Not-approved issue is visible in AppStore

I have just published a new issue of a magazine in the Folio Producer - status is off course public for Apple to see it. At the same time I have submitted for approval at Apple, where it is waiting for review with the status Not Cleared for Sale.
Therefore - it should not be visible in the AppStore. But it is.....!
Any opinion whether this is an Adobe or Apple issue...?

Hmmmmm..... got a bit confused. Normally I publish paid issues, but this is free - so that's why. But why do the status at Apple then say "Waiting for approval" if they don't have to approve..?

Similar Messages

  • How do I take my credit card off itunes store, I am being charged for stuff that was not approved by me!!

    I have charges on my account that were not approved by me, need to cancel my credit card on here and don't know how!!

    Yes.  Also go to http://www.apple.com/support/itunes and send an email regarding Billing Issues or Account Security to request a refund.

  • Charged $487.44 for equipment charges I did not approve VZW Edge

    I am quite fed up with this company. Initially I had wanted to pay off the edge on one of my lines to upgrade to a new device, which at the time was only $108.29 and then I could upgrade to a new phone. Instead of charging me the 108.29 to upgrade, they charged me for a full buyout for $435.56 on 9/19/14. Since then I have gotten that money back, and I had thought everything would have been fixed, but I was wrong.
    Since then, for another number on my line, verizon has claimed I want to buy out that phone, and now instead of my bill being the usual around $232 it should be, the bill is $720.20 for a buyout I NEVER APPROVED. I found this out on friday and called verizon and they told me there was nothing they could do until Monday, and that they took our number down and would call us on monday and sort it out. We tried calling the number back that they gave us and there is no answer, and we still have yet to get a call and my bill hasn't been adjusted. I have about had it with this company and want almost nothing to do with verizon anymore. Is there any one at all who can help or give me advice on how to move forward from this? Because I am NOT paying this bill at the price they are telling me it is. I did NOT approve a full edge buyout, and even if I did, they did it on the wrong line. I need this fixed asap. So any help would be nice. Thank you.

    Welcome to the user to User Technical Support Forum provided by Apple.
    For your issue... Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Issue with Visibility Settings for Backgrounds and Layers

    I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
    When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
    Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
    I was wondering if anyone else has run into this and has a solution, or has any recommendations.
    Thanks in advance.

    Hi setrev2012,
    How are you adding the backgroud?
    The only way I can think to accomplish this is via a watermark.
    The basics...
    Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
    Select a jpg or PDF of your background and adjust scaling options as desired.
    Then click the Appearance Options.. and uncheck the Show When Printing option.
    In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
    If you want a solid color background, just create a flat image of the background color for use as the watermark.
    If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
    Regards,
    Rave

  • Not distributued and Not included issues.

    We have a couple of issues with Not distributed and Not included issues. First, since they are commingled with our variances they do not get passed through to PA so we are off between GL and PA. Second, the not distributed are not part of inventory since they  remain in the variance account.
    Anyone have experience with these and any solutions for these issues?
    SAP says we can turn off the price delimiter but we are uncertain as to the effect overall.
    Anyway to isolate these to a different GL account posting?

    <b>Solution</b>
         **<b>'Not distributed'</b> price differences can be due to three reasons:
         <b>A)</b> System applied a 'Price limiter' logic (stock coverage check).
         You can analyse this case using the value flow monitor transaction:
             - for release 4.7 , transaction CKMVFM
             - for release  4.6C,  program SAPRCKM_VERIFY_PRICE_DET (note 324754 is required).
             - for release  < 4.6C: Program ZVERIFY_PRICE_DET  included in the note 324754 Or  directly checking the field CKMLPP-PBPOPO manually.
         In this case, the value field CKMLPP-PBPOPO > cumulative inventory.
         If you still want these price differences to be distributed , you can switch off price limiter logic. Then all price differences are posted to stock, and the price difference account is cleared. You should  decide
         for each material if you want to switch off price limiter logic or not.
         So you can achieve a compromise between realistic prices and clearing
         the balance of the price different account.
         Price limiter logic can be switched off in the following way:
    Resetting the price limiter quantity:
              In release 4.7 this is done uising transaction CKMVFM.
              In release <= 46C using the    ZREMOVE_PRICE_LIMITER (see note 325406).
    Note 855387:
              Application of this note will create an additional selection parameter for step 'Single Level Price Determination' to switch on/off price limiter logic.
              This option is the better way, as it is faster provides more flexibility (see the note for more information).
         <b>B)</b> System applied a fallback strategy during price determination
         (see note 579216) to avoid a negative periodic unit price (PUP).
         Please check the attached  note 579216:
         If the regularly calculated PUP (based on  'Cumulative Inventory' line) would become negative, the system uses a different strategy to calculate the PUP:
         The PUP is calculated with these priorities:
         1.'Cumulative Inventory' line (no fallback)
         2.Receipts ('ZU') line  (Info message C+ 135 in the log)
         3.Beginning inventory ('AB') line  (Info message C+ 135 in the log)
         4.PUP-price of previous period (Info message C+ 136 in the log)
         5.S-price (->(Info message C+ 137 in the log)
         The fallback strategy is active by default for Single-Level price determination.
         For multilevel price determination it must be activated with parameter 'Negative price: automatic error management'.
         As a solution, you might check the postings of these materials if they really need to have such big negative price differences or if there is some kind of error in the posting or the production structure
         If you find such errors, you might reverse the corresponding postings and report them in a correct way.
         Or, you might use transaction MR22 (debit/credit material) in order to post a small positive amount of differences to the concerned materials
         so that the resulting actual price would no longer be negative. Then you could perform the period closing (which you had to reverse before).
         In the next period, you might remove this manual posted value from the materials (again with MR22) in order to correct the overall stock values back to their original amounts.
         <b>C)</b> Due to a source code error with transaction CKMM.
         The above situation may be produced because transaction CKMM was executed during the corresponding period.
         When transaction CKMM is processed the system deletes the price differences for the material in the period and these differences are not longer in the period record tables.
         See note 384553 for further details.
         The fact is that the price differences are still visible in CKM3 (as not distributed). This is due to the missing reset of summarization records (MLCD).
         This error is just a problem of CKM3 display, because the differences shown as 'not distributed' do not exist in the periodic records. The PUP of the material is calculated correctly.
         This error is corrected by note 838989 for the future.

  • Customer Standard Order was delivered with credit status not approved and blocked.

    The Customer Standard Order was delivered with the credit status not approved and blocked.
    3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%,
    We have checked the settings in OVAK and the assignment is correctly set as D and 01. This is an issue with a high risk customer with static check in OVA8 transaction.
    Please advice.
    BR
    Anuja

    The Customer Standard Order was delivered with the credit status not approved and blocked.
    If the sales order is blocked system can not allow you to create delivery with out approving it.
    3 orders were delivered without credit limit and now the credit limit is exceed in more than 250%
    There could be reason that in FD32 for the payer customer the risk category might not have been assigned during those 3 sales orders creation. Also one more reason in OVA8 against the Static credit check if open order field is not ticked.
    Please let me understand what is your exact issue currently?
    thanks,
    Srinu.

  • Error : Output could not be issued

    Dear Expert,
    I am not able to take print out of one of my invoice. While looking for print preview i am getting error message as below :
    Output could not be issued
    Message no. VF 304
    Diagnosis
    An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
    I did some changes in smartform but all is activated and other invoices are showing proper output except one.
    can you please tell me possible causes to trace this error.
    Thanks.

    Hello,
    Please check the OSS : Note 451568 - Document printing:Message VF304 - Output could not be issued for more informtaion.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=451568
    The OSS will be helpful.
    BR,
    Tushar

  • Output can not be issued.

    I want to see output of outbound delivery when I clicked print preview, i get message Output can not be issued.
    What is issue, if any body know plz do reply. Thnx in adv.

    Hi
    Check with your functinal Consultant he can help out , u need to Click on MESSAGEs and then choose a communication Method and Medium etc etc and SAVE , this ur Functional Consultant can help out and then u can see the OUTPUT when u click on PRINT PREVIEW.
    surya

  • Output can not be issued in SapScript..

    I want to see output of outbound delivery of Packing List when I clicked print preview, i got message Output can not be issued.
    In output there is showing red incorrectly processed No handling units exit.
    For that delivery no handling units exit. I want to print delivery with out handling units.
    Plz ket me know any suggestion.

    Hi
    Check with your functinal Consultant he can help out , u need to Click on MESSAGEs and then choose a communication Method and Medium etc etc and SAVE , this ur Functional Consultant can help out and then u can see the OUTPUT when u click on PRINT PREVIEW.
    surya

  • My iTunes library is missing since upgrade Lion 7.2.  I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

    Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
    I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

    hi Limnos,
    I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th.  (90% of the media is missing, along with all playlists)  The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29.  (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
    I have my iTunes folder backed up on both an external drive as well as Time Machine.
    I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up. 
    Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
    Thank you for your help!
    Deb

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • How can I get apple to warranty my iPod touch 4th gen? It has always had issues and seems to be a lost cause. Will not connect to wi-fi. It also has cracked screen, but that is not the issue.

    It has a cracked screen also but that is not the issue. I am willing to live with the screen

    Unfortunately, ANY signs of 'neglect or damage' automatically become the cause of any issues you're having. As in it doesn't matter if your screen was flickering before it was dropped, when they see the dent or cracked screen, that screen flicker was caused by the drop. Because they  have no way to know if you are telling the truth (it's nothing personal, they just literally dont' know) so any signs of damage become the reason for your issue. The only way out of that is if you had taken in your iPad and, even if you didn't get it replaced, an apple employee can have documented that yes, that issue existed before the drop.
    It's not fun, I know, but that's just how it is. Any signs of 'neglect or damage' and that 'neglect or damage' is the cause of your issues.

  • How to create a view for all Service Requests that are not approved by reviewer

    Hallo,
    I want to create a view in the Service Requests library that shows all SRs that are not approved. How to configure condition that says: if a SR has related Review Activity which is In Progress, show that SRs?
    I couldn't find this when creating the view. Thank you.

    So here's the first problem with that: Which review activity? a SR can contain multiple RAs, so how do we decide if an arbitrary SR is approved or not? 
    As to the specific language you use (Any child RA is In Progress) you might want to look at the criteria from the default Change approval view, which does something similar: 
    <QueryCriteria Adapter="omsdk://Adapters/Criteria" xmlns="http://tempuri.org/Criteria.xsd">
    <Criteria>
    <FreeformCriteria>
    <Freeform>
    <Criteria xmlns="http://Microsoft.EnterpriseManagement.Core.Criteria/">
    <Expression>
    <And>
    <Expression>
    <SimpleExpression>
    <ValueExpressionLeft>
    <Property>$Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity' TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity']/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$</Property>
    </ValueExpressionLeft>
    <Operator>Equal</Operator>
    <ValueExpressionRight>
    <Value>$MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$</Value>
    </ValueExpressionRight>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpressionLeft>
    <Property>$Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$</Property>
    </ValueExpressionLeft>
    <Operator>Equal</Operator>
    <ValueExpressionRight>
    <Value>$MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$</Value>
    </ValueExpressionRight>
    </SimpleExpression>
    </Expression>
    </And>
    </Expression>
    </Criteria>
    </Freeform>
    </FreeformCriteria>
    </Criteria>
    </QueryCriteria>
    This is a simple AND criteria with two componets. one looking for a Review Activity (TypeConstraint='CoreActivity!System.WorkItem.Activity.ReviewActivity') which is related to the targetting CR by Contains Activity ($Context/Path[Relationship='CoreActivity!System.WorkItemContainsActivity';
    Context in this... context means the CR targeted by the view) where it's status (/Property[Type='CoreActivity!System.WorkItem.Activity']/Status$) is In Progress ($MPElement[Name="CoreActivity!ActivityStatusEnum.Active"]$). The other is filtering
    for the target change request's status ( $Context/Property[Type='CoreChange!System.WorkItem.ChangeRequest']/Status$) is In Progress ($MPElement[Name="CoreChange!ChangeStatusEnum.InProgress"]$). 
    You could convert the second criteria to point to SRs and SR status values, and then use the similar text for the first criteria. i'd recommend
    Anton's Advanced View Editor (or
    the free version) to do the criteria adjustment. 

  • Hot mail is not working after firefox upgrade. I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week .

    I am using Firefox 12.0. I did not have issue with hotmail, but I am facing problem this week after firefox upgrade. After entering login the page freeze. I am not able to continue.
    I reviewed the thread. I am not using Foxit.
    I reviewed hot mail forum. They suggest firefox upgrade causes this issue.
    I tried after clearing my browser's cache and cookies. The situation remain same. Any idea?
    What is the workaround?

    Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

  • USB Device Not Recognized issues

    I have a Qosmio X505-Q860 and I've been getting the 'USB Device Not Recognized' error constantly for several months. I've never plugged anything into any of my USBs and the error is now causing a nice Blue Screen (which happened about 4 times yesterday within 1 hour). I've tried uninstalling the problem USB hub but it keeps telling me that it failed to uninstall (I'm on my administrator account when doing this). How in the world do I get rid of this so my computer stops crashing and driving me crazy!?
    Edit: I should also mention that everything is up to date (I check often and checked just now).
    "A stopped clock is still right twice a day."

    I suggest trying another USB cable. If you are positive that your cable is not the issue then try resetting the iPod and booting into disk mode (Hold menu+select down until Apple logo appears. Then hold menu+play/pause down and the iPod will go into disk mode, see if the computer recognizes it then. If that works then their is either a software issue on the computer or a firmware issue. Worth trying to restore but backup all your iPod's files first!

Maybe you are looking for