Not able to preview localhost in any devices

I can't open the localhost web page on my iPad or iPhone. Its is very important because im working in my app locallly, so i need to open it locally in my devices.
I got the message:
"An error occurred"
"Web page not available"
Follow the check list:
- I'm using a Mac osX Moutain Lion, Chrome and an iPad and iPhone.
- I start one new Yeoman web app with Grunt server running
- Wich is node server: grunt-contrib-connect - https://github.com/gruntjs/grunt-contrib-connect
- Firewall if off
- Put the files into the mac SITE folder with ALL permitions: chmod -R 777
- The URL works fine in my computer on Chrome and other browsers as well in my computer: http://localhost:9000/
- My ip address shoying in the Adobe inspect wiget is 192.168.1.2
- If i put this ip in the Edge option doent work as well, still i cant open the local address it in my devices
- If i go to my device and put my computer ip wich is 192.168.1.2 folloiwing the port:9000 its NOT open and show the message: "Safari could not open the page because it could not connect to the server"
- Yes the tool works if i put any other URL any other web site preview works nicely
- Yes i read the post: http://forums.adobe.com/message/5029389#5029389, but its is a diferent server
Please, how can i solve this? If i able to solve it i'll buy the upgrade and start the full version.
Thank you very much.
Henry

I suspect the issue is that the site is available only to your computer and not to other computers or devices.
Try this:
On your device open the native browser and input the URL to your device, using the device IP... e.g. http://192.168.1.2/mysite/index.html
Does that work for you? If your native browser can't get to the site using the computer's IP address then the Edge Inspect app on your devices won't be able to either. I'd guess that there's some setting in either Yeoman or Grunt you need to set that will open the site up to outside computers.
Let me know if you have any other questions,
Mark

Similar Messages

  • Dreamweaver CS4 not able to preview in new Firefox 6.02 on a PC. Was working great in 6.01 and previous versions. Any sugesstions?

    I use dreamweaver for the PC for the most part of web development and use multiple browsers. Firefox is my primary browser and has been working great for preview. Firefox came out with 6.02 and now I am not able to preview pages in firefox from dreamweaver. Still works in the other browsers.

    I use dreamweaver for the PC for the most part of web development and use multiple browsers. Firefox is my primary browser and has been working great for preview. Firefox came out with 6.02 and now I am not able to preview pages in firefox from dreamweaver. Still works in the other browsers.

  • HT204370 Why are movies excluded from iCloud?  They are the most expensive purchase from iTunes and just as valuable and important to be able to access anywhere from any device?

    They are the most expensive purchase from iTunes and just as valuable and important to be able to access anywhere from any device?  I find it so frustrating that first I had to purchase iWorks for my Mac, then I had to purchase it all over again for my IOS device so I could use iCloud, then I purchase thousands of dollars of movies and am not able to store them in the cloud, yet we have only purchased the rights to the songs no differently than we have the movies.  Why would they exclude movies from icloud?

    They are not part of icloud in all countries, becuase the movie industry in those copuntries does not allow Apple to offer this.

  • IP5 set up with all options...however new emails  OLD like 13-14 years old have arrived in the IN BOX that say no "this message has no content", and I am not able to delete them. Any helpful ideas?

    IP5 set up with all options...however new emails  OLD like 13-14 years old have arrived in the IN BOX that say no "this message has no content", and I am not able to delete them. Any helpful ideas?

    Hi 23672!
    I have an article here that can definitely help you with that issue. The article is about what to do when a mail message has no content, and can be found here:
    iOS 4: Unable to view message body preview or mail receives blank messages
    http://support.apple.com/kb/ts3426
    Note that the article was written for iOS 4, but it will work in later iOS versions. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • In Windows 7 using Adobe Reader XI (11.0.07) was able to copy an item (name, number, date) and paste in another document.  In Windows 8.1 using same version of Adobe Reader XI (11.0.07) not able to do this.  Any solutions?

    In Windows 7 using Adobe Reader XI (11.0.07) was able to copy an item (name, number, date) and paste in another document.  In Windows 8.1 using same version of Adobe Reader XI (11.0.07) not able to do this.  Any solutions?

    With computer running Windows 7 using the curser can select an item, then right click and select copy.   With computer running Windows 8 there is a hand instead of a curser therefore unable to select an item, therefore unable to copy.  Is there a way to have a curser rather than the hand?
    Eureka!!!   Just found by right clicking on the hand can then select “Select Tool” and then copy.  Hurray!!!

  • My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

    My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
    Both devices have the Icloud on.

    Try this on All Devices...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

  • Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
    (97189)

  • When I log in to update a page it says that's someone else is already logged in (but they are not) so I'm not able to update the page - any suggestions?

    When I log in to update a page it says that's someone else is already logged in (but they are not) so I'm not able to update the page - any suggestions?

    I take it you are not the administrator for the site? If so, you would be given the option to unlock the page (it will be near the top of the screen in a yellow box).
    Do you have access to the site outside of Contribute. If you can't unlock it via the administrative function mentioned above, you need to go into the site using Windows Explorer (if it's a local development site) or an FTP client and find a file with the same name as the page but with a .lck extension and delete it. That will unlock the page.

  • My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?

    My screen on my iPhone has gone completely blank. I can hear it ringing but am not able to answer it. Any advice?

    try a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • Problem with wlan sticks module, not able to write to disk any more

    Hello everybody,
    when I booted my PC today, a strange and some sort of severe problem occurred concerning my wlan stick(s) that I think, I'm not able to solve without your help. I searched for a solution but it didn't seem that somebody else has had a similar problem before.
    Here is the description:
    I have two wlan sticks (but I do not use both of them nor are they both plugged in at the same time), and both happen to malfunction since today. My "main" stick (used most of the time) is a BigTec Wireless 11N Adapter with a Realtek chipset. My second one (only used to solve problems with the other stick) is a Fritz! WLAN USB Stick (to be used with ndiswrapper).
    After bootup, which makes no problems at all, my "main" wlan stick is not able to connect to the network. When I run wicd-curses (I use wicd as network manager), the virtual terminal freezes (when I use urxvt under openbox to run wicd-curses, only the window freezes). After one minute, a message appears that says something about a dbus problem but I am not able to read it because of the screen clears. Then I'm able to use the terminal again, but (and this is the very, very strange about this) when I run any program that tries to write on my disk it stucks, so I can't cancel it with ctrl-c nor can I kill the process. Wicd-curses, ifconfig or iwconfig also crash after entering the command and show the same behavior. At this point, my wlan stick does not show any sign of being plugged in (normally it blinks...).
    My second stick makes the computer crash: After a few moments a stacktrace is shown (like when a kernel panic occurs), saying something about "stack being overrun". But I can't find the message in the log files so it is difficult to post it.
    When I tried to figure out a solution, I saw in pacman.log, that yesterday udev and hwdetect were updated... But also downgrading all the packages that were updated yesterday did not solve the problem!
    I'll post now the last lines of a few logs here (but nothing concerning the ndiswrapper stick, else it would be too disturbing), I hope they help you at helping me!
    everything.log
    Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
    Jan 23 15:25:27 localhost kernel: [ 21.415035] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
    Jan 23 15:25:27 localhost kernel: [ 22.063785] r8712u: 1 RCR=0x153f00e
    Jan 23 15:25:27 localhost kernel: [ 22.064534] r8712u: 2 RCR=0x553f00e
    Jan 23 15:25:27 localhost kernel: [ 22.170765] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
    Jan 23 15:25:28 localhost kernel: [ 22.410354] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
    Jan 23 15:25:28 localhost kernel: [ 22.463386] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
    Jan 23 15:25:28 localhost kernel: [ 22.463902] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
    Jan 23 15:25:28 localhost kernel: [ 22.735037] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
    Jan 23 15:25:29 localhost kernel: [ 23.383789] r8712u: 1 RCR=0x153f00e
    Jan 23 15:25:29 localhost kernel: [ 23.384535] r8712u: 2 RCR=0x553f00e
    Jan 23 15:25:29 localhost kernel: [ 23.490763] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running
    Jan 23 15:26:12 localhost kernel: [ 66.495307] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" # then I hard reset because of the freeze
    errors.log
    Jan 23 15:00:01 localhost /USR/SBIN/CROND[5597]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
    Jan 23 15:20:01 localhost /USR/SBIN/CROND[6215]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
    Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
    Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
    Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
    Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
    daemon.log
    Jan 23 15:25:15 localhost [ 0.864888] udevd[48]: starting version 175
    Jan 23 15:25:15 localhost [ 4.116488] udevd[235]: starting version 178
    Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
    Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
    Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
    Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
    I hope you can help me and thank you for trying
    hoeffl
    P.S.: Excuse all the mistakes I made because of being new here, please!

    This seems to be a problem with r8712u on all 3.2.x and 3.3-rc kernels on all distros.  I've had it for weeks on Gentoo, Arch, and several other distros.
    If you are running a 3.2.x kernel, this is almost definitely the problem.  All 3.1 kernels don't do this.
    I posted a temporary work-around on the Arch bugzilla, and Larry Finger (kernel dev with wireless) is currently working on it (a patch).   
    In the meantime, If you compile your own kernels, you can get 3.2.x's to work normally- see my comment here for more details.   https://bugs.archlinux.org/task/27996
    Top of page doesn't say r8712u, but it's the same problem, and after the first 2-3 comments it deals with r8712u specifically.
    There is also info on the Gentoo forum 3.2 kernel quirks thread, towards the bottom of Page 1:  http://forums.gentoo.org/viewtopic-t-901702.html
    Last edited by wrc1944 (2012-02-03 07:45:32)

  • Not able to open files through any Application in Mavericks

    HI, Since upgrading to Mavericks, I am not able to open the files/folders through any applications (Photoshop, Open office) or attach any files in Mail or web sites, as these files/folders appear greyed out. I could access those files either by locating them in the Finder and right click 'Open with' or drag and drop those files on to the Application icon on the dock. I could not even attach screen shots for this query. Thanks for your help.

    This occurred only to my login. Apple Support advised me to delete the Finder preference list (
    ~/Library/Preferences/com.apple.finder.plist)  and restart. Since then, it is working fine.

  • Query regarding OdiInvokeWebService, not able to use it with any webservice

    I am trying to invoke a webservice using the OdiInvokeWebservice, but not able to do that, tried with 11.1.1.6 and 11.1.1.5
    any one tried that before in the following version ?
    Please help !!
    Regards,
    Uday

    What did Orange say when you requested them to unlock the iPhone?
    You have to request an unlock - it is not automatic after a period of time.

  • I am not able to open my icloud my device is stolen and i need to look up in find my iphone

    I am not able to open my icloud. My device is stolen and i need to look up in find my iphone
    whenever i enter my ID and password it says "icloud encountered an error while trying to connect to the server". How can i access my icloud ?

    if you mean when you go to this url
    https://www.icloud.com/
    then I would try using a different internet browser and maybe another computer

  • SIM user is not able to login with hand held device

    SIM user of particular store is not able to login with handhel device but able to login with terminal.
    Please tell me whether it is configuration issue or data issue.

    You can check whether password is expired or not. Is it same login details used for SIM GUI? If so, are you able to login to GUI.

Maybe you are looking for

  • Need to download Illustrator CS5.1 to reinstall

    We bought Illustrator CS5.1 from adobe years ago and have a valid SN. Now replacing the workstation it is installed on. The USB stick used to backup the install files gets to the point of "installation progress" and please insert the disk to continue

  • Why doesn't my Canon MP560 work anymore after upgrading to 10.9.4?

    I can no longer print using my Canon MP560 after upgrading to 10.9.4. Is there any fix?

  • Calculating Mulitple Fields

    I have a form with 5 columns across. 1 column on Left side is called Quantity. 2 Columns (next to each other) on the Right side. One mark "Prices" & One Marked "Amount". I want to be able to place in my Quantities. Email to my Vendor. Have my Vendor

  • How to connect to a network dell laser printer 3010cn?

    I have the drivers on the original CD but the Mac does not launch it and just give the option in the submenu to eject or get info...not usefull really! If anyone have a solution they are more than welcome to provide them. For info , the printer is sh

  • Asm weird errors

    we have 2 SUN FIRE 6900 with cluster ware 10.1.0.4..2 asm and database the node 1 runs forms reports services for solaris 10 the node 2 runs application server node 1 and node 2 are running different databases node 1 spdb and node 2 turbodb recently