One Step GI - GR is not getting created for an STO

Good Morning All,
Actually we have made a setup that whenever we create a Goods Issue for STO type (UB - PO ) in the supplying plant we are creating the GR in the background . WE have made the configuration in SAP R/3 version 4.6c with One STEP Movment, that is when we create the GI (351 ) movment then GR (101) should be created automatically. Actually its not working properly. And sometimes it creates the GR with the USer as WF-BATCH.
Let me know where exactly I need to check for the failure.
In such cases if there is error in the background process, means, is there any transaction where it shwos the authorization or other failures happened to the system.
Advance thanks....
regards,
Sabari Prabhu.

Dear Venkadesh,
Which Batch job should i need to check for this.Because I am not seeing any batch job relatred to that.
Regards,
Sabari Prabhu.

Similar Messages

Accounting doucment not get created for Credit Memo

Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advance

Hi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit

Extension folder is not getting created for firefox 4 in Mac OS

in Mac OS 10.6, 10.5, extension folder is not getting created in the profile for the firefox 4.0. Where as in Firefox 3.6 when you launch the firefox first time, profile folder is created and extension folder is also part of that.

That extensions folder will only be created if there are extensions found that need to be installed. If there are no extensions then Firefox doesn't create an empty extensions folder.<br />
On Windows there is a lot of security software that installs extensions globally.
* https://developer.mozilla.org/en/Installing_extensions
* https://developer.mozilla.org/En/Developer_Guide/Customizing_Firefox
* https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry

Inspection lot not getting create for 01 Insp type after Intransit

Hi Qm Gurus,
I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?

Hi ,
Please activate inspection type 08 stock transfer ..
If this inspection type is active then during stock transfer lot gets generated.
Also check QM active for this perticular movement in custamizing setting.
Regards
SANIL

Spool list is not getting created for background job

I am creating background job using JOB_OPEN and then submitting my z-report using submit statement and then closing job using JOB_CLOSE. for this job is getting creating in sm37 and also gets finished but it does not create spool list showing output.
Any idea how to do this?
Thanks in advance.

DATA: lv_jobname TYPE tbtcjob-jobname,
        lv_jobcount TYPE tbtcjob-jobcount,
        lv_variant TYPE variant,
        wa_var_desc TYPE varid,
        wa_var_text TYPE varit,
        it_var_text TYPE TABLE OF varit,
        it_var_contents TYPE TABLE OF rsparams.
REFRESH: it_var_contents, it_var_text.
CLEAR: wa_var_desc, wa_var_text.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-cprog
    TABLES
      selection_table = it_var_contents
    EXCEPTIONS
      not_found       = 1
      no_report       = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE sy-datum sy-timlo INTO lv_variant.
wa_var_desc-mandt       = sy-mandt.
wa_var_desc-report      = sy-cprog.
wa_var_desc-variant     = lv_variant.
wa_var_desc-transport   = 'F'.
wa_var_desc-environmnt = 'B'.
wa_var_desc-version     = '1'.
wa_var_desc-protected   = 'X'.
wa_var_text-mandt = sy-mandt.
wa_var_text-langu = sy-langu.
wa_var_text-report = sy-cprog.
wa_var_text-variant = lv_variant.
lv_jobname = lv_variant.
CONCATENATE 'Batch Job Variant -'(006)
              sy-uname INTO wa_var_text-vtext.
APPEND wa_var_text TO it_var_text.
Create the varaint for the back ground job.
CALL FUNCTION 'RS_CREATE_VARIANT'
    EXPORTING
      curr_report               = sy-cprog
      curr_variant              = lv_variant
      vari_desc                 = wa_var_desc
    TABLES
      vari_contents             = it_var_contents
      vari_text                 = it_var_text
    EXCEPTIONS
      illegal_report_or_variant = 1
      illegal_variantname       = 2
      not_authorized            = 3
      not_executed              = 4
      report_not_existent       = 5
      report_not_supplied       = 6
      variant_exists            = 7
      variant_locked            = 8
      OTHERS                    = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Open the job.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = lv_jobname
    IMPORTING
      jobcount         = lv_jobcount
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
submitt the job in background mode.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
      authcknam               = sy-uname
      jobcount                = lv_jobcount
      jobname                 = lv_jobname
      report                  = sy-repid
      variant                 = lv_variant
    EXCEPTIONS
      bad_priparams           = 1
      bad_xpgflags            = 2
      invalid_jobdata         = 3
      jobname_missing         = 4
      job_notex               = 5
      job_submit_failed       = 6
      lock_failed             = 7
      program_missing         = 8
      prog_abap_and_extpg_set = 9
      OTHERS                  = 10.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
close the job.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = lv_jobcount
      jobname              = lv_jobname
      strtimmed            = 'X'
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      invalid_target       = 8
      OTHERS               = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this will be helpful..

Profile class not getting created for new site for existing customer.

Hi,
I am creating a new site address for an existing customer using Customer Interface in oracle apps 11.5.10.2. The issue is the profile class is not getting assigned correctly at site level. It is getting defaulted with the profile class of the customer. Below is the data that I am inserting in RA_CUSTOMER_PROFILES_INT_ALL
INSERT INTO ra_customer_profiles_int_all
(orig_system_customer_ref
,orig_system_address_ref
,insert_update_flag
,customer_profile_class_name
,credit_hold
,org_id
,last_updated_by
,last_update_date
,created_by
,creation_date
,last_update_login
)VALUES
(x_orig_system_reference -- This is old customer reference as he already exists in the system
,x_address_ref -- This is a new address reference
,'I'
,rec_cust_det.customer_profile_class_name -- In the file I am giving it as 'ABC1' but it is getting defaulted with 'DEFAULT' which belongs to customer profile class at the header level
,'N'
,fnd_profile.value('org_id')
,fnd_global.user_id
,SYSDATE
,fnd_global.user_id
,SYSDATE
,fnd_global.login_id
Can anyone please help me how to resolve this issue. Hope you understood. Otherwise please let me know.
Regards
Dev

Please apply patch 4649221 to get this work.
Regards
Dev

Delivery not getting created for Stock Transfer Purchase order

Hi,
My user having one issue with stock transfer order. User is not able to generate the delivery for the particular material against stock transfer PO. Here checking rule is not maintained.Kindly advice.

Hi
Please, see SAP Note 498143 - FAQ: Stock transfer with delivery in purchasing.
I hope this helps you
Regards
Eduardo

Transport not getting created for certain SPRO settings in Golden client

Hi,
Currently we are in the realization phase of the project ,we are in the process of configuring system in golden client.
For some SPRO configurations ,the system is not prompting for the Transport request.
Kindly let me know if anybody had gone through similar kind of issue.
Regards,
mmuser
Edited by: mm Keyuser on Dec 30, 2009 5:34 AM

Hi,
Please check for the configurational table for which you are facing problem, its delivery class should be "C" under delivery & maintenance.
You can get it checked by your ABAP team.
hope this will help.
Regards,
AK

Required attribute not getting created

Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
tt

Hi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt

ERMS : Email work items not getting created

Hi Forum
In my test system (CRM 2007), inbound mails were properly coming in and getting distributed to agent's inbox. But after the server restart, I realised that the work items for inbound mails stopped getting created due to which mails are not reaching agent's inbox.
Mails are visible in SOIN but their associated Work items are not there in SWI1.
I have checked almost all the settings like Email Distribution (SO28), CRM_ERMS_WF_CUST (Event lining is in place and is active), swu0 (Event simulation is working).... but still not sure why work items are not getting created for inbound mails.
Any thoughts ? Help will be deeply appreciated.
Regards
Vishal Mani

Thanks Bruno for your time to reply !
I checked this transaction and in overview there are 19 events with errors. But apart from that everything is green.
I checked the Linkages with Error tab and realised that the events with errors belong to object type BUS1006.
In Activation tab --> Linkages --> Object type (ERMSSUPRT2) --> Linkage is activated.
Infact that is the first thing, I checked when work items were not getting created.
So no clue from here too.
Regards
Vishal Mani

ESB Instance Not Getting Created

Hello,
I am trying to call one synchronous BPEL using one ESB. This ESB applies DVM while transforming input data into called BPEL format. But it shows some strange results. while calling ESB using any other BPEL
1. ESB instance is not getting created.
2. Synchronous BPEL is getting called but without DVM applied.
But If I use SoapUI to call the ESB, it's working fine. Can any body give me any clue, why is it happing?
Any help is appreciated.
Thanx In Advance,
Nitin

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

AUC Asset not getting created when Internal Order is created

Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
Sanjai

Hi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

Attachment not getting created in PI from CRM

Hi Everyone,
I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
          CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                          EXPORTING
                     input_length = lv_input_length
                     first_line   = lv_first_line
                     last_line    = lv_last_line
                   IMPORTING
                     buffer       = lv_xbuffer
                   TABLES
                     binary_tab   = file_content_binary.
   2. Then I am getting the server context and the protocol.
                       obj_server_context = cl_proxy_access=>get_server_context( ).
                       obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
* Assign File naame to STRING Variable
                       lv_name = lv_filename.
* Attach file to the service response.
                       obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                  data = lv_xbuffer
                                  type = if_ai_attachment=>c_mimetype_pdf
                                  name = lv_name ).
                       APPEND obj_attachment TO t_prx_attach.
                       obj_attch_protocol->set_attachments( t_prx_attach ).
   3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
     With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

Hi Gurus,
Can you please help with some pointers on this.
I have used below links as reference for coding.
Link 1 :
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
Link 2:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
Thanks in Advance,
Manil.

Spool not getting created in batch job

Hello experts,
We have a requirement of printing BA00, BA01 and LD00 from different application.
We have done same code for all BA00, BA01, and LD00.
Normally the code is working fine except in few cases, when batch job is created but spool is not created.
DATA: job_name TYPE tbtcjob-jobname,
              number   TYPE tbtcjob-jobcount,
              print_parameters TYPE pri_params,
              wv_pripar    TYPE pri_params,
              wv_arcpar    TYPE arc_params,
              wv_val       TYPE c VALUE 'X',
              wv_false     TYPE c VALUE 'X',
              gv_mandt     TYPE tsp01-rqclient,
              gv_user      TYPE tsp01-rqowner.
          CLEAR: gv_mandt, gv_user, number.
          gv_mandt = sy-mandt.
          gv_user = sy-uname.
          job_name = 'DELIVERY_PRINTING'.
          CLEAR: range1.
          range1-sign = 'I'.
          range1-option = 'EQ'.
          range1-low = 'LD00'.
          CLEAR: range1-high.
          APPEND range1 TO range.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              jobname          = job_name
            IMPORTING
              jobcount         = number
            EXCEPTIONS
              cant_create_job = 1
              invalid_job_data = 2
              jobname_missing = 3
              OTHERS           = 4.
          IF sy-subrc = 0.
            SUBMIT sd70av2a WITH rg_kschl IN range
                            WITH rg_vbeln IN deli_tab
                            TO SAP-SPOOL
                          SPOOL PARAMETERS print_parameters
                          WITHOUT SPOOL DYNPRO
                          VIA JOB job_name NUMBER number
                          AND RETURN.
            IF sy-subrc = 0.
              CALL FUNCTION 'JOB_CLOSE'
                EXPORTING
                  jobcount             = number
                  jobname              = job_name
                  strtimmed            = 'X'
                EXCEPTIONS
                  cant_start_immediate = 1
                  invalid_startdate    = 2
                  jobname_missing      = 3
                  job_close_failed     = 4
                  job_nosteps          = 5
                  job_notex            = 6
                  lock_failed          = 7
                  OTHERS               = 8.
              IF sy-subrc <> 0.
              ENDIF.
            ENDIF.
            WAIT UP TO 10 SECONDS.
** to give the data to the printer***
*            CLEAR gv_rqident.
            SELECT SINGLE listident INTO gv_listident FROM tbtcp
                          WHERE jobname = job_name
                           AND jobcount = number.
          IF sy-subrc = 0.
            MOVE gv_listident to gv_rqident.
            CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
              EXPORTING
                spool_request_id = gv_rqident.
          ENDIF.
The same code is for all the output BA00, BA01 and LD00.
The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
Thanks and Regards,
Paritosh Pandey

Hi,
The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
cheers,
Janis
Edit in:
Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
Message was edited by: Jānis B

One Step GI - GR is not getting created for an STO

Similar Messages

Maybe you are looking for