Nota fiscal send from R/3 to SAP GRC NFE
Hello Everyone,
We have send NFe from sap r/3 to sap grc nfe thru RFC . We cannot trace in GRC .
What could be the possible error .
please help.
Honey
Hi Honey,
If configuration is correct on R/3 you can see the received data on tables /xnfe/nfehd (header), /xnfe/nfeit (item) and /xnfe/nfe_hist (history).
A good approuch to you check what system is being called is put a break-point before R/3 call GRC on the end of function J_1B_NF_MAP_TO_XML or include LJ_1B_NFEF42.
You can easily start debug on R/3 and follow inside GRC automatically when debugging, but the user of RFC need to be DIALOG and have debug rights. It's not possible do it with a service user.
Check if the correct FM is being called /xnfe/nfe_create, for other messaging system the FM is J_1B_NFE_XML_OUT (if customizations is wrong you will check this error on ST22 on GRC).
Kind regards, Fernando Da Ros
Similar Messages
-
SAP SP necessária para suportar os componentes para o SAP GRC NFE 1.0 no XI
oi,
Como estamos atualizando as nossas caixas de XI de SAP XI SAP PI 3.0 para 7,11, verificando o SLD notamos que Nota Fiscal componente de software está disponível. Assim, a pergunta é o que é que os Service Packs do sistema fonte precisa ter, a fim de fornecer todos os componentes necessários para a NF-e?
temos dois sistemas de fonte da qual enviamos os dados para XI, você pode sugerir o que é o pacote de serviços adequados para apoiar SAP GRC NFE 1.0 no XI
1> 6,0 SAP ECC, SP, 14
EHP 2, Nível 2
PI_Basis = 2005_1_700, Level 14
ST = PI 2008_1_700 Nível 2
2> 6,0 SAP ECC, EHP 4
Muito obrigadoOla, vi o seu e-mail mas resolvi responder por aqui!
Na realidade, se voce for realmente trabalhar com o GRC, dependendo da secretaria da fazenda que voce ira trabalhar aconselhor que voce aplique o sp15 no grc, consule SAP Note 1487119, nessa nota haverao todos os procedimentos necessarios.
Como haviamos falado anteriormente por e-mail, seria necessario, caso vc realmente queira trabalhar com o GRC a aplicacao de algumas notas tecnicas no proprio GRC.
1477834 XML Layout Version 2.00: Missing parameters in NF-e BAdI
1487119 SAPK-10015INSLLNFE: Support Package 15 for SLL-NFE
1496216 Rejection of NFe because of wrong data type of date fields
1499921 Problem with validation after implementing SP15
1498700 Problem on signing NF-e
1497767 Fill field qTrib for new layout version 2.0
1500046 Upgrade validation rule for field ID for version 2.0
1500742 Adjust validation for field NADICAO and NSEQADIC layout 2.00
1501545 Problems in trying to see a XML in the IE
1502612 Select the NFe Status Check Service for Incoming B2B message
1502217 Extend validation rules for <DI>/<adi>, layout 2.00
Sem mais, precisando me mais ajuda avise -
Hello,
eu estou trabalhando no electronica fiscal de Nota. Nós temos seguintes sistemas: --
SAP R/3 -
SAP GRC NFE--JAVA (assinaturas digitais)-SAP NETWEAVER PI/XI -
As AUTORIDADES (PARA A AUTORIZAÇÃO)
como eu verificam a conexão entre estes sistemas. Como eu sei uma comunicação existe entre
SAP GRC NFE--JAVA (assinaturas digitais)-SAP NETWEAVER PI/XI -
A conexão das AUTORIDADES (PARA A AUTORIZAÇÃO)
foi feita já com sucesso entre SAP R/3 E SAP GRC NFE através do RFC.
Por favor ajuda.
Agradecimentos adiantado,
HoneyBom dia Honey,
Além da comunicação entre os sistemas, você deve customizar as Sefaz-es e também os CNPJs na SPRO do GRC.
Acompanhe as telas aqui:
SAP GRC NFE 1.0 - New Solution Introduction & Implemention Best Practices
Você pode testar o serviço assinador (java) diretamente pelo web service:
Web Service Navigator
Leonardo deu uma boa dica para testar o customizing dos serviços e comunicação com o sistema externo (Sefaz).
Atenciosamente, Fernando Da Ró -
SAP GRC NFE não processa NFE's com itens que possuam diferentes alíquotas de IPI.
SAP GRC NFE não processa NFE's com itens que possuam diferentes alíquotas de IPI.
Alguém sabe se esse problema já foi resolvido ou conhece um contorno para essa situação ?
Desde a implantação em junho de 2013 não conseguimos processar notas que possuem itens com diferentes aliquotas de IPI.Bom dia Fernando (que bom te encontrar aqui também :-)!
Então, o Denny da SAP Alemanha me retornou dizendo que temos que instalar o XI Content SLL-NFE 10.0 e criar novamente os cenários da NF-e.
Eu estou entrando em contato com o nosso Basis que fica em Lima para ver se é possível que ele instale este componente, para que eu crie novamente os cenários da NF-e (extensão _900).
Após a recriação dos cenários, será que eu consigo reenviar as NF-e de teste novamente ou terei que estornar os documentos e fazer os processos novamente?
Obrigado pela ajuda!
Att.
Daniel -
Mails not receiving send from a particular userid
Hi all,
I have a program which will send mail to outside mailbox using a FM.
When I logged in SAP using my userid and send the mail, its not reaching the receiver. But at the same time I logged in using my colleagues user id, the mails are reaching the same receiver. Here everything is same, except login id.
I have checked in SBWP, in SOST and in SCOT where it shows GREEN everywhere. Nothing is pening/waiting anywhere.
What would be the reason. Please help.
Regards,
Vinithacompare both users in SO12
hope that helps
Andreas -
SAP GRC NFE 10.0 - Outbound B2B
Pessoal, estou tendo um problema no envio de e-mail através do GRC. Procurei no fórum mas não encontrei nada que me ajudasse, por isso vou tentar detalhar o máximo.
A implementação foi baseada nesse artigo:
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=315524420
Meu problema agora está na URL do canal de comunicação. Tentei utilizar smtp://nomedoservidor, como no artigo, mas houveram vários erros, entre eles, um que haviam vários tópicos sobre ele:
server not responding OK to AUTH; 535 5.7.3 Authentication unsuccessful
Aqui nós utilizamos o Exchange 2010 SP3, e ontem o responsável por ele fez vários testes, até não conseguirmos fazer mais nada e ele abrir um chamado com a Microsoft. Tentamos de tudo (segundo eles), e no final o pessoal da Microsft sugeriu que fosse aberto um chamado na SAP...
Não entendo de Exchange, mas disseram que liberaram tudo no Relay:
Após isso, fizemos um teste no canal de comunicação utilizando a URL imap://servidor. Tentei com autenticação, sem autenticação... todas formas possíveis e imagináveis que essa configuração permitia...
Sem nome de pasta alguma, ocorre o seguinte erro:
unexpected append response; read 001I BAD Command Argument Error.
Por último, criei uma pasta Teste dentro desse e-mail, e alterei a URL para imap://servidor/Teste
Finalmente o e-mail (pelo menos) ia para a pasta criada dentro desse e-mail:
Bom... não faço mais ideia do que eu poderia testar. Tentei colocar algo como /SENT, /OUTBOX para ver se esse e-mail ia para a caixa de saída do Exchange, mas nada...
Alguém tem alguma idéia/sugestão do que eu possa fazer?
At.,Bom dia, Ricardo
Obrigado pelas sugestões. Conseguimos resolver depois que o responsável pelo Exchange fez mais algumas liberações, mas, também havia um erro na nossa classe java... Nossa constante com o nome do e-mail from, estava com um ";" :
private final String NFe_Mail = "[email protected];";
Feito isso, tudo deu certo.
(detalhe, só depois de rolar uma "força tarefa" para tentar identificar o problema é que fomos isolando até chegar nesse último detalhe)
Obrigado! -
Variável ISS - PLD Nota Fiscal
Boa Tarde,
Meu nome é Juliana Sanna e sou da Zethos Consulting. Preciso da ajuda de vocês no seguinte item:
Estou gerando o PLD de uma nota fiscal de serviços e nao consegui localizar a variável para o valor do ISS - não o retido mas o que é calculado pelo código do imposto ISS.
Já pesquisei no documento How to Modify Nota Fiscal Report e também no SAP Notes nao consegui localizar.
Obrigado
Juliana Sanna
Edited by: Rui Pereira on Dec 10, 2008 10:28 AMBoa Tarde Juliana
As variáveis que se encontram no documento que referiu são às únicas disponíveis atualmente para a localização Brasil.
Sugiro que criei no forum como referido na nota SAP 1028874 uma solicitação para o efeito.
Paulo Calado
SAP Business One Forums Team -
Idea Place p/ Nota Fiscal Eletrônica
Pessoal,
a SAP criou um Idea Place* para Nota Fiscal Eletrônica.
O link é https://cw.sdn.sap.com/cw/community/ideas/businessanalytics/sap_nota_fiscal_eletronica_ (vide abaixo).
Agora, é possível registrar idéias que vocês achem interessantes sobre o cenário de Nota Fiscal Eletrônica nas soluções SAP (seja no ERP ou no GRC). Esse repositório de idéias vai ser constantemente monitorado pelo time de desenvolvimento da SAP e as idéias que tiverem mais votos e/ou tiverem mais apelo serão consideradas no backlog dos produtos e eventualmente implementadas.
Aconselho a todos os clientes e parceiros que interagem e conhecem o processo de Nota Fiscal Eletrônica no SAP a acessarem o Idea Place e, se nao incluírem novas idéias, ao menos votarem nas que acham mais relevantes. Com base nas quantidades de votos, o time de desenvolvimento vai priorizar as idéias mais populares/requisitadas.
Abraços,
Henrique.
Pra quem não o conhece, o Idea Place é um local para sugestão de novas funcionalidades e/ou melhorias para as soluções SAP. O link inicial é https://cw.sdn.sap.com/cw/community/ideas, e lá vocês podem visualizar as dezenas de sessões existentes.
Edited by: Henrique Pinto on Dec 12, 2011 3:53 AMPessoal,
o Idea Place de NFE foi mudado de local para refletir melhor o perfil da solução (nao tinha nada a ver com Business Analytics).
A nova URL é https://cw.sdn.sap.com/cw/community/ideas/brazil/nfe.
Abs,
Henrique. -
RFC problem: could not get functionname from XML requst (sic)
I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan GrahamThanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan -
GRC-NFe - Erro de assinatura de notas
Amigos,
Estou com o seguinte problema.
A nota fiscal sai do ERP e chega no GRC, ficando com o seguinte status:
status de erro = 20 Serviço de assinatura digital não acessível.
Ao reinicializar a nota pelo o GRC está aparecendo a mensagem Erro na chamada RFC (NF-e 3509076119009600019255.
Já verifiquei as conexões rfc e estão todos ok. O PI e o GRC estão instalados na mesma máquina, PI = 001 e GRC = 500.
client 001
SM59 rfc do tipo H -> XI_INTEGRATION_SERVER
host euroXX porta 8001
pref/caminh /sap/xi/engine?type=entry
mandante 001
user piappluser
SXMB_ADM ->Configure Integration Server-> HUB servidor de integração
dest://XI_INTEGRATION_SERVER
client 500
SXMB_ADM -> Configure Integration Server-> LOC sistema de aplicação
dest://XI_INTEGRATION_SERVER
SM59 rfc do tipo H ->NW1CLNT500
host euroXX porta 8001
pref/caminh /sap/xi/engine?type=entry
mandante 500
user pisuperr
Esta rfc é utilizada dentro do Cenário SIGNN_WebAS_Outbound_SignNFe, para o communication channel WAS_XI_RCV
do tipo XI, com Addressing Type HTTP Destination e HTTP Destionation = NW1CLNT500
Alguém tem alguma dica do que pode estar errado?
Abraços,
Cláudio ArgoloBom dia Claudio,
status de erro = 20 Serviço de assinatura digital não acessível.
Veja estas duas threads:
Status error 20 - Signature Service Unreachable
'Signature Service Unreachable' error in the NFE system
Ao reinicializar a nota pelo o GRC está aparecendo a mensagem Erro na chamada RFC (NF-e 3509076119009600019255.
Este chamada de RFC é ao R/3 e não internamente, quando acontece um problema de assinatura, o GRC não tem como reiniciar, pois não tem todos os dados para enviar para o assinador, então é necessário pedir ao R/3 para reenviar.
- Talvez esteja faltando uma nota no R/3. Veja se a SAP Note 1234054 foi aplicada (passos manuais para tornar a função J_1B_NFE_MS_REQUESTS_DATA RFC)
- Se for nota em paralelo esquece. O R/3 também não tem mais estes dados.
Atenciosamente,
Fernando Da Rós
Edited by: Fernando Ros on Jul 28, 2009 8:52 PM -
Error: Copy sender from payload: Sender not in payload
Hi all.
I generated a new WSDL with XI. when i posted it with XML Spy in SXI_MONITOR got this error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy sender from payload: Sender not in payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Copy sender from payload: Sender not in payload</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
WSDL could be wrong?
Rgds
RPHi,
it's not a WSLD error it's IDOC
have a look at my answer here:
Re: Error: Sender Not in Payload
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Encrypt data send from a non-SAP system to ECC.
Hi,
We are tryign to encrypt the credit card details send from web (non-sap system) via a xml file to ECC.
From Basis side, I have exported the public key from the ECC for the web server to encrypt the CC details while sending via xml.
The external web consultants encrypted the cc detail with the public key and send it via xml but that was not able to decrypt at the ECC side.
The developers were using the FM 'CCARD_DEVELOPE'at ECC to decrypt the data in the xml file. It was saying SSF error: No data transfered.
Meanwhile SAP CryptoLib is installed and credit card encryption/decryption is working fine for CC details entered via GUI interface.
Is there anything I am missing out here to encrypt CC details send from a Non-SAP system to ECC.? Do we need to load the SAP cryptolib in the non-SAP system to ecrypt this data at the senders end. Or is there a alternate solution for this ?
We are in ECC6.0/RHEL/Oracle10204.
Appreciate your help.
ThanksHi Nelis,
Thanks for your reply.
This note does not get any information regarding encrypting data from a non-SAP system to SAp system.
I am looking setup/information for encrypting data from a non-SAP system to SAP system.
Thanks -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
Using ale u can send from sap to sap and sap to non sap systems
hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDIHello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:) -
I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.
I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7
Maybe you are looking for
-
My IMac is filled with movies but I have none
I have no movies on my computer at all, and I do not know what files are considered "movies" . I was also wondering how to get rid of the files to clear up the space.
-
Network times out on Power Mac
My G4 Power Mac (running 10.4) can load many web pages ok, but if there is a large file or a sustained download, such as streaming video, it will stop downloading and time out. I can open a new Safari page and start over, no problem. Same thing for f
-
IPod to iTunes transferring *from different account*
Okay so i ran out of money on my itunes account so i used my moms to get Scheibe by Lady GaGa, i downloaded it on my ipod touch. I need to transfer it to my computer but it wont let me. I tried authorizing my itunes with her account and signing in on
-
Trying to recover songs..need some help
I reinstalled Mac OS X and so my iTunes 7 was reinstalled and all my music is gone. I plugged in my iPod Nano (remastered, which requires iTunes7), so I plugged it in and iTunes 7 appeared. On iTunes 7, it didn't show the songs I have on my iPod, but
-
Do they support VBR (Variable Bit Rates) such as "Rather than ripping music in 28 or 92 KB/s, which some people feel does not offer true CD quality, or ripping at 320 KB/s, which is huge, ripping in VBR, or Variable Bitrate, offers the best combinati