Note 1681589: Missing entry in search help of RPUTMSE0 report

Hola Buena tardes,
Estamos aplicando la Note 1681589: Missing entry in search help of RPUTMSE0 report; En la version 4.7 hace referencia a un valor que no existe.
Table: T52B5
TMS1 RPUTMSE004 TOA C111E0
Puede ser que el valor correcto es: sobra un número "1"
Table: T52B5
TMS1 RPUTMSE004 TOA C11E0
Saludos,
Jorogape

Hola,
En la vista V_T52B4 la encuentro como:
TOA C111E0 Modelo 111 - Impuesto sobre la renta PF
Saludos,
Carlos.

Similar Messages

How to add search help to a report.

How to add search help to a report.

Hi
It can use the event AT SELECTION-SCREEN ON VALUE REQUEST:
PARAMETERS: P_FIELD LIKE ....
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FIELD.
* Here it needs to insert the abap code to call the search help,
* for example it can call fm F4IF_FIELD_VALUE_REQUEST
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
           TABNAME        = SPACE
            SEARCHHELP = <SEARCH HELP>
            DYNPPROG     = SY-REPID
            DYNPNR          = SY-DYNNR
            DYNPROFIELD = 'P_FIELD'.
Max

Choose an entry in Search help and not in its input field

Hi to all,
In my application I have a field with a search help.
I want that this field only can be modified using a search help and this field can't be modified directly writing in this field.
Is similar to transaction se63 - Translation - Abap objects - Short texts - OTR - Source language
I have created an example with the field SCARR-CARRID but this field can be modified with search help and directly, or this field can't be modified.
In my application I have done the following:
-> Screen painter (layout):
Name: SCARR-CARRID
Input Field: not marked
Output Field: marked
Possible entries: marked
Possible entries keys: 2
-> Flow logic:
PROCESS BEFORE OUTPUT.
MODULE IMPORT_DATA_0001.
PROCESS AFTER INPUT.
MODULE EXPORT_DATA_0001.
PROCESS ON VALUE-REQUEST.
FIELD SCARR-CARRID MODULE listbox.
PROCESS ON HELP-REQUEST.
MODULE listbox INPUT.
TYPES:
BEGIN OF VRM_VALUE,
KEY(40) TYPE C,
TEXT(80) TYPE C,
END OF VRM_VALUE,
VRM_VALUES TYPE VRM_VALUE OCCURS 0,
VRM_ID TYPE VRM_VALUE-TEXT,
VRM_IDS TYPE VRM_ID OCCURS 0.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
CHECK list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid CARRNAME FROM SCARR
INTO (value-key,value-text).
APPEND value TO list.
ENDSELECT.
SORT list BY text.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
ENDMODULE. " LISTBOX INPUT
How can i solve this problem?
Thanks a lot.

Hi Jey:
I have tried this:
MODULE listbox INPUT.
TYPES: BEGIN OF vrm_value,
           key(40) TYPE c,
           text(80) TYPE c,
         END OF vrm_value,
vrm_values TYPE TABLE OF vrm_value,
vrm_id     TYPE vrm_value-text,
vrm_ids    TYPE TABLE OF vrm_id.
DATA: name       TYPE vrm_id,
        list       TYPE TABLE OF vrm_value WITH HEADER LINE,
        poplist    TYPE TABLE OF spopli WITH HEADER LINE,
        popanswer TYPE c,
        popindex   TYPE i,
        value      TYPE vrm_value,
        lt_dyntab TYPE TABLE OF dynpread WITH HEADER LINE,
        dynpprog   TYPE syrepid VALUE 'SAPMZxxxx',           "Enter your dynpro here
        dynpnr     TYPE sydynnr VALUE '0100',          "Enter your screen number here
        dynpfield TYPE help_info-dynprofld VALUE 'SCARR-CARRID'.
IF list[] IS INITIAL.
    name = 'SCARR-CARRID'.
    SELECT carrid carrname FROM scarr
    INTO (value-key,value-text).
      APPEND value TO list.
      poplist-varoption = value-text.
      APPEND poplist.
    ENDSELECT.
ENDIF.
Use some method to display a list for selection
Here is a simplified way of doing it but there are
much more sofisiticated methods.
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
       EXPORTING
            textline1          = 'Select an entry'
            titel              = 'Selection'
       IMPORTING
            answer             = popanswer
       TABLES
            t_spopli           = poplist
       EXCEPTIONS
            not_enough_answers = 1
            too_much_answers   = 2
            too_much_marks     = 3
            OTHERS             = 4.
CHECK sy-subrc = 0.
CHECK popanswer NE 'A'.
popindex = popanswer.
READ TABLE list INDEX popindex.
IF sy-subrc = 0.
    lt_dyntab-fieldvalue = list-key.
ENDIF.
Update the screen field with the selected value
lt_dyntab-fieldname = dynpfield.
APPEND lt_dyntab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            dyname               = dynpprog
            dynumb               = dynpnr
       TABLES
            dynpfields           = lt_dyntab
       EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            undefind_error       = 7
            OTHERS               = 8.
ENDMODULE. " LISTBOX INPUT
I think that there is a error that I have not seen because I put a breakpoint at the beginning of your code and the execution doesn`t stop.
Now I execute the dynpro and appears my field 'SCARR-CARRID' and I can't choose a value and I can write in input field.
Can you help me?
Thanks a lot.

How to delete entries from search help for a field

hi guys
how r u all doing.
i have some questions for u.
1. How can i delete some entries(from a list of many) from search help of a field with out (writing)going to a program.
2.in PA10 (Personnel File),when i try to display data for a pernr,i am getting an error saying that infotype 122 doesnot exist.
3.Again in Pa20,when i try to display data for a custom infotype,it leads me to short dump saying that load program does not exist.
any help in this regard,wud be appreciated.
thanks

Follow this
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Help view to get two table entries in search help

Hi,
I have created the help view for join two tables and that help view was called in the selection method for creating search help of the custom table field. since it has show inthe selection screen , it is fetching only one table entries. and the shown entries are displaying but not passing.
Please provide the steps to get the two table entries and the displayed entries should pass.
Thanks in Advance,
siva

Hi sivanag,
1. Try your view with SE16/SE16N to see if it really finds what you expect
2. Use the same data elements in help view as on selection screen
3. read documentation and F1 help on all fields you see in the search help definition - especially only field marked as EXPORT parameter will be put back on screen.
But, sincerely, I don't know what your selection-screen looks like.
Regards,
Clemens

Needs to modify entries in search help

Hello friends,
I need to modify some entries in the search help for materials (MATNR). I have found that search help MAT1 is used for materials, and when I go inside then I am not able to get the records in the internal table(RECORD_TAB) that displays in the output.
Also the search help exit is standard, so creating a 'Z' exit and replacing in the search may effect other functionality of standard SAP also. So i need to take care of that as well.
Can anyone help me for finding the entries and where i need to modify them.
Regards,
Grover

But I face a problem because RECORD_TAB doesn't fill and data gets in from some other standard program.
I don't understand 'other standard program' - the elementary search help you are referring to does not have an exit, just a view selection. If you add the exit, then you can stop at the 'DISP' callpoint and analyze the data.
Also in that program internal table that contains entries are in a form of string and not with different fields.
Of course, RECORD_TAB is converted at runtime based on the search help definition. This is why you need to used the F4UT_* helper functions to access the data. Better yet, if you overtake the data selection, you'll have your own internal table that you can analyze before mapping it back to RECORD_TAB.

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

Heading texts not appearing correctly in WDA search help

Hello experts,
I am facing a problem in WDA. I have a field(Profile Key) in my WDA application which takes the input search help automatically from the data dictionary. When I execute my application the F4 help is displayed for the field on pressing F4 but the problem is: the heading texts are not appearing properly(instead dots are dispalyed) for few of the fields in the search help's value list. Some observations:
1. heading texts are not properly displayed for columns whose field length is 1 or 2.
2. in DDIC, heading labels are maintained for the logon language
3. same search help works fine in R/3, the problem is only with WDA
How can I solve this problem? Please help with your inputs.
Thanks,
Yuvaraj

The problem can be solved by applying the note no 1100420.
Regards,
Yuvaraj

Missing values in F4-help in web reporting

Hallo everybody,
we have a problem with our F4-value help. When we open this value help in web reporting of bw 7 we only see in the value help a few entries and not all the contents of the master data table. We have checked the infoObject and query settings. Are somewhere in the system a hidden configuration which we haven't checked? The query is 7.x.
Thanks and regards!

Check the properties of your infoobject in advanced tab., in query designer
Currently you can see the values only posted and that is the default option.
If your requirement is to see all the values stored in master data then change the option in your query and as well as in Bex properties tab of your info object.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 1, 2010 7:40 PM

Search help for Acct Assignment not working

Hi,
When I create a PO and go into the account assignment tab at the item level and try to bring up the search help by clicking on the Binoculars , nothing happens. The backend has been upgraded to ERP2005. We are on SRM 5.0
Any thoughts on why this could happen?
Can you shed some light on how I could investigate this issue.
Your help is appreciated.
Joe

Hi
This is a bug in the System. Are you talking of customer fields / standard fields - search help ?
You need to raise an OSS message with SAP on this.
Meanwhile, try these SAP OSS notes.
<u>Note 739509 BBPPO01: SEARCH FOR ACCOUNT ASSIGNMENT CATEGORY DOESN'T WORK
Note 746788 - Back-end system search help for cost center
Note 656633 - Search help requires dialog users
Note 907016 - Error when you select search help</u>
Also ensure, proper authorization objects are provided by BASIS team.
Let me know incase you need any assistance.
Regards
- Atul

Search Help Error while Publishing Query in Explorer

Hi All,
We have upgraded BW from version 3.1 to BI 7.0. SP level is 15. When we publish query in Explorer, selection screen appears, we get error in selecting variable(Fiscal Year/Period) entries from search help. After selecting a value from a list of possible entries, the format is changed on the screen.
For example:
If we select 002.2002 for variable FiscalYear/Period, we get
002 02 i.e. it is truncating 20 from 2002.
Now, we have to manually enter the values.
While executing query in BEx analyser, no such error occurs.
What will be the solution?
Regards,

887188 wrote:
Hi,
I have added the below query in the EBS dataset to retrieve only unique applications as APPLICATION_NAME column has some duplicate data. I imported data to DB.
select distinct(APPLICATION_NAME) as NAME from APPLICATIONIs there any table in OIM schema which you have named APPLICATION? AFAIK, applications from EBS are imported into Lookups in OIM and you will have to query lookup to get the Application name in OIM.
But, when I try to filter on application I get below error
Internal Exception: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
Error Code: 936
Call: select distinct(APPLICATION_NAME) as NAME from APPLICATION WHERE UPPER ( DISTINCT(APPLICATION_NAME) ) like UPPER('%%') The UPPER ( DISTINCT(APPLICATION_NAME) ) like UPPER('%%') clause here is wrong. What are you trying to achieve through this query?
>
>
-Bikash

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Attaching search help to SCREEN FIELDS AND TABLE FIELDS

Hello experts,
Himanshu here.
Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
Please reply at the earliest,as we have some deliverables to be met
Thanks

Hi,
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
regards,
veeresh.

Search Help MAT1A

I need to add two new fields ie.EAN11 & NORMT in MAT1A search help.
Collective search help : MAT1_A.
Elementary Search help : MAT1A.
I have updated the View M_MAT1A with these 2 new fields.and also added the fields in the search help parameters of MAT1A.
When i go to va02 and go into material in 'all items' and press F4, then it will show new fields(EAN11 & NORMT), but when i press enter, The F4 entries does not consist any data for these 2 fields.
How do it fetch data?

Can you check whether there are any entries in view you have changed?
Have you made an entry in search help for these field to display in F4 (List position)
Regds
Manohar

Help regarding search help

hi,
i want to know the functionality with example on "search help".
how r they useful?....how r they created??...and how to use them in dialog program??
thanks

Hi Kunal,
There are 3 ways:
1)In the PAI of the screen, add a module Process on value request. For example:
PROCESS AFTER INPUT.
MODULE USER_COMMAND_100.
PROCESS ON VALUE-REQUEST.
FIELD field_name MODULE value_request_for_field_name.
*field_name is the field for which you require search help.
In the Module value_request_for_field_name call this function 'F4IF_INT_TABLE_VALUE_REQUEST'.
2)The above procedure can be used if the field you have defined doesnt have an existing search help.If it already has search help and the field in the screen is taken from the dictionary,then in the attributes,u can check from from dictionary under the dictionary tab.
3)A manual search help can also be created in the se11 transaction by clicking on the search help radio button and giving the table and field name for which search help is required.
Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Please check this link on how to create search help.
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_basic.htm
1) after creation of search help, you can assign this to database field in change mode of table and double clicking of the field name.
2) in screen field, double click to see the attributes and give your search help there.
Refer this link
http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards

Note 1681589: Missing entry in search help of RPUTMSE0 report

Similar Messages

Maybe you are looking for