Not getting the EDIT INFOCUBE screen

Hi All,
Im new to biw. I m referring to the Step by Step guide for BIW book. There are lots of difference in the screens since i use ECC 6.0. I have created an InfoArea, Info Object Catalog and Info Objects. now when i create the InfoCube, after creation it does not go to the EDIT InfoCube Screen. I could not move any further in the document.
Please help me out.
Regards
RS

Hi,
This is means that u have not added any key figures and characteristiccs to that cube and u have not assigned any chanractersitic to that dimension... Go to the characteristic tab and drag the characteristics and KF's and assign the char to the Dimension and activate the Cube....
Assign points if it helps
Khaja

Similar Messages

Trying to install VM Server and not getting the CD found screen to display

Trying to install Oracle VM Server from a CDROM:
1.     Insert the Oracle VM Server CDROM into your CDROM drive.
2.     Boot the computer with the Oracle VM Server CDROM.
3.     The Oracle VM Server screen is displayed.
All that went fine but not getting the CD found screen to display. Instead it says the device wasn't found and shows a list of drivers, none of which seem to match the CD drive. Anyone have any ideas? There is an option to point it to a driver disk, not sure if I need to get the driver from somewhere and do that or not?
machine is Dell Optiplex 760
CD RW\DVD RW drive

Try changing the SATA mode in the BIOS to AHCI.

When I double-click the home button on my iPhone 3g, I do not get the recent apps screen. How come and how can I fix it?

When I double-click the home button on my iPhone 3G-8GB, I do not get the recent apps screen. How come and how can I fix it?

Ok..Thank u for the information.. And one more question,
Is it possible to use two itunes in a same system??(bcz i had an iphone 4 with itunes in my laptop and also wish to back up this 3G with that same system)

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

I can not access the editing panel, why?

I've brought in my various files and am ready to start dragging and dropping my video and audio viles into the editing area. I can not get the editing area to open up.. It says timeline no sequence. I can not figure out how to get
to where it shows me video and audio tracks. I have reset current workspace and openned and closed project.
HELP!!

yup ---- RTFM ;-))))
Here is the icon

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

My new 7th gen NANO cannot be connected on either my Windows 7 or VISTA PCs. I have updated to ensure I have the latest iTunes version. When connecting I did not get the setup screens but the NANO assumed the identity of an older IPod. I have reset

I am having problems setting up a new 7th gen IPod NAN or both my Windows 7 and Windows Vista PCs. When first connecting I did not get the setup screens and cannot sync existing media. The NANO assumed the name of a previously installed IPod touch and resetting does not clear this name. I have tried uninstalling and reinstalling iTunes.updating driver software and resetting the NANO without any success

Purchased as new at Best Buy. As far as I know it was noever formatted prior to my purchase

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

I have uninstalled iTunes from an XP laptop and I now get the iTunesHelper Error2 screen (Apple Application Support was not found).

Hi All,
I have uninstalled iTunes from an IBM ThinkPad X40 running XP and I now get the iTunesHelper Error2 screen (Apple Application Support was not found). I do not want to re-install iTunes as I am now a mac user. However I want to get rid of the message from the XP machine as it is irritating and I want to use it standalone for something else.
Any ideas?
Cheers,
Southcote

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes. You can skip the reinstallation.
tt2

When I try to Bookmark a new page, I do not get the "Page Bookmarked or Edit This Bookmark" window. I t does place the site into my bookmarks but I have to go to "organize" bookmarks in order to put it where it belongs.

When I try to Bookmark a new page, I do not get the "Page Bookmarked or Edit This Bookmark" window. I t does place the site into my bookmarks but I have to go to "organize" bookmarks in order to put it where it belongs.

How are you saving a new bookmark?
There 5 ways to save a new Bookmark in Firefox, the first 4 should offer to save the new bookmark in a folder:
1.
2. Right-click and select Bookmark this Page.
3. Bookmarks > Bookmark this Page
4. Double-click the Star that is on the right side of the Location bar.
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder, without opening the Edit this Bookmark dialog.)
5. Drag the website image in the URL bar into the Sidebar view of Bookmarks
or to the Bookmarks menu bar item and then into the drop-down or onto the Bookmarks Toolbar

When I open iTunes and am also connected to my iPad, I do not get the screen where my device should be listed.

When I open my iTunes and am also connected to my iPad, I do not get the screen where I can select a device or choose the Summary tab. What am I doing wrong?

Hello Hegsted60,
Sorry to hear that your iPad is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

When i open the organizer for elements 12 on my mac...i can not get to top of screen....help

when i open the organizer for elements 12 on my mac...i can not get to top of screen....help

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

HT1535 I do not get the "add to"' button on the right of the screen to add items to my iphone. Help?

I do not get the "add to" button on the right side of the screen to add items to my iphone. Help?

Please see your other post for an answer. Thank you.
Opening PDFs on iPad

Not getting the EDIT INFOCUBE screen

Similar Messages

Maybe you are looking for