Non storaged material in Storage Location after mov 653

I have a non storage material.
when the return delivery picking was done SAP let to put a storage location. for this Delivery item category wit has not flagged "Do Not Check Storage Location". So it has to be checked. Its also true that we have Storage location is absolutely necessary, so without storage locatin we cant deliver, but we should have an error message and not let us deliver using a storage location when its a not storaged material.
And the problem is that when you have the material in the storage location you cant do nothing because the material has no storage data.

Hi
For the Return delivery , delivery item category is not flagged with the feild "Do Not Check Storage Location " . It is not checked because a Returns order are mostly created wrf to sales order / billing document/delivery document. So once you copy the data to the returns order and when you do Post Goods Receipt then at that time there is no need to copy the sloc.
But ,if the material doesn't have storage data then we cant retrieve how much stock is available in storage locations. So we have to run the report to know how much stock is available in the storage location
Regards
Srinath

Similar Messages

Material location after movement 303

Hi everyone,
I executed the movement 303, the material got out from the origin center and didn't get into the destiny center. However, I can't find it anywhere. It does not appear in transit trough MB5T, nor in the detail of the register in MMBE. Is there anywhere else I can look for it?
I appreciate any help.
Regards.
Marcelo Buosi

Hi,
You can look into the transaction MB52.
After the 303 movement, the material will be seen at plant level (receiving) in "Transit/Transf" column in MB52.
Thanks & Best Regards,
Devendra Gaware
PS - Reward if useful

JSplitPane getting Divider Location after Move

How can I get the location of the divider after the user moves it. The code below is 1 move behind.
   final BasicSplitPaneUI paneUi = (BasicSplitPaneUI) questionsSplitPane.getUI();
    paneUi.getDivider().addMouseListener(new MouseAdapter()
      public void mouseReleased(MouseEvent e)
        questionsChartDividerLocation = paneUi.getDividerLocation(questionsSplitPane);
    });Use Case:
Starting location = 60;
User Moves to 90;
questionsChartDividerLocation = 60;
User Moves to 70;
questionsChartDividerLocation = 90;

How can I get the location of the divider after the user moves it.The divider location can also move when the user resizes the frame. If the size of the split pane is changed the the size of each component added to the split pane may change depending on how the "resize weight" property of the split pane is set, which in turn will cause the divider to change location.
So if you want to know about any change in location of the divider then you should probably be using a PropertyChangeListener (not a MouseListener) and handle the "dividerLocation" property change event. Using this approach you won't need to worry about using the invokeLater() method.
Also, why do you you use the UI to get the divider locaton? The split pane has a method for this.

Storage Location for NON valuated material in MIGO

Hi friends ,
I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
Therefore wondering why system is updating Qty for NON-VALUATED material.
Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
All replies are welcome .....
Regards
Shrey

By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

No material is transferred in storage location after confirmation in COR6N.

Dear Master,
When I confirm in cor6n there is movement of goods & confirmation takes place.But there is no transfer of material in storage location & even when the order is checked the delivered QTY is zero.Since my process has 3 confirmation ( i.e 2 milestone & 1 Auto GR ).
Also the material is backflushed.
Kindly suggest

Dear Chintan,
1.Check the Delivered quantity after performing GR(manual/auto GR) for the process order.
2.Assuming you have completed the 2 milestone confirmation and the final confirmation along with auto GR,incase if you are
unable to find the quantity in stock,check for error goods movements in COGI.Only after clearing the 101 error movement,check
the quantity update in the delivered field in COR3.
Check and revert back.
Regards
Mangalraj.S

Stock is not showing in storage location after MIGo

I am not able to see the stock in storage location after MIGO. Please help me where Iam wrong.

Hi Deepak,
while GR , which movement type it should ?
check document for that GR , is it created?
check your stock may be at inspection storage location
Thanks
Bala

Detetion material from storage location

Hi All ,
I wanted to delete a material from a storage location .Can any one suggest me to delete material from storage location other than blocking material for storage location using MM06 .I suppose that it can not done by using MMSC.
Thanks & Regards,
Srikanth P.

Dear,
If you created an material by error and you want to delete that material from the data base you can do it in this simple 4 steps. The only condition is that this material has to have no material movement recorded.
These are the steps:1
1) Flag material for deletion. transaction MM06
2) Run report MMREO001 - Selection of materials flagged for deletion and select the material
3) Run report MMREO050 Archive Materials to archive the material (some customisig settings might be required)
4) Run report MMREO110 Deletion Program for Archiving Materials to delete the material from the database.
These reports are called by the SARA transaction too.
Regards,
Syed Hussain.

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Opening Stock Comapny - Plant - Material - Batch - Storage location Wise

Dear Friends,
I want to do the following report. I will explain the details to you. Pleaes suggest on how to go about it.
1. Since you know that SAP stores stock in a summary form (Plant / Material wise). Our management wants the report on the following hierarchy. (Company - Plant - Material - Batch - Storage). Our management has suggested the following:
a. Create a ZTABLE with the above columns including Quantity (which will contain closing stock quantity).
b. In this calculate and store Closing stock for each month.
c. an insert / update program has to be created for uploading data in the ZTABLE (selection will contain date).
for ex:
When running the program for 31st March 2008. system will take the closing stock stored in the ZTABLE for previous months + March Receipt - March issues. the result will be the closing stock for March 2008.
d. Then a report will be prepared using the ZTABLE and other calculated fields.
Can anyone give me the guideline as to how to go about it. Tables to be used and logic to be followed? Or if any other way the result can be achieved then nothing like it.
The Managements final goal is to have any given date closing stock in the above hierarchy (minimizing the Performance issue... that is why the suggestion of ZTABLE)...
Awaiting for your expert opinions.....
Regards,
Jitesh M Nair

Figured out

Hyper-V Storage Live Migration: Copy instead of move?

Have a 2012 R2 Hyper-V Cluster with a HP MSA 2000 Storage. No storage pools or storage spaces, just 4 LUN's with NTFS Volumes that are all converted to CSV's.
Have to perform VM migration from VM's that resides on a CSV with an underlying RAID 5 volume to another CSV with an underlying RAID 50 volume. Could perform the operation without any error from the failover cluster manager (move - virtual machine storge) on
the VM.
The problem is that when I check C:\ClusterStorage\Volume1 (the old place of the VM) and C:\ClusterStorage\Volume2 (the new place of the VM), all VM files are still in both locations! Apparently, a "Copy" operation instead of a "move" operation
was performed.
- Why are the source files not have been deleted after the successful storage migration?
- Is it safe to manually delete the VM files in C:\ClusterStorage\Volume1?
Thank you in advance for any help.
Franz

Hi FranzSchenk,
To perform a move, FOCM first copys the files over to the new location and then moves the mahine over to the new location with all memory and machine writes before then removing the old files. If the files haven't been removed (this does happen)
it could be permission's that stop the files being removed.
It would be worth checking the running VMs and checking where its pointing for the virtual drives and perhaps look at where its BIN file is for memory and where the XML machine configuration is located. If all are pointing to the new location
then it would be safe to delete the old files.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Hi Michael
Do you have more specific information what kind of permission issue you mean, and how we can correct that? And why is no warning or error message visible or in the eventlogs that the source files have not been deleted during the live strorage migration?
Kind regards, Franz

Row consolidations of same material in storage bins.

Hi Experts,
we have a requirement below,
. Current Process: Inventory Analysts utilize an established query in SQ00 to enable them to perform row consolidations of same material in storage bins to maximize storage bin capacity and create empty storage bins in warehouses .
Example: Row 621 only has 1 pallet and that pallet will fit in row 625(Row) of which only has 31 but the max is 32 in that bin. Again you see bins 725 and S-27(material) only have 1 pallet each and can fit easily in 715 as it only has 15 pallets but can hold 32.
. The analyst take the data from this query and manually create a Row Movement sheet to give to the forklift drivers to perform the assigned movements.
1) is it possible SAP to do automate this task?
2)Can SAP logically determine this equation?
3) Is it possible SAP to generate this spreadsheet and go ahead and create the TO in the background?
Please do the need full ASAP, Quick response is highly appreciated .
Thanks and Regards,
Chiranjeevi

Of course you can do this, but not with SQ based reports.
You will need to code a custom ABAP report.
First you will need to find best matches in storage bins, then use BAPI for TO creation.
You will easily have all the info from the source and destination bins from your matching
table/data. You can search forums for more info on this BAPI, but I can tell you it is pretty
easy to use even for an inexperienced ABAP-er.
I have created a report for this in my company a while ago, but didn't implement automatic
TO creation since we wanted to give our WH people freedom and didn't want to create a huge
amount of TOs which need to be cancelled if WH workers don't have time to perform this action.
But this is a great tool for any warehouse, especially with bulk non-mixed storage types with
a large number of bins.
Regards

Macbook pro storage do not get smaller after cleaning up photos in new photos app

Macbook pro storage do not get smaller after cleaning up photos in new photos app.
How can I delete photos? are they hidden somwhere?

Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.

After upgrading to 8.1 Pro from 8.0 Pro, my Storage Spaces and Storage Pool are all gone.

Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces. I had five storage-space drives using this pool I had
been using them for months with no problems. After upgrading to 8.1 ( which gave no errors ) the drives no longer exist. Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
to create a new Pool and Storage Spaces. If I click the "Create Pool" it does not list the three drives I used previously as available to add.
Device Manager shows all three drives as present and OK.
Disk Management shows Disks 0,1,2,6. The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.
Nothing helpful in the event log or the services.
I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery. I've not gone down that road yet though because it requires separate physical drives to copy everything to
and they want $299 for the privilege.
Does anyone have any ideas? I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work. Or possibly going back to 8.0.
Thanks for your help!
Steve

Hi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using a non-Apple network attached storage device in lieu of Time Capsule

Can anyone suggest the steps one would need to take to have a non-Apple network attached storage device (HPMediavault) recognised by the Airport Utility so that it may be employed for file storage via Time Machine in lieu of a Time Capsule?

Sorry, but TM will not work with third-party NAS - only Time Capsule.
Requirements to use Time Machine
Time Machine is only available with Leopard (10.5.x)
1. External FireWire or USB 2.0 drive
2. Time Capsule
3. Drive shared by a Mac running 10.5 or later using File Sharing
4. Drive shared by a Mac running 10.5 Server
5. SAN volume managed by Apple's Xsan file system
A TM drive must be partitioned with either APM (PPC) or GUID (Intel) and formatted Mac OS Extended (Journaled.)
An Airport Extreme Base Station with a USB drive connected to it can be used with TM but it is not supported by Apple.

My storage say I have 67GB of movies - I cannot find them but want to remove them to create space

My storage says I have 67GB of movies -I am unable to find them. Any suggestions? As I would like to remove them to create space

Hi JPNolan,
Thanks for the question. Based on what you stated, it seems like you are trying to find movies. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
OS X Mavericks: Keywords to use in Spotlight searches
To specify the type, add the text “kind:<type of item>
Movies
kind:movie
kind:movies
Thanks for using Apple Support Communities.
Cheers,
Mario

Non storaged material in Storage Location after mov 653

Similar Messages

Maybe you are looking for