..plz steer me....

clients don't access a war file. that's just a package for the container to deal with.
when the WAR is deployed, the container unpackages the contents and deploys the app. From that point forward clients use the deployed stuff. the unpackaged servlets handle requests from then on.
your question makes little sense to me.
%

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

An error occurred while trying to access the server

an error occurred while trying to access the server, I keep getting this message when trying to convert, what is the problem, windows 7 user

Hi williaml,
It sounds like you may be trying to access one of the Adobe Document Cloud services from within Adobe Reader. If so, please log out and then log back in.
If you're still having trouble, please try logging in via the web interface at https://cloud.acrobat.com.
Let us know how it goes!
Best,
Sara

Unable to access the server with its domain name.

Hi ,
I have configured the site VPN between to cisco ASA and everything is working fine,but if i access the server in url with ip address http://10.XX.XX.XX:123 i am able to connect the server but if i m trying with server name i.e DNS name it doesnt work for eg : http://abcdef:123 .
what could be the issue kindly let me know

The issue is likely dns. Check the dns settings on the device you're trying to access the server's url with. Can you succerssfully do an nslookup on the server's domain name? You'll need the machine to have at least one dns server defined in its dns settings that can resolve the web server's domain name to an ip address. Hope that points you in the right direction.

403 Error when accessing the server

Hi,
I have successfully installed the ABAP WebAS Preview. All the processes start but when I try to access the server on port 8000 or 8100, I got this error message :
Service cannot be reached
What has happened?
URL http://192.168.0.2:8000/ call was terminated because the corresponding service is not available.
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:blackbox_NSP_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
I'm connected to a modem-router at home which behaves as a DHCP server.
I thought it was due to the fact I didn't have a full domain name in my computer name. I have tried to enter LOCALHOST and port 8000 in SE80>Utilities>Settings>Business Server Pages. No way ! Same error.
Thanks in advance for your help.
BTW I'd like to play with BSPs, where should I go to find some code examples ?

this is probably because ICM may not be running. check it thru transaction SMICM and also check in transaction SICF whether the services are active.
try to ping the system using
http://server.xxx.om:port/sap/bc/ping
as far BSP samples and tutorial.
BSP weblogs here at SDN
http://scn.sap.com/community/abap/bsp/content?filterID=content~objecttype~objecttype[blogpost]
and tutorial at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
also check out
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
Regards
Raja

Get the current count of the client accessing the servlet

Any body can tell me how to know the information of every client that accessing my servlet after the client access the login interface.

Thanks.
But,
My mean is not know each client information. I want to know all the current client count is accessing my web application and the client do not include that
user has signed off the application nor the browser is closed by some reason. Sometime if you enter the forum, you maybe find how many people are in the forum current time? I just know all the users now accessing my web application

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that's not the case because my coworkers are connected. Can someone

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I'm signed in, I have my serial number, but the system won't allow me to access the server to download a replacement for my premiere eolements 10. What am I doing wrong?

I lost my hard drive and am replacing a lot orf software on the new one.software. Bah!
But Adobe premiere 10 won't allow me to access the server to download a replacemet.
What am I doing wrong?

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 10: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

Sending a certificate form the client to the server... how to ?

how can I send a certificate from the client to the server trough a Java code ??

Short answer: You specify a keyStore.
Either via command line using the -Djavax.net.ssl.keyStore=keystorefile property,
or in Java code:
char[] passphrase = "password".toCharArray();
SSLContext ctx = SSLContext.getInstance("TLS", "SunJSSE");
// KeyStore for the SSL client certificate
KeyStore keyStore = KeyStore.getInstance("PKCS12");
keyStore.load(new FileInputStream("client-cert.p12"), passphrase);
KeyManagerFactory keyManagerFactory = KeyManagerFactory.getInstance("SunX509", "SunJSSE");
keyManagerFactory.init(keyStore, passphrase);
// keyStore for trusted server certs or CAs
KeyStore trustedKeyStore = KeyStore.getInstance("JKS");
trustedKeyStore.load(new FileInputStream("verisign-test-cert"), passphrase);
TrustManagerFactory trustManagerFactory = TrustManagerFactory.getInstance("SunX509", "SunJSSE");
trustManagerFactory.init(trustedKeyStore);
ctx.init(keyManagerFactory.getKeyManagers(), trustManagerFactory.getTrustManagers(), null);
SSLSocketFactory sslSocketFactory = ctx.getSocketFactory();
HttpsURLConnection.setDefaultSSLSocketFactory(sslSocketFactory);
// open the http connection to the party
myConn = (HttpsURLConnection)myURL.openConnection();

I purchased an HD movie on Apple TV but it says that I cannot access the server at this time. I try daily but this problem doesn't seem to go away. Any suggestions?

I purchased a movie via Apple TV/iTunes but it says that I cannot access the server at this time. In summary, I can't download the movie. This problem has persisted for 4-5 days now. Any suggestions? BTW, I upgraded to Yosemite on my iMac last weekend. Thanks!

You need more RAM.
http://www.thexlab.com/faqs/lackofram.html
Mostly iTunes, mail, finder, google chrome, and one or two other programs.
What are the "two other programs?" The ones you named shouldn't be consuming all your RAM, even if open concurrently. But I've heard (I don't use it) 10.7 is a memory hog.
Closing open apps may not solve the problem, since that memory is still being held in reserve for them.
This problem is usually caused by a combination of low RAM and low disk space.I am very puzzled when you say you have 895GB left on the drive. That should be an enormous amount of room for the memory to page out (write) to.
Message was edited by: WZZZ

Non Leopard client accessing the server

Similar Messages

Maybe you are looking for