Not able to execute Configure Weblogic Domain script

Hi Experts,
I am trying to configure weblogic domain for odi.I have installed odi studio and weblogic server on WINDOWS 2008 SERVER R2 release(64 bit) and jdk - 1.6 update 22 (32 bit)
When i try to execute config.cmd it fails with following error:
c:\odi\mw_home\wlserver_10.3\common\bin>config.cmd
The system cannot find the path specified.
Please help me figure out what could be the problem.

Reinstallation fixed the problem.

Similar Messages

Configuring Weblogic Domain in Offline Mode

Hi,
I wrote a java code which invoke wlst command required for configuring weblogic domain in offline mode.
please give any idea even i do not know exactly what are the required jar file but i have used weblogic.jar,wlfullclient.jar,jython.jar,and some jar files from modules folder which has given in someone post
i am getting the following error
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.scripting.utils.WLSTUtil.initOfflineContext(WLSTUtil.java:291)
at weblogic.management.scripting.utils.WLSTUtil.setupOfflineInternal(WLSTUtil.java:267)
at weblogic.management.scripting.utils.WLSTUtil.setupOffline(WLSTUtil.java:234)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:134)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:76)
at DomainConfiguration.<init>(DomainConfiguration.java:15)
at DomainConfiguration.main(DomainConfiguration.java:61)
Caused by: java.lang.NoClassDefFoundError: com/oracle/cie/wizard/ControllerProxy
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.getMethod0(Class.java:2670)
at java.lang.Class.getMethod(Class.java:1603)
at com.oracle.cie.domain.AbstractManager.getInstanceObject(AbstractManager.java:88)
at com.oracle.cie.domain.AbstractManager.load(AbstractManager.java:46)
at com.oracle.cie.domain.ConfigManager.<clinit>(ConfigManager.java:37)
at com.oracle.cie.domain.DomainConstants.<clinit>(DomainConstants.java:20)
at com.oracle.cie.domain.script.jython.WLScriptContext.init(WLScriptContext.java:220)
at com.oracle.cie.domain.script.jython.WLScriptContext.setup(WLScriptContext.java:162)
at com.oracle.cie.domain.script.jython.WLST_offline.setupContext(WLST_offline.java:105)
... 11 more
thanks in advance

Hi,
Make sure that you have weblogic.jar and jython-modules.jar
You will find weblogic.jar under %BEA_Home% / server / lib
and you will find jython-modules.jar under %BEA_Home% / common / wlst/modules
Regards,
Kal

Not able to start the weblogic server ....

Hi All,
I am using JDeveloper 11.1.1.6 .
I am not able to start the weblogic server .I am getting below Exception .I am not sure where I need to check,,
Error at line:2333 col:31 '' expected a valid beginning name character
at weblogic.xml.babel.scanner.Name.read(Name.java:33)
    at weblogic.xml.babel.scanner.Name.read(Name.java:20)
    at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:58)
    at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
    at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
    at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
    at weblogic.xml.babel.baseparser.Space.parse(Space.java:19)
    at weblogic.xml.babel.baseparser.BaseParser.parseElement(BaseParser.java:474)
    at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:326)
    at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)
    at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctionParameters(StaxPolicyStoreParser.java:2207)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2135)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:276)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:209)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:492)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:276)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
    at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2827)
    at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2821)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2821)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Jul 19, 2013 11:11:09 AM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: Cannot read from policy store. Reason is PolicyStore Error, javax.xml.stream.XMLStreamException: Error at line:2333 col:31 '
Thanks ...

hi user,
did you check this.
diehn.net/blog &raquo; Blog Archive &raquo; Weblogic AdminServer refused to start &#8211; truncated syste…

Not able to start Integrated Weblogic server

Hi All,
I have installed Jdeveloper & Weblogic server in my system. I am able to deploy my SOA peojects in em console. But when i try to run a JSF project , it is throwing an error message like not able to start Integrated Weblogic Server. And Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt. I dont have my middleware in D:\OracleOSB\Middleware, But i have created the Middleware home in D:\Oracle\Middleware.
I reinstalled SOA sutie, Jdeveloper & Weblogic server but stilll then i am getting the same error when i try to start Integrated Weblogic server. Please find below the error message:
*** Using port 7101 ***
C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=D:\OracleOSB\Middleware\wlserver_10.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar;D:\OracleOSB\Middleware\wlserver_10.3\server\lib\xqrl.jar
PATH=D:\OracleXE\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32, compiled mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -Xms256m -Xmx512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\OracleOSB\Middleware\wlserver_10.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -da -Dplatform.home=D:\OracleOSB\Middleware\wlserver_10.3 -Dwls.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Dweblogic.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\OracleOSB\Middleware\oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\OracleOSB\Middleware\oracle_common\modules\oracle.ossoiap_11.1.1,D:\OracleOSB\Middleware\oracle_common\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
[ERROR][cgdir ] Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt: Could not open D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
Process exited.
Can anyone help me to overcome this issue.
thanks in advance.

Try checking the "C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd" startup file. It seems containing old references to D:\OracleOSB instead of D:\Oracle ...

Not able to execute scenario in RA 14.0

Problem Summary
Not able to execute scenario in RA 14.0
Problem Description
[oracle@dev-rtlrmadb src]$ ./SIL_RetailLoadControlSeedData.ksh
OracleDI: Starting scenario SIL_RETAILLOADCONTROLSEEDDATA 001 in context DEVELOPMENT_INSTALL ...
2015-02-08 12:01:01.026 ERROR ODI-1217 Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with return code 7000.
2015-02-08 12:01:01.099 ERROR ODI-1134 Agent Internal encountered an error: ODI-1217: Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with eturn code 7000. Caused by: ODI-1226: Step RA_Log_Error_File fails after 1 attempt(s).
When checking in $MMHOME/error directory , the log is showing following error :-
Package Name-> SIL_RETAILLOADCONTROLSEEDDATA
Step Name-> SIL_RetailInitial_C_ODI_PARAM_Load
Error Details->
ODI-1226: Step SIL_RetailInitial_C_ODI_PARAM_Load fails after 1 attempt(s).
ODI-1240: Flow SIL_RetailInitial_C_ODI_PARAM_Load fails while performing a Loading operation. This flow loads target table C_ODI_PARAM.
ODI-1228: Task SS_0 (Loading) fails on the target ORACLE connection ORACLE_BI_APPLICATIONS_RA_INSTALL.
Caused By: java.sql.SQLSyntaxErrorException: ORA-01918: user 'radm01' does not exist
DB user exists. I'm able to login via sqlplus. Have checked in Physical schema and Logical schema also. All required Data Servers exeists in Topology -> physical / locical schema-> oracle. and tested the connection every thing is working properly.
Error Codes
ODI-1226 , ODI-1240 , ODI-1228 , ODI-1217 , ODI-1134 , ODI-1232
Problem Category/Subcategory
Retail Merchandising Analytics Issues
Uploaded Files
Template Question Responses
1) ### Steps to Reproduce ###
Go to $MMHOME/src .
Execute the ./SIL_RetailLoadControlSeedData.ksh from prompt. This gives the mentioned error.
I'm currently configuring Oracle Merchandising Analytics 14.0 . Referring guide " Oracle® Retail Analytics Installation Guide Release 14.0 E50594-05 ".
I'm at step number 11 ,
page no 58.

Please help. Its urgent.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan Muthuraman

Hi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not able to install Bea Weblogic RFID Edge Server in solaris10

Hi,
I am not able to install Bea Weblogic RFID Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this issue

Hi,
I am not able to install Bea Weblogic RFID
Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this
issueWhat is the output of " file fid_edge220_solaris32.bin".

We are not able to execute below procedure, plz help me ASAP.

Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;

Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

I am not able to execute the transport.send(message)

I am not able to execute the transport.send(message) when trying for sending mail. I am getting error like this : -
javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 10.175.80.50, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect
Please help me on this to resolve this issue asap. thanks

Hi Vinod,
public void SendMail( )
    //@@begin SendMail()
          // Specify the host name of the mail server
          String host ="----
          IWDMessageManager messageMgr = wdControllerAPI.getComponent().getMessageManager();
          // Initialize Session
          Properties props = System.getProperties();
          props.put("mail.smtp.host", host);
          props.put("mail.smtp.auth", "true");
          Authenticator auth = new Auth();
          Session session = Session.getInstance(props, auth);
          // Create new MimeMessage
          MimeMessage message = new MimeMessage(session);
          try
                // Set the From Address
                String from = wdContext.currentContextElement().getCtx_From();
               message.setFrom(new InternetAddress(from));
               // Set the To Address
               String to = wdContext.currentContextElement().getCtx_To();
               Address ar[] = new Address[1];
               ar[0] = new InternetAddress(to);
               message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
               // Set the Subject
               message.setSubject(wdContext.currentContextElement().getCtx_Subject());
               // Set the Text
               message.setText(wdContext.currentContextElement().getCtx_Text());
               Transport tr = session.getTransport("smtp");
               tr.connect("Put again here Host Name", Port Noumber, "userid", "password");
               tr.sendMessage(message, ar);
          }catch (AuthenticationFailedException e){
               messageMgr.reportException(e.toString(),false);
          }catch (AddressException e)     {
               messageMgr.reportException(e.toString(),false);
          } catch (MessagingException e) {
               messageMgr.reportException(e.toString(),false);
          }catch (Exception e){
               messageMgr.reportException(e.toString(),false);
    //@@end
And also create the class Auth() like
public class Auth extends Authenticator {
     public PasswordAuthentication getPasswordAuthentication()
          String username = "userID";
          String password = "Passwod";
          return new PasswordAuthentication(username,password);
Please check it i think i will work. Also please use constant value for the to, from, subject and text.

Not able to create a new domain through ant task

Hi,
I have to upgrade weblogic 8.1 to weblogic 10.3 and I am using vanilla version of it. the first step to it is to create weblogic domain and then configure it and then start teh server and then deploy it. The problem starts when I am creating the domain, I am using ant task for domain creation and following these steps
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/programming/ant_tasks.html
when ant-task is trying to build the specified domain, it is looking for some config.xml and that config.xml should also generated by wlserver/ant task through a template. I have no idea, where and how to define that template.. hence getting following error.. tried hard but not able to get through. can anyone please help..
Thanks in Advance
Error stack trace:
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:27 PM IST> <Info> <Management> <BEA-1
40013> <C:\WIRES\Standalone\weblogic\domains\THSStandAlone\config\config.xml not
found>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:27 PM IST> <Info> <Management> <BEA-1
41254> <Generating new domain directory in C:\WIRES\Standalone\weblogic\domains\
THSStandAlone>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Critical> <WebLogicServer
<BEA-000362> <Server failed. Reason:[WLServer THS-SA-Admin] There are 1 nested errors:
[WLServer THS-SA-Admin] weblogic.management.ManagementException: Failure during
domain creation
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.generateDomain(DomainDirectoryService.java:229)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.ensureDomainExists(DomainDirectoryService.java:152)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.start(DomainDirectoryService.java:72)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.ServerServicesManager.startS
ervice(ServerServicesManager.java:459)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.ServerServicesManager.startI
nStandbyState(ServerServicesManager.java:164)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.initializeStandby(T3S
rvr.java:711)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:4
82)
[WLServer THS-SA-Admin] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
[WLServer THS-SA-Admin] at weblogic.Server.main(Server.java:67)
[WLServer THS-SA-Admin] Caused by: com.bea.plateng.domain.script.ScriptException
: Template "null" does not exist. Line 1
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic$StateMachine.processRead(ScriptParserClassic.java:510)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic$StateMachine.execute(ScriptParserClassic.java:428)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic.parseAndRun(ScriptParserClassic.java:150)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParserCla
ssic.doExecute(ScriptParserClassic.java:112)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.script.ScriptParser.ex
ecute(ScriptParser.java:73)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.DomainInfoHelper.execu
teSilentScript(DomainInfoHelper.java:861)
[WLServer THS-SA-Admin] at com.bea.plateng.domain.DomainInfoHelper.creat
eDefaultDomain(DomainInfoHelper.java:1755)
[WLServer THS-SA-Admin] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
[WLServer THS-SA-Admin] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
[WLServer THS-SA-Admin] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
[WLServer THS-SA-Admin] at java.lang.reflect.Method.invoke(Method.java:5
97)
[WLServer THS-SA-Admin] at weblogic.management.internal.DomainDirectoryS
ervice.generateDomain(DomainDirectoryService.java:224)
[WLServer THS-SA-Admin] ... 8 more
[WLServer THS-SA-Admin] >
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Notice> <WebLogicServer>
<BEA-000365> <Server state changed to FAILED>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Error> <WebLogicServer> <
BEA-000383> <A critical service failed. The server will shut itself down>
[WLServer THS-SA-Admin] <Feb 16, 2009 1:49:28 PM IST> <Notice> <WebLogicServer>
<BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
[WLServer THS-SA-Admin] Error in server execution (THS-SA-Admin)

Thanks for your reply.
I have seen sample xml and my target looks the same
<wlserver dir="${weblogic.domain.dir}"
                         port="${weblogic.domain.admin.server.port}"
                         servername="${weblogic.domain.admin.server.name}"
                         username="${weblogic.domain.admin.user}"
                         domainname="${weblogic.domain.name}"
                         password="${weblogic.domain.admin.password}"
                         configFile="config.xml"
                         generateConfig="true"
                         action="start"
                         beahome="${env.BEA_HOME}"/>
my requirement is to use ant task.. otherwise I am able to create through configuration wizard
Thanks

Not able to login to weblogic console.

Hi,
I am trying to login to weblogic console, but it is failing with error message as follow:
*"Page not found*
The server has not found anything matching the Request-URI. "_
Previous it was fine i was able to login to the weblogic console without any issue, but suddenly this problem start apearing.
Please can somebody help me on this issue.
Thanks,
Manoj

Hi Ravi,
This is the config file sample. Please have a look to this.
<server>
<name>AdminServer</name>
<ssl>
<name>AdminServer</name>
<enabled>true</enabled>
<hostname-verification-ignored>true</hostname-verification-ignored>
<listen-port>9002</listen-port>
<login-timeout-millis>25000</login-timeout-millis>
<two-way-ssl-enabled>true</two-way-ssl-enabled>
</ssl>
<log>
<name>AdminServer</name>
<file-min-size>50000</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<memory-buffer-severity>Notice</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
</log>
<stuck-thread-max-time>2400</stuck-thread-max-time>
<stuck-thread-timer-interval>180</stuck-thread-timer-interval>
<listen-port>9001</listen-port>
<web-server>
<name>AdminServer</name>
<frontend-https-port>443</frontend-https-port>
<auth-cookie-enabled>false</auth-cookie-enabled>
</web-server>
<listen-address>-------</listen-address>
<tunneling-enabled>true</tunneling-enabled>
<staging-directory-name>/apps2/bcawl10/applications_on</staging-directory-name>
<staging-mode>nostage</staging-mode>
<health-check-timeout-seconds>120</health-check-timeout-seconds>
<graceful-shutdown-timeout>60</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>true</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>true</client-cert-proxy-enabled>
<weblogic-plugin-enabled>true</weblogic-plugin-enabled>
</server>
I am accessing the console from a different windows machine while the admin server is configure on different unix box.
http://host_IP:9001/console is the url i am using to access the console.
As this is the production environment so we do not have permission or flexibility to create the new domains.
and for your previous post i did search for the files on the DemoIdentity.jks, DemoTrust.jks and wsrpKeystore.jks.
I am able to file the files at
/apps/bea/software/bea1001/wlserver_10.0/server/lib/DemoTrust.jks
/apps/bea/software/bea1001/wlserver_10.0/server/lib/DemoTrust.jks
/bea/software/bea1001/wlserver_10.0/samples/domains/portal/wsrpKeystore.jks
and i can see from the console that all the instance point to the same path mentioned above under KeyStore setting of weblogic console.
One more point i want to add is that console is accessible for few of the users what few of them are not able to access intermittently. So if you know then please could you put some input from the network prospective whether firewall setting can play role in in this or not.
Thanks,
Manoj Kumar

Configuring weblogic domain for IAM using WLST

Hi All,
i have to configure a weblogic domain using wlst(off-line).i am able to do this by using wls.jar template but that domain does not contain all the deployable component which is required for IAM ,IDM.
I don't know how to set the configuration component which is required for IAM,IDM as asked configuration wizard aske when we use GUI mode and how to give the schema details.
please give any idea how to configure a domain(for IAM,IDM) using WLST exactly same as GUI mode .
thanks

I'm not sure what is your problem, but there is no compatibility issue between CSS and Bind normally.
The docuement you referenced only says, in the background section, that the DNS server itself needs to be configured so part of your domain is handled by the CSS.
So, your dns server handles all request for your.domain but there is one NS entry forwarding request for www.your.domain to the CSS so the CSS can answer the dns request.
The css is not able to handle all types of dns request (ie: email server ip address request) so you can configure a 'dns forwarder' on the css to forward the request to another dns server.
See the following for dns forwarder config example
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d3b52.shtml
Regards,
Gilles.
Thanks for rating.

Sessions Not Closed After 'Execute Unix/Linux SSH Script' Activity

Hello,
Wondering if anyone out there has some experience with running "Execute Unix/Linux SSH Script" activities against a "Unix/Linux System" target and able to help?
We have a process that runs an ssh script on a Unix/Linux target and in the 'Target' tab we specify to open a new session on the target we want. It was our assumption that once the script is executed successfully that the session would be closed, however, that does not appear to be the case. It seems the target receives a "disconnect" from CPO but if we run "who -a" on the host, the session still exists. We are trying to run our activity/script in a while loop with a 60 second pause in between, and after 30 loops (30 minutes) the next call fails.
What appears to be happening is, the session opens on the Linux target and every occurrence of the "Execute Unix/Linux SSH Script" activity is merely connecting and disconnecting using the same session that was originally opened. But after the 30 minute idle timeout on the Linux host, the session is closed and the next occurrence of the SSH Script activity fails with the following error:
This activity xyz did not return within the expected time period and was abandoned.
Is there a setting in the target properties or activity properties that we're missing here??
Thank you for any feedback or suggestions that may be out there!
Neil

Neil,
I will discuss with you through email to find what exactly happened in your case.
Thanks,
James

Not sure how to configure Weblogic with log4j.xml

I tried something VERY similar to this. I wasn't sure where to put this code below. I figured in a Servlet environment, it should probably go in a Listener. I found an existing class inside of Spring that does exactly that: org.springframework.web.util.Log4jConfigListener
I put my log4j configuration file into an entry in the classpath and configured web.xml as follows:

        <context-param>
            <param-name>log4jConfigLocation</param-name>
            <param-value>classpath:gov/pa/dep/formu/resources/log4j.properties</param-value>
        </context-param>
        <context-param>
            <param-name>log4jRefreshInterval</param-name>
            <param-value>30000</param-value>
        </context-param>
        
     <listener>
          <listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
     </listener>The server admin placed the actual log4j.properties file into an AppFileOverrides folder instead of under WEB-INF\classes. I don't know if this caused the problem or not. Since I also was using the DailyRollingFileAppender and running into problems LOSING my log entries each day because he file didn't get renamed, I followed Metalink BUG# 8459807, and used the datedFileAppender available at http://minaret.biz/tips/datedFileAppender.html.
When the application started, the server log showed that log4j was being configured but none of my logging statements were going into the logs. It wasn't until the server admin placed a copy of log4j.properties (a different log4j.properties with a rolling file appender) that the log statements started going into the file that was configured based on web.xml.
Surely, things can't be this difficult with log4j, and commons logging under WebLogic.
All I want is APPLICATION LEVEL LOGS that are specific to the day.
Can someone else elaborate on how they got this working?
thanks a bunch,
Eric

Hi,
The configuration wizard (config.sh) lets you create a WebLogic Domain, however and depending on others "Oracle Middleware" products installed on the same "Oracle Home" (directory where weblogic has been installed) the configuration wizard allows you create the new weblogic domain to support the others middleware products such as WebCenter.
When I say support It means that Configuration Wizard allows you to create the weblogic resources like JDBC connections, JMS services, and deploys all applications that integrates another product such as WebCenter.
I suggest create your domain with support for WebCenter and then from Admin Console create the JDBC resource to connect to other database such as JD Edwards database.
I hope this help.

Not able to execute for loop in korn shell

#!/usr/bin/ksh
#: notify_po.ksh
# Description: Script sends out the email notification to PO mail box
# History:
. /homes/applidcc/.appsprofile
. /homes/applidcc/set_forms.env
. /homes/applidcc/external.env po_recv
EMAIL=EMAIL_ADDRESS1=[email protected] EMAIL_ADDRESS2=[email protected]
$ print $EMAIL
for emails in $EMAIL;do
echo $EMAIL
done
exit 0
Above script echo value EMAIL_ADDRESS1=[email protected]
it is not looping means not able to get second value.

# EMAIL="EMAIL_ADDRESS1=[email protected] EMAIL_ADDRESS2=[email protected]"
# for emails in $EMAIL;do
echo $emails
doneEMAIL_ADDRESS1=[email protected]
EMAIL_ADDRESS2=[email protected]
#Message was edited by:
Paul M.
Next time you may want to post a similar issue on Linux forum. Thanks.

Not able to execute Configure Weblogic Domain script

Similar Messages

Maybe you are looking for