Notification Items Tab Enhancement
Hi,
I am re-posting my message in this forum, because I'm not sure what forum is the relevant one.
We have a requirement to add new column to notification's items tab: material number.
I have seen that QMFE-MATNR field is defined in DB, but I haven't seen that it is being exposed in any standard tab.
1. Is there any standard items tab which contain that field (Material number)?
2. Is there any documentation about enhancement of notification items tab?
(I have found enhancements QQMA0001, QQMA0008, but they contain only header data/one item data, whereas I need to display a table of all items)
Best regards,
Shai
Shai,
If its the table-control you want to change, then there is no user-exit or BADI for this purpose.
PeteA
Similar Messages
-
PM Notification - Item level user-exit
Hello there!
I'm trying to use QQMA0008 user-exit (User Subscreen for Additional Data on Notification Item) in order to add new fields to my notification item, but system is just trying to hinder my purposes... And it's at its best!
I've already customized my client requirements regarding to Notification Header (via QQMA0001 user exit), but I'm facing several new handicaps with the Item enhacement, so let me explain the steps I've followed and, please, make me see reason if anything is wrong with my (unfinished) procedure.
- <b>CMOD</b>: I've created a project and add the suitable components to it. Project is active and I'm sure there's nothing wrong with it (because there are some other enhancements in it, such as the "User Subscreen for Notification Header" I've talked you about, <b>QQMA0001</b>, which is actually working as it should)
- <b>SE80 / SCREEN PAINTER</b>: I've developed a test screen which is, in fact, associated to the user exit I'm trying to get to work: <b>SAPLXQQM 0210</b>
- <b>IMG</b>: <i>Cross-Application Components / Notification / Notification Creation / Notification Type / Define Screen Templates / Define Screen Areas and Tabs</i> ( ? )
What am I suposed to do right now? I mean, if I select my Item tab (<b>10\TAB10</b>), all Screen Areas (sreen blocks) are "grey" (I mean, there's no possible input for these five fields). How can I make the system know it has to show my custom screen/subscreen in the Notification Item tab? It was pretty easy when I worked with the Header, I've just used the "Aditional Data" tab (<b>10\TAB02</b>) and selected the Customer Subscreen (One Screen/Not.Type), '<b>090</b>', in the first Screen Area (it was obviously in "white" mode, I mean, allowed input mode)...
But I just don't know what to do with the Item parametrization! Can you please help me with this matter?
On the other hand... What do I have to do with <b>TQSUB</b> table? I've included a new line in it in order to let the system know about my Header custom dynpro (<b>SAPLXQQM 0100</b>), but now it doesn't allow me to do the same thing (and I can swear you I don't know why)!
System displays the following error message:
Diagnosis
Entries in table TQSUBT cannot be edited in connection with customizing object TQSUB S as table TQSUBT does not belong to customizing object TQSUB S, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.
Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Any ideas?
Thanks in advance, any help will be (kindly) appreciated.
Greetings from Switzerland!Hi
For this u need to implement the ehancement spot. To achive this u need to implement the ehancement spot in include
LMEPOF7X. And modify the required field in structure mepo.
Regards,
Raghavender. -
ITEM tab in the Approval Process overview IN srm 7.0 AND EP 7.1
Hi Friends,
I am working in SRM 7.0 with EP 7.1..
1 . I have to remove 'ITEM' tab in the approval process overview screen which is apprearing in Portal. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
Any idea
John.Hi Masayuki,
Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM -
ITEM tab in the Approval Process overview
Hi Friends,
I am working in SRM 7.0 with EP 7.1..
1 . I have to remove 'ITEM' tab in the approval process overview screen. approval process overview screen will be appeared when 'Display / Edit Agents' Button in the Header level of the Shopping cart screen.
2 . Remove Approval Process overview tab in the detail screen of the shopping cart.
Any idea
John.Hi Masayuki,
Thank you for your quik reply.
can you please explain little bit more on this..
2. tab
Easy way is right click, User Setting -> Hide Tab. or User Setting -> More.. Remove display tab
I tried this option but this is each user setting , Can we make this centerlized?
or
Go to SE80 Webdynpro and change the visible property.
I know the webdynpro for this tab but to change this visible property do I need have access key( Core modification ) or any other way to do such as enhancement spot?
John.
Edited by: John peter on Jul 10, 2009 11:16 AM -
Search option in catalog selection in maintenance notification item, object
Dear Experts,
I have a problem to search & choose the relevent catalog codes in maintenance notification item, in catalog selection pop up when F4 done on object part. Is there any setting to find the relevent codes from the cataloge selection screen or any setting for the FIND option availabilty on the catalog selection pop up.
We are using ECC 5.0.
Kindly provide the solution.
Regards,
TusharTushar,
Your emphasis is on Relevant Codes. This means codes relevant to the Technical Object (Equipment or Functional Location)
For this purpose only SAP has given the functionality Catalog Profile.
Create a Catalog Profile (OQN6) in which you mention the codes relevant to the technical object.
Now mention this Catalog Profile in the Organisation tab of the Technical object. (Equipment or Functional Location).
After this whenever you create a notification on such Equipments/FLs, you will get only those catalogs which you've mentioned in the Catalog Profile
Hope this helps you.
Regards
Jogeswara Rao
PS: Creating a catalog Profile is a IMG activity, which you have to do in Client 200> generate a request> and transport this request to the client of your working. -
Custom fields on shipping notification (ASN) tab in PO.
Hello Guys,
We are on SRM_SERVER 550 service pack SAPKIBKT07.
We would like to add custom fields on the shipping notification (ASN) tab in PO.
To do so we had gone through the OSS Note: Note 672960 - User-defined fields 2.
But couldnt find the structure in which the custom fields can be added. More over we are not running on SUS.
Currently we are creating ASN through XI interface. Using Sproxy We had called the function module BBP_DDN_UPDATE to create the ASN.
Do let us know if any details are needed.
Appreciate your help.
Thanks,
RamaHi Rama
Please check this out
You can add custom fields in a separate tab in header using the below 2 BADIs.
1. ME_GUI_PO_CUST
2. ME_PROCESS_PO_CUST
For above BADI's create screen ...and assign the screen group and screen no for that implementation....
Please take help of Good Technical ABAP resource
Below example may not be directly relevant but you can work on this guidelines
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group description
zs creating badi --- (save)
click on (label tab pages) u2013 new entries
number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS
(desc u2013 impl for cust) u2013 (save)
interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
-- (activate) u2013 (back)
Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS1
(description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
(save) --- (activate)
6)(SAVE) --
Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
Goto SE51 -- Prog : ZQW
Screen : 200 (Create)
Goto layout u2013 design the screen
7)save u2013 activate
then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler -
In IW51 planner group should come based on object in item tab
Hi ,
In iw51 t code in 2nd screen , after entering data in object in item tab , i need to populate planner group based on object. i got these two fms EXIT_SAPLIWO1_005, EXIT_SAPLIWO1_004.
But they are not working, please guide ...
thanks
ramakrishnaHi
with IW51 you can create notification
"BAPI_SERVNOT_CREATE" BAPI can be used to create notification
Please try this to populate values.
Regards,
Prajakta -
Status for a PM notification item
Hi there!
Is there any way to get a status management for PM notification items?
I know I could use the Tasks tab one but, what about the first tab? Can I include a status management in it?
On the other hand... Is there any way to modify the fields in this table (I mean, PM Notification / Items / Items 1st tab). I would like to include new fields (columns), such a maximum expiry date, and I would also like to exclude some of the standard ones.
Thanks in advance, any help would be kindly appreciated.
Greetings from Switzerland!Hello there, Thomas, thanks for your reply!
Is it an Universal Worklist configuration matter? Well, I don't really know it for sure, I guess I'm a little misleaded about that (I had never meddle in PM before)
If it is as you say it is... Can you please email me your UWL guide? I'll have a quick look at it and try to see what happens...
My address is [email protected]
Thanks a lot and greetings from Switzerland (again)... -
Modify detail Screen for notification item
Hi experts,
I want to modify the detail screen for a notification item (FG: IQS0 - Dynpro: 3030). Using enhancement QQMA0008, i can implement a subscreen located in function group XQQM. Unfortunately this seems to be limited to 3 lines only. Is it possible to pop up a full customer screen here?
Thanks in advance!
Best RegardsI don't think so, but start with [Note 36889 - User subscreens in quality notifications|https://service.sap.com/sap/support/notes/36889]
Regards,
Raymond -
Change description of the Excise item tab in MIGO
Hi,
We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
Please suggest me any config.
Thanks
Shital DHi,
The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
You can not change here & you have few options to declared the material under which material categories.
You can keep all raw material as raw material & Consumable as asset.
But if your business needed very much, Just have a discuss with ABAPer for your requirement.
Regards,
Biju K -
Sales Analysis Item Tab Function Not Showing Orders Dollars
Hello Gurus of SAP B1.
This pertains to SAP B1 SP 00 PL 16 Version 8.8.
While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
Does anyone know why this might be happening and/or how to fix this???
Thanks in Advnace - ZalThanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting. My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also. I am certain I have done it before in SAP 2007A...
Has there been a change to the item/sales order table in Version 8.8???
Take care my FFF - Zal -
Sales Analysis Item Tab Displays Zero Dollars for "Orders"
This pertains to SAP B1 SP 00 PL 16 Version 8.8.
While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab??? Strange that a button would be displayed which does not work...
Does anyone know why this might be happening and/or how to fix this???
Does SAP plan on fixing this in any upcoming patch levels???
Regards - Zal
Responses received from SAP B1 Core Forum:
Sales Analysis Item Tab Function Not Showing Orders DollarsThanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting. My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also. I am certain I have done it before in SAP 2007A...
Has there been a change to the item/sales order table in Version 8.8???
Take care my FFF - Zal -
Query to mimic the items tab of the Sales Analysis report.
Hi there,
I'm currently looking to create a query that mimics the behaviour of the Sales Analysis report in B1. The items tab of the Sales Analysis report provides all the data I require - the only issue is that I would like to merge this data with some other data regarding current on hand stock quantities etc. and therefore I would like to be able to pull out the query behind the Sales Analysis report.
I'm assuming this cannot be done and therefore I'm attempting to build a query to replicate the results. The query needs to show Item No, Item Description, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for items within a given period.
If this can be done relatively easily, can the query then be modified to show all items (including items that haven't sold in the date range) merely with '0' for Quantity Sold, Sales Amt etc. if the item hasn't been sold in the period, and the appropriate figures if each of these columns if the item has sold. I assume some kind of CASE statement can be used to generate this.
So the query needs to show Item No, Item Description, Current quantity in stock, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for all items within a given date range.
I hope you can assist me with this problem.
Thanks
Grant.Hi,
Thanks Gordon that was exactly what I needed.
I've been trying to add some additional columns to the query but I'm experiencing some errors and I can't quite tell why.
Basically, here's the code from another working query I have which I wish to merge into the query you've suggested above:
SELECT T0.[ItemCode],
T0.[ItemName],
T3.[ItmsGrpNam],
T4.[Name] AS [Sub-Category],
T5.[Name] AS [Sub-Sub-Category],
T0.[CardCode] AS [Pref Supplier],
T6.[FirmName] AS [Brand],
T0.[U_Range],
T0.[OnHand],
CASE WHEN T0.[StockValue] = 0 THEN 0 ELSE T0.[StockValue] END AS [StockValue],
T1.[Price] AS [PBK GBP Price],
CASE WHEN T0.[OnHand] = 0 THEN T0.[LastPurPrc] ELSE T0.[StockValue]/T0.[OnHand] END AS [Ave Cost],
CASE WHEN T0.[OnHand] = 0 THEN T1.[Price]-T0.[LastPurPrc] ELSE CASE WHEN T0.[OnHand] > 0 THEN T1.[Price]-T0.[StockValue]/T0.[OnHand] END END AS [Margin],
CASE WHEN T0.[OnHand] = 0 AND T0.[LastPurPrc] = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] > 0 AND (T0.[StockValue]/T0.[OnHand]) = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] = 0 THEN (T1.[Price]-T0.[LastPurPrc])/T1.[Price]*100 ELSE CASE WHEN T0.[OnHand] > 0 THEN (T1.[Price]-T0.[StockValue]/T0.[OnHand])/T1.[Price]*100 END END END END AS [Margin %],
T0.[LastPurPrc]
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[ITM1] T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[OITB] T3 ON T0.ItmsGrpCod = T3.ItmsGrpCod LEFT OUTER JOIN [dbo].[@U_SUBCATEGORY] T4 ON T0.U_Subcategory = T4.Code LEFT OUTER JOIN [dbo].[@U_SUBSUBCATEGORY] T5 ON T0.U_SubSubCategory = T5.Code INNER JOIN OMRC T6 ON T0.FirmCode = T6.FirmCode
WHERE T0.[OnHand] >= 0 and T0.U_Range not in ('E','X')
ORDER BY T0.[ItemCode]
Essentially I just wish to add the fields which are specified in the query above, but not in the query you've already suggested:
SELECT T0.ItemCode,
Max(T0.ItemName),
Max(IsNull(T0.OnHand,0)) 'In Stock',
SUM(IsNull(T1.Quantity,0)) 'Quantity',
Sum(IsNull(T1.LineTotal,0)) 'Sales Amt',
SUM(IsNull(T1.GrssProfit,0)) 'Gross Profit',
Case WHEN Sum(Isnull(T1.LineTotal,0)) = 0 THEN 0 ELSE
SUM(IsNUll(T1.GrssProfit,0))/Sum(Isnull(T1.LineTotal,0)) * 100 END 'Gross Profit %'
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode=T0.ItemCode
LEFT JOIN dbo.OINV T2 ON T2.DocEntry=T1.DocEntry AND T2.DocDate Between [%0] AND [%1]
GROUP BY T0.ItemCode
I was hoping it would be fairly straight forward but so far I've had limited success.
What am I missing here?
Thanks in advance! -
Cancelling the GR the excise item tab is not coming after flagging the OK
Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinhastill not cleared
-
Change description of excise item tab Raw material to Input material
Hi,
We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
Please suggest me any config.
Thanks
Shital DHi,
The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
You can not change here & you have few options to declared the material under which material categories.
You can keep all raw material as raw material & Consumable as asset.
But if your business needed very much, Just have a discuss with ABAPer for your requirement.
Regards,
Biju K
Maybe you are looking for
-
How to install xp on windows 7 system (dual boot)
Hi all! I have Lenovo s10-2 with 3G module and Windows 7 start edition originaly installed on it. Beacause the system is very slow I want to install xp home via usb. And I woud like to have both systems working. Is the any tutorial how to do it? And
-
Photoshop cs3 crashes when I touch the Menu Bar
Photoshop cs3 on my MacbookPro OsX 10.7.5 crashes when I touch the Menu Bar. Ive reloaded it with no result. Any ideas?
-
How can I create another user id so that both my ipad and ipod will not share the same id?
-
How to create a Column that will "carry over" values
I have the first 5 colums of the following table and I would like to create the last column (Carryover). The calculation for carryover (current row) is PRIOR_DAYS_OF_SUPPLY(current row)-DAYS_BTW_REFILL(current row)-carryover (prior row) This is trick
-
SunPKCS11's keystore requirements (fails to build certificate chain)
According to http://java.sun.com/javase/6/docs/technotes/guides/security/p11guide.html#KeyStoreRestrictions in order to build a certificate chain, SunPKCS11 performs the following to match certificates: From the end entity certificate, a call fo C_Fi