Notification Does Not Exist - System Termination message while direct print

Dear Team
We are using Z Output Program & Z Form for taking Notification print. OID1 has been configured for the same.
Its working fine if Notification 'Print preview' is taken, but it is getting failed if Direct print(No Preview) is given.
When print is given directly from Notification, request is terminated with Message -Notification does Not exist'
This message is coming from FM - PM_NOTIFICATION_PRINT_CONTROL.
Pl guide me in resolving this issue.
Thanks in advance
Ashish

Hi,
At update stage PM_NOTIFICATION_PRINT_CONTROL checks that all information required is available. eg Valid workpapers was called and the data to print was passed over.
<----
If Everything is ok data to print is exported to memory. The main print cycle is started in UPDATE TASK. That means the Individual ABAPS will be called only when COMMIT WORK is issused in MIWO0F00.
As I have never used this FM, please check with your ABAP person to debug the code while printing directly. As per above statement, some of the data may not be passed over while doing direct print.
Also have you done the configuration on OID2 (Definition of papers per order / notification type).
Please check that.
Regards,
Maheswaran.

Similar Messages

HTTP destination IED_100 does not exist (system , transaction SM59)

Hi guys,
When I try to send a xml file to WAS using ABAP Proxy I receive this error message: "HTTP destination IED_100 does not exist (system , transaction SM59)".
I did a test connection in sm59 for http connections/R/3 systems and the messagem bellow is ICM_HTTP_CONNECTION_FAILDED.
What could be wrong?
Thanks in advance,
Ricardo

Hi Sridhar,
Im trying connecting XI to WAS 6.40 using ABAP Proxy.
Now I receive this error message: <SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as Integration Engine</SAP:Stack>
I have defined my business system IED_100 (WAS 6.40) like application system and the related integration server is XI. Its correct?
When I check the component monitoring > Integration Engines > Proxy runtime IED_100, this message is displayed:
Unable to log on to system IED_100 in language en with user XIRWBUSER. But in WAS system (IED_100) I dont have a user XIRWBUSER!!! I need to create it?
Tell me if Im correct: I dont need any RFC adapter; Im only need an XI adapter (http) to send the xml file to ABAP proxy (IED_100) and on IED_100 I need to activate XI message format service in SICF and create a RFC connection in SM59 to call XI integration server. This is already done!
In sm59 I continue with ICM_HTTP_CONNECTION_FAILED
Thanks in advance,
Ricardo.

Error message "Location XYZ does not exist for item1" Message no. BBP_PD047

Hi all,
When i do confirmation for PO in SRM, the system gives error message "Location XYZ does not exist for item1" when i enter Location for the plant thought the Location is mapped to Plant in ECC system. System shows error when i click on check button, it allowing me add locations.
This is happening when confirming the PO line items having differernt plants and it is not happeing all the time, sometimes it does't work. I
f all the line items have same Plants, there is no issue.
I am not able to understand why it is working some time and not working other time.(message no: BBP_PD047 in SLG1)
can some one help me in understanding this?
Thanks,
Ravi

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

File does not exist: /java/classes message in Apache error log file

I am getting several of these messages in the Apache error logfile.
File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)
Is it normal to see this messages or some configuration is wrong?
thanks,
Azodpe

Please post the details of the application release, database version and OS.
I am getting several of these messages in the Apache error logfile.
File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)Is this the complete error message?
Is it normal to see this messages or some configuration is wrong?If your application is functioning properly with no issues, then you can ignore those errors.
Thanks,
Hussein

"Postal code does not exist" - bypass error message in CREMAS

Hi.
I am on a client implementing ALE between HR+Travel and FI/CO.
Vendors are created in HR and send to FI/CO with the IDoc CREMAS.
They don't want to validate the Postal Codes and Cities in the Vendors' Master Data.
But the IDoc ends with the status 51 and the message:
R5(510): "Postal code &1 in country &2 does not exist".
Do you know a way to bypass the validation in this Inbound Idoc in FI/CO?
Is it possible to customize this message to be a warning instead of an error in the IDoc, like it is on the manual entry screen?
Thank you for your help.
Edited by: MDuarte on Jan 9, 2012 11:32 AM

Hi there
I did some checks on this error and in fact found some support issues fixed in BC-SRV-ADR component (but for transaction XK01 directly) however for tcode PRAA there are some additional BADi's and user exits you can check in note 570023 - User exits for the generation of vendors with RPRAPA00, If the address editing in the vendor master record does not suit
your requirements, it can also be changed. For this purpose you have the user exit routine 'set_address_by_user'.
However specifically in XK01, this was alleviated by removing the flag CITY FILE ACTIVE for the relevant country.
If CITY FILE ACTIVE is disabled, it will disable regional structure checks, similarly POSTAL CODE CHECK will disable postal code checks. (See the F1 help)

Why does my LabVIEW Run-time server return the message "source does not exist Last UI message: Start Execution"?

I am trying to build a stand-alone application on a target pc for which I have built a LabVIEW server that TestStand can use as an adapter.
In order to do this, I searched this site and found the topic: "How do I build and Use the LabVIEW Operator Interface as a LabVIEW ActiveX Run-time server?" After following the procedure to the letter, I ran the testexec.exe file as instructed and loaded my sequence file. As soon as I try to "Single Pass" or "Test UUT" I get an error which says "source does not existLast UI message: Start Execution". This error appears when running the testexec.exe file on the target pc or the development pc.
I have found though, th
at if I open the Operator interface through the Start: Programs>National Instruments>TestStand>Operator Interfaces>LabVIEW then the sequence file runs without these errors.
Any ideas why this is happening?

Hello Robroy,
The KB you mentioned explaines how to build the LV Operator Interface (OI). So, I assumed you built the LV OI and also configured the LV adapter to use the TestStandGUILVRTS server without problems.
The error you are getting may be due to missing VIs. In other words, the LabVIEW OI may not be finding all the VIs your sequence is calling.
In order to deploy sequences that call VIs, you need to first run Tools >> Assemble VIs for Runtime Distribution. This tool gets all the VIs your sequence needs and saves in a separate directory.
For more information, you may check the TestStand User Manual chapter 17, it describes how to distribute TestStand and sequences.
Regards,
Roberto Piacentini
Applications Engineer
National Inst
ruments
www.ni.com/ask

"Does not meet system requirements" message for Aperture 3

I am wanting to trial Aperture 3. My mac meets all the system requirements listed on the Aperture site as far as I can tell. However, when I try to load the trial, I receive a message stating that I do not meet system requirements. Any suggestions as to what might be my problem?

Hi Schmidt3;
I am using Aperture 2 on my PowerMac G5 Quad without any problems.
Allan

Subject Profile Category does not exist

Hi,
System: CRM2007
I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
"Subject profile category Y does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001"
Why does it not work?
Thanks
Anke

Hi,
For which scenario are you using the subject profile??
If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
Regards,
PePe

Subject profile category does not exist CRM_SUBJECT_PROFILE001

I have configured charm in our Dev system.
In transaction solution_manager ->change request management-> create
I get the following message:
Subject profile category does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001
Did I miss something in the configuration?
I configured a test system some time ago and did not have this issue.
Thank you!

Answer found, note 898614

Error - Business partner 30000011 does not exist in role TR0151

Hello,
I am receiving an error "Business partner 30000011 does not exist in role TR0151" while creating a Fixed Deposit Transaction through FTR_CREATE.
Whilst testing Fixed Deposit accounting in SAP Treasury, i was testing a scenario of a MINOR and his/her GUARDIAN. Both have been created as Business Partners. However, i have NOT created the Minor further as a Customer.
I now have a MINOR defined as a Business Partner, a GUARDIAN defined as a BUSINESS PARTNER and CUSTOMER both and a relationship established between the two through the RELATIONSHIPS tab.
After doing the above, i am trying to create a Fixed Deposit through FTR_CREATE where i am receiving the above mentioned error.
In Customizing, i have checked that the TR0151 is assigned to COUNTERPARTY role and TR0154 to the BENEFICIARY role
The GUARDIAN was created with BP role - Business Partner General and then changed to COUNTER PARTY. The MINOR has been created with BP Role - Business Partner General and then changed to BENEFICIARY.
My expectation was that since MINOR is not defined as Customer, the system would not allow me to create a FD for the Minor and display such a message which would ask me to create the FD using the GUARDIAN as the Business Partner.
Request your help on this.
Regards,
Murtuza.
+91 9923205169

Hi,
It is not necessary that a business partner has to be linked to a customer account. In certain cases, your house bank itself acts as a counterparty, in that case you can directly settle to your bank account instead of managing through a customer.
For your case, you need to maintain the role of counterparty for MINOR as well. Only if the business partner exists in that role can you create a transaction.
Regards,
Ravi

ICF SERVICE NODE FOR THE APPLICATION DOES NOT EXIST.

Hi All:
i am getting the following error when trying to execute my applications in abap webdynpro.
The following error text was processed in the system BIS : WebDynpro Exception: ICF service node for application does not exist
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
can anybody help me out.
relevant answers will be awarded...
Regards:
Arun

Hi,
see the information on ICF service nodes <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm">here</a> and also take a look at SAP notes 517484 and 1009930 and 1008689
Regards, Heidi
For information on creating services (if they are not created automatically), see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm">here</a>
Message was edited by:
Heidi von Geisau

Tax code V0 country IN does not exist in procedure ZAXINN

Dear All,
The system is throwing the error Tax code V0 country IN does not exist in procedure ZAXINN while doing the MIRO:
Pls. note that the same problem has already been discussed in the forum & I have tried the same but we are stuck on the same point.
Someone has suggested to maintain Tax Code using FV11; What condition type do I need to maintain?
Also tell me whether we need to maintain NAVS : Non-Deductible Tax & JEXS : Taxes on the PO in the Import Pricing Procedure. One of our FI friends has suggested the add the same. Pls. guide.
One more problem
Would request to look into the following problem tooo..
Regards,
Pramod Kumar
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.

Hi,
Once you make sure V0 is assigned to tax procedure ZAXINN, Counrty- India, also try:
In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
Hope this helps!
Regards,
Shilpa

Object does not exist (status management)

Hi,
When I create a notification and click save button, I am getting the following error.
Object does not exist (status management)
Message no. IM258
Diagnosis
This refers to an error in central status management.
Task status
The central status management connection at task level will only be supported from Release 3.0.
For this reason, no task status is available for statuses created before changing to Release 3.0, and status change is therefore also not possible.
Procedure
In the case of task statuses of notifications in releases prior to 3.0:
When you save a notification you can create a status for the tasks.
In the case of notification or task statuses for notifications from Release 3.0:
Please refer to your system administrator.
thanks and regards
muru

Dear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar

Package javax.mail does not exist (Still having trouble)

Good Morning
I know that there are several posts regarding issues with javamail. I have viewed them for the past hour. While several of them address my issue I have been unable to locate a solution.
Bare with me please, I am making this post very thorough. The other threads I have read are frusterating because the problems people tend to post are not clear.
I am trying to run "msgsend" which is a provided demo of javamail-1.4 using command prompt (start - run - cmd) with the javac command.
The output below is directly pasted from command prompt and written in bold.
C:\download\javamail-1.4\demo>javac msgsend.java
C:\download\javamail-1.4\demo>javac msgsend.java
msgsend.java:44: package javax.mail does not exist
import javax.mail.*;
^
msgsend.java:45: package javax.mail.internet does not exist
import javax.mail.internet.*;
^
msgsend.java:140: cannot find symbol
symbol : class Session
location: class msgsend
Session session = Session.getInstance(props, null);
^
msgsend.java:140: cannot find symbol
symbol : variable Session
location: class msgsend
Session session = Session.getInstance(props, null);
^
msgsend.java:145: cannot find symbol
symbol : class Message
location: class msgsend
Message msg = new MimeMessage(session);
^
msgsend.java:145: cannot find symbol
symbol : class MimeMessage
location: class msgsend
Message msg = new MimeMessage(session);
^
msgsend.java:147: cannot find symbol
symbol : class InternetAddress
location: class msgsend
msg.setFrom(new InternetAddress(from));
^
msgsend.java:151: package Message does not exist
msg.setRecipients(Message.RecipientType.TO,
^
msgsend.java:152: cannot find symbol
symbol : variable InternetAddress
location: class msgsend
InternetAddress.parse(to,
^
msgsend.java:154: package Message does not exist
msg.setRecipients(Message.RecipientType.CC,
^
msgsend.java:155: cannot find symbol
symbol : variable InternetAddress
location: class msgsend
InternetAddress.parse(cc,
^
msgsend.java:157: package Message does not exist
msg.setRecipients(Message.RecipientType.BCC,
^
msgsend.java:158: cannot find symbol
symbol : variable InternetAddress
location: class msgsend
InternetAddress.parse(bcc,
^
msgsend.java:167: cannot find symbol
symbol : class MimeBodyPart
location: class msgsend
MimeBodyPart mbp1 = new MimeBodyPart();
^
msgsend.java:167: cannot find symbol
symbol : class MimeBodyPart
location: class msgsend
MimeBodyPart mbp1 = new MimeBodyPart();
^
msgsend.java:169: cannot find symbol
symbol : class MimeBodyPart
location: class msgsend
MimeBodyPart mbp2 = new MimeBodyPart();
^
msgsend.java:169: cannot find symbol
symbol : class MimeBodyPart
location: class msgsend
MimeBodyPart mbp2 = new MimeBodyPart();
^
msgsend.java:171: cannot find symbol
symbol : class MimeMultipart
location: class msgsend
MimeMultipart mp = new MimeMultipart();
^
msgsend.java:171: cannot find symbol
symbol : class MimeMultipart
location: class msgsend
MimeMultipart mp = new MimeMultipart();
^
msgsend.java:185: cannot find symbol
symbol : variable Transport
location: class msgsend
Transport.send(msg);
^
msgsend.java:193: cannot find symbol
symbol : class Store
location: class msgsend
Store store = null;
^
msgsend.java:195: cannot find symbol
symbol : class URLName
location: class msgsend
URLName urln = new URLName(url);
^
msgsend.java:195: cannot find symbol
symbol : class URLName
location: class msgsend
URLName urln = new URLName(url);
^
msgsend.java:212: cannot find symbol
symbol : class Folder
location: class msgsend
Folder folder = store.getFolder(record);
^
msgsend.java:218: cannot find symbol
symbol : variable Folder
location: class msgsend
folder.create(Folder.HOLDS_MESSAGES);
^
msgsend.java:220: cannot find symbol
symbol : class Message
location: class msgsend
Message[] msgs = new Message[1];
^
msgsend.java:220: cannot find symbol
symbol : class Message
location: class msgsend
Message[] msgs = new Message[1];
27 errors
Here are the methods I have tried...
1. Make sure you have most current version of Java
2. Reinstall Java
3. Attempt to compile in an IDE (Attempted in Eclipse 3.2)
4. Set class path
Some sources suggest "CLASSPATH" some suggest "CLASS PATH" as the variable name. I have tried both.
Below is what the classpath looks like in bold.
Variable Name: CLASS PATH
Variable value: c:\download\javamail-1.4\mail.jar;C:\download\jaf-1.1\activation.jar;.
I have double checked all folder names and copy pasted all entries to eliminate typos. Javamail-1.4 and jaf-1.1 are both located in c:\download which is the same location Class Path points to.
Thank you very much for your input and effort. I can imagine how frusterating it is responding to 20million javamail posts :) (that may be a bit of an overstatement!)
Thank you again!
Irbi
Message was edited by:
irbi
Message was edited by:
irbi

Yes - I have read that part of the README and did exactly as it has said in a previous attempt. I should have mentioned that here I'm sorry :)
I moved the .jar files into the download folder and set the classpath exactly as the readme shows.
When I do that the msgsend.java compiles correctly but it still does not run.
Below is what happens.
C:\download\javamail-1.4\demo>set CLASSPATH=%CLASSPATH%;c:\download\javamail-1.4
\mail.jar;%CLASSPATH%;c:\download\jaf-1.1\activation.jar.
C:\download\javamail-1.4\demo>javac msgsend.java
C:\download\javamail-1.4\demo>java msgsend.java
Exception in thread "main" java.lang.NoClassDefFoundError: msgsend/java
C:\download\javamail-1.4\demo>
I have tried fixing this error as well via forums and FAQs but it seems to be the most generic error.
One suggestion was to clear your classpath. I tried this with a test hello world program which was giving the same error - "NoClassDefFoundError". By clearing the classpath I was able to get the hello world program to run without this error. But I can't just clear the classpath in this instance because it needs to point to mail.jar and activation.jar for the program to compile.
Thanks again for all of your efforts. You are more appreciated than you know.

T-code kbk6 (actual posting price) error " Layout 1-N01 does not exist. "

i tried to see t-code kbk6 (actual posting - actual price)
it's have error Layout 1-N01 does not exist. full error message i show you below.
how should i do. i tried to create 1-N01 in KP65 (create planning layouts for cost element planning)
i got error message You chose a name in a reserved name range -> Choose another name
what should i do ?
please help.
Layout 1-N01 does not exist.
Message no. K9151
Diagnosis
Planning layout 1-N01 entered by you or set by the planner profile does not exist in the current client.
This can have the following causes:
The planning layout has not yet been created in Customizing.
The planning layout is a layout delivered by SAP that has not yet been imported into the client to which you have logged on.
SAP planning layouts begin with a number, user-defined planning layouts do not.
Procedure
If you require the user-defined planning layout 1-N01, you must first create it in Customzing.
If planning layout 1-N01 is a layout delivered by SAP, you must first import this from client 000 in Customizing.
a) For layouts from General Controlling, choose Controlling -> General Controlling -> Production Start-Up Preparation -> Transport System Settings -> Transport Settings for Planning -> Import Standard Planning Layouts.
b) For layouts from Profit Center Accounting, choose Enterprise Controlling -> Profit Center Accounting -> Tools -> Transport Customizing Settings -> Transport Settings for Planning -> Import Planning Layouts.

Hi
The solution is outlined in the long text of the error, you need to import 1-N01 from client 000.
To import the Standard Planning Layout 1-N01 from Client 000 use transaction code OKBF. The menu path is SPRO - Controlling - General Controlling - Production Start Up Preparation - Transport Settings for Planning - Import Standard Planning Layouts.
Find the layout and execute the import. This should resolve the error.
Elaine

Notification Does Not Exist - System Termination message while direct print

Similar Messages

Maybe you are looking for