Note 1123505 cannot be implemented
Hi Experts,
I got the following error message:
OTF end command // missing in OTF data
while calling the function module:CONVERT_OTF
call function 'CONVERT_OTF'
exporting
format = 'PDF'
importing
bin_filesize = pdf_size
bin_file = pdf_data
tables
otf = lt_otfdata[]
lines = l_dummy
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
I got the note from SAP 1123505 but when I applied it says: "Cannot be implemented"
Could you please help?
Thanks!
- Anthony-
Hi,
Check the version and support package level of your SAP BASIS component. If the version is not specified
in the SAP Note 1123505, you will not be able to implement the SAP Note.
Regards,
Vinod
Similar Messages
-
SAP Note Nr. 1810084 cannot be implemented
I have downloaded the SAP Note Nr. 1810084 but it systems says "Cannot be implemented".
I referred instructions given in following link.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138353739393226
This is to enable the BPC related Infocube data retrieval through Bex Analyzer
Please guide me on this.
Regards,
SisiraHi ,
SAP note 1810084 - SAPBWNews NW BW 7.30 ABAP SP10
This note contains the SAPBWNews for ABAP Support Package 10 for BW release 7.3
It provides a list of all notes describing the corrections or enhancements in Support Package 10.This note will be updated when other notes are added.
To customers who power their BW with SAP HANA, SAP strongly recommends to apply the latest available SAP HANA revision.
AS there is no correction instruction in this note, this cannot be implemented using SNOTE.
You need to refer to all the SAP notes mentioned in this note and apply relevant notes.
Hope this helps.
Regards,
Deepak Kori -
I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks -
Snote 717452 having the status of "cannot be implemented"
Dear all...
While implementing Snote 717452 having the status of "cannot be implemented".
is there any solution for this..
Thanks,Also... it might not apply to your system or simply your SP level already cover the note...
Read the note details
Regards
Juan -
ORA-20211: Active job does not exist, cannot link to job record.
Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert commentsHi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos -
I bought a new 4th gen ipod shuffle and tried to sdet it up last night. I installed the latest itunes software and started to sync my ipod, but error boxes kept popping up saying ipod not found cannot sync. It was showing in itunes, then it would disappear, then it would come back. I am not very good with computers so I don't know what to do. Can someone help?
Do you have an iCloud backup? If you backed up your old phone to iCloud you can go to Settings>General>Reset>Erast All Content & Settings (which will erase your phone), then go back through the setup screens again and when prompted choose Restore From iCloud Backup. However your backup won't contain everything in your iTunes library (such as your music) so you'll need to be able to sync with your computer unless you purchased everything from iTunes and want to redownload it to your phone.
-
Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy -
Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod
razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version. -
Error in file receiver adapter (Directory does not exist / cannot be create
I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK -
My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data
Can anyone help meSyncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
All media content will be erased during the first sync, but you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
I have ipad mini, safari is not loading, cannot open page because server stopped responding??? help
i did bills paid!!! lol just noticed cannot connect to app store either!!
-
Hi, I have received about 15 email messages a day from " Mail Administrator - Mail System Error Returned Mail" that emails I have not generated, cannot be delivered as the destination computer cannot be found! These emails are in a foreign language, appears to be russian, and I have no clue who/what generates them. It was suggested to me that it could be a virus. I have done three scans and so far nothing malicious has been found. Does anyone know how I can fix/stop these?
Thank you
ChrysiIf this is someone else's windows machine, infected, and with your contact information in their contacts, then there is little if anything you can do. Windows machines can often become infected by mail bots that randomly send mail from the infected computer to people in the contact's database, AND using email addresses found in those contacts to spoof the "from" field in the outgoing mail. When those messages fail, the receiving server bounces them back to you as your email was in the "from" address field.
The only solution would be to disinfect the infected computer, but since you have no idea who (amongst all those with your contact information) is the actual infected computer, you cannot really do anything. -
Package javax.servlet does not exists - Cannot resolve symbol
Hello,
I am using JDK 1.3.1.06 version. I wanted to compile a simple servlet using this. But I am getting plenty of errors for all javax package. Why it is not able to find javax package classes?
The following is the program I have tried to compile.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class TestServlet extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
process(request, response);
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
process(request, response);
private void process(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
PrintWriter out = response.getWriter();
out.println("Hello World !");
I am getting errors like this :
Package javax.servlet does not exists.
cannot resolve symbol
symbol : class HttpServlet
Please advice me some solutions fast.
Thanking you,
ForumAns.javax.servlet doesn't come with the standard jdk. It's part of J2EE.
If you have tomcat, you can use the server.jar that comes with tomcat.
Or you can just download J2EE sdk instead.
I am getting errors like this :
Package javax.servlet does not exists.
cannot resolve symbol
symbol : class HttpServlet -
Filled out pdf form, did not save, cannot locate
filled out pdf form, did not save, cannot locate
Hi angel07h,
Did you try to save the file, but the save was unsuccessful? Or did you just not have a chance to save the file? Where did you get the form? Did you download it from a website, or fill it out directly on a website?
I look forward to hearing back from you.
Best,
Sara -
I am attempting to downgrade from 5.1.3.N1.1 to 5.0.3.N2.2b for standards compliance.
When following the ISSU steps for validation of the install all command I receive the following error on the following command:
sh install all impact kickstart bootflash:n5000-uk9-kickstart.5.0.3.N2.2b.bin system bootflash:n5000-uk9.5.0.3.N2.2b.bin
Verifying image bootflash:/n5000-uk9-kickstart.5.0.3.N2.2b.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n5000-uk9.5.0.3.N2.2b.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n5000-uk9.5.0.3.N2.2b.bin.
[# ] 0% -- FAIL. Return code 0x404F0003 (SRG file not present/cannot be opened).
I followed some recommendations from this post https://supportforums.cisco.com/thread/2108814
reload to clear temp and cache
show system internal flash
checked md5sum of image
I found this information http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/deferral/Deferral_Advisory_Notice_N5K.html
I am unsure of how to upgrade when the steps to validate indicate a problem with the upgrade/downgrade.
I still receive the error.
Any help would be greatly appreciated.
Attached are the steps done so far and outputs.I had already created a case with our reseller. The engineer there had me reload the 5ks and attempt the show install all impact again. When I did it was successful.
I was able to then downgrade to 5.0.3.N2.2b. I am currently working to duplicate the issue by going back to 5.1.3.N1.1.
The engineer also stated that I was probably running into this bug:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw25835
Here is the contents of the sh system internal flash and show system internal dir /var/tmp:
Mount-on 1K-blocks Used Available Use% Filesystem
/ 409600 72564 337036 18 /dev/root
/proc 0 0 0 0 proc
/post 2048 4 2044 1 none
/var 409600 72564 337036 18 none
/sys 0 0 0 0 none
/isan 1536000 409628 1126372 27 none
/var/tmp 307200 72 307128 1 none
/var/sysmgr 1024000 0 1024000 0 none
/var/sysmgr/ftp 409600 68 409532 1 none
/var/sysmgr/ftp/cores 102400 0 102400 0 none
/callhome 61440 0 61440 0 none
/dev/shm 524288 126552 397736 25 none
/volatile 153600 0 153600 0 none
/debug 20480 0 20480 0 none
/dev/mqueue 0 0 0 0 none
/debugfs 0 0 0 0 nodev
/mnt/plog 49024 1300 47724 3 /dev/mtdblock2
/mnt/cfg/0 114909 4274 104702 4 /dev/sda5
/mnt/cfg/1 112920 4274 102816 4 /dev/sda6
/var/sysmgr/startup-cfg 409600 2104 407496 1 none
/dev/pts 0 0 0 0 devpts
/mnt/pss 114917 5923 103060 6 /dev/sda4
/bootflash 1609984 779460 748740 52 /dev/sda3
./ 640
../ 240
bootloader_ver 0
util_cli_history_admin 48
mysrg 1664
mcm_ascii.log 1019
m2rib_ascii.3248 68
arping 101
stp.log.1 3836
fwm1.out 0
cmp_slot_id.1 0
ntpd_1 0
ntp_client_1 0
ntp__libdapi.log 0
igmp_restart.log 0
radius_debug.log 232
cfs_mac.log 166
climib.log 1416
lcc.log 694
security_stderr 77
security_stdout 0
aaa_debug.log 519
security_debug.log 647
evmc.3005 31
idehsd.log 602
mvsh.3000 0
lockcisco 0
.flexlm/ 60
logs@ 20
first_setup.log 2981
boot_uptime.log 56
vsh/ 40
Maybe you are looking for
-
Help with exporting DB Shema as backup
Can someone please tell me how to backup a DB shema and restore it via Export/Import! Can I restore a db shema from dmp file in another oracleDB? Is there any script on the internet whitch I could use? Any help would be greatly apriciated! Thanx!
-
I have an external hard drive. How do i put stuff on it?
Yes i have an external hard drive a iomega. I have stuff already on it , from when i used to have windows. I have tried to put some files onto it but it wont accept. I tried doing it through the Time machine option but it is saying it will wipe out a
-
USD and USDN currency invoices payment through F110
Hi all, Invoices are posted in both USDN and USD in our system. I am able to process payment in USD in T code F-58, for invoices created in both currency USDN and USD. But in F110, USDN invoices are not included in the proposal due to the error "No v
-
Hi experts, I am in JDBC to IDOC scenario and right now i face following error in SXI_MONITOR (black and white flag in status field BUT Red flag in outbound status): "Message has error status on outbound side" This is a heavy interface (up to 8MB) bu
-
Swf stops part way through in browser
my swf stops part way through when in the browser always at the same frame...in flash it plays fine...here's a link to the web page... http://www.karlyoder.com/wiredchemi...r_symmetry.html and here's a link to the fla (it was too big to attach)... ht