Not able to send file Using FTP in SSIS 2005
I am using SSIS 2005
I am trying to send file to ftp server using FTP task in SSIS but i am getting following error.
Error Message-:An error occurred in the requested FTP operation.
Detailed Description-:550 /FileName.txt: Access is denied.
RemotefilePath is /
I need a advice.
Thanks in advance.
I got this error recently from the FTP task in SSIS:
Unable to send files using "FTP".
I had everything correct, by the book. I was trying to send a file, but I got the same error when trying to receive a file.
I already verified that I could send the file via command line FTP, so the FTP was not "secure FTP" (which wouldda required FileZilla or WinSCP or something similar) and my credentials were fine.
But I still got the above error. Heck, I was beginning to thing that the FTP task in SQL Server 2008 was broken and just couldn't send files.
Well, this issue is now resolved. The problem was in the
destination folder. I was assuming that the root folder for my FTP account held the files.
So I entered the destination folder as this:
/data_in/
But... the FTP task sees the root folder as one up from that.
So I had to use my account name in the path... meaning I had to change the destination folder to this:
/myaccountname/data_in/
(where "myaccountname" was my login to the FTP site.)
I hope this post helps someone else.
Donna
Similar Messages
-
Sender File Adapter not able to get file via FTP from an external system
Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael -
Not Able to send messages using NOKIA TEXT MESSAGE...
Hi,
I am not able to send messages using text message editor. I am having N70. I also have the latest PC suite and latest phone software. Whenever I try to send message, a message appears "Unable to send". It does not even give me the reason. I have connected my phone using data cable and I can transfer music, syncronize and do other stuffs.
Can someone suggest what needs to be done to send messages using PC??
Thanks in advance.
Raghu.Hello,
i am having the same Problem.
I cannot send any sms via my phone (N70) nor via the latest Pc Suite. It also just says "Unable to send" with no reason.
I am on:
V5.0705.3.0.1
30-01-07
PM-84
Model: N70-1
Code: 0530495
Any help is much appreciated. :-)
Kind regards,
Thorsten
Message Edited by deeplook on 01-Jul-2008 08:59 PM -
Windows 8.1 Pro - FTP.exe not able to put file to FTP Server
Hi
We have replaced our Windows XP environment to Windows 8.1 Pro. Now I have problem with sending files through FTP to very old devices. Devices are runninng FTP Servers. Each time I try to "PUT" file on Windows 8.1 I receive message after some time:
"Connection closed by remote host"
If I make the same on Windows XP file is stored on FTP successfully.
From Windows 8.1 I am able to upload software only via Filezilla, but I need command line solution like FTP.exe or ncFTP.exe (non of them are able to stor file)
I have observed in Wireshark, that ftp.exe sends about 80kB of data, waits for some time and then it stops.
Summary of my problem:
Source Appl
Destination
Status
Win XP ftp.exe
FTP Server upload ok
Win 8.1 ftp.exe
FTP Server upload failed
Win 8.1 ncFTP.exe
FTP Server upload failed
Win 8.1 filezilla
FTP Server upload ok (but no command line solution)
Win 8.1 environment:
- standard installation of Windows 8.1 with newest Microsoft patches
- firewall ports - opened for inbound and outbound traffic
- no antivirus
FTP Server on problematic devices:
- old FTP Server, transfer in passive mode
I need command line solution tu upload files. Now I am not able to upload 1500 devices as we don't have Windows XP anymore.
What I have observed, when I type "PUT file" it takes about 20-30 seconds to start transfer on Windows XP or through filezilla.
Is there any problem with timeout in Windows 8.1 when it transfer files to old FTP server (working in passive mode)?
Thanks and regards,
MarcinHi Marcin,
Here is a thread talking about Windows 8.1 and FTP, see:
Windows 8.1 and FTP problems
https://social.technet.microsoft.com/Forums/windows/en-US/db3793a6-2810-464c-af9a-522b05f51ba9/windows-81-and-ftp-problems?forum=w8itprogeneral
Further, I am currently checking on the issue, if more things found out, I will update here.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support -
Not able to send files to my Mac via bluetooth.
Hey i have mac os x 10.5, i am not able to sen files to my mac from my blackberry 8520. I have paired my bb and mac but when i try to send files from my bb it says "Failed to find service".
Please help.
Thanks.Hi
go to system preference
and go to sharing
enable blue tooth sharing
Hope it helps
LH -
Hi Friends,
I have developed a abap program that download a excel file to a application server.
i need to send the file to a shared folder or share point using FTP.
How can i send the file which is in Application server thru FTP?
Can anybody guide me on this?
Thanks in Advance
SuganyaHi,
U need to use the stsndard FTP function modules to achieve it..
The following FM are useful --
FTP_CONNECT
FTP_COPY
Thanks,
Arun -
Not able to checkout Files using Java Code and SAP BAPI from DMSServer
Hi
Able to download / checkout the files using T-Code SE37 (BAPI_DOCUMENT_CHECKOUTVIEW2).
But when same RFC is executed from Java, it alsways says -
Message ::::::::Document LGL/10000000003/000/00 does not exist
My inputs in Java Code is as below -
import java.io.*;
import java.util.*;
import com.sap.mw.jco.*;
//CREATED ON - 10-APRIL-2010.
public class BapiDocCheckOutview {
public static void main(String args[]){
try{
if(mConnection!=null){
JCO.Repository repository=new JCO.Repository("AraSoft",mConnection);
JCO.setMiddlewareProperty("jco.middleware.allow_start_of_programs", "SAPFTPA");
JCO.Function function=repository.getFunctionTemplate("BAPI_DOCUMENT_CHECKOUTVIEW2").getFunction();
//End of get function.
System.out.println("Before execution1");
if(function !=null){
JCO.Field DOCUMENTTYPE = function.getImportParameterList().getField("DOCUMENTTYPE");
DOCUMENTTYPE.setValue("LGL");
JCO.Field DOCUMENTNUMBER = function.getImportParameterList().getField("DOCUMENTNUMBER");
DOCUMENTNUMBER.setValue("10000000003");
JCO.Field DOCUMENTPART = function.getImportParameterList().getField("DOCUMENTPART");
DOCUMENTPART.setValue("000");
JCO.Field DOCUMENTVERSION = function.getImportParameterList().getField("DOCUMENTVERSION");
DOCUMENTVERSION.setValue("00");
JCO.Field GETSTRUCTURE = function.getImportParameterList().getField("GETSTRUCTURE");
GETSTRUCTURE.setValue("1");
JCO.Field GETCOMPONENTS = function.getImportParameterList().getField("GETCOMPONENTS");
GETCOMPONENTS.setValue("X");
JCO.Field ORIGINALPATH = function.getImportParameterList().getField("ORIGINALPATH");
ORIGINALPATH.setValue("C:
TEMP
DMS_");
JCO.Field GETHEADER = function.getImportParameterList().getField("GETHEADER");
GETHEADER.setValue("X");
JCO.Field PF_FTP_DEST=function.getImportParameterList().getField("PF_FTP_DEST");
PF_FTP_DEST.setValue("SAPFTPA");
//JCO.Field PF_HTTP_DEST=function.getImportParameterList().getField("PF_HTTP_DEST");
//PF_HTTP_DEST.setValue("SAPHTTPA");
System.out.println("Here Setting Values Inside Structure ::DOCUMENTFILE");
JCO.Structure DOCUMENTFILE=function.getImportParameterList().getStructure("DOCUMENTFILE");
DOCUMENTFILE.setValue("1","ORIGINALTYPE");
DOCUMENTFILE.setValue("WWI","WSAPPLICATION");
DOCUMENTFILE.setValue("ZHCL_CS","STORAGECATEGORY");
DOCUMENTFILE.setValue("E0DF7893E2BD5DF19C07001517B4A299","APPLICATION_ID");
DOCUMENTFILE.setValue("E0DF7893E2BD5FF19C07001517B4A299","FILE_ID");
DOCUMENTFILE.setValue("X","CHECKEDIN");
DOCUMENTFILE.setValue("X","ACTIVE_VERSION");
//DOCUMENTFILE.setValue("LGL","DOCUMENTTYPE");
//DOCUMENTFILE.setValue("10000000003","DOCUMENTNUMBER");
//DOCUMENTFILE.setValue("000","DOCUMENTPART");
//DOCUMENTFILE.setValue("00","DOCUMENTVERSION");
//JCO.Field GETCOMPONENTS = function.getImportParameterList().getField("GETCOMPONENTS");
//GETCOMPONENTS.setValue("X");
//JCO.Field GETHEADER = function.getImportParameterList().getField("GETHEADER");
//GETHEADER.setValue("X");
mConnection.execute(function);
If anyone have an Idea on what I have missed out...
Please do advice me.
Thanks
PrashantHi
To update in the initial requirement, I have added (prefixed, zeroes) in Document No., doing that, now the application is able to find the document, but not able to transfer the same from DMS Server to my local Machine, always giving the following error -
Type ::::::::E
Message ::::::::File d:\dms\z_IPI_PRASHANT01.doc cannot be created
Please let me know, if some services needed to checked in SAP System or some more information to be provided in RFC.
Thanks
Prashant
Dear Experts
Any advice on this. Still not able to download the documents from DMS Server.
I have also added few more code in my Java program -
private int use_sapgui;
public void setSapGui(int use_sapgui){
use_sapgui = 2;
PLease help !!
Regards
Edited by: Prashantroy on Sep 26, 2011 12:49 PM
Hi,
Further to my earlier Mail, while checking the Trace suing SM59 in ECC System I got the following Error -
Trace file opened at 20111010 142232 India Standard Time, SAP-REL 701,0,134
======> cannot open SAPGUI
ABAP Programm: SAPLSYSE (Transaction: )
User: IPI_PRASHANT (Client: 220)
Destination: SAPFTP (handle: 3, , )
SERVER> RFC Server Session (handle: 1, 43220900, {5D1DF3E0-ACBD-F11F-8EA0-00A0D1
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: java)
SERVER> Called function module: RFC_START_PROGRAM
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1742
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =sapftp erpdev sapgw00 43232164 IDX=4
Can someone help me in getting this sorted out.
Thanks N Regards
Edited by: Prashantroy on Oct 10, 2011 2:32 PM -
Not able to send messages using Mail
the message comes up is that "the connection to your outgoing mail server on port 25 timed out". I have followed the instructions of deleting the account and creating it again - that did not solve the problem. The outgoing server that's being used is "smtp.mac.com"
Just wondering if anybody knows what the issue could be.
Your help will be greatly appreciatedJSCAPE is know for Telnet, FTP, rlogin, etc. Java components. They also have other usefull components for applications that needs to access accross the network. They have provided me the solution and the same follows. I thought if anybody has similar problems they can have the solution.
http://www.jscape.com
I in the process of devloping a Java based Web Mail system as a frontend for MS Exchange Servers. If anybody is intersted in the code please let me know. [email protected]
Dear Nanda,
Thank you for your email. It is possible that your regular email client is configured to delete the messages from the POP3 inbox after they have been retrieved. Try the following.
1. Send an email message to your mail address.
2. Close your email client before your email client retrieves the message.
3. Using the iNet Factory classes attempt to login to the POP3 mailbox and retrieve your mail. Depending on how long it takes to send the mail through your SMTP server this may take a few tries before you get a message back.
Alternatively you can disable the automatic deletion of email messages in your email client. If you are using MS Outlook you can do this from the main menu as follows:
Tools | Accounts | Select Account | Properties | Advanced
Check the box "Leave a copy of messages on server".
This will leave the message on the server X days after you download the email from your Outlook client.
Hope this helps. Please let me know if I can be of further assistance.
Best Regards,
Van Glass
JSCAPE -
Not able to send mail using Scenario.
Hi All,
I am getting below line in debug log.
/atg/scenario/IndividualEmailSender
Unable to send email to recipient: Customer:150002. Email status is set to invalid
DEBUG SMTP: connected to host "pro.turbo-smtp.com", port: 25
EHLO Jitendra-HP
250-turbo-smtp.com
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-PIPELINING
250-8BITMIME
250 SIZE 20000000
DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN"
DEBUG SMTP: Found extension "AUTH=LOGIN", arg "PLAIN"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "SIZE", arg "20000000"
DEBUG SMTP: Attempt to authenticate
AUTH LOGIN
334 VXNlcm5hbWU6
aml0ZW5kcmEudmlzaG5vaUB0ZWNobWFoaW5kcmEuY29t
334 UGFzc3dvcmQ6
aml0ZW5kcmE=
235 ok, go ahead (#2.0.0)
NOOP
250 ok
NOOP
250 ok
NOOP
250 ok
QUIT
221 turbo-smtp.com
Below is the configuration for properties file.
# /atg/scenario/IndividualEmailSender
#Wed Jan 22 01:28:09 IST 2014
contextPathPrefix=^/Constants.null
loggingDebug=true
# /atg/userprofiling/email/TemplateEmailSender
#Wed Jan 22 00:42:17 IST 2014
loggingDebug=true
contextPathPrefix^=/Constants.null
# /atg/dynamo/service/SMTPEmail
#Thu Jan 23 00:29:25 IST 2014
defaultFrom=[email protected]
defaultSubject=o lala laa
emailHandlerHostName=pro.turbo-smtp.com
emailHandlerPort=25
loggingDebug=true
password=Pass@123
username=[email protected]
Any one please help.
Thanks in advance.from the Personalization Programming Guide
"Each time TemplateEmailSender sends an e-mail message, it generates an event of class atg.userprofiling.email.TemplateEmailEvent, which indicates whether or not the message was successfully sent. For example, suppose you create a mailing with 10 recipients, and 1 message does not get sent because the recipient has an invalid e-mail address. TemplateEmailSender generates 10 template e-mail events, 9 indicating success and 1 indicating failure.
When a message fails, TemplateEmailSender looks at the e-mail address of the failed message, finds all profiles that use that address, and marks those profiles as being ineligible for receiving e-mail by setting the emailStatus property to invalid."
So check the emailStatus attribute of the profile Customer:150002, if it is false set it to true.. -
HTTP : 404 Not found - Not able to download file using custom table
Hi ,
I have created the custom procedure to download the file as follows :-
create or replace PROCEDURE "DOWNLOAD_MY_FILE" (p_file in number) as
v_mime varchar2(255);
v_length number;
v_file_name varchar2(2000);
Lob_loc BLOB;
BEGIN
select mime_type, blob_content, file_name,dbms_lob.getlength(blob_content)
into v_mime,lob_loc,v_file_name,v_length
from consultant_feedback_header
where file_id = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
-- htp.p('Content-Disposition: attachment; filename="' || v_file_name || '"');
owa_util.http_header_close;
wpg_docload.download_file( Lob_loc );
end download_my_file;
I have followed the following steps :-
1) Log in into SQL COMMAND as SYS
2) alter session current_schema=FLOWS_XXXXXX;
3) compile the procedure with my pl/sql procedure :
CREATE OR REPLACE FUNCTION
wwv_flow_epg_include_mod_local(
PROCEDURE_NAME IN VARCHAR2)
RETURN BOOLEAN
IS
BEGIN
IF UPPER(procedure_name) IN (
' DOWNLOAD_MY_FILE') THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END wwv_flow_epg_include_mod_local;
I don´t know what am I do wrong?
Regards
NaveenCheck whether you are using a path on the Application Server.
OPEN DATASET cannot process files on presentation server. I guess, the path you are using is present on your PC or some other server that is not the SAP application server. -
I am not able to send email using JAVA API to outer email
If I am trying to send email from my company account to yahoo I am getting following errors:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay
for [email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailSend.main(MailSend.java:116)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to rel
ay for [email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 4 more
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.7.1 Unable to relay for mkba
[email protected]
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailSend.main(MailSend.java:116)
Please let me know the reason for the same.Unable to relay - This happened because your Company network don't permit relay. Do talk to the network administrator and check with way safe you can send.
I got the same problem, now im using through gmail. -
Using wildcards (*) in sender file adapter - FTP type
Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
OlianThanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian -
i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.
With one mailbox server in the production site and one in the DR site, you do not have high availability. If the main site goes down, the cluster loses quorum and all databases dismount. You must then force quorum or move the file share
witness to restore quorum.
I can't tell you why what you observed happened. At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
To send mail outside, you must allow relay. To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay. There are plenty
of articles on the Internet that describe how to configure a relay connector.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Is there a way to send a message with a photo attached using imessages. I am not able to send a photo to one of my contacts because I am sending the contact a message text messages. I don't want to send contacts text messages. I want to send them iMessages.
Kolyei, sorry for the late reply.
Have your brother create a contact in his phone for himself. Inside his own contact, have him add his phone number and his iCloud address.
Settings > Messages > Send & Receive Have your brother select both his phone number and email addresses where he would like to receive iMessages. -
i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!
I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~
Maybe you are looking for
-
Error:[Microsoft][ODBC Micrsoft Access Driver] Not a valid password
Can anyone help me with this problem: I have a Microsoft Access database with database password assign to it. the following JAVA statement works for some users but not others: connection.openConnection(databaseurl,"",""); all users are using same jav
-
Problem in uninstalling obiee 11g
Hi, I am trying to uninstall obiee 11g on a windows server. When i click on the deinstall button, the command prompt pops up and disappears. The uninstall screen never comes up ! Any clues ? Thanks, Vineeth
-
Can't run very simple DOM parsing source on my machine - please help :(
Hi Guys, I am trying to run the following very simple program on my machine to parse a very simple XML file. It just returns Document object NULL. Same code is working fine on another machine. Note: there is no silly mistake. i have valid xml file at
-
Effects: Freezing v. sends
I've tried using creating a bus for Full Reverb and a bus for Tube Compression and using sends from audio tracks to the busses. It still has to process mixing changes (volume and pan, etc.) BTW, I have 2 vocal tracks going to a vocal bus w/ sends t
-
Powershell - Invoke-Command Network Connection has been interrupted
Hi, I have been having this problem intermittently, i use invoke-command -AsJob -computername myserver1 -scriptblock {get-process} WARNING: The network connection to myserver1 has been interrupted. Attempting to reconnect for up to 4 minutes... WARNI