Notes (Mac) Crashes during 'Updating' after iCloud Service Interruption

After the recent iCloud service interruption that lasted 24 hours (http://tidbits.com/article/13253 - pfft less than 1% of users affected my a**...) I can no longer open Notes on my MBP without it crashing. Any ideas for how to resolve this issue? I have tried unchecking notes in iCloud settings then reopening the app, then quiting, checking notes, and reopening with no luck, I restarted my mac with no luck, now I have no idea what to do...
To make this a bit clearer:
iCloud Service OutageTried opening Notes; couldn't sync due to outage and crashed repeatedly
iCloud Service Restored
After opening Notes, it undergoes "Updating" and then quits unexpectedly
I have tried unchecking Notes in iCloud prefs with no luck
I have tried restarting my Mac with no luck
Any ideas??? Thanks everyone!

I managed to solve the problem. For anyone having this same problem, it turns out that it was a Microsoft Exchange account that was messing everything up. Removed that account from syncing notes and it works fine now!

Similar Messages

  • Ipod will not restore crashed during update

    ipod crashed on update and will not work. it said to do a restore but I have tryed 2 times and both times the restore didn't work

    I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
    Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

  • HT5527 My icloud apple ID had been disabled after icloud services downgraded my 18Gb documents in the cloud to 5Gb. I can't updated now because when i try to do it i get a message saying that my ID is disabled

    My icloud apple ID had been disabled after icloud services downgraded my 18Gb documents in the cloud to 5Gb. I received an email from icloud services a couple of months after i upgraded my icloud storage (on Sept30th) saying that my billing info was wrong. In fact my credit card was outdated so i updated my credit I can't updated now because when i try to do it i get a message saying that my ID is disabled. Can you help me?? I can't access my docs now...

    See this Apple document for help...
    http://support.apple.com/kb/ts2446

  • TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    worth looking at for the future to understand backing up etc

  • My hp envy want quit saying " do not power down during update" powered down 3 times and still saying

    My hp envy want quit saying " Do not power down during update" powered down 3 already still saying the same thing.

    so my printer worked for a month and then it asked me if i wanted to install updates. It's been installing updates for three weeks and says not to turn off. I've turned it off several times and unplugged it a few times.  No other buttons work on the screen because i can't get to them.  Obviously it's a software problem but i can't find any updates to fix it.  The guy on the help line said it's a hardware problem and that they'd offer me a $95 discount on a newer model, but it would still cost me over $150 and it would be a refurb. So they have a bunch of these printers that sat in a store that didn't sell and passing off printers not in a new box and then talk to me like i should be so thankful they gave me this wonderful discount for a "new" printer that nobody else wanted when i'm still stuck with a printer i paid full price for and should've been able to get replaced. Now i've really paid over $270 for a printer i'm not even sure i want that might have another bug they can't fix.  It's just wrong.  Anybody know a fix for this so i can cancel the order for a new printer i'm not sure i want?
    thanks,

  • Notes App Crashes when Update Teared-off iCloud Notes on iDevices

    This is not a question, but a bug.
    After I tear-off a note (double-clicked the note from the list) from the Notes app with iCloud enabled, and then edit it on iPhone (iOS6.0.1), 2 problem occurred:
    1. The updates will NOT show on the tear-off piece; however, they show on the one on the Notes app screen;
    2. When I try to close the tear-off note (using the usual red cross icon at the upper-left), the Notes app crashes.
    I guess this issue is due to incomplete design of the sync flow of Notes via iCloud. The reason being that when I update the note on Mac with the same note opened on iPhone, the Notes app on iPhone had to force close the note and go back to the notes selection list. I guess the Dev team couldn't figure out a way to dramatically update the opened Note on the fly without "refreshing" it. Probably had to rebuild the Notes app and they gave up?
    A bit disappointed as I helped promoting how useful the iCloud is and keep telling people "it just works". Cuz basically, it didn't.

    I found the solution to this problem. You'll find it in a similar thread that was started here:
    https://discussions.apple.com/message/19042689#19042689

  • FP installer crashes during download after system authentication. Mac OS 10.8.3

    FP installer does not finish the instalation. Crashes during download process.

    I cannot answer any of your questions, but I can point you to a different installer: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

  • Why is aperture 3.4 crashing during import after upgrade?

    After running a typical upgrade from Software update on my mac I have had the problem of importing files into Aperture.
    Exactly what happened and equipment used.  Used SD 45mbs 16gb SD card to import RAW images after a shoot.  This has been working and tested the day before update.  Was prompted to update to Aperture 3.4 along with another update for OSX.  After reboot I launched Aperture and was prompted to update library.  Next SD card was inserted, pictures showed up as previews, all were selected and checked to import all.  Application crashes see below. 
    What I have tired. 
    removed application
    removed preference files
    reinstalled application
    was prompted for upgrade of library
    once done inserted SD to import files
    Same issue files show up but they do not import and same report comes up
    have attempted multiple SD cards with no resolve.
    Able to use disk on another computer with no issue.
    Someone please help

    What Aperture version are you running exactly? Aperture 3.4 or 3.4.1? The 3.4.1 update has some important bug fixes. If you did not install  the last update, I'd recommend to update.
    Some posters had problems with the image capture preferences, after upgrading to 3.4, and that caused troubles during import. Try if removing the image capture preference files helps:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something.plist  remove them too.
    then try again.
    Regards
    Léonie

  • LR4 Crashes During or After GTM Session

    If I try to use LR4 during or after a Go To Meeting session or during or after viewing an mp4 recording of a GTM session it will crash repeatedly no matter what I try to do.
    The only way to use LR4 for me is to reboot the computer. This may not sound like a big deal but much of my LR use is in conjunction with an online class and I need to be able to use it in class.
    It doesn't matter what I try to do in LR4 after a minute or two it will crash, and restarting LR4 makes no difference, it continues to crash until I reboot the computer.
    This happens every time without exception.
    Windows 7 Home Premium 64 bit
    More details about my computer
    Component
    Details
    Subscore
    Base score
    Processor
    Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz
    7.5
    5.9
      Determined by lowest subscore
    Memory (RAM)
    8.00 GB
    7.5
    Graphics
    ATI Radeon HD 5700 Series
    7.4
    Gaming graphics
    4843 MB Total available graphics memory
    7.4
    Primary hard disk
    1158GB Free (1386GB Total)
    5.9

    I've just tested accessing the iTunes library on the NAS from iTunes 10.4 from another machine and iTunes does NOT crash on that machine. So apparently something's awry with the iTunes installation on my Mac Pro...
    What would be the best approach to "repairing" iTunes besides the obvious (deleting prefs)?

  • RoboHelp10 crashes during development after adding Captivate 7 swf

    I think I have found the cause of my RH10 crashes, but I am looking for confirmation before launching a 6 month development project.
    I am embedding CP7 SWFs in RH10 topics.
    ENVIRONMENT
    Win 7 64 bit
    Dell 2 core, 4GB RAM
    RH 10.0.1.292
    CP 7.0.1.237
    If I embed a CP7 demo as in CASE ONE below, RH crashes while I am working on the project. If I generate, the executable runs flawlessly. The crash is always during development. The exact action leading to the crash appears to be random. The crash occurs unpredictably after working on the project for 5-15 minutes.
    If I embed a CP7 demo as in CASE TWO below I have been able to write in RH all day w/o a crash.
    What is so evil about the first case?  I suspect an issue with the baggage files, but can’t imagine what.
    CASE ONE
    The files needed to play the SWF (.swf, .htm, .css and .js) are added as baggage files like this:
    The link to launch the video works like this:
    The generated project plays perfectly, like this:
    CASE TWO
    I clicked inside a topic then did:
    That gave me a topic like this:
    I didn’t put the topic above in the TOC. Instead I created a TOC topic that linked to it like this:
    The generated project plays the topic perfectly, like this:
    The questions before committing to months of development are:
    Did I find the cause of the crash?
    Is it safe to commit to major development using RH as in CASE TWO with the expectation that I will not have RH crashing every 10-15 min?
    Best,
    Ted

    Hi Ted
    Question here. For your case 1, is Captivate open still? Perhaps with that project loaded? I've seen it where things get really wonky if you work that way. It's as if Captivate still has some hooks in the project even after it has generated the output files.
    If that's what you are doing, you might try closing Captivate and see if the crashing stops.
    Additionally, it's worth noting that when Captivate creates the output files and you import them as Baggage into RoboHelp, the HTML file Captivate creates will have different coding than you will see if you simply insert a Captivate SWF into a topic.
    Apologies in advance if you already knew any of this, but here is my own criteria for co-mingling Captivate with RoboHelp.
    If I have a RoboHelp topic that has other information inside and I want that Captivate demo to be viewed right from inside the topic, I'll just insert the SWF. But if that Captivate demo is so large that it really warrants full screen viewing, I'll likely import the files as Baggage and establish a link that points to the Captivate HTML page to open things up.
    Not sure if I've managed to actually help here. But hopefully I've done no harm.
    Cheers... Rick

  • Apple tv crashed during update

    My apple tv has crashed during an update. I has got stuck on step 1 of 2 preparing to update.
    I may have caused this by trying to use during update.
    Should i unplug and start over
    Thanks

    You are not supposed to use while it is downloading and applying the update. It's very likely to have caused the issue. I don't think you can just unplug and start over, though you may try.
    I would suggest grabbing a micro USB cable and restoring in iTunes, which will also download the latest update
    http://support.apple.com/kb/HT4367

  • C6 Firmware crashed during update

    Hello
    I was updating my firmware of my newly bought nokia c6-00 and during the installation i faced outage of power due to load shedding in my city and now my device isn't working its not even booting its just blank black screen and when i tries to boot it up i just feels a minor vibration and that's it nothing more than that 
    i have nokia care point very far from my apartment basically my question is that can nokia make it working again ? It is in full 12 months warranty and this accident happened just after 2 days of my purchase
    i am much worried about it and i have tried all the methods to get it back working which i have found out of nokia support discussions forum
    i dont want to loss my expensive phone
    Thank you and sorry for bad english
    Hamza Butt
    Hamza Butt

    Unfortunately a power outage at just the wrong time during updating process means that there is now no alternative but to take device to a Nokia Care point to re-install the firmware.
    Happy to have helped forum with a Support Ratio = 42.5

  • Bios recovery for HP dv5-1235dx/Vista (64-bit) crashed during update

    My HP Pavillion dv5-1235dx which ran windows vista (64-bit) crashed while updating bios (after my old bios was deleted).  I have tried the start+b+power trick to recover but that option did not work.  HP Support suggests to create a usb key to install bios, however I have repeatedly failed in recovering/installing bios because the instructions are very limited. They mention a "create a usb key" option that I have yet to find that would make the key.  After using the HP UEFI BIOS Update SoftPAQ and extracting files from the bios .exe file, I found the following:
    1 folder (sp45138) with contents below
    3602F21.fd
    3603F21.fd
    ding (wave sound)
    InsydeFlash (application)
    InsydeFlash (text document)
    iscflash.dll
    iscflash.sys
    iscflashx64.sys
    platform (configuration settings)
    So, my questions are as follows:
    Where is the mystery "create a usb key" button?
    What files should I have installed on my usb drive?
    Does anything have to be renamed or formatted?
    Thanks for any help given!

    Hello Ceelion21.  I understand you're trying to recover your computer from a failed BIOS flash.
    I see this question get asked a lot so I have made sure to bookmark the instructions which I found on another website.  Here is a link.
    You should be able to download the BIOS file from HP Support.  I believe you'll need to use an application such as 7-Zip to extract the BIOS file and locate the *.FD file.
    If this doesn't work you'll likely need to have the notebook repaired.  If you'd like to inquire about a repair through HP Support and are in the US/Canada you can give them a call at 1-800-474-6836.  If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
    Let me know the result of the BIOS recovery.  I hope you have an excellent night!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Premiere Elements 11 crashes during playback after adding PiP

    I have Adobe Premiere Elements 11, up to date, and Windows 7 home up to date. This is a new problem that just started with my most recent project. I have done these types of edits and PiP's many times with success with the same type of source video formats, etc.
    The problem: I add a small clip of video over the main video timeline as Picture in Picture. It adds to the timeline successfully and I can even play it back ok (before rendering). If I add a transition to the front of the PiP, it will crash during playback (pre-render). Or, if I render the timeline before adding the transition, it will also crash during playback once it gets to the PiP.
    I tested PiP with still pictures and that works ok, it only crashes on video PiP. I have tested different video formats (from GoPro and from Panasonic camcorder) with the same results (crashes). I have uninstalled Adobe Premiere as well as Quicktime and re-installed them, same results. I am quite frustrated with the constant crashes, especially since I have done a dozen or more videos the same exact way using the same cameras and same types of video files.
    Any help is appreciated.
    Justin

    So I created a new project using the project preset "DSLR 1080p30 @29.97". Everything worked fine in that project using the same source videos and doing PiP (tested with both methods).
    I opened the project that was giving me problems and the PiP worked when using your approach of dropping the PiP clip onto Video 2 then scaling it down. I then deleted that PiP and re-added it the way I was doing it before, and it crashed the first time I tried to play it back.
    I closed down Elements and again tried to reproduce the crash the same way, but this time it worked and did not crash...I tried multiple times to reproduce the crash, sometimes it would, sometimes it wouldn't...
    So, I don't know exactly what the problem is. Lastnight I could reproduce the crash every time by either rendering the PiP or adding a transition to the front of it (then playing it back), every time it would crash. Now it is behaving differently.
    At any rate, I will start using the correct project settings going forward and know that I can PiP using the other method as well. Maybe the project that is giving me problems is just corrupted or something, I'll toss it an start anew.

  • Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

    After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
    Windows could not search for new updates.  Error code 80244004. 
    Richard

    Hi Richard,
    Just addition, please refer to following KB to reset Windows Update components and monitor the result.
    How do I reset Windows Update components?
    If didn’t use ESET security software, please also refer to following thread and check if can help you.
    Latest
    version of Windows Update causing error 80244004
    Hope this helps.
    Best regards,
    Justin Gu

Maybe you are looking for