Non-updated Idocs found in Business Information Warehouse
Hi,
I got the following error while trying to load data:
"Non-updated Idocs found in Business Information Warehouse
Diagnosis
IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually. "
Please help me solve this issue.
Hi,
Actually i tried all these options. I updated the idoc manually, and now the following message comes :
"Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
Data packets were found that have not yet been rea "
And the process is on for the past 5hours. Can i do something regarding this?
Similar Messages
-
Idocs error: Non-updated Idocs found in Business Inormation Warehouse
Hi
I have found this error for delta load.
"Non-updated Idocs found in Business Information Warehouse"
I know that if the non-updated idocs found in source system, we can use
BD87 to manual update.
But it is with in the BI.
Can someone please help with steps involved.
ThanksI will suggest you to set the delta load request to red and then reset the delta flag. Reload the last repested delta will include all missing idocs. That way it is much cleaner.
Good Luck,
CL -
R3 to BW Extraction fails: Non-updated Idocs found in Source System
We load data from R3 to BW and this process has been successful for the past few days except last night. The error msg is listed below in between two dashed lines:
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I checked the system connection by right click the source system in the Source System page on BW and selecting "Check" and "Customizing for Extractors" from the context menu and find everything works fine.
Any idea about the IDOC thing?
Thankshi Subray/Bhanu,
With WE05, find some records with yellow status. How to find some missing data here?
With BD87, under BW system folder, there are two folders:
1. IDocs in outbound processing
2. IDoc in inbound processing
Under 1st folder, there is one yellow status folder called "IDoc ready for dispatch (ALE service)", continue to expand another folder called CREMAS under it, there is a blue information line which is "Receiver found , Data filtered , No conversion , No version change".
Under 2nd folder, there is one yellow status folder called "IDoc ready to be transferred to application", continue to expand other two folder under it called "BBPIV" and "RSRQST", find there is a red flash status line which is "No resources, immed. processing not possible: Too few free dialog work" under these two folders.
I need to go ahead to select these two red flash status lines and then press the Process button at the top bar?
Thanks
Message was edited by: Kevin Smith -
Non-updated Idocs found in Source System
Hi Experts,
I am getting an error Non-updated Idocs found in Source System
Plz help me to resolve this issue.Hi
BD87 Update Idocs manually.
1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
Hope it helps -
Problem with non-updated idocs
Hi,
we have a problem after upgrading from 3.5 to 7.0. Lots of extractors end
in an error-message concerning non-updated idocs. Every day several
extractors have this problem. This are not always the same extractors. As
a result we must repair many extractions manually.
I know the procedure of how to repair, but I want te know how I can prevent
extractors from running into this problem in the first place.
Any suggestions?
This is the problem-message that we get...
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs
manually using the Wizard or by selecting the IDocs with incorrect
status and processing them manually.It has been happening on our env as well (BI 7.0 SP 12), time to time one load or the other gets into this problem and it waits yellow for few hrs before turning red.
I can correct the IDOC and move on or run the load again it works fine.. but the process chain gets held up not going to the next stage for hrs..
any resolution on your problem..
thanks
Mayil -
Error 5 occurred when transferring an IDoc to the Business Information War
Hello friends,
We are getting the following error while loading orgunit hierarchy data from R/3 to BW.
Error 5 occurred when transferring an IDoc to the Business Information Warehouse.
Error in send SEND_HIERARCHY_20 of the hierarchy table
We have tried st22, sm37, bd87 but didn't find any error.
Infosource : 0ORGUNIT
Data source : 0ORGUNIT_HR01_HIER
Could any one please guide me to proceed further.
Reply will be higly appreciated.
Regards
SrikanthHello,
We had the same issue but allready solved it.
You need to do a restore of your BI ystem with your source system.
Warning: You need to open up both systems (systems must be modifiable)
The restore will create a Basic idoc type wich now does not exists. (We30)
With regards,
Gary Kirkby
BI consultant. -
Hi Experts,
Error message i get is:
{IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue. Process Idocs manually.}
Please suggest what can be the solution for this issue.
Thank you very much,
NeelHi Shu Moh / Pradip,
I am not able to see the radio button section for assigning points now, is there any problem?
I will not forget to reward points once it is ok.
Thanks a lot for your response
Neel
I was able to reward points.
Basis team is working on this issue, will post once the problem is figured.
Message was edited by: Neel -
Any Fix / Update For Microsoft Office 2013 Free/Busy Information Issue
Any official update / fix regarding the Microsoft Office 2013 Free/Busy Information Issue? (not the workaround I found to uninstall KB2837618
and re-create profile).
Reference: http://helpdesk.missouristate.edu/news/two-microsoft-updates-cause-problems-with-outlook-2013
Thanks a lot,
MosheRefer to the solution which delivery by Hypocrit from another thread with the same topic.
http://social.technet.microsoft.com/Forums/en-US/827a12f0-c785-43df-a71f-0b21aeffa176/outlook-2013-freebusy-fails-after-updates?forum=officeitpro
I've copied the replies below:
"With mfcmapi open your Profile under the Profile->Show Profile
then double-click "Outlook" or how your Profile is named
then double-click "Microsoft Exchange"
then double-click your mailaddress (both) and remove PR_DELETED_FOLDERCOUNT with value SMTP: or correct them"
http://mfcmapi.codeplex.com/releases/view/101020
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
More reference post:
http://social.technet.microsoft.com/Forums/en-US/a926f0b5-0e66-4f43-8ac3-50791df16154/microsoft-office-2013-freebusy-information-issue?forum=officeitp
Tony Chen
TechNet Community Support -
Business connector developer-Error message 'No IDOC found in input'
Hi,
Please note that this query is related to business connector developer not to XI.
I have created a flow service based on an IDOC. When I tried to test the service from the business connector developer it gives me an error 'No idoc found in input'. I have done the setting based on the business connector configuration guide. The idoc also send to the port successfully.
Can anyone guide me how to trigger the test from business connector developer for an idoc.
Thanks
Jim.
Edited by: Jim Jose on Jul 13, 2011 5:58 PMHi,
Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
Regards,
Prasobh -
HT2534 i can't found the optione "None" in the options of billing information,what can i do ?!!!
i can't found the optione "None" in the options of billing information,what can i do ?!!!
You are creating a new account ? If you are then you didn't follow, exactly, the instructions on that HT2534 page when you created it - I've just tried those instructions and I got the 'none' option on the payments screen.
Creating an account without giving credit card details : https://discussions.apple.com/message/24321860#24321860 -
I'm trying to find the none option to cancel my CC information as it's not working and i want to update my App .
please helpUnfortunately, AT&T does not allow installation of non-Market apps on any of its Android phones.
You can find instructions online for using the "adb" developer tool to install non-Market apps, or you can wait for an upcoming beta release of Firefox which will be distributed through the Android Market, probably within the next month. -
[Forum FAQ] Why can't I retrieve Free/Busy information
Free/Busy information is a feature of Microsoft Outlook that allows you to see when others are free or busy so that you can efficiently schedule meetings. You can use Microsoft Outlook to publish Free/Busy information to any server
your and your coworkers have read/write access to. However, in some cases you’ll notice that you can’t retrieve Free/Busy information correctly from Outlook. You can try the below methods to troubleshoot and get the Free/Busy information again.
Since most users who often use this feature are using Exchange, all the information in this content is only based on Exchange.
General troubleshooting methods:
Method 1: Start Outlook using the ‘/cleanfreebusy’ command line switch
Method 2: Logon OWA to see if the Free/Busy information shows correctly
Method 3: Check the user’s Permission Level when only one user’s Free/Busy information can’t be displayed
Other causes
Autodiscover has not been setup correctly
Updates
Here are the detailed steps and explanation of each method and cause.
Method 1: Start Outlook using the ‘/cleanfreebusy’ command line switch
With the ‘/cleanfreebusy’ switch, it will clear and regenerate free/busy information when Outlook starts, sometimes this process fixes the problem that Free/Busy information doesn’t display correctly, and this is always the first thing we should try when
we can’t get the Free/Busy information from Outlook.
This switch can only be used when you are able to connect to your Microsoft Exchange server.
To start Outlook using the switch, we can press Win Key +
R to start Run, type ‘outlook.exe /cleanfreebusy’ in the blank box, then press
Enter.
Please note since Outlook 2013 only uses the availability service which is connected to Autodiscover, the command line switch ‘/cleanfreebusy’ has been removed as well as the associated code so that Outlook 2013 will not recognize this
command.
Method 2: Logon OWA to see if the Free/Busy information shows correctly
If you are using Cached Exchange Mode in Outlook and having trouble getting the Free/Busy information, please logon OWA, or switch to Online Mode to see if the Free/Busy information shows correctly.
If the Free/Busy information shows correctly on OWA or in Online Mode, this problem may be caused by the Outlook Data File(.ost) corruption, which leads to the sync failure. Therefore we should exist Outlook, browse to the Data File and rename it to “.old”.
The next time Outlook starts, it will regenerate a Data File to sync and we can check if the Free/Busy information can be retrieved.
The location of the Data File can be found from File tab ->
Account Settings -> Account Settings ->
Data Files tab. (Outlook 2010 and Outlook 2013)
Or Tools menu -> Options ->
Mail Setup tab -> E-mail Account -> Account Settings window ->
Data Files tab. (Outlook 2007)
If on OWA it displays fine but doesn’t show the information correctly in neither Cached Exchange Mode nor Online Mode, it may be caused by the firewall or anti-virus settings, disable them to verify if they caused the problem.
Method 3: Check the user’s Permission Level when only one user’s Free/Busy information can’t be displayed
When a user has set his Calendar Permission to None, other people will not be able to see his Free/Busy information. When we notice that we can get most people’s Free/Busy information but fail to get one specific person’s, please consider
to check his Calendar Permission:
In that user’s Outlook, right click on his default Calendar, click Properties, select
Permissions tab.
We need to at least switch the Permission to Free/Busy time to get his Free/Busy information correctly.
Other cause 1: Autodiscover has not been setup correctly
From Outlook 2007, Outlook uses Autodiscover to get the Free/Busy information. Once Autodiscover has not been configured properly, the Free/Busy information may not display correctly. If you are also seeing issues with Out of Office assistant, we may assume
that you haven’t correctly setup Autodiscover, since these two symptoms are common when Autodiscover is not configured correctly.
To verify that, please test Outlook Autodiscover Connectivity:
http://technet.microsoft.com/en-us/library/bb123573.aspx
We can also learn Configure Exchange Services for the Autodiscover Service from:
http://technet.microsoft.com/en-us/library/bb201695.aspx
Since Autodiscover Service is more Exchange related, we need to seek Exchange support and post the question in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Other cause 2: Updates
Although Updates from Microsoft do no harm to the system for most of the time, the updates sometimes can mess things up.
Outlook 2013 November 2013 security update once became the culprit that caused some users not able to retrieve Free/Busy information from calendar scheduling. This occurs because Autodiscover fails for Exchange 2007 configurations. So in fact, this also
refers to the previous reason, Autodiscover is corrupted.
The fix for the issue above has been released:
http://support.microsoft.com/kb/2850061/en-us
Once you have some issues after updating and doubt it’s an update issue, you can always come to our forum to ask if there’s a recent update which causes the problem, we will be happy to support you. If a fix hasn’t been released yet, we suggest you uninstall
the suspicious ones from Control Panel -> Programs and Features ->
View installed updates to verify which caused the problem, also as a workaround.
Summary
The reason that we can’t get the correct Free/Busy information can vary. If you find it doesn’t work even after several general troubleshooting steps, please consider it’s Autodiscover related. For anyone who comes up against the issue that Free/Busy information
can’t be retrieved, please feel free to visit Outlook IT Pro Discussions from the URL:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook, we will be glad to help you.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.You should be charged, but that confirms the account. Same behavior with the app store...have to give login info evem for free downloads.
-
Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
Free/busy information unavailable in Outlook 2013 on Windows 8.1 on Exchange 2010
Hi,
This has been discussed a lot inf forums but unfortunately having followed all the guides I have found, I can't resolve it. I am the only user with the issue.
I have primarily followed https://social.technet.microsoft.com/Forums/office/en-US/ee9e1b89-bea1-48aa-9008-cae205c5e816/forum-faq-why-cant-i-retrieve-freebusy-information?forum=outlook
including recreating my profile, installing http://support.microsoft.com/kb/2850061/en-us via
Ofifce 2013 SP1, verifiying the funtion works through OWA etc etc.
I have the full version of Office 2013 Pro not the Click to Run version. It seems to be the Outlook client itself not the Exchange server. I am at a loss what to do next... please help! :)Hi,
Please also enable Automatic Replies in Outlook, check if this feature works well.
Since the issue only occurs to one client and it works on OWA, I suggest you try these steps below to troubleshoot the issue:
1. Start Outlook in Safe Mode. It is always a helpful method to troubleshoot Outlook client issues, when in Safe Mode, Outlook doesn't load with add-ins, we can check if this issue persists when add-ins are disabled:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
If there's no issue in Safe Mode that you can find free/busy information again, disable the suspicious add-ins to verify which one caused the problem.
2. Perform a clean boot. This helps determine whether the issue is related to some background programs, any 3rd-party programs will be disabled. If the issue doesn't occur in Clean Boot, then we may suspect it's related to some 3rd-party programs, the detailed
steps can be found in this link below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I have looked for hours and hours on Google and this web site for this type of issue and nothing seems to help.
Problem:
On my new Windows 2008 R2 /Exchange 2010 server with IIS7 installed, I can use Outlook 2010 client to login and send and receive e-mail but when I try to busy search internal Exchange users I get no information (cross-hatch), but the sender of the Meeting Request
can see their own free/busy information fine. And OWA users can see free/busy information fine, as can Outlook 2003 client users against this Exchange 2010 server when logged in.
I don't know if I have a certificate problem with regard to IIS7 or Exchange 2010, I did not create my own certificate , it is just what was installed by default when I installed and configured Win2K8 server, IIS7 and Exchange.
On the Windows 7 workstations with Outlook 2010 client, I am not logging into the Exchange 2010 server DNS domain, if that makes any difference. On these workstations I can ping "autodiscover.my.exchange.server.com" and my.exchange.server.com
with no problem. I even used this Microsoft KB to install a new _autodiscover dns entry, but it did not help :
When I turn on logging on my Outlook 2010 client, I see this in my C:\Users\Administrator\AppData\Local\Temp\1\outlook logging\20131208-135658864-fb.log :
2013/12/08 13:56:58.864: Getting ASURL
2013/12/08 13:56:58.864: URL returned from cached autodiscover: blah blah
2013/12/08 13:56:58.864: Request to URL:
2013/12/08 13:56:58.864: Request action:
2013/12/08 13:56:58.864: Request XML: <?xml version="1.0"?>
2013/12/08 13:56:59.051: Request sent
2013/12/08 13:56:59.051: Response error code: 00000000
2013/12/08 13:56:59.051: HTTP status code: 0
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: There is an error in request/response.
2013/12/08 13:56:59.051: XML response:
2013/12/08 13:56:59.051: -------------------------------
2013/12/08 13:56:59.051: Getting ASURL
2013/12/08 13:56:59.644: Failed to get ASURL. Error 8004010F
At an Exchange shell console I enter this command and get these results :
Exchnage Management Shell :
VERBOSE: Connecting to BPExchange2010.my.exchange.server.com
VERBOSE: Connected to BPExchange2010.my.exchange.server.com.
[PS] C:\Windows\system32>Test-OutlookWebServices -id:[email protected] -TargetAddress:[email protected]
ll.com
RunspaceId : c929eacd-d53c-49d7-8532-c4b74e61b8be
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is
Type : Success
Message : [Server] Successfully contacted the UM service at https://bpexchange2010.my.exchange.server.com/ews/exchan
ge.asmx. The elapsed time was 234 milliseconds.
[PS] C:\Windows\system32>
** Also frequently when I log into Outlook 2010 client and start to send a meeting request , I get the Security Alert dialog :
autodiscover.my.exchange.server.com
Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
Green Check Mark : The security cerficate is from a trusted certifying authority
Green Check Mark: The security certificate date is valid
Red X : The name on the security certificate is invalid or does not match the name of the site.
Do you want to proceed ? . I either import the certificate or click YES, but does not help this issue.
NOTE: Each user that shows as NO INFORMATION cross-hatch, these users have appointments and have logged into outlook before.
When I do this autodiscover url from a Windows 7 pc with outlook 2010 I get :
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="14:47:01.5656198" Id="401440650">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Can anyone assist ? What am I missing ?
Thank You
NOTE: When will this go away. I had to strip out a lot of helpful information to post this. "Body text cannot contain images or links until we are able to verify your account."Hi,
How many users encounter this issue, all users with Outlook 2010 or some specific users?
According to your post, the Error code 600 indicates that your Autodiscover service is working well. as for the certificate mismatch issue, we can also following the KB below to resolve it:
http://support.microsoft.com/kb/940726/en-us
The Free/Busy information in Exchange 2010 is using the Availability service to
retrieve it. Please directly access
https://mail.mydomain.ae/EWS/Exchange.asmx in IE and see whether a proper XML file is returned.
Or we can go to
https://testexchangeconnectivity.com and check MS Exchange Web Services Connectivity Tests.
Thanks,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
HT1414 iCloud backup window will not close . . ? stays open and block main screen use
popup window warning "iCloud backup" will no click off . . blocking opening main page . . . cannot shut down.
-
My iPhone 6 doesn't work with Audi MMI adapter
When I try to connect my iPhone 6 to the Audi MMI adapter in the glove compartment of my 2015 Q5, it shows up as a source on the media screen, but says there are no playable files.
-
Why is the new Safari (7) not letting sound be heard from Soundcloud widgets (players) on my website when the earlier Safari worked fine, and other browsers also work fine?
-
How can i bypass a piece of code which checks if its a creation mode of sales order ? Is there a sytem variable using which i can do that ?? Like the way we have in ECC SY-TCODE or T180-TRTYP ???
-
I want to upgrade my desktop (and maybe laptop) from LR3 and PS CS5 to latest versions, and also install LR(latest) on wife's desktop? What's the most economical?