Not update no service?

From 7.0.4 to 8.1.2 and I didn't update so now my iPad4 is not avaliable to use the cellular so Is updating software affect to this case?

Hi and Welcome to the Community!
You might want to, instead of a mere update, perform a full OS reload. First try via this method:
http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-O...
And if that fails try this more "forceful" method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Planner group is not updated in service notification using BAPI

Hi,
Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
I have written the below code, but planner group is not updated in the service notification.
Please advice which parameters do i need to pass to update planner group in the service notification.
          wa_methods-refnumber      = '000001'.
          wa_methods-objecttype     = 'PARTNER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000002'.
          wa_methods-objecttype     = 'HEADER'.
          wa_methods-method         = 'CREATE'.
          wa_methods-objectkey      = wa_subscr1-aufnr.
          APPEND wa_methods TO i_methods.
          wa_methods-refnumber      = '000000'.
          wa_methods-objecttype     = ' '.
          wa_methods-method         = 'SAVE'.
          APPEND wa_methods TO i_methods.
          REFRESH i_partner.
          CLEAR wa_partner.
          wa_partner-orderid        = wa_subscr1-aufnr.
          wa_partner-partn_role     = 'VW'.
          wa_partner-partn_role_old = ''.
          wa_partner-partner        = wa_subscr1-parnr.
          wa_partner-partner_old    = ''.
          APPEND wa_partner TO i_partner.
          REFRESH i_planrgrp.
          CLEAR wa_planrgrp.
          wa_planrgrp-orderid        = wa_subscr1-aufnr.
          wa_planrgrp-plangroup      = wa_subscr1-ingpr.
          APPEND wa_planrgrp TO i_planrgrp.
          REFRESH i_planrgrp_up.
          CLEAR wa_planrgrp_up.
          wa_planrgrp_up-orderid     = wa_subscr1-aufnr.
          wa_planrgrp_up-plangroup   = 'X'.
          APPEND wa_planrgrp_up TO i_planrgrp_up.
*----Change order details with Technician name
          CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
            TABLES
              it_methods   = i_methods
              it_header    = i_planrgrp
            it_header_up = i_planrgrp_up
              it_partner   = i_partner
              return       = i_return.
Thanks & regards,
Krishna

Try this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL.                                               " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0.                                                             " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a®

Invoice not updated for Service and limit items

Hi All,
For service and limit we are not able to see the invoice document in the "Related Documents" tab in the Purchase order.
For material I am able to find the entry in the tab but the invoice statistics data is not getting updated for service POu2019s and also for limit item POu2019s.
Found a note for the same : 1462644 - Empty statistics in PO in case of Extended Classic Scenario but it works only for material line items only.
Please let me know if any config change need to be made else if there is any SAP note that would resolve this issue.
Thanks in advance.
Regards,
Catherine

A knowledge based article note was applied to resolve the issue.
Regards,
Catherine

Assignemnt field (ZUONR) not updating for Service Order RAS

Hello Experts,
I am facing an issue in service order RAS (Order Related Billing), here assignment field (VBRK-ZUONR and BSEG-ZUONR) is not updating against document type RV.
Same is not reflected against customer in FBL5N also.
Please suggest.
Regards
Rajat

Hi
Check the copy rules in tcode VTFL and/or VTFA. Check the field for assignment number. Check also the VOFM subroutines.
Also, check Note 301077 - User exits for the interface to accounting to change the value of ZUONR in BSEG (in ACCIT in the interface of this FM)
Regards
Eduardo

Account Assignment WBS not updated in Service PR

Dear Expert
I am creating Service Purchase Requisition from project but in Account Assignment only network is coming , our requirement is WBS as account assignment,
in Account assignment tab WBS field is coming but WBs is not updating,
pls suggest , is there any configuration issue ??
rgds
rkp

I think it is standard .
If you need WBSE then create manual PR with account assignment P.

RNOTIFUPDATE01 - SAP Status not updated from Service Desk msgs

Hi Folks,
Already for some days we're facing the issue that SAP status of Solution Manager msgs that are sent to SAP is not updated in the SolMan itself.
So, if a msg is send to SAP, and SAP made an update and changed their status to 'Customer Action' or 'Solution Provided', the status in SolMan is still 'Sent to SAP'. Only at the marketplace we're able to see the real status.
The job RNOTIFUPDATE01 runs successfully every hour, no errors listed.
However when I run the job manually in SE38, i get a message like:
9999017765 012005041000000066052008 Read/Update Error
9999017765 012005041000000066052008 Locked, Entry in DNOD_UPDATE Successful
Searching for these errors in the notes, gave me some results, but unfortunately these corrections are already in our system.
Our patch level is SAPKA70015, SAPKB70015 and SAPKITL426.
I'm not 100% sure, but I think that it is related to installation number, as some msgs are updated and other aren't.
Does any of you has an idea?
Thanks a lot for your help folks!
Roel

Hello Roel,
The update of the status in the Solution Manager service desk document (usually SLFN), to match the SAP one, is managed by the method AISDK_SP_CHECK_DNO. To configure this, do as follows:
- Execute transaction SPPFC, selecting the Application DNO_NOTIF
- Open the action profile SLFN0001_STANDARD_DNO (or the one you created as a copy)
- Open the action definition SLFN0001_STANDARD_DNO_CHECK (or the one you created as a copy)
- Under "Processing Types", check if the method AISDK_SP_CHECK_DNO is set (if not, set it as the method to be called)
- Check the method parameters:
USER_STATUS1 is the status that was set BEFORE SAP answers
USER_STATUS2 is the status that will be set WHEN SAP answers (this is the one you should modify)
Save everything and test.
Please let me know if this works for you.
Best Regards,
Cristiano Canzone

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. right now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service" any ideas on what i shud do?

I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?

Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore

I have bought three iPhone 6 one for me and one each for my two kids we have just done the update iOS 8.01 now all phone do not connect to service provider and touch id is not working , APPLE HELP !!!!

i phones updated iso 8.01 all three phones will not connect to service provider and touch id
will not work APPLE HELP !!!!!!!!!
anyone know i fix as i have spent over 2000 pound on three phones that won't work
all three where working fine until the 8.01 update

Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
Update:
Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

Can not update service call

Hello
i try to update Service Call and i get this error :
This entry is already exists in the following tables ASC5 ODBC-2035
and i can not update.
how can i solve this error?
Edited by: Einat Yulzari on Dec 14, 2010 10:11 AM

Hello,
You have to restore the numbering series to get this issue resolved however, this has to be done under supervision of SAP. You may take a back up of the database, restore the numbering series to see if this issue still exists or not?
Thanks,
Joseph

Service Contracts with billing plan not updating debit memo request in ECC

For service contracts with billing plan, we cancel the line items and set the user status at header to "cancelled" and also set the cancellation date (under Cancellation Tab) at the header as well as item level which delete all items in the DMR in ECC (which are not yet billed). When we do this, it works perfect for most of the time and in some cases DMR items are not updated in ECC and it is billing. When I checked in CRM, the billing plan items are updated based on the cancellation date.
Experts appreciate your help on this issue.
Thanks,
George.

This is resolved by the note 1008663

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

Service Plan not Updating

Team,
I've created a fairly simple service which creates a service item, calls a CPO process via service link then updates the service item upon completion.
Only the update isn't working. I can see the updated information in the request form but the service item never gets updated. The plan in the request says that the udpate step is executed but when I check the service item history, it only ever lists a create step.
Any clues on how to debug this? I don't really want to recreate the entire service from scratch but I really don't know where to start picking at it.
Ryan

All service items have a reserved property called "ErrorDescription". You should include this in your service item based dictionary that you are using to create/update the service item. You can hide this on the form when Moment is Ordering and show it when Moment is Service Completed. After a SIT (service item task), this field will contain any error message related to updating the service item. For debugging, you might also want to show the Name field if you are not showing it already.
Common reasons it would fail:
1) No Name property was specified when creating the SI
2) Name property does not match an existing SI for update
3) One of the properties has an invalid value for the field (wrong type, too long, etc).

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

FMCN - Open Item upload Commitment not updated in case of Service Entry

Hi All,
I am trying to use FMCN to update commitment and fund centers in open PO's and GR's, however where there is material PO's it updating perfectly but if there is Service PO then it is not updating in GR/IR account with non budgeted commitment Item.
Here in this client what they have done whenever they create the service entry sheet same time GR (MIGO) entry will get generated and then user can do the MIRO for the same.
Please help me to update the same with Non Budgeted commitment.
Regards,
Alok

Hi
check this table also
ESLB Service Type Header of Standard Service Catalog
ESLH Service Package Header Data
ESLP Service Item
ESLL Lines of Service Package
i thing this only link between purchase table like Po table and service PO table
so we can link service po logic for service Po
Regards
kailas ugale

Service Tax not updating in Table J_1ISERVC

Hi,
When i do Service Tax scenario, I have done the process from Sale Order and billing and other things. postings are made correctly. But the service tax values are not updating in Table J_1ISERVC
Because of this issues,we are not able to generate ST3 Report. Please provide me some inputs regarding this..
Thanks
Sasi Kanth

Hi,
For service Tax report, there is a report called ST3 but it is not yet implemented by SAP and still it is in testing. So, we need to develop an ALV report for Service tax from this Table.
That is the reason we need to update in this table. Kindly provide me few inputs.
Thanks

Not update no service?

Similar Messages

Maybe you are looking for