Not populating data in Discoverer base table eul5_objs
Hi,
I am discoverer administrator. I am running the report where I found out that there is no data in column eul5_objs.obj_ba_id which is resulting in no results. Kindly suggest what changes needs to be done which will help to populate data in column eul5_objs.obj_ba_id.
Hi,
Try following
step 1. Insert routing header (bom_op_routings_interface) : Run Interface
step 2. Insert routing lines (bom_op_sequences_interface) with correct reference to routing_sequence_id: Run Interface
step 3. Insert all resource lines (bom_op_resources_interface) with correct reference to operation_sequence_id, routing_sequence_id , Run Interface.
Thanks,
Hrishi
Similar Messages
-
Restricted key figure not populating data
Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.' -
Categories tab in app store is not populating data
Dears,
I have a problem in my Iphone OS 3.1.3 as the Categories tab in app store is not populating data and coming blank.
it was working fine before and suddenly stopped, although I restore to original setting 2 times and still not working.
Appreciate your help.Hi, it seems like this but let's wait reply from apple in order to know when will it work again
-
BOM and Routing import is not populating data in base table.
BOM AND ROUTING INTERFACE Import Prog is not populating base table with interface data.Even the Interface table data is not processed.I am passing process flag as 1 and transaction_type as INSERT,still the ROUTING INTERFACE TABLES are not getting processed.
passing the below details.
INSERT INTO bom.bom_op_routings_interface
(organization_code, assembly_item_id, completion_subinventory, routing_sequence_id, organization_id,
routing_type, common_routing_sequence_id, last_update_date, last_updated_by, creation_date,
created_by, last_update_login, alternate_routing_designator, assembly_item_number, process_flag,
transaction_type) ;
INSERT INTO bom.bom_op_sequences_interface
(operation_seq_num, department_id, department_code, option_dependent_flag, operation_lead_time_percent,
implementation_date, effectivity_date, disable_date, count_point_type, backflush_flag, minimum_transfer_quantity,
operation_sequence_id, routing_sequence_id, organization_code, assembly_item_number, last_update_date,
last_updated_by, creation_date, created_by, include_in_rollup, alternate_routing_designator, process_flag,
transaction_type);
INSERT INTO bom.bom_op_resources_interface
(resource_seq_num, resource_code, resource_id, basis_type, usage_rate_or_amount, usage_rate_or_amount_inverse,
assigned_units, schedule_flag, resource_offset_percent, activity, standard_rate_flag, autocharge_type, organization_code, assembly_item_number,
operation_seq_num, effectivity_date, last_update_date, last_updated_by, creation_date, created_by, alternate_routing_designator,
operation_sequence_id, routing_sequence_id, process_flag, transaction_type);
Where am I making a mistake.
Thanks in Advance.
Sambit PradhanHi,
Try following
step 1. Insert routing header (bom_op_routings_interface) : Run Interface
step 2. Insert routing lines (bom_op_sequences_interface) with correct reference to routing_sequence_id: Run Interface
step 3. Insert all resource lines (bom_op_resources_interface) with correct reference to operation_sequence_id, routing_sequence_id , Run Interface.
Thanks,
Hrishi -
Not getting data into 3rd int table
Hi all,
here i ve data in 2 internal tables. this data i want store into 3rd internal table, here am adding with inner join but am not getting data into 3rd one.
plz check my logic.
REPORT ZEXCHANGE_RETES .
TABLES : tcurr, " Exchange Rates
/msg/rabr. " Account (Posting Headers)
DATA : l_date type datum.
TYPES : begin of t_tcurr,
kurst like tcurr-kurst, " Exchange Rate type
fcurr like tcurr-fcurr, " From Currrency
gdatu like tcurr-gdatu, " Date as of which
end of t_tcurr.
TYPES : begin of t_rabr,
OW_WHGNR like /msg/rabr-OW_WHGNR,
bil_dat like /msg/rabr-bil_dat,
abrnr like /msg/rabr-abrnr,
end of t_rabr.
TYPES : begin of t_output,
kurst like tcurr-kurst,
fcurr like tcurr-fcurr,
gdatu like tcurr-gdatu,
OW_WHGNR like /msg/rabr-OW_WHGNR,
bil_dat like /msg/rabr-bil_dat,
abrnr like /msg/rabr-abrnr,
end of t_output.
DATA : it_output TYPE STANDARD TABLE OF t_output WITH HEADER LINE,
wa_output TYPE t_output.
DATA : it_rabr TYPE STANDARD TABLE OF t_rabr WITH HEADER LINE,
wa_rabr TYPE t_rabr.
DATA : it_tcurr TYPE STANDARD TABLE OF t_tcurr WITH HEADER LINE,
wa_tcurr TYPE t_tcurr.
getting data into 1st itab
SELECT kurst fcurr gdatu
from tcurr into table it_tcurr
where kurst EQ 'M'.
SORT it_tcurr by fcurr GDATU DESCENDING.
delete adjacent duplicates from it_tcurr comparing fcurr.
getting data into 2nd itab
SELECT * FROM /msg/rabr into CORRESPONDING FIELDS OF TABLE it_rabr.
SORT it_rabr BY OW_WHGNR bil_dat abrnr.
getting data into 3rd itab
SELECT t~kurst
t~fcurr
t~gdatu
r~OW_WHGNR
r~bil_dat
r~abrnr
FROM tcurr as t INNER JOIN
/msg/rabr as r on tfcurr EQ rOW_WHGNR into table it_output
WHERE rabrnr BETWEEN '00000000000000800251' AND '00000000000000800300' AND rbil_dat < wa_tcurr-gdatu.
printing output
LOOP at it_output into wa_output.
WRITE: /10 wa_output-kurst,
15 wa_output-fcurr,
25 wa_output-gdatu,
50 wa_output-OW_WHGNR,
60 wa_output-bil_dat,
80 wa_output-abrnr.
ENDLOOP.
here am not getting data into 3rd i tab.
Thanks & Regards,
sudharsan.Hi,
The select command is the most fundamental function of writing ABAP programs allowing the retrieval of data from SAP database tables.
Try filling the 3rd internal table with Loop ... Endloop.
Loop at t_tcurr.
Read table t_rabr with key field1 = t_tcurr-field1.
If sy-subrc = 0.
Move t_tcurr-field1 = itab_final-field1.
Move t_tcurr-field2 = itab_final-field2.
Move t_rabr -field3 = itab_final-field3.
Move t_rabr -field4 = itab_final-field4.
Append itab_final.
Endloop.
Hope this helps you.
Regards,
Ruthra -
Updated Date not populated for Vendor in R3 Tables
Hi
I made few changes for Vendor in R3 but it didn't update UPDAT field in LFA1 Table whereas i could see other data fields changed that i did in the screen.
Could you pls. tell me why is it Or Is there any configuration required for updating Update field in R3 Tables....
Thanks...Hi Harpal,
There are two ways you can check it,
1) Directly do the changes in vendor master transaction and before saving switch on debugging (/h) through command bar and simply debug the code and you can check where the data is getting updated.
2) Once you do all the changes in vendor master through transaction, start another session and put transaction ST05, switch on the trace, after that go to earlier transaction and save. In the ST05 screen simply switch off the tract and display trace.
In the shown trace check the update command on LFA1 table from there you can analyze which are all the fields it is writing to table.
Regards,
Durgesh. -
Could not insert Data in to the table
hello friends
I have some pbm in inserting values in to sqlserver database table.I could not insert values to the
table having varchar datatype fields.partyType is a field name of varchar type.when i try to insert
"LCL" for that field it throws following exception.
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]The name 'LCL'
is not permitted in this context. Only constants, expressions, or variables allowed here. Column
names are not permitted.
sometime it throws
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Optional feature not
implemented
If i give only numeric values to those fields it accepts.ie table accepts only integer values for all the fields.I use prepared statement for inserting data.I am inserting data to 4 tables at a time.I use ODBC driver.can u tell me where would be the problem??</p>
with regards
deviHmmmm...
ssniazi does nothing but ask for contact information or recommend Oracle products.
Based on this I consider it likely that this person is some sort of sales representative either directly or indirectly associated with Oracle.
I personally wouldn't provide any contact information to this person. Nor would I accept any advice until this person starts to actually provide some solutions or at least correctly reveals any financial interests that they might have.
In addition I believe ssniazi is in violation of the conduct code of this website because ssniazi is requesting information which will be used by a business entity without telling the users that it will be used in that way. And I expect that Oracle itself would frown on such activities.
2.3 You agree that You will not use the Website to:...(g) collect or store personal data about other users unless specifically authorized by such users. -
Populating data from model to table
This is the code i have written for populating.
Please verify this code.
Let me know if anything more to be done.
code of main:-
public class main {
Collection plist = new ArrayList();
Connection conn = null;
Statement st;
public void get_details()
try
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
conn = DriverManager.getConnection( "jdbc:microsoft:sqlserver://10.10.30.25:1433;databaseName=TrackingSystem","sa","sa" ) ;
st = conn.createStatement();
String str = "select * from Project Table";
ResultSet rs = st.executeQuery(str);
String a = rs.getString(1);
String b = rs.getString(2);
String c = rs.getString(3);
while(rs.next())
pdetails rec = new pdetails();
rec.setEname(a);
rec.setRname(b);
rec.setDid(c);
plist.add(rec);
catch(Exception e)
public Collection getPlist() {
return plist;
public void setPlist(Collection collection) {
plist = collection;
code of pdetails
public class pdetails {
private String Ename;
private String Rname;
private String Did;
public pdetails()
Ename = new String();
Rname = new String();
Did = new String();
public pdetails(String Ename,String Rname,String Did)
this.Ename = Ename;
this.Rname = Rname;
this.Did = Did;
public String getDid() {
return Did;
public String getEname() {
return Ename;
public String getRname() {
return Rname;
public void setDid(String string) {
Did = string;
public void setEname(String string) {
Ename = string;
public void setRname(String string) {
Rname = string;
I have created a jar file for this classes And imported as a model in my web Dynpro Application.
And mapped it to component controller.
And from there to view controller.
I had a view with a table .
I created the table by using template of table.
And Binded it to the context of the view.
And the code i have written in the WDDOINIT() method is:-
IWDMessageManager msg = wdComponentAPI.getMessageManager();
try
Collection c;
c= new ArrayList();
main m = new main();
m.get_details();
c = m.getPlist();
for(int i = 0; i<c.size();i++)
pdetails pd = new pdetails();
String a = pd.getDid();
String b = pd.getEname();
String f = pd.getRname(); IPrivateProjectDetails.IPdetailsElement proj = wdContext.nodePdetails().createPdetailsElement(pd);
proj.setDid(a);
proj.setEname(b);
proj.setRname(f);
wdContext.nodePdetails().addElement(proj);
catch (Exception e) {
// TODO: handle exception
msg.reportWarning("Exception Caught");Hi,
Can you put
msg.reportSucces(´bla´);
somewhere inside this loop:
for(int i = 0; i<c.size();i++)
to verify that you actually get data from the backend?
Please let us know if you actually see the messages in your screen.
Good luck, Roelof -
ALV List not populating data statistics output in ECC6.0
Hi,
I am working in an upgrade upgrade project from 4.6c to ECC6.0.
4.6c is non-unicode system. ECC6 is Unicode system.
I am facing one problem in ALV list output in the background job. In 4.6c the data statistics output is displayed as per the screen
Data statistics
Number of
Records passed
584
but this output is not displayed in ECC 6.0.
I given below the code which we are using in programe 4.6c and ECC6.0
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZNHNZLLVL0'
i_grid_title = l_title
is_layout = alv_layout
it_fieldcat = alv_fieldcat
i_save = 'A'
is_variant = stru_disvar
TABLES
t_outtab = list_table
EXCEPTIONS
program_error = 1
OTHERS = 2.
Give your input to solve this issue .
- Anandakumar.KHi Ganesh,
this problem is mainly printer problem issue, to resovle this isues you have to do small changes in the print setting.
Step1) Execute the report in background -> you will get a popup .....where you will give the output device for ex : LOCL
fruther in the same popup you can see Properties .......click that you can see COVERSHEETs > select coversheets and
then click SPECIFICATIONS buttons > select int he Fied name A) ALVSELECTIONS B) ALVSTATISTICS one bye bone
and then change the Field Default value to YES.... for both the options . Now finally click COPY Settings ...........
now you again shedule the report again in background ........you can see the result you are expecting.......
Cheers
Divya. -
Planning Manager is not Loading data into Forecast Interface table
Hi
I have created a forecast set with name 'ABCD-IA' and I am inserting a row into the mrp_ofrefcast_interface table.The rows are not processed by the Planing Manager and it is pendign with the status of 2.The planning manager is up and running.
Here is my insert statement.
insert into mrp.mrp_forecast_interface
(inventory_item_id,forecast_designator,organization_id,forecast_date,quantity,process_status,transaction_id,source_code,workday_control,last_update_date,last_updated_by,creation_date,created_by,confidence_percentage,bucket_type ,attribute1)
values (51046,'ABCD-IA',84,sysdate,100,2,null,to_char(sysdate,'RRMMDD'),3,sysdate,-1,sysdate,-1,100,1,'INSS');
Thanks in advance.
LinaI would suggest you to go through this link on how to write pl/sql block.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/toc.htm
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/sqloperations.htm#sthref1273
For your question it could be re-written as follows :
create or replace package body asg_change
is
procedure p1...
is
begin
insert into org_change
sl_no, status, org_name, effective_start_date, person_id, assignment_number
SELECT xxkdd_asg_seq.nextval, 'NP' status, hr_general.decode_organization (paaf.organization_id) organization_name, paaf.effective_start_date, paaf.person_id, paaf.assignment_number
FROM per_all_assignments_f paaf
WHERE EXISTS
SELECT 1 FROM per_all_assignments_f paafi
WHERE NVL (paafi.organization_id, 0) != NVL (paaf.organization_id, 0)
AND (paaf.effective_start_date- 1) BETWEEN paafi.effective_start_date AND paafi.effective_end_date
AND paafi.assignment_id = paaf.assignment_id
end p1
end asg_change;Also check this post.
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:47458244605081
Main snippets from the above post
Tom-- I subscribe to your SQL mantra for data (and truly, is there anything else? :))
which is:
1. Do it in a single SQL statement if at all possible.
2. If you cannot, then do it in PL/SQL (as little PL/SQL as possible!).
3. If you cannot do it in PL/SQL, try a Java Stored Procedure
(extremely rarely necessary with Oracle9i and above.)
4. If you cannot do it in Java, do it in a C external procedure.
(when raw speed, or 3rd party API written in C is needed.)
5. If you cannot do it in a C external routine, you might want to seriously think
about why it is you need to do it...Hope this helps.
Regards
Raj -
Flash 10.1.53.64 on OS 10.6.4 not populating data
I am using Flash 10.1.53.64 on Mac OS 10.6.4 in the latest versions of Firefox, Safari and Chrome. Any Flash-based web page will not populate any data. For example, Adobe's own store woulld not let me purchase the latest version of Llightroom 3 becuase half the data was not on the page. mlb.com's Gameday app will not populate the player's stats or any live score information, but it does show the animation of each pitch. Oddly, when I created a test user login on the same computer and tried it, it works fine. But on my normal login account, it does not work. How can I troubleshoot this? Obviously there is an "extension" conflict with something in that particular login.
My apologies. I was directed to this forum directly by the Adobe support website, so I assumed that it was the official
Adobe-sanctioned support forum monitored by Adobe employees. I guess Adobe has no online tech support beyond the unhelpful FAQ pages.
I am not going to ever pay $39 for technical support for a supposedly free product. Adobe makes more than enough money from all the CS products I have to buy every year that they can afford to provide REAL, direct and free technical support. -
Master/Details Relationship using View Links is not not population data
Hi,
I have problem in generating proper data in master/detail relationship using view links passing three parameters between two custom tables can guide me the steps and process how i will able to generate and acheive this requirement.
very urgent
Please suggest meWithout further details, I'd suggest reviewing the following Section of the Fusion Developers Guide:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_masterdetail.htm#ADFFD758
I've done this many times without issue. -
Popup datagrid not populating data from xml
hey guys,
im having trouble creating a datagrid within a popup. i
created the datagrid on a normal panel and everything worked fine.
then i tried to recreate it within a popup and now im having
trouble getting the xml data onto the datagrid. i think the problem
is that the xml is not a variable within the function but ive tried
multiple methods and i have not gotten it to work.
whenever it runs it just says TypeError: Error #1009: Cannot
access a property or method of a null object reference. yet when i
remove the dg.dataProvider = list.michigan.venue; line the datagrid
works but there is no data obviously... how do i define the xml
dataprovider within the function??? also, i need the name of the
state to be dynamic... how could i make it so that the datagrid
uses the selected state within the xml file? i imagine i would be
passing a variable through the function that would be called when i
select the path within the xml. THX GUYS!
<venuelist>
<michigan>
<venue>
<name>Location Name</name>
<address>This is the address</address>
<city>Detroit</city>
<state>MI</state>
<zip>48209</zip>
<phone>(313)555-5555</phone>
</venue>
</michigan>
<illinois>
<venue>
<name>Location Name</name>
<address>This is the address</address>
<city>Detroit</city>
<state>MI</state>
<zip>48209</zip>
<phone>(313)555-5555</phone>
</venue>
</illinois>
</venuelist>
here is the code im using to get the xml file...
<mx:XML id="list"/>
<mx:HTTPService id="getXML" url="VenueList/list.xml"
resultFormat="e4x" result="list = XML(event.result);"/>
here is the code for the popup
<mx:Script>
<![CDATA[
import mx.controls.dataGridClasses.DataGridColumn;
import mx.collections.ArrayCollection;
import mx.containers.Panel;
import mx.controls.Button;
import mx.controls.DataGrid;
import mx.controls.dataGridClasses.DataGridColumn
import mx.managers.PopUpManager;
private var panel:Panel;
private function init():void {
var dg:DataGrid = new DataGrid();
var dgc:Array = dg.columns;
var d1:DataGridColumn = new DataGridColumn;
var d2:DataGridColumn = new DataGridColumn;
var d3:DataGridColumn = new DataGridColumn;
var d4:DataGridColumn = new DataGridColumn;
var d5:DataGridColumn = new DataGridColumn;
var d6:DataGridColumn = new DataGridColumn;
dg.width = 638
dg.height = 163
dg.dataProvider = list.michigan.venue;
d1.width = 150;
d1.headerText = "Venue Name";
d1.dataField = "list.michigan.venue.name";
d2.width = 150;
d2.headerText = "Address";
d2.dataField = "address";
d3.width = 100;
d3.headerText = "City";
d3.dataField = "city";
d4.width = 50;
d4.headerText = "State";
d4.dataField = "state";
d5.width = 50;
d5.headerText = "Zip";
d5.dataField = "zip";
d6.width = 100;
d6.headerText = "Phone";
d6.dataField = "phone";
dgc.push(d1);
dgc.push(d2);
dgc.push(d3);
dgc.push(d4);
dgc.push(d5);
dgc.push(d6);
dg.columns = dgc;
panel = new Panel();
panel.title = "Here are our venues:";
panel.width = 658;
panel.height = 203;
panel.addChild(dg);
private function closePopUp(evt:MouseEvent):void {
PopUpManager.removePopUp(panel);
private function createPopUp():void {
PopUpManager.addPopUp(panel, this, true);
PopUpManager.centerPopUp(panel);hey guys,
im having trouble creating a datagrid within a popup. i
created the datagrid on a normal panel and everything worked fine.
then i tried to recreate it within a popup and now im having
trouble getting the xml data onto the datagrid. i think the problem
is that the xml is not a variable within the function but ive tried
multiple methods and i have not gotten it to work.
whenever it runs it just says TypeError: Error #1009: Cannot
access a property or method of a null object reference. yet when i
remove the dg.dataProvider = list.michigan.venue; line the datagrid
works but there is no data obviously... how do i define the xml
dataprovider within the function??? also, i need the name of the
state to be dynamic... how could i make it so that the datagrid
uses the selected state within the xml file? i imagine i would be
passing a variable through the function that would be called when i
select the path within the xml. THX GUYS!
<venuelist>
<michigan>
<venue>
<name>Location Name</name>
<address>This is the address</address>
<city>Detroit</city>
<state>MI</state>
<zip>48209</zip>
<phone>(313)555-5555</phone>
</venue>
</michigan>
<illinois>
<venue>
<name>Location Name</name>
<address>This is the address</address>
<city>Detroit</city>
<state>MI</state>
<zip>48209</zip>
<phone>(313)555-5555</phone>
</venue>
</illinois>
</venuelist>
here is the code im using to get the xml file...
<mx:XML id="list"/>
<mx:HTTPService id="getXML" url="VenueList/list.xml"
resultFormat="e4x" result="list = XML(event.result);"/>
here is the code for the popup
<mx:Script>
<![CDATA[
import mx.controls.dataGridClasses.DataGridColumn;
import mx.collections.ArrayCollection;
import mx.containers.Panel;
import mx.controls.Button;
import mx.controls.DataGrid;
import mx.controls.dataGridClasses.DataGridColumn
import mx.managers.PopUpManager;
private var panel:Panel;
private function init():void {
var dg:DataGrid = new DataGrid();
var dgc:Array = dg.columns;
var d1:DataGridColumn = new DataGridColumn;
var d2:DataGridColumn = new DataGridColumn;
var d3:DataGridColumn = new DataGridColumn;
var d4:DataGridColumn = new DataGridColumn;
var d5:DataGridColumn = new DataGridColumn;
var d6:DataGridColumn = new DataGridColumn;
dg.width = 638
dg.height = 163
dg.dataProvider = list.michigan.venue;
d1.width = 150;
d1.headerText = "Venue Name";
d1.dataField = "list.michigan.venue.name";
d2.width = 150;
d2.headerText = "Address";
d2.dataField = "address";
d3.width = 100;
d3.headerText = "City";
d3.dataField = "city";
d4.width = 50;
d4.headerText = "State";
d4.dataField = "state";
d5.width = 50;
d5.headerText = "Zip";
d5.dataField = "zip";
d6.width = 100;
d6.headerText = "Phone";
d6.dataField = "phone";
dgc.push(d1);
dgc.push(d2);
dgc.push(d3);
dgc.push(d4);
dgc.push(d5);
dgc.push(d6);
dg.columns = dgc;
panel = new Panel();
panel.title = "Here are our venues:";
panel.width = 658;
panel.height = 203;
panel.addChild(dg);
private function closePopUp(evt:MouseEvent):void {
PopUpManager.removePopUp(panel);
private function createPopUp():void {
PopUpManager.addPopUp(panel, this, true);
PopUpManager.centerPopUp(panel); -
How can i extract the particular data from Base tables
Hi
I have some Base R/3- Tables . I need to exact the data from these base tables.
But i need to select some type of datarecords(eg: select Material Documents from MSEG and MKPF tables based on movement types 261,262).
Something like that . So how can i select the particular category datarecords from base tables. Anyway im going to create the Custom DataSource.
So please let me know . how can i extarct tha particular data from base tables
kumarHi Venkat
See i have some 5-tables . I need to extarct from these tables.
first i need to extract the data from one table fully.
Then i need to extarct the data from second table based on profict centers, company codes of first table.
Then i need to extract the data from third table based on profict centers of first table and movement type = 2p,2n,2s condition.
So how can i extarct like this data from multiple tables.
Please let me know
kumar -
hi experts,
i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
header cube screen shot before loading to multiprovider.
item cube screen shot before loading to multiprovider.
regards
jaswanthiHow are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.
Maybe you are looking for
-
Can you have multiple apple i.ds on one computer?
Can i share and transfer music with my brother on the same computer if we have our own apple accounts?
-
LV-SignalExpress2011 - Cannot save to .LVM - Option is disabled in the Step Setup
Hello, for some reason I cannot choose the option to save as .LVM in my SAVE TO ASCII/LVM step. The input signal is a DBL Data output from a LabView 2011 Plugin. The data plots fine on the Data Graph... I can only save as ASCII.TXT. I want to save
-
Lock_lint for LINUX RHEL5
As a Software QA, I am interested in the field of Static Analysis for multithreaded software. In particular early detection of dead locks or data inconsistency. I have been made aweare of the "Lock_Lint - Static Data Race and Deadlock Detection Tool
-
I know this is possible, but how do you do it? I'm making a game, and I want a score on the screen at all times. How do I tell the game to take an int value of the score, and make it possible to turn it into a string, in order to represent it on th
-
Hi - I'm thinking of buying CS4 and if I like it and find I need the extended version at a later date, is there an upgrade path? Price in UK? Thanks