Non-Script Way of Setting Visible Property

Why hello there!
I am looking to set the "visible" property of a movie clip in
the Flash CS3 designer, as opposed to using AS3.
In my movie, I set a movieclip to invisible in code
immediately. However, I sometimes see the artefact of the image for
a split-second on running the swf in my browser. I would therefore
like to set the property in the designer.
I am guessing that there is not a way of doing it. Are there
any suggestions?
I'm now considering setting the alpha value to 0 in designer,
and then setting the alpha value to 1 in code when I need to be
able to see the mc.
Raffi.

Hey kglad,
I appreciate the prompt response. Sorry I wasn't clear enough
in my initial message.
I am simply looking to be able to set, say, a rectangle
primitive to invisible without having to set in the code. At the
moment, I am setting the visible property to false in the first
frame in the code. However, as a result, I sometimes (not
frequently) see artefacting when I run my movie. The rectangle very
momentarily appears before disappearing.
Raffi.

Similar Messages

Is their a way to set system property in weblogic console

Hi WL USERS
Is their a way to set system property in weblogic console ie (http://localhost:8080/console) ? if yes, can we access that property in code using System.getProperty()?
Regards
vishy

Yes, It is Possible.
Please check the Option-1). Mention in the Following Link: http://weblogic-wonders.com/weblogic/2010/03/26/nodemanager-based-managedservers-setting-mem_args/
Here i tried to set a Custom Property "*-Duser.dir=E:/MyDirectory*" through the Admin Console.
NOTE: Setting any Option like JAVA_OPTIONS/CLASSPATh etc through Admin Console will work only when you start your Servers using the NodeManager. It means when you start your ManagedServers through AdminConsole...or Using nodeManager based WLST scripts.
Thanks
Jay SenSharma
http://weblogic-wonders.com/weblogic/ (WebLogic Wonders Are Here)

How to set visible property to href link

Hi All,
I want to open the new jsp page in the new tab when will we click on the link in my ADF application.So i tried like this.
<af:column id="pt_c115" >
<a id="JspLink" href="AuditLogInfo.jspx" target="_blank">JspLink</a>
</af:column>
Im able to view my new jsp page when im click on JspLink link.But here my problem is i have nee to set the visible condition if the 'status' field of adf table is succes only i want to view the link other wise no need to visible my link.
visible="#{row.bindings.Status.inputValue=='SUCCESS'}" is working for commandbutton.But i'm not able to see any visible property in <a id="JspLink" href="AuditLogInfo.jspx" target="_blank">JspLink</a> .How can i set this condition?Please help me.I'm using JDeveloper 11.1.1.5 version.
Thanks in Advance!
Edited by: 851924 on Apr 5, 2012 11:22 PM
Edited by: 851924 on Apr 5, 2012 11:23 PM

Instead of using a jsplink you should use an af:goLink which is the adf equivalent and has all the needed properties.
Timo

Is there any way to set a property for all existing Form Fields of a particular type (Che

In versions of Acrobat prior to version 9, selecting a particular form tool (Textbox, Checkbox), etc. would only display Fields of that particular type in the Acrobat Designer (not LiveCycle).
If one wanted to change a particular property of all check boxes for example, one would select the Checkbox Tool, Click Edit>Select All>Right Click one of the Checkboxes and Set the Property for all of the Form's Checkboxes.
Selecting a particular form tool in the Acrobat (not Lifecycle) Designer in version 9 appears to no longer filter the display to that particular form field type. Is there any way to display only 1 particular form field type in or set a particular property for all existing Form Fields of a particular type (Check Box, Text Box, etc.) in Acrobat 9?

Thanks for the tip..Am aware of this option and have used JavaScript to batch change properties in the past...
Am looking for a way to replicate the interactive procedure available in previous versions. Also, want a way to only display certain Form Field types (use this when analyzing forms which I didn't create).

Set visibility property for items depending on other items

Hello,
I want to set the visibility setting for an item that I have, the steps should be as the following,
for example
if I have an item that asked,
do you have children ?
if the answer is Yes,
the next item should be visible which let's say, number of them
if no,
the next item should be not visible
I tried to set a trigger for the item I am controlling its visibility which is
pre-text-item and wrote
if 'CHEQUE_TABLE.CHEQUE_RECIEVED'='yes'
then
set_item_property(:SYSTEM.CURRENT_ITEM,visible,property_true) ;
else
set_item_property(:SYSTEM.CURRENT_ITEM,visible,property_false) ;
end if;
but it doesn't seem to be right, ,,,
thank you

I can see two potential problems. The first:
if 'CHEQUE_TABLE.CHEQUE_RECIEVED'='yes'
Does CHEQUE_TABLE.CHEQUE_RECEIVED refer to a Data Block and Item? If yes, then you are trying to tell Forms to look at the value of the string 'CHEQUE_TABLE.CHEQUE_RECEIVED' when you should be refering to the value of the Block.Item through direct reference, eg:
IF :CHEQUE_TABLE.CHEQUE_RECEIVED = 'yes'
How is the value of CHEQUE_RECIEVED set? Does the user select the YES value from a List of Value (LOV) or from a Poplist or do they enter the value by typing it in? If your code is looking at the string 'yes' and comparing it to the value of the Block Item which is in upper or mixed case, then 'yes' = 'Yes' or 'yes' = 'YES' will evaluate to FALSE instead of TRUE.
It is always a good idea to use a Poplist or a List of Values when you are expecting specific values to be entered by the user; this enables you to force the value to be entered the same by everyone. If the user CAN type the value in, then at least set the Case Restriction property to UPPER or LOWER so regardless of how the user enteres the value, it will be stored in the corrected case.
Craig...

What is the best way to set property to multiple fields?

Dear Experts
My requirement is, I want to allow user to fill only some specific fields in the form. When user A opens the form, he may be able to fill Field1~Field10. And when user B opens the form, he may be able to fill Field11~Field20.
I have implemented one solution as below to do this but the performance is poor.
- Recursively poppulate all fields into array
- Iterate all fields to make it read only (Field.access = 'readOnly')
- Iterate all fields and compare with enabled fields list, if any field matchs then enable it (Field.access = 'open')
(I have list of enabled fields for each user like this : form1[0].page1[0].ProjectNumber[0],form1[0].page1[0].CustomerName[0],form1[0].page1[0].Fi nishedGoodsNo[0],......)
Is there a better way to reference multiple fields to set their property?
I know, we can reference multiple fields using FormCal like Field[*] but is it possible to complete my case?
Any suggestion?
Thanks

We make web application which accept the form designed by end user. So we try to make them most comfortable to use LyfeCycle Form Designer by creating tds template for them and it contains the script which enable/disable fields. So the user don't have to set all fields to read only. Our script will do it.
Anyway I will adjust when enabling them.
One more doubt.
When I type in the script editor, it lists member :
- all, the hint says "Returns the collection of like-named, in-scope nodes. If the node has no name, a like-classnamed collection is returned."
- classAll, the hint says "Returns the collection of like-class, in-scope nodes."
Can I get all fields by these member? get fields from class?
It would be good if it can do.
I try to check XFA reference and use them but cannot get how it work.
Could you please suggest?
Thanks

Hi how to set the visible property in oracle adf?

Hi,
I am new to oracle adf in my application one of the field is id and it is sequence generated value Whenever I entered remaining values and click on save then only it has to display with sequence generated value before saving it has to be in hide mode. Can any one help me how the approach is.

As there are three ways through which you may pass a message to B2B, so there are three ways to set Action name property.
If you are using SCA/Fabric then set below properties -
b2b.fileName
b2b.contentType
If you are using JCA JMS adapter, then set below property -
jca.jms.JMSProperty.ACTION_NAME
If you are using JCA AQ adapter then set -
ACTION_NAME
Regards,
Anuj

I can't set the visible property of a CWAnnotation Object

I'm working in a W2000 with Visual Basic 6.0.
When I try to set this property (Visible in CWAnnotation), Visual Basic generates a run time error. Is there any kind of patch?

This is a known issue with Measurement Studio 6.0. There is not currently a patch for this problem. The workaround is to move the annotation outside the plot area when you do not want to display it.
David Rohacek
National Instruments

Setting the property "Cache Level" of the pcd object to "None".

Hi all
I have an EP 6.0 on NW04 SPS 17. I need to solve a problem and found note 960975. My question is, how could we change the setting the property "Cache Level" of the pcd object to "None"? Where should I go? Is it on the NWA, Visual Admin, Configtool or somewhere else?
Many thanks before.
Regards
Agoes
Message was edited by:
Agoes Boedi Poerwanto

Hi Agoes,
By using the tool Support Desk -> Portal Content Directory -> PCD Administration you can do this. Please note that this tool should only be used in debugging situations.
There is a new section "Release a Unit from the cache cluster wide" in this tool. With this new functionality, you can remove an object from the cache on all nodes in the cluster. If the object is still in use, it will be reread immediately from the database
Releasing the entire PCD cache can severely affect performance. Hence, if there are inconsistencies suspected with a single object, e.g. a role or an iview, the new section "Release a Unit from the cache cluster wide" can be used to evict the given object from the cache on all nodes in the cluster.
Cheers,
shyam

How to set the disable,visible property in declarative components.

We have used one declarative component. It consists of 5 buttons (add,delete,save,delete,print). In all of our pages, this declarative component is used. We could bind methods and was able to use each pages seperately (by linking the methods in the backing bean)
But for implementing the DISABLE,VISIBLE properties, we have added the attributes for this and refered this to the corresponding disable and visible property of the button. In the page all these properties where reflected. But at the runtime these buttons are not coming.
Can anyone advise how can we set the disable,visible property in declarative components.

Hi vikram ,
i hvnt initialized the properties ,
in my declarative component i have one button say Save button and i want to config 2 properties Disable and Visible
i added two attributes ( java.lang.Boolean ) say disablr_btn ,*visible_btn* and mapped wth the Save button Properties Disabled and Visible using expressions
Now the button is invisible while running the page.
if i remove the mapping from properties Disable and visible , the button is visible
should i init the properties in faces config , i dnt knw hw to init the properties
pls advice

Set ALV Cell visibility property

Hi,
I would have 2 tables for ALV. One table consists of the data to be bound to the ALV. The other table would have the read only property(boolean) filled for each of the ALV cells.
I would want to set the property of each ALV cell using the second table. How do i do that?
Currently i am just testing it for few attributes statically using the below code.
DATA lo_nd_date_table TYPE REF TO if_wd_context_node.
DATA lo_el_date_table TYPE REF TO if_wd_context_element.
DATA: lt_ele_set TYPE wdr_context_element_set.
navigate from <CONTEXT> to <DATE_TABLE> via lead selection
lo_nd_date_table = wd_context->get_child_node( name = wd_this->wdctx_date_table ).
lt_ele_set = lo_nd_date_table->get_elements( ).
LOOP AT lt_ele_set INTO lo_el_date_table.
      lo_el_date_table->set_attribute_property(
           attribute_name = 'WK02'                                 -
> Attribute Name (Column Name)
           property       = if_wd_context_element=>e_property-read_only
           value          = 'X' ).
<< Similarly for other attributes>>
ENDLOOP.
I have inserted this code at the end. Initially few other properties were set to the cells.
This seems to be not working.
Regards,
Rekha
Edited by: Rekha Gopinath on Sep 8, 2009 10:40 AM

Hi Lekha,
In my case, the columns represents dates. The rows represent projects. So, only those row cells are editable where the project is valid.
1. I have created READ_ONLY attribute for the date node (table).
2. I am filling the READ_ONLY to abap_true or abap_false based on the following condition.
   Even if one of the projects is not valid for a date, then READ_ONLY = ABAP_TRUE. This means, even if one cell is set to abap_true, then READ_ONLY is set to abap_true.
3. I modify the date node and bind it with the READ_ONLY set row wise.
Loop at the data and set read only
navigate from <CONTEXT> to <DATE_TABLE> via lead selection
lo_nd_date_table = wd_context->get_child_node( name = wd_this->wdctx_date_table ).
CALL METHOD lo_nd_date_table->get_static_attributes_table
    IMPORTING
      table = lt_date_table    .
LOOP AT lt_date_table INTO ls_date_table.
    lv_tabix = sy-tabix.
      READ TABLE wd_this->gt_prop INTO ls_prop INDEX lv_tabix.
      IF sy-subrc EQ 0.
        IF ls_prop-wk01 = abap_true OR
          ls_prop-wk02 = abap_true OR
          ls_prop-wk03 = abap_true OR
          ls_prop-wk04 = abap_true OR
          ls_prop-wk05 = abap_true OR
          ls_prop-wk06 = abap_true OR
          ls_prop-wk07 = abap_true OR
          ls_prop-wk08 = abap_true OR
          ls_prop-wk09 = abap_true OR
          ls_prop-wk10 = abap_true OR
          ls_prop-wk11 = abap_true OR
          ls_prop-wk12 = abap_true OR
          ls_prop-wk13 = abap_true OR
          ls_prop-wk14 = abap_true OR
          ls_prop-wk15 = abap_true.
          ls_date_table-read_only = abap_true.
        ELSE.
          ls_date_table-read_only = abap_false.
        ENDIF.
      ENDIF.
    MODIFY lt_date_table FROM ls_date_table INDEX lv_tabix TRANSPORTING read_only.
ENDLOOP.
CALL METHOD lo_nd_date_table->bind_table
    EXPORTING
      new_items            = lt_date_table
      set_initial_elements = abap_true.
4. I loop through the column reference and use the code mentioned earlier.
          CREATE OBJECT lr_input
            EXPORTING
              value_fieldname = lv_id.
          lo_column->set_cell_editor( value = lr_input ).
          lr_input->set_read_only_fieldname( value = 'READ_ONLY' ).
The expected output is different from the input i had mentioned earlier for Row 1, row 2, Row 3 and row 4. Here, i would get all the rows as non editable except for Row 3.
I would want to set all columns based on condition.
Regards,
Rekha

Is there a way to set up iCloud with a non .me email account?

Hi, hoping someone can help?
Next week I will be working 3 days in the office and 2 from my home in Leeds.
I have 2 iMacs - one for each location.
I was wondering whether there's a way of setting up iCloud with my work email address in order to sync my emails on both machines? I have to refer to my emails quite a lot in my job and it will be rather frustrating to have some one one machine and the rest on the other.
Oue email server is POP only. I use Apple Mail on both machines.
Any advice would be greatly appreciated
Thanks
Vikki

Hi
Thanks both for the replies.
Work has our mail server settings set to 'remove from server immediately' - so I would have some on one and not the other as they will have already been collected.
Does the mail folder need to be in the library folder (or wherever it is - I'm on my PC at the moment so can't see where the actual folder is located) - or can i move it? I have a dropbox account and was just wondering whether i could pop it in there?

Tracking the visible property of a movie clip

Hello,
I am trying to track the visible property of a movie clip as
I need to perform a function when visible = true and another when
visible =false
I have tried to use a listener object but I can’t get
it to work. Can you attach a listener object to listen for the
visible property?
I have also tried an IF statement inside the move clip but
this only knows the state of the ._visible when it first runs.
I have got it to work with an onEnterFrame function on a
movie clip inside the one I want to know the property of but I
don’t like using the onEnterFrame as it uses a lot or
processor speed
Is there an easy way to track the visible property of a
movieclip???
Thanks
Sam.

> thanks for the help but the watch() method doesn't work
for getter/setter
> properties. is ._visible a getter/setter property?
I was afraid of that. Yes, _visible is a getter/setter, most
properties are. Basically watch() only works on read-only
properties and custom variables, which is a shame.
So I don't know of any more elegant way than constantly
checking to see if the value changed. Centralize it and maybe
package it in a nice class and you might feel a little better about
it...

Restoring af:selectBooleanCheckbox value after setting visible=true

Using JDev 11.1; I have a table that displays data from a model object, and one of the columns contains true/false values which we render in the table using an af:selectBooleanCheckbox. All works fine except that user is able to hide the table by expanding other components which sets visible=false on the bounding component for the table. If user elects to redisplay the table by reducing the other component zoom, then the table displays again but the selected check-marks/tags do not return.
Thought initially it might've been because the query was being reissued on the table, but not so. More about the selected attribute on the af:selectBooleanCheckbox, which I have set to the default (false). So the value property is set to the table collection attribute as required to interface with the model, but I need to know what to set the selected attribute to. I can see that when the table is redisplayed, this default value of false is being sent through to the model which is discarding the values I want to retain.
I've tried some EL in the selected property to set it to true/false based on what's in the table, but the problem with that is that it becomes essentially a read-only control. I need to find some way to disable the value assignment when making the table visible again. Any suggestions?
Thanks,

Andrefs,
In ADF BC, one way we deal with this is by adding a transient Boolean attribute to the View Object with getters (translate 0/1 to false/true) and setters (vice-versa). Then, we bind the UI to the transient attribute. It's been so long since I've done EJB's, but could you take a similar approach?
John

Visible Property of lable in Webdynpro

Hi all,
I have a lable and a inputfield which are hide. I want that when a select something in my dropdownbykey, this two objects get visible.
How can i do that?
Regards,
Nirali

Hi,
Please look this code
1.Create one Droupdownkey UI element in your firstView (Droupdown by key is bind to the one value attribute i.e MonthName)along this u can take 2 lable. For 2 lables you can set Visibility (com.sap.ide.webdynpro.uielementdefinitions.Visibility) property.
2. in wdinit() method you can write this code
ISimpleTypeModifiable myType=wdThis.wdGetAPI().getContext().getModifiableTypeOf("MonthName");
IModifiableSimpleValueSet values =myType.getSVServices().getModifiableSimpleValueSet();
values.put("Vijay","Vijay");
values.put("Kalluri","Kalluri");
wdContext.currentContextElement().setMonthName("Vijay");
wdContext.currentContextElement().setKalluri(WDVisibility.NONE);
wdContext.currentContextElement().setVijay(WDVisibility.NONE);
3.in Droupdownby key having OnSelect event in that place you can create on method. Under method you can write this code.
String firstName = wdContext.currentContextElement().getMonthName();
wdComponentAPI.getMessageManager().reportSuccess("First Name:"+firstName);
String lastName = wdContext.currentContextElement().getMonthName();
wdComponentAPI.getMessageManager().reportSuccess("Last Name:"+lastName);
if(firstName.equalsIgnoreCase("Vijay"))
wdContext.currentContextElement().setKalluri(WDVisibility.VISIBLE);
wdContext.currentContextElement().setVijay(WDVisibility.NONE);
else
wdContext.currentContextElement().setVijay(WDVisibility.VISIBLE);
wdContext.currentContextElement().setKalluri(WDVisibility.NONE);
Hope this helps u.
Best Regards
Vijay K
Edited by: VijaySAPEP on Jan 4, 2012 4:47 PM
Edited by: VijaySAPEP on Jan 4, 2012 7:32 PM

Non-Script Way of Setting Visible Property

Similar Messages

Maybe you are looking for