Note 1599687 - New Model 111 for tax reporting

Hola Buenas tardes,
Estamos aplicando la SAP Note 1599687 pero hace falta en el PDF Manual_post_implem_steps_1599687.pdf los textos:
- Campo S_GEN111.
Podeis decir a Desarrollo,
Saludos,
Jorogape

Buenas tardes,
Hemos actualizado la nota 1599687 con el paso manual que estaba faltando.
Muchas gracias por avisar,
Carlos.

Similar Messages

Create or not a new table just for one report

hi guys,
I'm working on a java client server application with an oracle db.
I need to create a new report in my application with requires lots of
calculation out of a table. I mean I cannot obtain the report just using
sql query.
My solution is:
use an oracle procedure, create a new table, fill it and then use sql to
get the report data. (that is fastest solution in my opinion)
My question is:
is a good choice to create a new table that will be exploit just to create
a report in the application?Or it's not worth and I should process the data with java without creating a new table?
thanks in advance!

Hi,
>>is a good choice to create a new table that will be exploit just to create
a report in the application?
No problem, but in your case create a global temporary table is more appropriate, because many users can generate a report on the same time and you don't need worry about what table data is for what user, or to do something like create some tables with randomizes names like TEMP010304 or TEMP386679 and drop them when the user finish to view the report ...
http://www.oracle-base.com/articles/8i/TemporaryTables.php
Cheers

Table ES340_OPEKEY for Model 340 - Spain Tax report

Dear All,
This is with regard to Model 340 tax requirement for Spain. As we all know that there are notes already released for this change, but due to lower support pack level in our system we are develpoing new program for model 340 spain tax report.
As we know that table 340_Operation key filter data of the report. Does any one have any information about this table. Mostly about the logic on the base of which data can filtered and displayed in that report.
I also have one query on the way data get displayed in model 340. Does any know what should be displayed in this report. I mean other then input and output tax line item, what else should be displayed in the report? For e.g. If I have one document posted as shown below.
Dr....Vendor Account                  200075              E2 Tax code     1000.00
Cr....Material GL Account            4631000            E2 Tax code     925.92
Cr....Output Tax GL Account       2013000            E2 Tax code     64.82
Cr....Clearing tax GL Account      4306000            E2 Tax code     9.26
E2 tax code is set against MWS (Output tax) and ASB(Clearing tax) account key
Now under table ES340_OPEKEY If i select VAT Code 'Yes', IGIC 'NO' and Operation Key as 'None' then under Model 340 report only line item will be displayed.
Total Base Amount: 925.92
Total Tax: 74.08
Total Invoice: 1000
And if under that table If i select VAT Code 'No' IGIC 'No' and Operation Key as 'None' then three line item get displayed.
Total Base Amount: 925.92
Total Tax: 64.82
Total Invoice: 990.74
I want to understand what would be correct output for this document?
Please guide.
Regards.
Vishal.

Hola Eduardo!
La clave de operacion ya está parametrizada en la tabla ES340_OPRKEY.Este no es el problema.
Lo que necesitamos es poder incluir dos Tipos de libros .
El estándar de sap solo saca dos tipos de libros
Libro de facturas expedidas.
Libro de facturas recibidas.
que están identificados en el reporte con las claves de tipo de libro E y R.
Necesitamos que el reporte obtenga tambien los libros de
Libro de determinadas operaciones intracomunitarias.
Libro de bienes de inversión.
Cuyas claves de tipo de libro son: U y S
Estas claves No tienen nada que ver con la clave de operacion.
Este es un requerimiento a la hora de presentar el reporte y SAP no aporta solucion.

Not yet solve....TAX Report regarding (client)question

Client asked to me in interview, please give me answer
This is regarding US PAYROLL
1 Transaction PU19 Reports for tax reporting/Tax Returns / Files for State Unemployment Reporting on CD or Diskette :-
We have issues on some reports regarding address, page numbers and totals. Alex worked on it and told that we need to contact SAP         for help as he thinks problem is with SAP Forms itself. Currently typing manual returns pending changes to forms.
2 Deposits on 941 form:-
   Can we update the form to include tax deposits made on the 941 line for deposits?
3 State Tax Returns not configured in SAP:-
   Can we have state tax returns configured in the PDF format also?
4 Printing of W-2:-
Need to be able to print W-2s so we can fold/seal so address apprears on outside for mailing. Duplex or 11/14 form? Our folder/sealer uses pressure seal self sealing forms.
5 Documentation of Processes (Benefit and Garnishment):-
6 Configure benefit changes for 2009:-
7 Update benefit tables / rates for 2009:-
8 'Update SUT rates for new year:-
9 New 401k Limits Entered :-
Documentation how to do this
10 W-2 Reporting, Non Taxable Relocation, Personal Use of Company car (Box 12 and 14 items) for W-2 Reporting:-
11 Deceased Employee Payments:-
How do we handle so W-2 is correct and any 1099 items handled correctly
12 'Mag Media File - Federal (annual):-
'RS record missing from Magnetic Media file. Can this be included in the Federal Mag Media file? Kathy has sent some changes that need to be made to Frank.
13 'State Mag Media Files and State annual returns:-
Have some states that we must file by diskette file. Can we also have annual state tax returns configured in the PDF format?
14 Federal 940 Return:-
Make sure this form is configured correctly
15 Pension Plan Indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
16 Third Party Sick Pay indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
17 Retirement Calculation:-
18 Year end close procedure:-
What all has to be done before we can close the year and print W-2's. Do we have to do any zeroing of wages, taxes and deductions before the first check of the new year can happen?
19 Sort order for W-2 printing:-
20 941 Correction Form (941C):-
Need training on how this is handled
21 'W-2 correction form (W-2C):-
Need training on how this is handled
22 'Payments received in January that affect prior year W-2:-
'How do we handle. We receive info in January that must be included on the prior year W-2. Want to be able to include on original W-2 without filing a W-2C. (Third Party Sick Pay, Payments made in Mexico, Germany, etc) Usually don't receive.
Regards

Aswin,
The client session is your primary TopLink interface abstracting over the shared cache and connection pooling. Depending if you are using internal or external connection pooling and the transaction state you are in TopLink may have a JDBC connection allocated to your client session. A client session does equate to a single dedicated JDBC connection for its entire lifecycle.
Assuming you are using an external connection pool (Application server's data source) your client session will have a connection from this data source when required to perform a read and during the commit of its UnitOfWork.
Doug

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

Is the new model number for iPad MC706B? What was the model number for iPad 2?

Is the new model number for ipad MC706B? What was the model number for ipad 2?

iPad 2 Model No: A1395, A1396, A1397
iPad 3 Model No: A1403, A1430, A1416,
iPad 4(current model) Model No: A1458, A1459, A1460
You can learn about serial numbers, model no's about iPad, iPhone, iPod and Mac from: http://www.everymac.com/ultimate-mac-lookup/

Create a new condition type for tax... and assign in the Tax determniation

Hi,
I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
i need to add that in Sales order and need to maunally populate that in the sales order.
could anybody suggest to create a new condition type for tax.(full process).
Thanks
shankar

Hi,
Goto the T.Code "V/06".Create one new "Z" condition type.
Maintain the Condition Class as "D(Taxes)".
Calculation type as "A(percentage)".
Cond. Category as "D(Tax)".
Select the tick mark for "Group Condition" if it is applicable for you.
In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
Now this condition type will appeared in your sales order after maintain teh condition records.
Regards,
Krishna.

Sales Order Unable to Use New Condition Tables for Tax Condition Type

Dear All,
I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
I wonder if anyone encountered the same problem as me.
Kindly advise.
Thank you.
Regards,
Yvonne

Hi
Yvonne
I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
Secondly for tax purposes I suggest Try to have Customer and material tax classification approach this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
This information can be passed on to FI using Different Tax code for Different combination.
I hope this helps
Regards
Mandar

Request for the creation of a new Unemployment account for tax

Hi Guys,
This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
Thanks,
Subbaiah

Subbaiah,
Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
Once this is done, youu2019ll need to update BSI.
If Tennessee is a new state, youu2019ll have work to do with the tax models.
Regards,
Howard

Substitution for Tax reporting date

Hi,
I have created a substitution at document header level to change Tax Reporting date field.
It works correctly when I enter a fixed value or another field value, but when I enter a user exit it does not work in VF11 transaction
Which could be the problem?
Thanks

Dear expert
Problems calculating tax reporting date in VF11 transaction
user exit VF11 for accounting
Regards
Ajeesh.s

To add new field in withholding tax report

Hi Experts,
I have a requirement to add pan no. field in withholding tax reporting in Tax per business Partner.
Can somebody help me how to do it with BADI or User exit.
Thanks in advance
Rahul
Moderator Message: Do some work of your own first. Do not expect others to do your entire work for you
Edited by: kishan P on Oct 28, 2010 10:17 AM

Hi Dheeraj Late,
MESSAGE_TYPE_X is likely kernel problem.
want to update your kernel level up to latest version.
will solve most cases.
Regards,
Padma.

Editing new crystal layouts for financial reports in 8.8

After upgrading to 8.8 PL10 I decided to investigate the new financial layouts for Crystal. When I opened the layout however I couldn't make much sense of how it is structured or even functions, it seems to reference a PLD table that I couldn't find under tables, views, or stored procedures. Any advice on how to better manipulate this report would be great.
They are all structured similarly so lets use the new balance sheet as a reference.
-John-Michael

Hello!
Here are my findings ...
- The new Crystal Reports Layouts base deeply on the "old" PLD Layouts.
- The table "PLD__ITEMS" is an XML-file with the data of the report.
- If you want to show same additional fields of PLD__ITEMS on the report, it is not enough to drag the field on the report. You also have to format the field and add additional info to the CSS-Class like: FileName="OINV";FieldNum="CardName";
The workflow I used to edit the new CR Layouts:
1. Edit the old PLD Layout as needed
2. Use the Crystal Reports Converter to get a CR from the PLD [Download|/docs/DOC-8768#section16 [original link is broken]]
(The PDF included gives some basic hints about the structure of the CR Layout)
3. Edit the SAP CR with the informations of the converted CR (from PLD)
Hope this helps a bit ...
Martin Samlaus

Add Vendor Name to S_ALR_87012357 (adv.return for Tax report)

Hi All,
Could anyone help how can I add "Vendor Name" to the Output List of S_ALR_87012357 ("advance return for Tax on sales" report)
Thank you and Regards,
Orly

Hi,
please go to Output section of report
now click on confiure in front of Input tax line as below
Now here you have business partner field which will give you vendor name and you have name field as well.
Many Thanks

New Smart form for Tax calculation

Dear Consultants,
I am new for ABAP module, I want to create one smart form, for tax calculation. As per the attachment Most of the fields are standard, only the value I want to pick from Different Infotypes and RT table. please suggest how to create smart form.
Thanks & Regards,
Naresh

Hi,
create a executable program, pass the all values to Internal table.
create the structure as same as internal table.(eg: ztable).
create table type for this structure(eg: ytable)
T-code: Smartforms.
click the Form Interface tab, click table . click table
in that declare the variable (itab like ytable).
click the form Painter,
desgin the output structure.
Select "Fieldlist on/FF''.
drag and drop the fields
Right click on the main window create a Window -> right click on create window -> click table.ble
add vertical lines to the table.
Right click on the mainwindow->flowlogic->loop. enter the itab name.
activate the smartforms. execute.
copy the generated number.
goto to abap editor program.
Delcare:
DATA : FM_NAME TYPE RS38L_FNAM.
CONSTANTS C_FORMNAME TYPE TDSFNAME VALUE 'ZSMARTFORM4'. (smartforms name)
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
                 EXPORTING
                   formname                 = c_formname
*                 VARIANT                  = ' '
*                 DIRECT_CALL              = ' '
                IMPORTING
                  FM_NAME                  = fm_name
*               EXCEPTIONS
goto to pattern paste the number and execute.
comment the number and add fm_name.
execute.
Regards,
Venkat.

Iphone will not show new message alert for email sent to subfolders

I have successfully synced my iphone with the exchange server so I am getting push email from entourage to my phone. However I have subfolders set up in entourage so that my email is organised. These subfolders are showing on my iphone. Although email sent to subfolders is pushed to the iphone (to the relevant subfolders), when the phone is on the home screen it does not show a new mail alert for those emails. It only shows a new mail alert for emails going to the main inbox. Obviously I need it to alert me if email is coming in to subfolders. Can anyone help with setting this up?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Note 1599687 - New Model 111 for tax reporting

Similar Messages

Maybe you are looking for