Not able to access Central admin or any other site

My machine name has been changed from abc-xyz to DT-012
After changing my machine name am not able to access Central admin or any other site in sharepoint. which says '
Server Error in '/' Application.'
Please tell me after changing machine name what else i have to change so i can access my SharePoint back.

Hi Niraj, 
Thanks for posting your issue, Just wanted to know have you changed server name  using below mentioned command?
stsadm -o renameserver -oldservername oldservername -newservername newservername
I hope, you have not changed your SQL Server name/instance. If changed SQL too. Kindly re-run the configuration Wizard of SQL server to set up Alias.
Also, Browse below mentioned URLs to know more about the fixes of this issue
http://www.ericjochens.com/2013/03/change-sharepoint-server-hostname-and.html
http://www.bluesphereinc.com/blog/renaming-a-sharepoint-20102013-server/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Similar Messages

  • HT1695 My Wifi is connected however im not able to access internet nor email any help

    My Wifi is connected however im not able to access internet nor email any help

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • I've logged into Adobe and the video tutorials do not run, video's will run on any other site

    I've logged into Adobe and the video tutorials do not run, video's will run on any other site

    Which operating system and browser versions are you using?

  • Not able to access personal information in various Web Sites eg.Wish List in Amazon

    In web sites such as Amazon and eBay when I left click on 'wish list' or 'My eBay' or left click to try to 'sign out' there is no response. Even on this page I am not able to sign out

    Hi Srinath,
    I have checked that as well, it is showing the IPM_server in running mode.
    Also it doesn't show any deployment failure in the command line. Here is what it shows:
    <May 20, 2013 10:32:51 AM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
    ebLogic Managed Server "IPM_server1" for domain "base_domain123" running in Deve
    lopment Mode>
    <May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
    ate changed to RUNNING>
    <May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
    arted in RUNNING mode>
    I feel there is some issue as this log is suggesting:
    ####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    But I don't know how to resolve it.
    Thanks
    Pradeep

  • I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

    I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

    Known bug.  Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

  • Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

    am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

  • I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    varunsharmaapplefan
    http://support.apple.com/kb/ht5209 might help you.  An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror.  If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music.  You should have no problem playing your iTunes over airplay though.
    This may also help http://support.apple.com/kb/HT4437
    Regards
    Jules 

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • HT1600 Im not able to access itunes movies or netflix.  it just keeps circling and can't purchase a movie. Any suggestions?

    any help regarding itunes and apple TV not able to access tonight. cursor keeps circling on screen so cannot purchase a movie.  Any suggestions?

    Check speed using speedtest.net
    Check for interference using istumbler or netstumbler
    Male sure you are using ISPs DNS (settings- network- configure DNS - automatic )

  • I am not able to access any of my music.

    I am not able to access any of my music in my library.  It keeps saying could not be used because original file could not be found.  What next?

    The iTunes application doesn't actually contain your music, it points to a folder of music stored your computer.
    Did you recently update iTunes or "organize your music?" You might have to point iTunes at the music folder again or undo any changes that you made to the folder.
    Check out this document that Apple created -> No content shows up in iTunes after updating.
    WTH.

  • Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

  • Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
    (97189)

  • HT204053 hi there. my phone was stolen and i have heaps of notes that i need to access, but i'm not able to access my notes via the cloud, any tips on how to do this? thanks

    hi there. my phone was stolen and i have heaps of notes that i need to access, but i'm not able to access my notes via the cloud, any tips on how to do this? thanks

    i'm not able to access my notes via the cloud
    If your notes sync with your icloud account, you can access them at www.icloud.com

  • Not able to access the application through URL in clustered environment.

    Hi,
    I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
    Now I am able to access the application through the managed server name with port number but not able to access through URL.
    For ex
    http://machine1:7001/test/login.do?m=begin
    this is accessible
    If I use
    http://test.domain.com/test/login.do?m=begin
    Then application is not accessible.
    any HTML or JSP page page is in reach by both the URL.
    Please suggest me what should I do in this regard.
    thanks
    singhV

    Hi Syed,
    I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
    And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
    (The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
    Thanks
    Amith

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

Maybe you are looking for

  • Group Calendar - display of names

    Hi, if you share your calendar with many users the display of user names as <FirstName> <LastName> becomes confusing. Our users requested <Lastname>, <FirstName> as preferred display. Is it possible to modify this? TIA, Michael

  • Query Needed for Partitioning table

    Hi, I have created a table called Test. There is a column named business_name. There are several businesses like ABC,BCD,ADE.... There will be lakhs of rows corresponding to each business, i mean there will be lakhs of entires corresponding to ABC,BC

  • CR XI R3:  Issue exporting shared variable to Excel - with workaround

    Hi, I have a report that uses a subreport to calculate a field based on the existance (or not) of data in a database other than the main report database.  When I use a shared variable to pass this field back to the main report and display it on a det

  • IPhoto screensaver missing after upgrade to Snow Leopard

    I have 3 Macs, all upgraded to Snow Leopard at the same time last year. For some reason one of them no longer has the iPhoto screensaver available from System Preferences. It's also not available as a choice for desktop picture. All 3 computers were

  • InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames.

    Hi, I'm running InfoPath 2013 Designer and I'm experiencing a very annoying bug. Whenever I try to open a Infopath file I get the error, "InfoPath cannot load the view. The view may have been modifed to contain unsupported HTML such as frames." Somet