Not understandable message, no sender found..

Hi guys!
I have trobles with my IDoc -> SOAP scenario.. I have configured all needed objects and when I run scenario test, I get error in german: Die nachricht ist unvollstaendig. Es wurde kein sender gefunden. (<a href="http://jarunek.host.sk/sap/error2.gif" target="s">see here</a>)
This means, that message is not understandable and no sender was found.
When does this situation occur? What could be wrong?
Thanx a lot! Olian

Are u using BPM?
Check this out
BPM Message is incomplete. No Sender found
Regards,
Prateek

Similar Messages

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

GMail POP3 problem: Not getting messages with sender "me"

HI guys,
I have an account called [email protected] , I successfully sent mails to the same using javamail.In this messages,sender is marked as "me".
Now I want to read all the messages in inbox,including the messages sent by same account itself.(messages with "me" sender).
But I notices that javamail doesnt read any messages which the sender is "me".
Is there a solution for this?
thanks in advance,
umanga
Edited by: virtualumanga on Jun 6, 2008 7:09 PM
Edited by: virtualumanga on Jun 6, 2008 7:10 PM

Ok.Heres what happens.
When I send emails to the same account using gmail webbase application , those mails (which the sender is "me") are read from my Java-POP3 code.
But when I send mail using my Java-SMTP code , and try to retrieve them using same Java-POP3 program,those mails are not read.
Here is my temp account that I am using
user : [email protected]
password: umanga123
You can see there are 3 mails (please dont delete them) , which were sent using my Java-SMTP code.And one mail which is,sent from my yahoo account.
Below Is the java-POP3 code that I am reading my messages.You can run them your self and see that the messages with "me" and not reading,only the message from yahoo is reading.
You can test following code without any modifications..
Please help,
thanks in advance.
public class MailGet {
 public static void main(String args[]) throws Exception
 String host="pop.gmail.com";
 String user="fhb.test";
 String pwd="umanga123";
 //String from="[email protected]";
 //String to="umanga@quicksilver";
 Properties props=new Properties();
 props.put("mail.pop3.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
 props.put("mail.pop3.socketFactory.fallback", "false");
 props.put("mail.pop3.port", "995");
 props.put("mail.pop3.socketFactory.port", "995");
 //FileInputStream fis=new FileInputStream("/home/umanga/pop.prop");
 //props.load(fis);
 Session session=Session.getDefaultInstance(props,
 null);
 try {
 Store store=session.getStore("pop3s");
 store.connect(host,user,pwd);
 Folder folder=store.getDefaultFolder().getFolder("Inbox");
 folder.open(Folder.READ_WRITE);
 System.out.println("Getting messages");
 Message msg[]=folder.getMessages();
 System.out.println(folder.getMessageCount()+" "+folder.getUnreadMessageCount());
 for(int i=0;i<msg.length;i++)
 System.out.println("Subject: "+msg.getSubject() );
 folder.close(true);
 } catch (Exception e) {e.printStackTrace(); }
Edited by: virtualumanga on Jun 7, 2008 4:45 AM
Edited by: virtualumanga on Jun 7, 2008 4:46 AM
Edited by: virtualumanga on Jun 7, 2008 5:21 AM

National Access Coverage Not Available message when sending picture message

I don't understand why this is happening. I have a strong signal and my 3G indicator is on. Why is it trying to use National Access? How do I send this message? HELP!!

This seems to be a problem that comes up occasionally. I have a Droid2 and keep getting this same message when trying to send a picture message to someone. I've checked the version settings as was listed in one of these post and everything matched. And I did a update...
I still get this message.
any other suggestions?

Mail will not allow messages to send...

So I have 2 POP accounts in Mail that I recently set up. Both receive mail without any issues, however, neither will send mail. Both outgoing servers are correctly typed in the outgoing server preference, and also I have selected that no authentication is necessary. Any ideas?
Thank you,
Chris

Hi Ernie,
One of them isn't for sure, the other I'm not sure about. The ISP I am using is actual an ethernet on the campus of the lab I work in as a grad student. One of the email addresses uses the SMTP of this school (ie, its a school email account, so I imagine it is as close as I could get to an SMTP native to the ISP). I have pinged both outgoing mail servers, and they are on and active according to the pings. There is no firewall on according to my sharing preferences. How do I check for freedom of movement on port 25?

Batch Derivation - No sender found during manual derivation & order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

Batch Derivation - No sender found during both Manual deriv & Order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

Message from PE is incomplete. No Sender found

Hello,
Transaction SXMB_MONI shows three messages. The first two are sent to integration process IP_PORDCR1, the third is received from integration process IP_PORDCR1. The last message has a sender interface MI_IDOC_PORDCR1, but no sender service. Therefore the receiver determination |IP_PORDCR1|MI_IDOC_PORDCR1 is not found. Why does this message not have IP_PORDCR1 as sender service?
Kind regards,
Jurgen van der Eijk

Hi Ram, Have a look at this forum thread,
you might get your problem's answer by this :
BPM Message is incomplete. No Sender found
thanks,
pooja

BPM Message is incomplete. No Sender found

Hi,
i am not strong in using BPM, i have searched related to this error on sdn, but still not find.
bpm step
receive1, receive2 in fork in block, out of block transformation and then send step.
receiver determination
BSFILE01 -> BPM (no map)
BSFILE02 -> BPM (no map)
BPM -> BSFILE03 (map2)
i made two mapping in IR,
map1 : N -> 1.
BSFILE01 and BSFILE02 TO ABS(1)
map2 : ABS(1) TO BSFILE03
configuration time does not use map1,
bpm was received two receive in fork as well and then
my XI 3.0 sp info is SP15
error message on moni , but no error on PE, everything green.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">MESSAGE_INCOMPLETE</SAP:Code>
<SAP:P1>Sender</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is incomplete. No Sender found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
venjamin
Message was edited by: venjamin
Message was edited by: venjamin
Message was edited by: venjamin

Hi,
Are you trying to collect 2 different files into a single file or multiple same files into a single file?
If you are trying the former, which I think you are doing as you are using a fork with coreelation to collect the 2 files, you need to have a mapping step which will combine these 2 files into a single file ( N:1 ) mapping and , there is no need for a multiline container element as, both the files are of different message types.
Is this what you are tyring?
Regards,
Bhavesh

New Deployment: Outlook Can Send but not Receiving Messages

We are in the process of setting up/testing a new installation of Exch 2013 for the first time. We created a Send Connector (Used MX records option) and left Receive connectors as is. We set up a test user in AD, then created mailbox with valid email
address. We are using Outlook 2010 (on Windows7) to connect to Exchange, which was successful (use the automatic , not manual configure option).
From Outlook, we can send an email to external address successfully. We cannot receive an email. We check the webmail account provided by our email host and the email is in the account.
Note, with this same email host, we used the POP connector in EXCH2003 to get our email. We wanted to use SMTP to receive email in Exchange 2013. Could this be an issue at our email host (could they require POP connection) OR is there a service will
need to enable/add in EXCH and if so where is it?
Also, we used the Microsoft Connectivity Analyzer for this test user and both SMTP Inbound and SMTP Outbound passed.
One thing we just noticed is that the mailbox for the testuser must contain a few messages because of its usage report..Outlook just can't pick them up maybe...How can we tell if the mailbox has our test emails in it?
Another odd thing is that within Outlook, under Mailbox Cleanup, it shows that the Inbox should has a size of 12KB, which would be about the size of our test messages to it:
Since our posting..we have looked at the mailbox using OWA and the Inbox has nothing in it there either. We tested internal email between this test user and the Administrator account and we can send and receive into the Inbox, both in OWA and Outlook, just
fine...We did a search on the mailbox using the EAC and it did not find anything.

We have MX records pointing to our domain that we use for email, but I do not think to our Exch2013 Server. We use them now with Exchange 2003. When I do NSLookup for our domain name it returns (2) MX records from our email host that I would expect,
as they have always been there since the exch2003 box.
NSLookup does not return mail.domainname.com on the list of MX records. If I ping mail.domainname.com, it returns the public static IP address of our exchange server given to us by our ISP...but is that because I added that A Record today?
I do not understand your statement... "To receive mail you must post your domain in the form of an MX record". Maybe there is something I need to add at my web host (Network Solutions)?? Do I manually add a MX record called mail.domainname.com?
Like here circled in red (I did not add it yet): If I need to do this, I am unsure of the priority number? I don't want to interfere with our EXCH 2003 server while doing this testing.

Every time apple sends an update for my Itunes it goes wrong. last time this happened I got someone to fix it for me. I am very techno phobic and do not understand the on line instructions for uninstalling and reenstalling.Please help in simple English.

when ever Apple sends an update to my pc, it knackers up my itunes. The last time this happened I got someone to fix the problem for me, I am very techno phobic and do not understand the uninstalling and reinstalling. It comes up error MSVCR80. Please can someone help in simple English , as the technical jargon just goes over my head.
much Thanks

The last time this happened I got someone to fix the problem for me, I am very techno phobic and do not understand the uninstalling and reinstalling.
I think you should get a friend or family member who knows a bit more about computers to fix this for you.
They should try the following instructions.
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

Mail program not recieiving messages, but I can send. I use .Mac to get mai

My Mail program is not receiving messages all of a sudden. But I can send.
I have to get my mail at .Mac. Just tried fixing permissions. No luck yet. I just sent myself an email and it came into .Mac but not to my Mail program.
What have I done?
PowerBook G4 Mac OS X (10.4.9)

You're welcome.
More than likely .Mac but to confirm, at the menu bar for the Mail application go to Mail > Preferences > Accounts.
Under the Account Information tab for your .Mac account preferences, what is shown next to Account Type?
If .Mac, a .Mac type account with the Mail application is really an IMAP account and behaves in the same way so try using the Rebuild Mailbox function on the Inbox mailbox for your .Mac account.
If there is a black triangle to the left of Inbox in the mailboxes drawer, select it pointing it down to reveal your .Mac account named Inbox mailbox. Select the mailbox and at the menu bar go to Mailbox and select Rebuild.
All messages in the message list for the account's Inbox mailbox will disappear temporarily and the mailbox will be resynchronized with the server.

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

Not understandable message, no sender found..

Similar Messages

Maybe you are looking for