Not Working Hard Drive

HI~
I bought Hp Pavillion 110-014 ( Nov/2013, Office Depot).
Not working Hard drive.
computer is not reading hard drive,
When I Turn On it, It is preffering Fix Computer......and then after 20 minute, Monitor is Blank
I try Hard Drive Connect another Computer(HP 500-056) but Not working,
how can i Fix It?

JHLEW, welcome to the forum.
I suggest running the hard drive diagnostics from the BIOS. This will tell you if the hard drive has failed.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

My macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive on it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right?

my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.

Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

DANGER: Do Not Change Hard Drive Ownership and Permissions

DANGER: Do Not Change Hard Drive Ownership and Permissions (Unless you know what you are doing... I didn't!)
FIRST, THE REPAIR PERMISSIONS SOLUTION:
Use Disk Utilities on the "Sofware Install and Restore" DVD that came with your computer to set the permissions back to the defaults. Not the MacOSX Installation Disk. (This worked in MacOS 10.3.9)
MY SCREW UP
In my Hard Drive's "Get Info" dialog I switched the permissions of the Owner to my username and all others to no access. I had not yet closed the dialog and decided that it was probably dangerous so I started changing them back. I first changed the owner back to system. It asked for authentication.
After entering my password I assumed that I would be able to go back and change the others as well. Nope! The dialog disappeared, my desktop disappeared and I couldn't do anything. I was locked out.
After ten minutes of the beachball I restarted to the "Panther Installation disk" and tried repairing permissioins using disk utility. Evertime it "lost contact" with the system and would not work. Restarting (without CD) took me to a root user login (black sreen). My username and password did nothing.
THE SOLUTION
I then restarted to the "Software Install and Restore" DVD that came with my computer and used its Disk Utility to repair permissions. IT WORKED! It set permissions back to the default. THANK GOD.
NOTE: I wonder, will using the Install and Restore DVD to repair permissions reset any computer's files to the defaults? Is that a backdoor into someones currently restricted files and folders? (Assuming that you have physical access and the computer specific DVD)

Using the Repair Permissions function will not change the permissions on an account's home folder or anything in it, but there are at least two other ways in which someone with a Mac OS X 10.4 installation disk can get access to an account's files or folders unless some or all of those files are encrypted.
(19285)

Can't get computer to see galaxy note 3 hard drive?

can't get computer to see galaxy note 3 hard drive?

One last thing to add into the mix.
As you know your Router will have to probably need to be manually confiqured.
Your Router has an IP address of 192.168.1.1
The 1st port to the first machine should have an IP of 192.168.1.2
The 2nd port should have 192.168.1.3
Each corresponding port needs to have assending IP addresses.
Checking the paperwork that came with your Router will explain how to manually confiqure it.
Sometimes a complete System reset will also help.
Modem Router and Shutting off all the machines.
When powering back up start with your ISP's Modem and after it has aquired the signal and lights then you can power back your Router, and the same there wait for it to reacquire the signal and the lights each will take a minute each. Now you can restart your computers one at a time and try them. You might want to double check the cable on your troubled machine and also try switching the ports on the router and if none of this works it sounds like a bad Ethernet Card.
Don

Logic Board Does Not Detect Hard Drive???

Problem on startup shows "Folder with (?) Mark on it". Tried to use Disk Utility but it does not detect. Replaced drive and still nothing. Use the drive as external and it boots normal. It looks like it's something else. I have order a new cable connection that goes from the logic board to the hard drive, as it's cheaper to obtain than a logic board, but lets just say that it wasnt that and there is a problem with the logic board, can I buy a "9.5 mm SATA Optical Bay SATA Hard Drive Enclosure" to place the hard drive and boot from it? When I went into Disk Utility it did detected the DVD drive, so I know that portion of the logic board works fine. I don't use or need the DVD drive, and wondering if I can do this, it cost less than buying a logic board.
Please let me know if this is possible, Thanks in advance.

Well logic board seems faulty from the connecting point of the hard drive but not from the optical drive. Optical drive is detected by the Disk Utility, but not the hard drive, and thats why I was thinking of using the optical bay to run the machine.

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC., How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since not enough hard drive space in my PC.

How can I upgrade iOS5 into my iPAD2 without sync anything into my PC since my PC not enough hard drive space.

You'll have to delete sufficient GBs from your HD or transfer GBs to a second HD to free up sufficient space.
Also look at these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Msi nf980-g65 Not detecting hard drives

I hope someone can help me while tech support is closed. I'm doing a new build. When I fired it up the MB detects the CdRom but not the Hard Drive. I tried switching the hard drive to an old PC and it detects it fine there.
Thanks!

Thanks Jack, I'm sure you love the noobs...here's the info:
■CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz
■MSI: NF980-G65, MS-7612 v1.0
■Memory: G.SKILL Ripjaws Series 4GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Model F3-12800CL9D-4GBRL
■Video card: XFX GeForce 9600 GSO 768MB PCIe
■Hard Drive, Western Digital Caviar Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s 3.5"
■Hauppage 2250 Tuner Card
■Operating system: Will install once hard drive is recognized
■Power Supply Unit: Rocketfish 700W, 30A

TC wireless works TM does not see hard drive Help?

I got TC last night and I got the wireless to work but it does not show up as a hard drive for Time Machine any help

You have to go in through finder...on the left hand panel, you'll see TC, or whatever you've named it, listed. Click it, and click connect on the upper right hand side of the finder pane. You'll need to know whatever password, if any, you assigned it.

IMac not reading hard drive, spotlight not working, all my files not showing... help!!!

Hi folks,
I got home from a three week trip and turned on my imac, at first i realized it was running extremely slow. Then i plugged in my external hard drive, and it didn't read. I checked in disk utilities and profiler, and my hard drive was there, just not appearing in finder or desktop. I couldn't mount (it was grey) the hard drive in disk utilities either. (I tried with other hard drives, same problem; they all worked before)
Afterwards, I found out that spotlight wasn't working at all, it wasen't even initializing (see attached screenshot). When i opened "all my files", nothing appeared in the window - it was blank. Another thing is, launchpad scares me - it loads incredibly slow and the screen keeps refreshing itself.
Please help!! I don't want to reinstall the whole system and lose all my file, cause right now, I cannot backup anything since it won't read my hard drives!! Could this be some kind of apple-virus..
Anyone else with a similar situation? My system is 10.7.5, processor: i3

This is not related to any kind of malware.
It sounds like something is going very wrong with your machine, but I'm unsure what that might be that would prevent all external hard drives from working. Are you able to start up in recovery mode (hold down command-R at startup)? If so, from recovery mode, open Disk Utility and select your internal hard drive. What does the SMART Status say?

If the problem's not the Hard Drive, what is it?

My Powerbook G4 got knocked off a table and started acting up right away (crashing, freezing). I did a disk doctor check and it said my HDD was fine. I formatted the disk just in case and reinstalled the OS. It still didn't work. I brought the laptop to the Genius Bar, who told me that it's still probably the hard drive, even though Disk Doctor gave it a clean bill of health. So I bought a new hard drive and carefully and tediously installed it. I then formatted it and installed a new OS. Seemed fine. I ran the intro and all that, then shut it down, thinking all was well. The next day I booted it up, got the chime and apple logo, and the progress bar went about 20% and then froze. It now does that every time I try to reboot and the only option is to hold down the power button to shut it down.
So, to summarize, the thing won't boot into the OS and I've replaced the hard drive. What else could the problem be?
Message was edited by: Rob Lichter

OK, I have a G4 powerbook with a new 80gb hard drive.
You have either a 2004 PB G4 12" 1.33 GHz or a 2005 PB G4 12" 1.5 GHz computer. In either case, if you have the orginal HDD in the computer it is at an age where it will be functionally and physically degraded. Replacing the HDD was likely the right move.
I installed a 518 RAM card before this issue arose, but the problem seems to exist independant of that RAM.
You likely installed a 512 MB module.
Apparently the fall did something else to your computer, but it is not possbile to tell at this point. I suggest that you proceed as BGreg suggested. Boot from the Apple Hardware Test disk that came with your computer and run the extended tests in a loop (hold down Control + L during tests) and let it run for several hours, if necessary, as it may take a while for intermittent issues to surface.
cornelius

Not Enough Hard Drive Space on my Mac Mini to Save Deleted User Account Folder: What to do?

I am no longer able to access my original user account on my mac mini because the account is corrupted and won't load. Thanks to the helpful advice I found on the internet, I was able to create a new user account and resume using my mac, but all of my old files are trapped in the old user account.
The plan was to delete the old user account, create a disk image of the old account folders, and then migrate those folders to the new user account. Unfortunately, I don't have enough disc space left on my Mac to do that. I have just under 11gb left after deleting absolutely everything I could, and I need 81gb for the old user files. The back up plan was to select the "don't change the home folder" option, but when I went to delete the account, there was no such option. The message simply read:
"The user's home folder will not be saved. To do so, you need 81.1gb of free disk space. Try emptying the trash or deleting other files on your disk, then deleting the user account. If you do not want to save the user's home folder, click delete immediately."
My only two choices were CANCEL or DELETE IMMEDIATELY. There was no "don't change the home folder" option.
So I am not sure how to proceed. Here are some questions:
1) is there a way to save the disk image directly to an external drive instead of the user's folder on the mac hard drive?
2) If I use the "delete immediately" option, will the files go into a "deleted users" folder where they can be recovered or will they just be erased from the computer and unretrievable?
3) Is there a way to use terminal to change access permission on the original user account files so that I can copy them onto an external drive or integrate them with the new user account without having to first delete the original user account?
4) In the absence of deleting the user account, will using either:
sudo chown -R `id -un` /Users/oldusername
and/or
sudo chmod -R u+rw /Users/oldusername
in Terminal allow the new user account permission to access the original user files and merge them seamlessly into my new user account? Or must I delete the original account first?
5) Is there something else I haven't thought of that would work, would be more efficient, or more effective? This wouldn't be the first time I have overthought a solution...
When considering any solutions, please keep in mind that I cannot launch the original user account as that starts the whole endless loading loop. So, while I have the password for the original user account, any solution would appear to require that I work from the new user account only, without launching the old account. Also I am a complete newbie at this. I've used Macs exclusively for 17 years but this is the first time I've had to do anything like this. Up to now, everything has always "just worked". So please be as detailed with any instructions as possible!
Any help greatly appreciated. Thanks!
Mac Mini 2ghz 1g ram running OS 10.4.11

I think ComputerFixer is correct, you should be able to drag and drop it to another drive, no worries. However, if not, you could create an disk image of it using DiskUtility and create it on a new drive. But again, I don't think that is necessary. If you have administrator rights with your new account, can you simply go into the old user account folder and drag and drop the files you want to save? I have done that as well as copy the older user account to another drive (in my case, another computer on the network) and salgage my files from there. Is that an option for you?

My computer is ill, does not recognise hard drive and so can not restore

Hello there, I'm new to all this but would be thrilled if someone could help,
I've had my iBook for going on three years and it crashed yesturday. To my horror it would not start up again afterwards. I heard the chime but then only a grey screen, I have had something similar before and been able to load up from the install disc and restore the software. However when I get onto the install disc and get as far as selecting the device/volume or whatever the hard drive is not listed! when I quit installer and go to the disk utillity option the Hard Drive is listed but no 'volume (as I believe is the correct term) is listed below. As most of my stuff is luckily on a external hard drive I decided to use the Erase facility (the only apparent option) to hopefully re-awaken the hard drive. But this did not work and I see no way of starting up from the hard drive. As a apple store will charge £60 just to look at it I am keen to identify the fault myself. Is the hard-drive simply given up? would a new hard drive (however tricky to install) be the solution? Or could it be a range of things? That only apple people should diagnose? what are my options? I'm a panicking design student who's mac hasn't let me down yet.
Many Thanks

Hi Dave,
Welcome to the Discussions.
It's possible (more likely the drive is dead) that the drive's directory is damaged. If that's the case, Disk Warrior may be able to fix it. At $80US for Disk Warrior, I'd be more inclined to replace the drive. If your patient and can wield a few small tools, you can replace it yourself.
http://www.ifixit.com/Guide/
John

Not Working Hard Drive

Similar Messages

Maybe you are looking for