Not printing 'anwers' for calculations / formulas where no input values were given

i have successfully created a document with formulas. when i print the document, i want 'answers' of calculations where no values were put in, NOT TO PRINT (currently all 'answers' with no values put in print as '0'. this makes the document look untidy.) can anybody please help me with this?

hi george
thanks for the reply. hope that i understood correctly, and that i was supposed to past your formule (as is) into the custom valaidate script box. if not, my formula is: box 1 + box 2 = box 3, where i do not want the value in box 3 to print if i have not added values for boxes 1 and 2.
i am very new to adobe, and really appreciate your help, and thanks for the patience.

Similar Messages

How do i get the notes off my iphone 3gs that disappeared when i synced. The notes that appeared on my iphone where the same as were on my PC and they were 6months old. All the notes from January to June that i made on the iphone went somewhere?

On 25th JUNE I synched my ipone 3 gs to my PC with Outlook in Windows 7.
All the voice memos that I had recorded using the iphone app where backed up and appeared on my itunes voice memos BUT all the NOTES written on my iphone NOTEs app where not synched to notes in Outlook on my PC…in fact…. all the notes that I had entered into my iphone were GONE and the notes that appeared on the iphone where the same that were on my PC back in 27th Jan 2012…..so all the notes that I had entered into the iphone from January to June were gone…..NOT happy Jan!!
I need to find the NOTES that were entered into the iphone app that are somewhere in my iphone..
The Voice memos can across OK so why didn’t the NOTES…..and NO I did Not have icloud turned on as I have always used itunes as the back up…that is why I bought the iphone.

Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

Dunning notice not printed, forms for MAHNR '0003' RBUKM '1000 do not exist

Hi,
I have scheduled a 'DUNN' run 'F150' transaction for customer (say) '1390' and company code '1000'.
I have also assigned the appropriate forms in the SPRO (customizing) settings.
When I click on 'Individual dunn notice' and execute, I get the following message.
Dunning notice for account: 'D ' '0000001390 ' was not printed.
Forms for MAHNR: '0003 ', RBUKM: '1000 ', KOART: 'D ' do not exist (T047E)
Although the respective entries do exist in 'T047E'.
What would be the reason? What do I need to do?
Best regards,
Harsh Dave

Hi Harsh,
So first time it was run means the settings are configured properly but once again check it in correspondence tab in Customer master .There give the Dunning area beside the dunning process at dunning area button in dunning data .
Check it is there any Dunning Block
Did you given the forums like F150_DUNN_01 at dunning text button in T.code FBMP.There we have to give the Dunning forums in what you mention dunning levels.
1                F150_DUNN_01
2                F150_DUNN_01
3                F150_DUNN_02
4                F150_DUNN_02
Try it once again and update me..
Regards
Surya

Output not printing correctly for BI Publisher report.

Hi All,
We have a BI Publisher report which is printing correctly on one printer but not on another printer. The top and right side of the output are getting truncated. Printer type for both the printer is same that is "--PASTA Universal Printer Type" and both are using the same printer driver 'PASTA_PDF' and same style 'PDF Publisher'.
Please let me know how can I debug the issue.
Thanks
Vishalaksha

Steve- I understand what you are mentioning about the ftp, the XML file looks okay on both server and the client except for the letter 'ü ' and the rest of the German characters prints okay. THe problem is that the BI reprot is printing the same wrong characters.
--Ravi

Iam not getting output for inner join where condition

the condition i have give
TYPES:BEGIN OF TY_TAB,
      WERKS TYPE WERKS_D,
      LGORT TYPE LGORT_D,
      LGOBE TYPE LGOBE,
      NAME1 TYPE NAME1,
      END OF TY_TAB.
DATA WA_TAB TYPE TY_TAB.
DATA IT_TAB TYPE TABLE OF TY_TAB.
SELECT T001L~WERKS
        T001L~LGORT
        T001L~LGOBE
        T001W~NAME1
        INTO TABLE IT_TAB FROM T001L INNER JOIN T001W ON T001LWERKS = T001WWERKS
       WHERE T001L~WERKS = 'amjt' and
           T001L~WERKS = 'bimi' and
           T001L~WERKS = 'biml'.
LOOP AT IT_TAB INTO WA_TAB.
WRITE: / WA_TAB-WERKS,WA_TAB-LGORT,WA_TAB-LGOBE,WA_TAB-NAME1.
ENDLOOP.
iam not getting output for this

Well, re-read carefully your code
WHERE T001L~WERKS = 'amjt' and
T001L~WERKS = 'bimi' and
T001L~WERKS = 'biml'
- WERKS cannot be simultaneously equal to three different values, replace AND with OR ([Boolean algebra|http://en.wikipedia.org/wiki/Boolean_algebra])
- WERKS domain does not allow lowercase, so use uppercase ([Creating Domains|http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21edf2446011d189700000e8322d00/frameset.htm])
Regards,
Raymond

FBZ5 print form for payment document , where is configuration for form ?

Hello everyone.
in transaction code FBZ5 print form for payment document.
which transaction code that used for configuration form for print in FBZ5.
plese help.

Hi,
Forms developed by ABAPer, discuss with Technical people.
as a functional we can use form for check printing based on our comp requirement.
FBZP (Payment method per comp code) we are assign form, that same form we are using for FBZ5 also.
Creation Form T.Code: SE71
Regards
Viswa

Catch Elements Where no Input Value Added

Hello
Before I begin can I just say I'm new to Oracle HRMS so if I say/state something stupid please bear with me!
I have a non-recurring earnings element that has two input values, one to hold the pay value that is created via Fast Formula (very simply multiplies the Number of Units by a Unit Rate held as Global Variable) and a second that allows user to enter a number of Units, this value is passed into my formula. This part is all fine and works. Where I’m getting into trouble/can’t figure out is around the area of input validation.
I’ve then created a second fast formula to validate input and then made a reference to the fast formula through the elements Input Values screen and returned result as error. Most of my validation in here is fine however I’m trying to figure out how do I figure out if the user hasn’t placed or has removed a value from element after its been attached?
Let’s say I’ve attached my element to my assignment. I then go in and add 3 units. At this stage everything is fine and I save record. Then let’s say I go back in a remove the units entered and saved my record. Is there anyway I can get a message which says a null value has been entered? Is this something I do through a fast formula? I tried using isnull function but this doesn’t work. I’ve also tried defaulting my value in the fast formula and using was defaulted but again it doesn’t seem to work.
Thanks for bearing with me! Any pointers/help would be gratefully received.

Hello. My Element Input Validation Fast formula is
Inputs are entry_value (text)
IF ISNULL(entry_value) = 'Y' then
(formula_Status = 'e'
formula_message = 'Must enter something')
If to_num(entry_value) < 1 or to_num(entry_value) >= 40
then
(formula_Status = 'e'
formula_message = 'Night Duty overtime hours only claimable from 1 to 40 hours')
ELSE
(formula_Status = 's'
formula_message = ' ')
RETURN formula_Status,formula_message

Hp Officejet Pro x64 Printer does not print, waiting for available

Many times, when I send something to print, it just says, "waiting for printer availability". I have checked all my settings, and the correct printer is selected. Sometimes I turn the printer on and off, and it might work.
As this is a new printer, I am not happy about this.
Sara McNulty

Hi @SaMac2,
Welcome back to the HP Support Forums! I understand when you send a print job to your HP Officejet 8610, you get a message 'Waiting for printer availability'. Sometimes if you turn the printer off and then on it will work. Please follow the steps listed below:
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Did this help? Please let me know the outcome, I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Colors not printing correctly for OfficeJet J4580

Hi,
I have the OfficeJet J4580. I recently changed the tri-color printer cartridge and now my colors aren't printing properly. I just printed some postage for a package and instead of printing black it printed in red. I then tried a different colored word document and the black printed fine, but the colors on the document are blurry and incorrect. I thought maybe it was a bad replacement cartridge so I exchanged it with another brand new one and I'm still having the same problem. Don't know what to do.

Hello timdar,
All right, remove the cartridges and clean the copper plates of the cartridges and the corresponding part in the carriage manually, just in case there's some dirt or ink that is preventing the cartridges and printer to communicate properly. Use a cloth dampened with some water to clean these parts. You can also see if a copy or a test page from the printer itself shows any issues with the colours or the black. If you check the links in the post above you will find how to print the test page and what it should look like.
If a copy and test pages look all right but the prints from your computer still show these issues, make sure that the correct printer is set as the default printer in Printers&Faxes or Devices and Printers. If it is, power cycle the printer and reconnect the USB cable just in case... Last resort would be to reinstall the drivers for the printer, just delete the printer in Printers&Faxes and reconnect the USB cable.
If this doesn't solve it I would suggest that you return the cartridge to where you bought it. When you get a replacement, make sure that it's an original HP cartridge.

Next-Previous Do not work Properly for lengthly dynamic Where Clause

I have created a View object using Expert Query mode
with following Query:
SELECT LIC_SYS_ID,
LIC_NAME,
TERRITORIES,
LANGUAGES,
MEDIA,
SEGMENT_NAME,
CHANNELS,
ACTIVITY_CD,
LS.LIC_SHORT_NAME,
LS.LIC_AKA_NAME
FROM V_LICENSEE_SEARCH LS
ORDER BY LIC_NAME
Then at run time the following Where Clause staments get added by in JSP based on the users criteria
wClause = "(ACTIVITY_CD = '" + activityStatus + "')"
+ " AND " +
"(LIC_NAME like '" + licenseeName + "%' OR " +
" LIC_SHORT_NAME like '" + licenseeName + "%' OR " +
" LIC_AKA_NAME like '" + licenseeName + "%' ) "
In this case the DataScroller does not work properly It DataTable traves only one setp when I click the "Next" link, But if I use the Drop down list of the Scroller its works fine.
Secondly the "Next" "Previous" links of the DataScroller work fine if I use only one stmt in the WhereClause ex: "ACTIVITY_CD LIKE 'A%'".
Can anybody help me with this, Is this a limitation of DataScroller/DataTable/DataSource tags why does it not work??
Please help me its urgent.
Thanks a ton !!

Thx for the reply, I did try your suggestion It did not throw any exception. Here is the log messages after enabling jbo Debug.
[391] Reusing a cached session application module instance
[392] Getting a connection for internal use...
[393] Creating internal connection...
[394] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
wClause : (ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )
[395] Column count: 10
[396] ViewObject : Reusing defined prepared Statement
[397] $$added root$$ id=-2
[398] Application Module failover is enabled
[399] Getting a connection for internal use...
[400] Creating internal connection...
[401] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[402] <AM MomVer="0">
<cd/>
<VO>
<VO Sz="8" St="8" Def="com.sophoi.ipls.media.tv.businessentities.licensee.LicenseeView" Name="licenseeView">
<Wh>
<![CDATA[(ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )]]>
</Wh>
<Or>
<![CDATA[LIC_NAME ASC]]>
</Or>
</VO>
</VO>
</AM>Long postings are being truncated to ~1 kB at this time.

PR00 does not calculate / deleted for TANN in R/3 for CRM order - Free Good

I hv done free good configuration both in R/3 and CRM.
Main Category - TAN and Free good category - TANN
Pricing for TANN = PR00 and ZFRE -100% discount
When I see result in R/3 and CRM, it does populate PR00 and calculate ZFRE.
While in Order creation in CRM it does calculated PR00 and ZFRE, on order save it replicates order in R/3 but in R/3 it does not calculate or retain PR00 & ZFRE value as a result I'm getting price log error in R/3 saying mandatory condition PR00 missing. Where as in CRM it does not impact calculate pricing.
Note: I don't want to retain PR00 as a mandatory condition and I don't want to change my calculation. Is there any technical solution to achieve this.
Thanks,
Nilesh P.

Hi Nilesh P,
Have you set the parameter PRICINGTYPE to G in table SMOFPARSFA as per note 490932 - 'G' = Copy price components unchanged. If so then the only possibility is to debug the transfer to ERP as per note 656823 in order to determine where the condition value is initialized.
I hope this helps.
Kind regards,
Vanessa.

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

Acrobat Pro XI Will Not Print Word Document with a Rotated Table

I have a MS Word document that is mostly text, but include a table that has been rotated in a text box to fit on the page. When I try to print to PDF using Acrobat Pro XI, the document crashes at the page the table is on.
I have tried several attempts to print using the Acrobat Printer, convert to PDF feature and trying to print just the page alone. Acrobat will simply not print word document with a rotated table.
Any idea how to fix this?
Word 2013, Windows 7, Acrobat Pro XI 11.0.06

In the full document, the print to PDF goes only as far as the table, then ends - not printing the table. The remaining pages are not printed.
For example, I have trimmed the file down to just the table page, and included links to it, and a copy of the PDF it generated.
https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.docx
https://dl.dropboxusercontent.com/u/60543835/Forums/Table%20Sample_140903.pdf
The error message I now get when I try to print is: "There is not enough memory or disk space to repaginate or print this document."
However, with the Task manager open, the memory never seems to get above half of the available (the graph bar fluctuates a little, but stays stable")
The page prints to a regular HP or Xerox printer with no problems.

PDF Form not printing all field/letters properly.

Hi Everyone,
I'm hoping someone can help me.
I recently created a PDF Form to be filled out when setting up an new customer at my job.
After filling out the form one of my co-workers is experiancing an issue when printing. Anytime he has two or more of the same letters in a field, they do not print.
(For example)
[email protected] will print as Je @aol.com and will just pring our a blank field.
Just for fun we tried to pring [email protected] and all we got was " @aol.com".
This seems to only happen on one pirinter and from my one coleagues computer, no one else.
Any ideas?
I did update his Acrobat to the most recent version and restarted the computer but we still have the same issues.
Thanks.

If it only acts up with the one printer. Then it’s a Print Driver Issue. Or some strange Printer problems that can be fixed by:
Quiting the application your using with the printer
Next Unplug Printer.
IF wired Printer (SCSI, Serial, Parallel, USB, Thunderbolt) unplug computer that comes from Computer
Leave everything unpluged for 2 minutes or more.
Plug Power to Printer back in first
Next Plug cable from Printer to computer in
Turn power on to Printer
Open Application
Try to print Document.
If prints okay your done.
If it doesn't Print, obtain the latest Print Drive from Manufacturer
Remove the old driver from computer first.
quit all apps and restart computer before installing new Driver
Install New driver.
Now try to print.
If prints okay your done. If not there is an issue with Acrobat.
Yes a Printer can work with 500 of your applications, and utilities, and not work with a particular application. (Usually a conflict.)
For example Adobe (Acrobat) has a very rich history of conflict with Print Drivers from HP. At time in the past It seemed like a Contest Adobe had seeing how fast they could change something Acrobat/Reader to conflict with HP Deskjet Printers, as soon as HP fixed an issue Hp would change something with a week or two.
Another issue can be be font. Perhaps a Font used in the form is not on the computer that is acting up.

Smart form back page not printing

Hi All,
in a smrt form I am using two pages as first page and term page. for first page the next page is term page with no condition, but it is not getting printed.
help please.
T & R,
AKS

If both of ur pages are using main windows then it will not print.
For this you can do one thing let ur first page hold a main window and here donot mention anything in page attributes next page.
simply create a command. check goto next page : term page
Now create a term page and create a secondary window which is of exact size as first window. and page attributes next page :be empty
If you are asking for term page should be printed at the back of first page. then your first page o/p options select print mode to be D (double sided)

Not printing 'anwers' for calculations / formulas where no input values were given

Similar Messages

Maybe you are looking for