Not able to configureODC with database ODC closes automatically

Hi,
i have installed ODC but when i am configuring it with sql database ODC closes automatically. I have reinstalled it several times but issue persist.

Hi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

Similar Messages

Datareader is not able to connect with database-Urgent

Hi All,
All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
Module finished after a runtime of 00:00:00.2031339 with exit code -2
Module failed due to negative exit code of -2
It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
Subscription:Enterprise,
LOCATION: East Asia
Regards,
Biswajit

Hi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

Not able to connect with Sql Server Database

Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj Goel

Hi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel

Enterprise manager is not able to connect to database instance

Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?

user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

Hi Coreenfrombc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Not able to connect linux database instance in another machine

Hi,
I have installed oracle 10g database server in Linux, and i created one database instance. and i have added tns entry and listener entry.
I am to connect the database on that machine. but not in different machine. i am able to access/ping linux machine in another machine also.
while creating tns entry for linux database instance in another machine using "netca" i am getting this error.
Connecting...ORA-12560: TNS:protocol adapter error
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
I verified listener and tns entry ( i think for this listener configuration is enough) also. and database is up.
If anybody knows why i am not able to connect linux database in another machine. is there any network configurations other than listener configuration.
Thanks in advance.

yes i tried to connect with ORACLE_SID, its successful. and using tnsname like you said.
Instead of using netca to create the tnsnames.ora entry on the second server, copy the tnsnames.ora entry from the DB server. Then use tnsping to test connection :-i done above but not able to ping the tns name, i am getting this error.
TNS-12560: TNS:protocol adapter error
------------------------------------------------

Not able to connect RAC database from client

Hi there
Recently I have configured RAC in test environment. version 11.2.0.1. OS Redhat 5.9. Everything seems to be fine except not able to connect rac database from client. Error is as under :
C:\Documents and Settings\pbl>sqlplus test1/test1@myrac
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 17 14:29:06 2014
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name:
myrac =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = rac-scan)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = racdb.testdb.com.bd)
Please give me your valuable suggestion to overcome the issue.
Regards
Jewel

user13134974 wrote:
ORA-12545: Connect failed because target host or object does not exist
This error means that the hostname or IP address used in the TNS connection string, failed to resolve or connect.
Your client is making two connections. The first connection is to the SCAN listener. It matches a db instance for your connection request based on service requested, available registered service handlers, load balancing, and so on. It then send a redirect to your client informing it of the handler for that service.
Your client then does a second connection to this service (a local RAC listener that will provide you with a connection to the local RAC instance). This is what seems to be failing in your case.
The SCAN listener's redirect uses the hostname of the server that the local listener is running on. Your client needs to resolve that hostname (of a RAC node) to an IP address. This likely fails.
You can add the RAC node hostnames to your client platforms hosts file. The appropriate action however would be to ensure that DNS is used for name resolution instead.

Not able to Login with PS

hi folks, i am not able to login with PS/PS in the Datamover and app desingner. It gives me the errore that the user name is not valid. My psdbowner table does not have any entry about the owner of my DB even after running the dbowner.sql. i tried to update this table but it gave me the message that no rows updated.

<s>SYSADM is nothing but an Oracle user, when connecting with this user in DataMover, it's bootstrap mode. PS is different, whether it's an Oracle user, it should be locked, PS is also an application user (should exists in PSOPRDEFN). The latter is used when connecting to DMS/AppDesigner.
1. Check the connectivity properties in Configuration Manager: connectid=people, connect password=peop1e
2. Try to connect onto the database with people and check if you can select from tables PSACCESSPRFL, PSOPRDDEFN and PSDBOWNER
3. From within the database, check the owner of the table PSDBOWNER (should be PS which must be locked).
And please, try to give the answers to the questions above (what update statement...). If that's a fresh install, or you've missed some steps, or something went wrong during the initial load (check the logfile).</s>
Due to the lack of information, I was going to the wrong way. Fortunately for Hick, Hakan rightly pointed out the step of the installation. And yes, PS Oracle user account is locked and nothing wrong to have PSDBOWNER empty at this stage, it is filled up when load the very first dms (there's a statement like INSERT INTO PS.PSDBOWNER VALUES...). I think some documentation reading here should not hurt.
Sorry, but I'm really fed up with people providing too few information (or no information at all) about their situation. I give this thread up.
Nicolas.
Edited by: N Gasparotto on Jan 15, 2013 1:30 PM

I am not able to shutdown the database by using stopsap

Dear all,
As mentioned in the subject "I am not able to shutdown the database by using stopsap". I am getting the following errors:
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
        0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox9.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist
R3 is terminated correctly by using the command stopsap and also I am able to shutdown the database normally by using the SQL command.
Thanks for your cooperation.
Maher

Thank you Nick for your care.
I will test start/stop manually later; because the system is active and used by the users for testing purpose (not production).
Yes, LIBPATH is the same for both users.
The ownership/permisssion for the both files is
-rwxr-xr-x   1 <SID>adm   sapsys    stopdb
-rwxr-xr-x   1 <SID>adm   sapsys    startdb
I compared with production, it seems ok.
I started DBCheck by using the transaction DB13 and also it failed due to same errors.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000272, user name ****)
No application server found on database host
Execute logical command BRCONNECT On host *******
Parameters: -u / -c -f check
BR801I BRCONNECT 6.20 (113)
exec(): 0509-036 Cannot load program oracle<SID>because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR805I Start of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.04
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location db_connect-2
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location thr_db_connect-4
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
BR806I End of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.07
BR280I Time stamp 2004-08-11 08.27.07
BR804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Do you think that we need to rebuild the Oracle Software ?
Thank in advance for your cooperation.
Maher.
Message was edited by: Maher M.

I am not able to connect with Itunes Match. I constantly receive the message error 4010

I am not able to connect with Itunes Match. I constantly receive the error 4010.

I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me.

I am not able to connect with another ipod via bluetooth can u pls help me

i am not able to connect with another ipod via bluetooth can u pls help me

Are yo trying to pair via an app that supports BT pairing? If you are I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

BAPI not able to connect with Livecache

Hello All,
   I am using "BAPI_PIRSRVAPS_GETLIST" .
   But not get pegging detail. When I debug it is not able to connect with livecache.
   How to use BAPI FM in Program, How to connect with livecache ?
   Anybody has sample ABAP program for this ?
Thanks in Advance
Amisha

Hi All,
When I try to use BAPI <b>BAPI_PIRSRVAPS_GETLIST</b> I am not getting pegging information, please help me.
Thanks,
Srinivasa.

Not able to connect with iTunes

its has been 6 days already and i am not able to connect with itunes to purchase something.
i have used visa and mastercard and i also have money credited to my account.
please help!

Hello FoxyNix
Check out the steps below to troubleshoot you issue with connecting to the iTunes Store on your iPhone
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.  Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular. Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Regards,
-Norm G.

Not able to configureODC with database ODC closes automatically

Similar Messages

Maybe you are looking for